Label Based Menu font not changing

When using the label based menu I am changing the font size from 13 to 16, setting it as bold, changing the color and saving the model.  However, non of these changes are showing in preview mode or when exporting to pdf. How can I get this to work properly?

Hi Suzanne,
you need to install SP1, as this bug has been fixed there.
You can download SP1 here:
https://smpdl.sap-ag.de/~sapidp/012002523100007532212008E/cx2008_sp1.zip
You can find details on how to install in the message
Please install SP1 before posting!
Best regards,
Margaret

Similar Messages

  • Changing the label name in a label based menu

    Hello,
    In my current dashboard, i have been forced to change the front page label name in a label based menu quite late on in the design. However, this has consequently resulted in the front page not showing up until after I have clicked the mouse. Previously the front page just showed automatically. Has anyone had this problem before?
    Thanks,
    Dilip

    Hello both, i managed to solve this issue by linking the label based menu to entirely new cells. This is not ideal but at least it saved me having to re-do a lot of my work.
    Thanks for your help, dilip

  • Label Based menu not working in ppt

    I have created an xlf file with label based menu and added it to a ppt containing several slides. Now when I run the slide show, it goes to the next slide if I do not click any other label. But if I click one of labels and then want to move to the other slide in slide show, it just gets stuck.
    Can anybody address this please.

    Can anybody please address this issue. I have been searching through everyplace possible for a solution. No success.

  • The link open in the same window - Label based menu

    Hi All,
    I'm using Xcelsius 2008.  I add a Selector Component "Selector complonenet > Label based menu". I setup 6 Lable and each one link to a URL. When clicking the label on the generated SWF report, the link opened in a new window.
    So i'd like to know if the link can open in the same window (not pop-up a window and open in it)?I tried to setup it in properties, but it seems there is no way to do this.
    Could I get your guide how to do that? Thank you so much.

    Hello
    I would like to know one thing before answring the question how did you link with an url with the label based menu.
    Did you used the opendocument syntax or what did you used.
    Another method is why donf you use the URL button and map according to your requirement. place the url button on the menu item and change the properties to tranperancy to 0%.
    Thanks
    Santhosh V
    Edited by: Santhosh Vudarla on Nov 19, 2010 12:05 PM

  • Label based menu-clear prompts

    Hi everybody..i used a label based menu and i want to clear all prompts when based menu change.(i have 6 querys)
    how can achieve this ?

    Hi,
    I am assuming you have 5 Labels in Label Based Menu .
    And 6 Queries 6 Prompts (This prompt is different that Menu name ).
    You can create 1 combo box (5 Label Name ) with selected Item (Destination of Label inserted cell ).
    Add 6 series (6 Queries )
    Pass blank value from source (Any worksheet cell range ) To Destination (Respective Query Prompt dependent cell ) Trigger cell of respective query .
    Make sure your queries refreshing method is based on those trigger cell(s) .

  • First tab of Lable Based Menu is not visible in Preview Mode

    HI Genious,
    I have added one Lable Based Menu in my application. If i apply the dynamic visibility to it, in preview mode 1st tab is not visible all other tabs are visible.
    Ex. In Lable Based Menu, I have three label :- Distribution  Center, Zoo, Bird Park. I have applied dynamic visibility to this component. In preview mode, I am not able to visible the first label (i.e. Distribution Center) while all other labes are working properly.
    While i remove the dynamic visibility, All the labes are visible. But my application is not like that so i could not adapt that solution.
    Regards,
    Rishit

    Hi Rishit,
    Please let me know if you have applied Fix pacK3 for Xcelsius.
    I have seen this issue in FP2, which got fixed in FP3. The workaround you can try is including a blank cell.
    Thanks,
    Amit.

