Label Printing Problem, Laserjet Professional p1566

I have this problem and it's getting me crazy.
I just bought a Laserjet Professional p1566 and I'am trying to print a Tico label (LP4W-3714, 5 collomns, 20 rows) for tubes in the lab. The problem is that when I print, the printer loses the exact position of the labels, i.e. in the vertical view, for the first rw it starts almost in the correct position, then for the last row it finishes in the 19th row instead of 20th. It means that it prints the whole page a little smaller than the actual size, so it prints everywhere, on the labels and in between as well. On horizontal aspect I have the same problem somehow. Before I had a Laserjet 1010 and it had the same problem of the vertical positioning, but not the horizontal.
Any help would be appreciated

Upgrade to CR XI R2 for free and test again

Similar Messages

Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message Can't install the software because it is not currently available from the Software Update server.

Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message Can't install the software because it is not currently available from the Software Update server. Please help.

Installing an HP network printer

Label printing problem from Business Object Infoview

Hi,
I got a problem with printing label (roll) from Zebera Label Printer. The label is designed in CR XI which works properly printing from Crystal Report XI and Zebera printer prints labels (more then one labels) without any trouble.
But the same label (report) does not get printed with all its pages (labels) from the same Zebera Label Printer using BO infoview. It prints only one page (1st label) and stops.
It seems that BO infoview takes all the labels converted in pdf as one page. Where I want that each label should be considered as single page.
Any idea?

Thanks Don
Yes the same report is published in the BOE.
From infoview, It prints on the screen eight (8) labels in two column on one A4 size page. While I want to have each label (W=3.9in x H 2.1in) as one page printed. So that, each label can be printed as one page on label printer.
I want to print as pdf format then printing on Label Printer.
Thanks
GJ
Edited by: GuroJee on Apr 28, 2010 1:36 AM

InDesign printing problem/laserjet printer or InDesign the issue?

I have a 30-page InDesign file with text and photos. Some pages print fine (I'm printing on 11x17 and 12x18 paper) and others cause my high-end printer (HP Laserjet 8550n) to spit out an endless stream of 8.5 x 11 pages with lines of gibberish courier text (some might be code, some words). I have to cancel the job on the printer and restart it whenever this happens. Sometimes if I delete a photo and re-Place it, or redo some type graphic the problem goes away. I can tell when a page is going to have this problem when the name of the file doesn't disappear from the list on my printer status window at the moment the printer starts to print. If I turn the layout into a pdf there's no problem printing it.
I sent one particularly stubborn problem page (after re-placing the photo and some text) to the company printing the job. They easily printed the page on their humble little laserjet printer.
I'm using InDesign CS4 on a 2008 iMac running OS 10.5.8. Does this seem like the problem is with my printer or with InDesign?
Thanks!

This is so odd. On this particular problem page, a couple of days ago I replaced the image 3 times and it still gave me a printer error. I copied the page from the 30-page doc onto a new, single page and still had the problem. I deleted the image and still had the problem. There are three text boxes and I deleted them one at a time and each time, all the way down to one text box, I was still having the problem. Tonight I go back to the original 30-page doc., replace the image, and the page printed out fine. Frustrating!

Intermec PX4I Label Printing Problem

Hi,
We are facing issue while printing Bar Code Labels on Intermec PX4I label printer. While printing few labels could not print. When I tried to process the failed spool requests with the same settings again, the printer printed labels without any problem. After that the user was able to print the labels normally bust faces the smilar issue randomly. The user has to restart the printer to start the printer. We are facing similar issues on the other lable intermac lable printer as well.
When i checked the error log, I could see the below error:
SAP spool error log
      =====================
Print request processing log
Character converter active when first problem occurred
Data was saved with character set 4102
Data will be converted to character set 1117 (synt = 1117)
Errors occurred processing this print request
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
Most important attributes of spool request
Request number 56457
Request name LVS1   AKN
Client 100
Owner AKN
Request attributes
Time created   2010072522521300
Remaining life +00007215825
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     D
Dispo 3 (Indirect/Direct) D
Default output device AUTZ
Default no. copies 1
Format DINA3
Main print request characteristics
Spool request number 56457
Print request number 2
Print request attributes
Time created   2010072600534800
Output device AUTZ
Format DINA3
Character converter active when first problem occurred
No information available
Any suggestions to solve this problem?

