Label is not printing in 5 th page and item data appering before the morgin
Hi friends,
In script. All pages comming prperly.. but last page the labels are not prining and item data is printing upside the morgin only.. what is the problem?.. All pages its comming properly...except last page..
if soem body knows .. please help me..
I agree with Shiva Kumar - most likely there is no such field in it_afpo. A few more suggestions though:
1) Do not post large pieces of code here - if you have a question about a particular SELECT statement, post only that statement and relevant data definitions. No one is going to read your whole program anyway - we have work to do too.
2) Your JOIN is way too big and would be difficult to analyze if anything goes wrong. You might want to start with smaller SELECTs and, when you're sure everything is working correctly, then combine them into one. Also huge JOINT is not necessarily more efficient.
3) You don't have to use aliases "AS a... AS b", etc. Instead, just use the table name, e.g. AFKO... AFPO... .It is much easier to read this way. The aliases are needed only if you're joining the same table more than once. Also they're not limited to one letter either.
Similar Messages
-
Why do my thumbnails not all load on a page like they used to before the last Firefox update?
I used to love firefox and used it exclusively as my web browser. But ever since the last update to version 3.6.15 the thumbnails on the websites I ALWAYS visit no longer all load!
Some of the thumbnails load and some don't. If I close firefox and go back to the same page I may get some of the thumbnails to load that didn't before but others that DID load before don't this time.
This same problem happens at other sites as well.
So, I gave up using firefox and switched back to IE because it works properly at least though I don't like it as much as firefox.
I wish they hadn't tried to fix something that wasn't broken because now it is broken!See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]] -
I want to print just the time at the bottom of my printed page
what format do I input into Page Setup>Custom box
What ever I input it is shown in the actual format that I have input
i.e date is shown as date not 28/06/2010
== This happened ==
Every time Firefox openedI do not know much on this subject. But check Window to see if
all the languages you need are listed. Then check your other
programs that, like Firefox, have their own language files. -
K5400 will not print more than one page at a time.
The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.
Using a Windows XP SP3 computer.
Thank you, MarionHi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us. -
P1006 - networked with XP and VIsta-64 not printing more than 2 pages
Hello - I have a dilemma with my HP P1006. I have the printer directly plugged in (USB) with my XP (32bit) PC. I have a Vista-64 PC networked with it. Both (XP-32 and Vista-64) are plugged in directly to the router (not wireless). My question is why can I not print more than two pages at a time with items opened on the Vista-64 PC? I CAN print more than two pages with items opened in the XP-32.
Things I've done:
1 - uninstalled everything & reinstalled the latest drivers for the XP-32.
2 - marked the printer as "sharing" on the XP-32.
3 - confirmed the printer is marked "enable bidirectional sharing" under the printer properties on the XP-32 PC.
Things I perplexed about:
1 - why won't items (docs, webpages, etc.) print more than two pages at a time from the Vista-64 PC?
2 - is there any reason that I should download a driver for the Vista-64 OS? If so, which PC do I download it to?
3 - I have another printer (Lexmark inkjet) connected in the same way (except it is a serial port not USB) and it can print more than two pages of a document at one time with no problem from either the XP-32 or Vista-64 PC? Why?
Any thoughts on this situation? Any suggestions are greatly appreciate.
Thank you - Jane.Hi!
I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
Thanks -
Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7
Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7.
I contacted Microsoft representatives said the problem is the Acrobat Reader once all other applications print without problems.
Please help me!We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.
-
I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot. I know it must be something system wide as it happens in apps other than Pages.
I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens. It is so frustrating! I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot. I know it must be something system wide as it happens in apps other than Pages.
-
FF4 will not load my MSN home page AND there is NO FIX.
FF4 will not load my MSN home page and there is no fix.
You'll have to start from the command line see [http://kb.mozillazine.org/Command_line_arguments http://kb.mozillazine.org/Command_line_arguments]
firefox.exe "about:blank: -
It is very difficult to navigate on facebook via safari. The IPAD does not allow other browsers to download and use it almost prevents the facebook app and the lack of scrolling the page.
I also have problems with Facebook on my iPad 2. I don't do a lot with Facebook and generally only post on my feed page. Sometimes hitting return on the keyboard enters the comment, sometimes not. Sometimes the comment will show on my iPad but if I revisit that page I find that the comment has disappeared. So I'd say that Facebook and my iPad are not totally compatible with each other.
I looked into Friendly and was about to purchase this free ap. But before I did I went to the Friendly web page for more info. There I found a page with users comments. One after another users complained about bugs with Friendly. The developers claimed a fix was coming but the user comments complained about the lack of response and support. One of the fixes suggested by the developers was to log out of Friendly then log back in. One user complained that doing this three times in ten minutes was not very helpful. Because of this I decided to avoid Friendly.
I did find a Facebook developed ap but it was for the iPhone. I presume that iPhone aps will work on the iPad but I'll wait until Facebook releases an iPad compatible ap. If there is an ap developed by Facebook for the iPad that I missed please let me know. -
I bought a brand new ipad air, but I am not allowed to download ie. pages and keynotes for free, as promised?
The free only counts for devices activated after September. So first you need to activate the iPad (go through all the set up stuff), then, using the same Apple ID you used to activate the iPad, go to the App store and search for Pages, etc. When you download them you should see them for free.
Being free is tied to the Apple ID used to activate a device. For example, I bought my iPod in June, so I'd need to pay for the apps, which is why they're not universally free in the app store.
