Label object did not show the changed text.

hi,
I 've made change to the text on the label object on the form. Save it and Preview the form. However the form shows the old text of the label. But the text is changed in the design mode.
I close the form and re-open again. the problem is still same.
Does anyone come across this issue ?
Thanks,

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

Similar Messages

APERTURE: Small preview images do not show the changes.

excuse my lousy english...
Problem with Aperture:
Small preview images do not show the changes.
I use Aperture 3 since August 2010. By November and 10 projects later it ran normally.
Since the project 11 are in the preview images shown (on the bottom bar in the shared representation) and in the pictures in the books no adjustments. I change for example a picture in b / w it remains in the small preview images bunt even though the great View Erbild s / w is. Even in the books then the famous picture colorful and even grobpixelig.
This is of course in the processing of multiple images per project huntert pretty annoying to have no overview of processed images ...:-(
I had a third installed for books and not as close a relationship.
Does anyone have similar experience or know someone how can I fix this?
Thanks for reading!
Lokoe

Lokoe,
To make sure we understand:
I change for example a picture in b / w it remains in the small preview images bunt even though the *great View Erbild s / w is*.
I am not sure what "s/w" is, but I think you mean:
"I change picture to black and white and the small preview images remain *in color* even though the *big picture in the Viewer* is in B/W."
Even in the books then the famous picture colorful and even grobpixelig.
"In the books the selected picture is colorful and even ???"
"Grobpixelig" -> "grosspixelig" -> "Looks like big pixels???" Not quite sure of the translation. It's been 15 years since I spoke Deutsch!
nathan

I don't see any web site when I connect to firefox but I can't uninstall the program because it says that I must close firefox first. I can't do that because it did not show the page.

I just upgraded to firefox 6 and it did not include the add ons. It said that the add ons were out of date. When I try to open yahoo.com I don't have any site to see. I can open chrome browser and IE without any problem. Before this new problem I was having a problem with firefox taking a long time to open. I have no problem with the other browsers.

See:
* https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it

Why is Adobe Bridge not showing the changes I had done on Camera Raw?

Dear all, I am trying out Adobe Bridge and discovered that after editing in Camera Raw (ACR), the changes was not shown on the thumbnail.
I am using photo (1), which is the top left corner photo, as my main and tried to apply changes to the remaining 5 photos.
I randomly changed the temperature to the mix and click "done".
You can see that (1) thumbnail did not change after my changes in ACR. Nevetheless, I then apply previous conversion to the remaining photos.
Neither (1) nor other photos have changes on the thumbnail.
Please note that when I check all the photos, inside ACR, I can see the changes (in temperature).
How may I make the thumbnail change show in Bridge after I edited in ACR? The purpose is that I hope that from the look (without clicking), I know there is changes (e.g changes in temperature).
[Note: I do not own the photo(s)]
Thank you for your help.

Hi station_two, thank you for the very quick respond. I had found out the problem is my setting as followings:
My solution is as followings (after Develop setting> Previous conversion):
Once again, thank you very much.

Web Template is not showing the changes done

Dear Experts,
I have done few changes in my web template like navigation pane has been added and the filter pane is removed from the template but still its showing the same filter pane, no error is being reported and for this i have closed the web application designer and again opened it but still no change what could be the issue.
thanks and regards
Neel

Hi Neel,
Is there any error message(s) while closing / re-opening the template?
I am not sure about the configurations on your systems. In our environment, calling a template requires a connection to EP. While BI is having a communication problem with EP server, changes we made on template is not reflected.
Hope this help!
Heng Meng

I had recently tried to change the background of the lockscreen and it did not show the selected image as lockscreen background while charging, but earlier the image iused to keep as lockscreen background used to be always present even while charging???

is it normal for the iphone to act like this ???

Firstly I thank you very much ckuan to take out time and answer my question. But I seem to have tried all the three things but in my case the phone doesn't show background of lock screen in two out of three instances that you have pointed out. First being it shown to me while charging if I press the home key, but if I press home key once during charging it still appears dark and battery and I suppose date and time shown.
Secondly the one at silent mode also doesn't work in my phone.

Published to folder iWeb site always using Times New Roman for every piece of text in published site and not showing the original text style used when building the site in iWeb.

