Label Flash or light scribe Drive

I have had a Satellite L750 custom for a few months. I have been recently trying to burn a label with the Label Flash feature. The Corel Label@once software that came loaded in the computer doesn't give me the option to burn the label once I have created the label. In researching the CD/DVD drive that was installed in the laptop I saw online that the light scribe burner should have an extra sensor in it to detect the lightscribe disk. I don't see that on my drive. The properties in my DVD burner have it listed as Model #: TSSTcorp CDDVDW SN-208AF My question is: Is this drive capable of burning labels on CDs & DVDs?
Solved!
Go to Solution.

Satellite C655D Detailed Product Specification
1
Model Name
: C655D-S5515 Part Number: PSC0YU-035078 UPC: 022265161951
320GB (5400 RPM) Serial ATA hard disk drive
Fixed Optical Disk Drive
7
DVD SuperMulti drive with Labelflash® supporting 11 formats
o
Maximum speed and compatibility: CD-ROM (24x), CD-R (24x),
CD-RW (24x), DVD-ROM (8x), DVD-R (8x), DVD-R DL (6x),
DVD-RW (6x), DVD+R (8x), DVD+R DL (6x), DVD+RW (8x),
DVD-RAM (5x)
o
Supports Labelflash® media to burn high quality labels directly on
I think that Toshiba is wrong. My question is how will they compensate me for this mistake? Give me a deal on another drive that has Labelflash or Lightscribe?

Similar Messages

Light Scribe, Do we have the option?

I dug into the specs of the typical drive used in the MacPro.
It's the PIONEER DVD-RW DVR-112D
Sadly it's about the lowest level of unit selected.
The main reason I would use the featured light scribe drive
is to etch the song titles on it.
Being the last time I made a couple CD's for the truck, none of the
titles were in the data.
Just the numbered tracks.
I never made another one, if that's what their intent was.
I don't recall ever having the option to have titles or not.
I suppose I need to go to CD burning night school now.

The model you suggested is sold out.
So I decided to do an alternate model that can be used for both the MacPro, and the Powerbook laptop.
In a way, I was hoping as an external drive that I could find them as slot loading.
It would make a cool layout strip console with drives mounted side by side on underside of shelf above the 23" Cinema display that's tucked in within the cabinet.
I'm always afraid the drive tray is going to get bumped.
At least on the MacPro, it times out and closes by itself if it's dark in the room.
http://eshop.macsales.com/item/Other%20World%20Computing/MRFWUSD22XLS/
OWC Mercury Pro FireWire/USB2 Lightscribe Direct Labeling SuperDrive up to 22X DVD, 12X DL DVD, 48X CD Burn Speeds. Includes: Prosoft DataBackup III(OS X) & NovaStor(Win), DragonBurn, 5pcs DVD-R 16X Lightscribe Media, 25pcs DVD-R Media. 1yr OWC Warranty. (OWCMRFWUSD22XLS) $100
Then add http://eshop.macsales.com/item/Roxio/242600/
Roxio Toast 10 Titanium $100
Might as well do it right.
Cheers

Does anyone care for Light Scribe?

Hi Gang
(sorry - this is where this post should be)
I just saw a great value package at OWC for an internal Samsung 20x DVD Light Scribe Drive; (comes with Light Scribe Software and blank discs).
http://eshop.macsales.com/shop/optical-drives/superdrives/powermac/
I currently have a 12x Pioneer 111D
OWC also has a straight up Pioneer 20x DVD Writer Drive (No Light Scribe)
I know the limitations of Light Scribe for printing. But wonder, (for just straight up titles), if it might beat printing to disc with an Epson Stylus 380 printer?
And how bout the speed Light Scribe takes to print a few simple titles on a disc? Problem?
(I've heard it takes forever - compared to the Epson straight to disc?)
Any problem with Media compatibility for a Light Scribe Samsung Burner?
Thanx for your help

I use Light Scribe with my external LaCie DVD device. It's funny... nothing more... nothing less. I can't tell you how long it will take to print a simple title, because I use it for complex designs only. It takes about 30min to print... which is a very long time, guess. I don't use it on my primary computer, but on a spare one... so it dosn't bother me at all during my daily work to wait for it to finish.
My opinion - it is not a "Must Have"... but it's nice to have.

Burning labels onto DVDs and CDs using light scribe discs

I just recently purchased a HP DV 7 quad core 750 GB hard drive with 8 GB of RAM and a blue Ray player. I was wondering if I would be able to use light scribe discs to burn labels onto CDs and DVDs using my blue Ray player since it is also a super multi drive. Or am I mistaken because I came to understand that HP was making that pretty much standard on their laptops and other computers since they are primarily the makers of the light scribe disc. Please help me this is my first HP computer. Thank you!!
This question was solved.
View Solution.