  • Battery status icon in menu bar not changing

    My battery status icon in my menu bar either does not change it's status at all, or takes a long time to change after I plug in, or unplug, my power cord.
    I'm not sure what to even try. I've tried removing it from the bar and adding it back with no luck.
    This seems to have happened since the latest Software Update for 10.6.5. I have Build 10H574.
    Thanks for any suggestions.
    Chris

    After charging, my indicator stays at 100%. The only way I've found to find out the real status is to put it to sleep, then wake it up again, then stare at it for about 2 or 3 minutes until it refigures the percentage. I got this battery as a Christmas gift and installed it 3 days ago. I calibrated it per instructions. This is very annoying. I can never quite relax because I'm afraid it's about to run down to zero.
    I'm on a Macbook Pro pre-2008. My new battery came from the Apple store. It's my 3rd battery on this computer and I've never had this problem before. (I hope you find the answer. I rarely go to the Genius Bar, but I've been there twice this week for other issues--I feel like a knucklehead going back a third time so soon). If I find a solution, I'll try to post it here.

  • System Preferences menu have not change with the update

    I just updated from 10.6.6 to 10.8.4 tonight and the first thing I noticed is the reversed scrolling (which is a horrid idea in my opinion for a laptop).  I went to youtube and watched several videos showing me how to to my system preferences -> Track Pad -> Scrolling and Zooming tab -> Unselect natural Scrolling.
    However, when I go to my system preferences -> Track Pad I only have one tab and it is the exact same as my 10.6.6 system preference menu and not the new one that everyone shows on the youtube videos.
    How can I fix my system preferences to be updated and how can I go back to normal scrolling?  Old habits are hard to die after 5-6 years on my laptop doing it the normal way...

    Nevermind.  I found a check box that is labeled "When using gestures to scroll or navigate, move content in the direction of finger movement."  The box was found above the tracking speed and double click speed.
    I am still curious on why I do not have the three tab options that everyone has.

  • Font not changing

    hi - I recently loaded 4 new fonts. since then I'm restarted my pc.
      In illustrator, 3 of the fonts work fine but the last one, aurulent_sans_mono, isn't working: I can select it in the font selection drop down menu but as soon as I hit enter/tab/whatever, it reverts back to the previous font. I've opened up all the fonts in Word 2007 and they all work fine. The only difference I can see between this font and the others is that it only comes in regular whereas the others come in bold, italic etc.
      I've had this problem in the past but with other fonts and that time it was in Word so it might not be an illustrator problem.
    any ideas?

    I downloaded it again and reinstalled it, restarted my pc, restarted illustrator, and it still didn't work - but, with my type selected, I went to Type -> Find Font and from there I managed to change it into aurulent_sans_mono ok. but even after that I still can't select it in the other ways. It's probably just a bug but at least I've found a way round it.
    thanks for trying it out

  • Font not changing after a CR in a text box

    I have some vb.net code that fills in a report, including text boxes. Some of the text boxes are used like a header and have a fixed size. When the desired text is entered, sometimes there will be a character indicating a carriage return/line feed goes in that spot to make the text more readable, and is replaced when found.  This works fine.
    What does not work is after the text is set up, the user can change the font. The code then goes through all the objects on the report and changes the font. The problem is that when it tries to change the font on the text boxes where the CRLF is, the font change is applied up to the CRLF, but is not applied to the text after it. I end up with mixed fonts in a text box.
    Is there a special character or method to get the font to be applied correctly? I have tried all combinations (chr(10), chr(13, chr(10) & chr(13), etc) but so far nothing has worked.
    Here is the code I am using to apply the font change:
    Dim objText As ReportAppServer.ReportDefModel.TextObject = CType rcd.ReportDefController.ReportObjectController.GetAllReportObjects().Item(obj.Name), CrystalDecisions.ReportAppServer.ReportDefModel.TextObject)
    objText.FontColor.Font.Name = myFont.Name
    If myFont.SizeAdjustment <> 0 Then objText.FontColor.Font.Size += myFont.SizeAdjustment
    rcd.ReportDefController.ReportObjectController.Modify(CType rcd.ReportDefController.ReportObjectController.GetAllReportObjects().Item(obj.Name), CrystalDecisions.ReportAppServer.ReportDefModel.TextObject), objText)
    One more note - this appears to work fine for formula fields. I just can't seem to get it to work for text objects. I have many reports and I would prefer not to change them all to formulas.
    Edited by: cotsjadixon on Oct 27, 2011 9:32 AM