Dear All
Hello from rainy, windy and cold North East England! I need to ask for your help as I'm new to iMac and new to iWeb and it's frustrating the life out of me!
I'm just beginning to build a website for my business. Previously, I used Frontpage, but it's been that long since I used it - I've forgotten half of it and so, I'm using iWeb instead as it's silly to use an iMac for business but a PC laptop for the website design.
I've got the background image I want on the homepage (beautiful image of a rain forest - even if I do say so myself!) and I'm trying to enter a text box at the lower half of the screen, in the centre of the page saying 'click to enter'. I type in the text, I edit it so as to change it to the font style of my company (Gill sans MT) and then I publish the site to a folder so that I can see what it would look like when viewed via the internet. When I do this - the font changes size to a bog standard size of 'so small you need a magnifying glass to read it', it changes colour from black to purple (which looks disgusting) and it changes font style from Gill Sans MT to Times New Roman.
It doesn't matter if I delete the entire site and start again or delete the text box, and insert a new one. I've googled this subject until I'm blue in the face and I can't find an answer - can anyone suggest anything that will help?
Many thanks for your help,
Best wishes,
Sean.

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
NOTE: If you don't use Web Safe Fonts any computer that does not have that font installed will substitute another font for it and change the look and feel of the web page.
So it's safest to use one of those web safe fonts.
OT

Starting with version 32.0 of Firefox, 1Password text boxes do not show the typed text.

The 1Password plugin for Firefox prompts users to enter new passwords as they are created. Starting with version 32, however, the text box still appears, but no cursor appears in the text box, and no type is visible as I type. The typed entry is posted to 1Password, but it must be checked to ensure that there were no typos (since the type was not visible as it was entered). Is there a fix for this "invisible type" problem?

I appreciate your response, but 1Password has no new release that might solve the problem -- a problem, to be honest, that I don't think is theirs.
Firefox has become increasingly prone to rendering errors, and this may be just another one. Sites that display properly in Safari and Chrome are a mess in Firefox, and every day brings me closer to switching to another browser.
Whether there's code specific to Firefox that developers, because of Firefox's declining popularity, aren't including or Firefox isn't incorporating the latest standards, I don't know. But I do know that I now need to open other browsers throughout the day because Firefox is no longer the reliable resource it once was.

Crop in Develop is not showing the change

In the past, I have been changing my default image size to a 2:3 format by selecting it from the drop down list while in the Develop module or by pressing R. After adjusting the image, it used to display 2:3 under the lock, but now it is going back to AS SHOT.
I am using a Windows 7 machine with LR 4.2.
I like knowing I have a custom crop ratio, but have no idea if it is being applied by looking at images in LR.
Any suggestions would be appreciated.
M. Jackson

Hi again,
An uncropped image from my D4 is 3280 x 4928 pixels. 2/3 of 4928 is actually 3285.333333333333. Or, if using the smaller side to set the ratio, 2:3 image would be 3280 x 4920. I doubt many printers would notice 5-8 pixels, but computers can definitely keep track of them. Like I was mentioning in the OP, earlier versions of LR reflected the 2:3 change if I clicked on it, cropping 8 pixels off the sides (4 pixels each side).
I am adding a screen grab from an earlier edit in an earlier version of LR. You can see the notation in this image indicating a 2x3 aspect crop. If I do the same thing now (in LR 4.2), it will show As Shot instead of 2x3 /4x6.

My Ipod Touch did not show the charging icon when it is in off position

Hello,
It is my new one I just got it on Sunday. I wonder if this device is something wrong? It seems not charge when I shut if off. Need advise about this problem.
However it charges when I turn it on,obviously it shows charging icon on the screen.

There is no reason to turn it off - ie. hold the Sleep/Wake button until you see the red slider and turn it off type of off. Sleep works just fine and, it will charge and/or sync when in sleep mode.

HT202027 Why some pre-oder movie did not show the release time?

Such as fifth shade of gery

The dates will only be shown if the studio/rights-holder has already decided upon their release date - assuming that you mean Fifty Shades of Grey then that has only just been released into cinemas, it's possible that the rights-holder haven't yet decided when they put into the iTunes store.

ABAP Query - Not showing the required changes through Z T.Code

Hi,
I have a ABAP Query for OPEN DELIVERY QUANTITY (T.Code - ZABC). I change something in QUERY and activate. After that i execute it, and saw required changes.
But when i execute it with the T.Code - ZABC, it does not show the changes. Even i Save and Test with the SQ01 t.code.
Please tell me, what is the problem in it. Why not showing the required changes through T.Code - ZABC.
Regards...