Hello Abhijeet
As you rightly pointed out, inspite of the above error label printing is not impacted.
The problem is that print control SC400 is not maintained in transaction SPAD.
Please refer to OSS note 17559 for more information.
Regards
Chokkalingam Pillai

Label Printing Problems

Just tried to print out one label from an already used label sheet (5159) via Pages and found it can't. Huh? Word can.
New Pages User.

What? Pages can't? That's not a good thing. Why doesn't Pages have a Label Printing facility? It's not rocket science.

CP1025NW label printing problem

Win XP SP3 32-bit. After page prints, the lower 4 rows of label text looks fuzzy and smears if rubbed with my thumb. Latest firmware (2011-08-26), latest driver (2.0.20110727) and selected "labels" as print media before printing. Why is this printer doing this? My old HP LJ 1012 printed the same labels just fine.

Dear Gajanan
please check SAP Marketplace. I belive your WWI version is quite old. IN the OSS number related to WWI you will find additional links to other OSS dealing with label printing on Zebra and other printers. A list of supported printesr is provided as well(if i remember correct).
Check e.g.
OSS notes in Global Label management
C.B.

Label Printing Problem

Hi
I created a smartform( Travel Card in PP).
the label is showing in Print Preview as   1
                                                           2
                                                           3
but the printouts are coming as 3
                                               2
                                               1 am using Zebra printer for this label
Please solve my problem its urgent
Thnaks in advance

Hi ,
sort the internal table before supplying to the smartforms .
Regards

C4280 label printing problem

I have an all-in-one c4280 printer. I am trying to print labels....when I print on regular paper they are perfectly aligned. When I print on labels....it prints too high and they are all off. I have tried to select specialty paper from the printer menu..any other suggestions?

Did you find a solution to this problem? If not, I am contemplating sending HP an invoice for all of my label paper they are ruining.
HP...can you provide any direction?

Production Order Confirm/Label Printing problems

I am currently having issues printing out labels for production orders. Whenever I confirm an order, our printer will print out a different quantity or no label at all.
Here is a brief history of production order confirmations today....
Entered                Printed
80                           40 (2 labels of 20)
20                           No Print
20                           No Print
40                           No Print
ALL confirmations were accepted by SAP
SAP WILL often drag during a normal confirmation when correct labels are printed
SAP will NOT drag when a confirmation is entered and no labels are printed
Yesterday I had a confirmation for 10 print out a label for 19. All of the quantities in SAP are correct, it's only the printer that is creating labels for different quantities. If all the lot sizes in SAP are correct, what do you think the issue might be?

Hi,
Based on what i understand of your query, would suggest to work with your technical person to have a look at the print program. The delay you notice or the incorrect data being printed might have to do with the program.
Regards,
Vivek

Sapscript label prints - problem with high print quantity

Hello,
we are printing labels out of deliveries using sapscript.
To allow print copies, I have set the DIALOG to 'X' on the function call for OPEN_FORM (see below).
We usually print 1 copy for each label. It is working fine for low quantities like for example we print out five labels with a copy for each label.
But for higher quantities, for example 25 labels with a copy for each label, it is still printing out all labels, but on the copy labels, certain information are just missing. Strange thing is, the missing information all have different source tables or text fields. For example the date of the delivery is not showing up, then our part number or the shop order number entered as text field on item level of the delivery.
Is there any setting that could cause this issue? Any other suggestions?
Thanks
Anne
CALL FUNCTION 'OPEN_FORM'
   EXPORTING
      FORM           = TNAPR-FONAM
     LANGUAGE       = NAST-SPRAS
      OPTIONS        = ITCPO
      ARCHIVE_INDEX = TOA_DARA
      ARCHIVE_PARAMS = ARC_PARAMS
     DEVICE         = XDEVICE
DIALOG         = 'X'*
   EXCEPTIONS
      OTHERS         = 1.
Edited by: Anne on Mar 12, 2010 3:39 PM

Probably a bug in your code, we can't help. Only option is to debug!