    I am new to crystal report objects (I inherited the code I am working with), so I need a bit of help. I tried the following code:
                  Dim objText As ReportAppServer.ReportDefModel.TextObject = CType(rcd.ReportDefController.ReportObjectController.GetAllReportObjects().Item(obj.Name), CrystalDecisions.ReportAppServer.ReportDefModel.TextObject)
                  For Each pobj As ReportAppServer.ReportDefModel.Paragraph In objText.Paragraphs
                    pobj.FontColor.Font.Name = myFont.Name
                    If myFont.SizeAdjustment <> 0 Then pobj.FontColor.Font.Size += myFont.SizeAdjustment
                    rcd.ReportDefController.ReportObjectController.Modify(CType(rcd.ReportDefController.ReportObjectController.GetAllReportObjects().Item(pobj.Name), CrystalDecisions.ReportAppServer.ReportDefModel.Paragraph), pobj)
                  Next
    but I get the following error: Public member 'Name' on type 'ISCRParagraph' not found. I am having trouble finding where the proper paragraphs collection is.
    What am I doing wrong?

  • Renamed menu item not changed when site published.

    I changed the name of my site welcome page back to Welcome (it was "Readings"). But when I publish, "Readings" is still the menu name even though I have used ftp to completely deleted all the published files. So somehow iWeb is keeping the old name. How do I get iWeb to smarten up???

    I'm not using MobileMe. I'm publishing the site to http://members.shaw.ca/tealeafreading/MandasTea_LeafReading/Welcome.html
    I've run through your suggestions, results as follows....!
    Erasing the Safari cache generally does not work: changes are not displayed on the published site.
    Publishing the entire site to a folder produces the correct content.
    Even if I empty the cache and use FTP to delete the server copy of the site ... the changes do not propagate to the server!!!
    What seems to work most often is powering down my Mac.

  • Font not changing in preferences.

    In the mail preferences, fonts and colours tab, im trying to change the message font, i dont like reading lucida grande and i'd much prefer helvetica. However, when i select helvetica (or any other font) it doesn't change, it just stays as lucida grande. So does the mailbox & messge list drop downs. but the Plain text works fine
    help?

    You may want to also search/ask in the Entourage forum:
    http://www.officeformac.com/ProductForums/Entourage/

  • GR based IV indicator not changed with BAPI_PO_CHANGE

    Hi Folks,
    We have a scenario where we need to create a new item in an existing PO.We are using BAPI_PO_CHANGE.
    We should also set the "GR based IV" field as space for the new item.
    But the indicator remains as 'X'.
    I'm passing the following values:
    At header level: PO no, pur org,vendor,com code,doc type,pur grp,curr.
    At item level:item no, material,price,qty,and
    POITEM-GR_BASEDIV = space.
    POITEMX-GR_BASEDIV = 'X'.
    Please inform there is mistake in my input to BAPI .Appreciate and any suggestions to solve the problem.
    Thanks in advance.
    Jay

    Thank you for the response.
    Found that the vendor master has the GR based IV option selected.
    This means that when a PO item is created the GR based IV indicator is set to 'X'. But we can change the same PO item to remove the indicator.
    Thanx again for your suggestions.
    Jay

  • Applet font not changed

    Hello,
    I have an application/applet that displays persian text. The font is bundled in the jar file and this works perfectly well when I run the application, however the applet seems to display a some default persion font (which does not join characters correctly) and not the font bundled in the jar file.
    I wanted to know if it is possible for an applet to use a font that is bundled in its jar file or is the applet constrained to using fonts that are avaibale to the browser only?
    Thanks,
    Hoos

    Fonts are embedded in the PDF part of an AI file. So you can use any AI file with embedded fonts to place into InDesign and to Print from it.
    But when you want to edit the file in Illustrator you have to have the needed fonts installed on your Computer (and of course licenced). Otherwise you will experience what you have described.
    If you don't need to edit the file, place it as it is in InDesign or whatelse program you work with.

  • CS6 menu font size change for QHD screens windows 8.1?

    all menus etc too small to read on laptop with qhd screen (3200 x 1800) Other software is all OK, just CS6 and a few others that cannot adapt. is there a solution?

    Trevor only Photoshop CS6 for Mac OS released an update for HiDPI displays.  You can find additional details at HiDPI and retina display support FAQ.

Maybe you are looking for