HI,
Dear, it seems that you have changed the query in SQ02 and then just save it and not generated.
or may be after generation again clicked on SAVE button.
So untill unless you will not generate the query, it won't work.
Secondly, by chanegs in the query, i don't think it changes the name of the main program.
Regds,
Anil

The JPanel did not show when the menu is selected

My program consists a JMenu bar with sub menu items. When the user select on the menu items a panel with the gridbag layout will show with all the labels.but the panel did not show. Can anyone show the problem for me ?
AdminFrameMain.java
public class AdminFrameMain
     private DisplayMenuBar menubar;
     private DisplayToolBar toolbar;
     private DisplayStatusBar statusbar;
     public AdminFrameMain()
          JFrame frame = new JFrame("S-League Administration Management System");
          Toolkit kit = frame.getToolkit();
          Dimension windowsize =kit.getScreenSize();
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          Container content = frame.getContentPane();
          content.setLayout(new BorderLayout());
          menubar = new DisplayMenuBar(frame,content);
          toolbar = new DisplayToolBar(content);
          statusbar = new DisplayStatusBar(content);
          frame.setSize(800,600);
          frame.setVisible(true);
     public static void main(String [] args){
          AdminFrameMain tm = new AdminFrameMain();
DisplayMenuBar.java
public class DisplayMenuBar
     private JMenu addMenu,addTeamMenu;
     private JMenuBar bar = new JMenuBar();
     private JToolBar toolbar = new JToolBar();
     private JMenuItem addTeamItem;
     private JFrame setFrame;
     private Container setContent;
     private AddTeamManagement addTeamMang;
     public DisplayMenuBar(JFrame frame,Container c)
          setFrame = frame;
          setContent = c;
          SetMenuBar();
     public void SetMenuBar()
     setFrame.setJMenuBar(bar);
     addMenu = new JMenu("Add");
     //file menu items list
     //Add sub menu
     addTeamMenu = new JMenu("Team Management");
     addMenu.add(addTeamMenu);
     //Add sub menu items
     addTeamMenu.add(addTeamItem = new JMenuItem("Add Team"));
     addTeamMenu.setMnemonic('T');
     addTeamItem.setMnemonic('T');
     //team items listener
     //addTeamItem.addActionListener(taskcommand);
     addTeamItem.addActionListener(new ActionListener()
          public void actionPerformed(ActionEvent e)
               AddTeamManagement addTeamMang = new AddTeamManagement(setFrame,setContent);
     bar.add(addMenu);
AddTeamManagement.java
public class AddTeamManagement
     private JPanel addTeamPanel;
     private JFrame frame;
     private JButton createTeamBt,resetTeamBt;
     private Container addTeamContent;
     private JTextArea teamDescTextArea,teamIndpTextArea;
     private JTextField teamNameField;
     private JLabel teamID,teamDesc,teamInfo,numOfPlayers,teamZone,playersNum;
     private GridBagLayout gridBag;
     private GridBagConstraints constraints;
     public AddTeamManagement(JFrame f,Container c)
          System.out.println("add team mg");
          addTeamPanel = new JPanel();
          frame = f;
          addTeamContent = c;
          gridBag = new GridBagLayout();
          addTeamPanel.setLayout(gridBag);
          addTeamPanel.setBackground(Color.pink);
          constraints = new GridBagConstraints();
          teamID = new JLabel("Team ID:");
          teamDesc = new JLabel("Team Description:");
          teamInfo = new JLabel("Team Info:");
          numOfPlayers = new JLabel("No Of Players:");
          playersNum = new JLabel("15 Maximun");
          teamZone = new JLabel("Team Zone:");
          constraints.fill = constraints.VERTICAL;
          constraints.weightx = 1;
          constraints.weighty = 0;
          addComponent(teamID,0,0,1,1);
          constraints.fill = constraints.VERTICAL;
          constraints.weightx = 1;
          constraints.weighty = 0;
          addComponent(teamDesc,1,0,1,1);
          constraints.fill = constraints.VERTICAL;
          constraints.weightx = 1;
          constraints.weighty = 0;
          addComponent(teamInfo,2,0,1,1);
          constraints.fill = constraints.VERTICAL;
          constraints.weightx = 1;
          constraints.weighty = 0;
          addComponent(numOfPlayers,3,0,1,1);
          constraints.fill = constraints.VERTICAL;
          constraints.weightx = 1;
          constraints.weighty = 0;
          addComponent(teamZone,4,0,1,1);
          System.out.println("showing");
          addTeamContent.add(addTeamPanel,BorderLayout.CENTER);
     public void addComponent(Component component,int row,int column,int width,int height)
          System.out.println("adding c");
          constraints.gridx = column;
          constraints.gridy = row;
          constraints.gridwidth = width;
          constraints.gridheight = height;
          gridBag.setConstraints(component,constraints);
          addTeamPanel.add(component);
          addTeamPanel.setVisible(true);
}