Address Label Printing Problem

How can I create address labels for printing using Palm Desktop by Access Version 6.2.2?
I recently changed to Palm Desktop by Access Version 6.2.2 and can no longer print mailing labels as I could using an older Palm Desktop version (4.1.? I believe). I previously used Solution ID: 33579, Printing address labels from your Palm device's Contacts (mail merge), but now when I right-click on a highlighted list of records in Desktop 6.2.2, the option "Send to..." does not appear, so I cannot proceed to an Excel spreadsheet as I previously did.
Post relates to: Treo 650 (Verizon)

This is another of several features that Access decided wasn't necessary in Palm Desktop 6.2.2....
Why did you change to 6.2.2? It was designed for Vista users.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Print problem with Yahoo email

Ever since upgrading to Safari Version 7.0.1 (9537.73.11), I have had several different problems with printing emails. For the time being, let me ask here about only my AT&T Yahoo mail.
Here is the description of the problem in Yahoo. When I pull down the “Actions” menu to “Print Message,” I get this dialog box:
Print Error
There was a problem printing, most likely caused by a pop-up blocker. Please click Try Again.
Try Again
So I click the button labeled “Try Again,” and Safari opens the email in a new window with a “Print” tool in the upper left corner.
I click the “Print” tool. With multi-page emails, I like printing on both sides. I choose either,
Print Two-sided, or
Print either odd or even pages.
With the former option Safari prints one page of the email and stalls. With the latter Safari prints the whole series of selected pages and stalls. My printer (HP LaserJet Professional P1102w) refuses to print any more pages. I have to go into my printer’s application and stop the print job. Then I have to turn off the printer, wait a while for the machine to re-set, and turn it back on. Then I can print the remaining page or pages.
That’s inefficient. Is there some remedy to get Safari to print emails in Yahoo straight through?

Problems like that with Firefox printing look like they are fixed in Firefox 4.

New HP LaserJet Professional M1212nf MFP Will Not Print Over Network

We have a new HP LaserJet Professional M1212nf MFP. I've assigned it an IP address, static, and it pulls up on it's web interface. I loaded the printer for network printing on our Small Business Server 2003 and installed it on several PCs. No matter what we do, it will not accept a print job, even the test page. Nothing sent to it will print. I've checked print spoolers, drivers, etc. Nothing seems out of place. Any suggestions?
This question was solved.
View Solution.

Hi garak0410,
Glad to hear you have gotten the issue resolved. Have a wonderful day.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Hp 4015: Printing problem on A5 LABEL

Hi, my new HP LJ 4015 have a problem when I print A5 LABEL, because the ink are not fixed hard on label.
I Use MANUAL TRAY 1, LINEAR OUTPUT on the back oh the printer, I set Size and Label type, I try to setup Fuser setting to HIGH 2, ENABLE SLOW SPEED, but the problem are not solved.
The problem increase to the bottom of the A5 label, maybe because the ink needed more times on the fuser for fix it hard on label...
Can you please suggest me the BEST CONFIGURATION for printing LABEL on this Laserjet??
Thanks. Bye

I have a couple of suggestions here, but these are both just guesses, since I can't see the label media that you are using.
1. If the label is thick, you may want to try setting the paper type to "heavy media".
2. If the label is slick or shiny, it may not work well with any laser printer. Was this label made for laser printing?

Label Printing Problem, Laserjet Professional p1566

Similar Messages

Maybe you are looking for