After you activate the iPad it may take a little time for the app store to realize 'yeah, just got a new device, this purchase is free'. I've seen people say they go right in, see it for cost, then go back in a little bit and the apps are now free. -
Adobe reader has buttons next page and previous page, why not also top of current page and bottom of
Adobe reader has buttons "next page" and "previous page",
why not alson "bottom of current page" and "top of current page" ,
these would be very useful if the page is increase to the maximum left and rightThis is a user forum; if you have any product enhancement requests, do it here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
-
I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doent's offer me another update! How can I update it? Or I can't?
ayrosa wrote:
I still have an iPad 1, and need to update to iOS 7
Sorry... This is not possible. The iPad 1 can Only go as far as iOS 5.1.1 -
I'm trying to run a .jsp page and all I get is the following error. Thoughts?
Running Coldfusion 8 / JRun 4 updater 7 / Coldfusion 8 hotfix
2.
I'm trying to run a .jsp page and all I get is the following
error. Thoughts?
Could not invoke Java compiler, please make sure jikesw is in
I:\JRun4/bin or put a JDK bin directory in your path.
jrunx.compiler.JavaCompiler$NoCompilerFoundException: Could
not invoke Java compiler, please make sure jikesw is in
I:\JRun4/bin or put a JDK bin directory in your path.
at
jrunx.compiler.JavaCompiler.outProcessCompile(JavaCompiler.java:474)
at
jrunx.compiler.JavaCompiler.compile(JavaCompiler.java:132)
at
jrunx.compiler.JavaCompiler.compile(JavaCompiler.java:100)
at jrun.jsp.Translator.compilePage(Translator.java:176)
at jrun.jsp.Translator.translate(Translator.java:254)
at jrun.jsp.Translator.translate(Translator.java:101)
at jrun.jsp.JSPEngine.translateJSP(JSPEngine.java:707)
at jrun.jsp.JSPServlet.translate(JSPServlet.java:125)
at jrun.jsp.JSPServlet.service(JSPServlet.java:113)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)You're right, that ws another fix I tried. There is no fix fo
rthe issue described, but it still seems like an old issue. My
class paths are short. Here is my jvm.config (pretty standard):
# VM configuration
# Where to find JVM, if {java.home}/jre exists then that JVM
is used
# if not then it must be the path to the JRE itself
java.home=I:/JRun4/jre
# If no java.home is specified a VM is located by looking in
these places in this
# order:
# 1) bin directory for java.dll (windows) or
lib/<ARCH>/libjava.so (unix)
# 2) ../jre
# 3) registry (windows only)
# 4) JAVA_HOME env var plus jre (ie $JAVA_HOME/jre)
# Arguments to VM
java.args=-server -Xmx1000m -Dsun.io.useCanonCaches=false
-XX:MaxPermSize=256m -XX:+UseParallelGC
-Dcoldfusion.rootDir={application.home}/
# commas will be converted to platform specific separator and
the result will be passed
# as -Djava.ext.dirs= to the VM
java.ext.dirs={jre.home}/lib/ext
# where to find shared libraries
java.library.path={application.home}/lib,{application.home}/servers/cfusion/cfusion-ear/cf usion-war/WEB-INF/cfusion/lib,{application.home}/servers/cfusion/cfusion-ear/cfusion-war/W EB-INF/cfusion/jintegra/bin,{application.home}/servers/cfusion/cfusion-ear/cfusion-war/WEB -INF/cfusion/jintegra/bin/international
system.path.first=false
# set the current working directory - useful for Windows to
control
# the default search path used when loading DLLs since it
comes
# before system directory, windows directory and PATH
java.user.dir={application.home}/../lib
# JVM classpath
java.class.path={application.home}/servers/lib,{application.home}/lib -
U201CValid Tou201D date set before the date that the report is run u2013 print u201Cnullu201D.
Hi Experts
I had a requirement for the Query, when we executing the through slection screen we will be giving 0fiscyear "from and to" dates. the "Valid to" (0date) has to check the relation of the Client partner and contract of relationship, if it is within the current date it should dipslay the report with values , if it is out of current date, it should display in the report as "null".
Logic : This report is based on the u201CClient Partneru201D and the u201CContact ofu201D relationship. If any of these relationships have a u201CValid Tou201D
date set before the date that the report is run u2013 print u201Cnullu201D.
Could anyone of you provide the inputs on this.
Thanks in advance
Thanks
Sekhar.PIvanLevo wrote:
Could not find the /Library/Startup Items.
Good, it shouldn't be there.
For your Dock problem,
Go to your Finder "Go" menu choose "Go to Folder" and enter ~/Library/Preferences. Then delete these files then restart or log out and back in.
com.apple.Finder.plist
com.apple.dock.plist
com.apple.dock.db
com.apple.dock.extra.plist
Let us know -
I am downloading the premiere elements 12 file on the adobe page and my error message says the file archive is missing??
you need the 7z file in addition to the exe
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
Maybe you are looking for
-
How can I create a hashmap() with multiple values for the same key?
I am trying to write an application that will us something like a Map() with multiple values but some have the same key. Is this possible?
-
How to hide parameters showing up in browser when using jsp?
I am a jsp newbie. I have a simple form like this: <form type=post action="http://localhost:8080/MyTestServer/TestCodes.jsp"> <table> <tr> <td>Your name <INPUT type=text name="YourName" value="Your Name"></td> <td>Your ID <INPUT type="password" name=
-
Hi all, Was wondering if there is a Java Perf Lib for Solman 4.0 running on Windows 2003 Std Edition with MS SQL 2000 Enterprise Edition? I need it to increase the performance of the Java Can someone also tell me what is the recommended specs require
-
Hi All, I am new to this Oracle Apex. We are using Oracle Application Express Release 4.0 I have a query. Here When validate item trigger wont fire.So how to over come this problem Ex: Say i have 4 text fields, i button Based on the value in first fi
-
I'm working on a setup that when the menu hits its end (music) that it playes the next video, and that video goes to a version of the main menu where the next item is highlighted, and at the end of that version of the menu it goes to play the next vi