Hi,
Dv7 is a series of dozens models of laptops. What is yours but since light scrib id not very popular now therefore your machine may or may not have it. Again, you need to check the specs of your machine and the quick way to check is its model. Here is how:
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=&docname=c00033108&lc...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Power Adapter flashes orange light and won't power on.

I woke up this morning to find that my power adapter's light is off and it is still plugged into the surge protector.
1. When I push the button on the bottom, I get all 4 lights saying that it is charged.
2. When I plug the laptop with another adapter, I get a constant flashing orange light from the power adapter. Mine will flash orange several times and then go black. It's like it's trying to communicate something to me but I don't understand its language!!
3. I have tried resetting the computer, that didn't work.
4. I have tried powering up without the battery in the machine, that didn't work.
Any ideas out there?? I'm thinking that I need a new logic board but I also haven't backed up my info. Any assistance on either of these issues?

I found out that someone had spilt chicken soup on my laptop and it pretty much destroyed the logic board, optical drive, processor and other technical stuff.
*heavy sigh*

8800 upgrade attempt lost usage and flashing red light. No response.

Thought I'd upgrade from 4.5.011 to 4.5.018, at the suggestion of the desktop manager. Things were okay until it stopped. Fatal error message, flashing red light...nothing else. Attempted again, and again. Gentleman at BB store did the same thing. He thinks it's unrecoverable.
I've tried an overnight battery pull, apploader attempt through C and D drives, Problems with applications and software (exe v axl...) Other ideas?
lrbwiner

John_Clark wrote:
Try this:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
if that doesn't work then try this:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
Then use Loader.exe to reload the OS to your device using the instruction found here:
http://www.blackberryforums.com/general-8800-series-discussion/220178-latest-os-8800-4-5-0-312-4-5-0...
I've tried it 3 times. The program erases the application and then begins loading, which gets about 20% of the way and then stops. Message is communications failure A:0x0000000E. And the red light, which was out while the process was running, comes back on. 2 flashes, stop, 2 repeat.
Point of info. The screen never came on during the erase.
I will keep trying...thanks.
lrbwiner

Ch20l burning light scribe

I have the above drive on my HP 1070 PC, but it does not recognise Light scribe in any program which I have on the PC. The Drive has the Light Scribe symbol on the front, so my question is.
Why cannot any of my software programs use this feature?
How can I get this working?
I don't have Itunes installed, as I have heard others have had this problem with others drive in this series.

In your start menu do you have a Lightscribe folder? Also in Programs and Features you should have Lightscribe System Software listed. If Lightscribe is not listed you can download the software. You can find the Lightscribe Template Labler here also. http://www.lightscribe.com/downloadsection/Windows/index.aspx?id=810
If the software is already installed check HP for updates for your computer. Go to Support & Drivers at the top of this page and select your computer model and operating system. There might be driver updates for your DVD writer available..

Unable to boot Cisco Ironport C160, beeps and flashing amber light

At first RAID staus was showing as degraded. I tried to rebuild the RAID but hat failed. I was able to logon and update to version 8.0 after the RAID rebuild failed.
Now when I try to boot the ironport it beeps twice and keeps on repeating every 10 seconds or so, and there is also a flashing amber light at the back and front of the device.
Suspecting that there was a problem with the hard drives i tried to restore a recent image of the Ironport that I had, hoping that the RAID would rebuild, But that is not the case. The Ironport is still unable to boot and is beeping twice as well as the flashing amber light.
Does anyone know if there is anyhting that I can do to rectify this problem?
Thanks in advance

Amber light usually means hardware issue. You should contact TAC.
It is not clear what you did to rebuild the RAID but you should try nothing before discussing with TAC. Any attempt to do reimage could break the box for good.
At the moment you have access to the box, enable remote access and call TAC.
There is an account, named enablediag which can be used for troubleshooting. It has the option to open remote access so TAC can assist further. The password is the same as your admin account.
I hope this helps.
-Valter

Light scribe quit printing

I have had this desk top with the light scribe burner for about 4 years and had burned light scribe disk before,
But now it will not.
Are there new drivers or something I need to download?
The only thing I have changed in the computer is the hard drive.
Thanks. Luther

http://www.lightscribe.com/products/index.aspx?id=105
The burning software your computer came with should handle it but if not they have an app on the lightscribe site.

Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or my wireless router but nothing. Just a flashing orange light. Help for a simpleton p

Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.

Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
Hmm, ideas anyone?
SBB

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again

I am upgrading wi-fi router from Airport Express to Airport Extreme. I followed set up instructions yet I am still getting the flashing amber light and cannot setup (using manual setup or the continue button). What should I do??