Hello,
you are missing only one link, just add following line to your actionPerformed method of DisplayMenuBar class and all problem will be solved
setContent.validate();
Actually, Swing component does not updated automatically. when you do any changes to the component layout it will set that component as invalidated component. To update the view you need to call validate() method defined in JComponent class.
Virus

Error /dev/disk/by-label/ARCH-2015 did not show up

Hello,
I downloaded, checked and burned my install cd.
I booted it and choose the x86_64 After a few seconds I see this message:
Waiting 30 second for device /dev/disk/by_label/ARCH-201505
Error : /dev/disk/by_label/ARCH-201505 did not show up after 30 seconds.
Roelof

Hello, my first post, installed Arch just a few days ago I love it already, it's everything i was looking for!
Anyway, OP your problem appeared to me too and I could not start the installation. However I am proud to say I found a solution
The usb stick is labeled wrong and should be changed to whatever the error says (for me it was 'ARCH_201505').
At least I believe so. I cd'ed to the specified folder ( /dev/disk/by_label/ ) and soft linked like so "ln -s ARCH_201505 ../../sdx1" which was my usb.
Then exit and the installation should commence without any problems. Hope I helped
Last edited by takispan (2015-05-18 21:17:54)

Error: A 'with' action failed because the specified object did not exist.

The weird thing is when i play the file on my computer it
gives me the little error but shows up, but when its live on the
internet it says its not working and doesnt show up. Can anyone
help me with this error?
Level #0: Frame=20
Movie Clip: Frame=1 Target="_level0.instance2"
Movie Clip: Frame=1 Target="_level0.mc_0"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_1"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_2"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_3"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_4"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_5"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_6"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_7"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_8"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_9"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_10"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_11"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_12"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_13"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_14"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_15"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_16"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_17"
Shape:
Movie Clip: Frame=1 Target="_level0.ctrl_mc"
Movie Clip: Frame=1 Target="_level0.instance1"
Movie Clip: Frame=1 Target="_level0._root.prev_photo"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_current_photo"
Shape:
Movie Clip: Frame=0 Target="_level0.mask_mc"
Movie Clip: Frame=1 Target="_level0.mask_mc.mask_clip_mc"
Movie Clip: Frame=0
Target="_level0.mask_mc.mask_clip_mc.mask2_mc"
Movie Clip: Frame=1 Target="_level0.soundControl"
Movie Clip: Frame=1 Target="_level0.soundControl.instance8"
Shape:
Movie Clip: Frame=0 Target="_level0.mask_whole_mc"
Movie Clip: Frame=1 Target="_level0.control"
Movie Clip: Frame=8 Target="_level0.control.myLoader"
Shape:
Movie Clip: Frame=1
Target="_level0.control.myLoader.instance9"
Edit Text:
Target="_level0.control.myLoader.instance9.instance10798" Variable=
Visible=true Text = loading."
Movie Clip: Frame=1 Target="_level0.tishi"
Shape:
Edit Text: Target="_level0.tishi.instance5" Variable=
Visible=true Text = CONTROL PANEL"
Movie Clip: Frame=1 Target="_level0.mc_mouse"
Shape:
Movie Clip: Frame=2 Target="_level0.mc"
Movie Clip: Frame=1 Target="_level0.mc.booor"
Shape:
Button: Target="_level0.mc.booor.next"
Shape:
Shape:
Button: Target="_level0.mc.booor.prev"
Shape:
Shape:
Movie Clip: Frame=1 Target="_level0.mc.booor.autoplay"
Button: Target="_level0.mc.booor.autoplay.instance6"
Shape:
Shape:
Edit Text:
Target="_level0.mc.booor.autoplay.instance6.instance7" Variable=
Visible=true Text = PAUSE"
Text:
Edit Text: Target="_level0.mc.booor.photo_title" Variable=
Visible=true Text = exterior18"
Error: A 'with' action failed because the specified object
did not exist.
Error: A 'with' action failed because the specified object
did not exist.
Error: A 'with' action failed because the specified object
did not exist.

show your code with the trace() function that indicates the
object is defined (along with the output panel's result).

Label object did not show the changed text.

Similar Messages

Maybe you are looking for