Hello,
I am upgrading my wireless router from an Airport Express to an Airport Extreme. After disconnecting the Express and plugging the Extreme via ethernet cable to the modem, I am receiving a flashing amber light after connecting the power source. I also reset the modem while the Extreme was still powered and plugged into the modem, but no luck. I also tried resetting the modem and the Extreme and still no resolution. Please advise. Thank you!

This error usually occurs when the Windows Firewall and/or anti-virus software blocks the connection attempt from the PC to the AirPort Extreme.
Microsoft Security Essentials can do the same thing.
Things would be much easier if you had a Mac or iPhone or iPad to set up the AirPort Extreme. Otherwise try turning off the Windows Firewall and Anti-Virus programs, etc on the PC.
Restart the PC, then see if the PC can contact the AiPort Extreme. It will likely help to connect an Ethernet cable from the PC to one of the LAN <-> ports on the AirPort Extreme. You can disconnect the Ethernet cable once the AirPort Extreme has been configured.
Re-enable the Windows Firewall, Anti-Virus, etc and restart the PC.

Airport Extreme Flashing Orange Light - No Base Stn ID

Here is a huge problem I hope someone can help solve.
AE working fine for over a year. Hooked up new HD to it, got a requester asking for answers on this device. Clicked something (now I cannot for the life of me remember what).
Now no matter what I do the AE only goes to a flashing orange light, after power off/on, after power on reset, after power off reset, no Base Station ID found on any scan, have powered off/on the DSL modem.
No matter what is tried it always comes back to a flashing orange light and no way of accessing the base station to start over again.
Temporarily on a hard cable to make contact here. No hints in the manual, nothing more I can find on line for troubleshooting this.
How can I access and reset the base station so it is recognized??
This seems rather severe for one requester selection and now nothing!
Thanks in advance
Geoff

Finally some joy on this issue!!
Here is my workaround (or solution).
On the Western Digital HD there was a .pdf buried on it with the real hint. That is the HD comes preformatted in FAT32.
So first I connected it directly to the Mac rather than the Airport Base Station. This allows it to be seen on the desktop AND read by Disk Utility. It also allowed it to be read by Time Machine. However I chose to reformat it in Mac OS Extended (Journaled).
Then the Time Machine initial backup was done through the Mac. When completed I plugged the HD back into the Base Station, went to Finder/Go/Connect To Server using the smb://10.0.1.1 address. Voila, The icon is back on the desktop and readable by Time Machine
I suspect this all could have been done without backing up through the Mac first. Just happened that is the way I did it.
The Key seems to be to reformat the HD to other than FAT32 for the Airport end of things. Seems to me that was the problem I had when I was backing up both PC and Mac to one HD. FAT32 as I recall will not work that way.
So a solution that works. May require the HD on Base Station to be mounted each time you power up. Minor inconvenience once you are going though.
Cheers
Geoff
Note: this answer was posted in another thread just above to make sure it is seen.

I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

sylviafromhanover wrote:
So I assume that the original modem stays installed with the coaxial cable and the Exrtreme is in addition to that.
Yes, that is correct.
Did you have the instructions that came with your Airport Extreme? Are you sure you have it setup properly? Here is the setup guide:
http://manuals.info.apple.com/en/airportextreme_802.11n_userguide.pdf
Ensure you have everything setup properly. Once you do this and if you are still having trouble, follow Star's instructions.

Problem with a Dell Monitor - stopped working yesterday, just a flashing orange light. Monitor or Mac Mini issue?

I've been using an old Dell monitor with my Mac Mini ever since I got it, however yesterday evening my monitor stopped working - however I'm not sure whether the issue is with the monitor or the Mac Mini. It just doesn't seem to respond when I try to bring the Mac Mini out of sleep. I can hear that the Mini is responding to the keyboard - I hear the right noise for pressing return on the password box without entering anything.
I've made sure all the cables are plugged in properly (power & connection to the Mini), but all I'm getting is a flashing orange light on the monitor.
I don't have anything else to test the monitor on, nor do I have access to another monitor to plug into the Mac Mini - I only have an old iBook G4, so don't have the right adaptors to plug the VGA from the monitor into that.
So before I run out and buy a new monitor, what is the best way to determine where the problem lies.

Hi, I've actually never had any issues waking this monitor from sleep, this is the first time that it has been unresponsive and I've had it for years - probably over 10! (E151FP) so probably overdue for replacement.
To be honest I'd rather not just switch the Mini off unless it's a last resort given that other than the lack of a picture everything else seems to be working ok - still hearing all the normal noises of Skype, Mail and TimeMachine etc.

Label Flash or light scribe Drive

Similar Messages

Maybe you are looking for