Label Printing Problem
Hi
I created a smartform( Travel Card in PP).
the label is showing in Print Preview as 1
2
3
but the printouts are coming as 3
2
1 am using Zebra printer for this label
Please solve my problem its urgent
Thnaks in advance
Hi ,
sort the internal table before supplying to the smartforms .
Regards
Similar Messages
-
Label printing problem from Business Object Infoview
Hi,
I got a problem with printing label (roll) from Zebera Label Printer. The label is designed in CR XI which works properly printing from Crystal Report XI and Zebera printer prints labels (more then one labels) without any trouble.
But the same label (report) does not get printed with all its pages (labels) from the same Zebera Label Printer using BO infoview. It prints only one page (1st label) and stops.
It seems that BO infoview takes all the labels converted in pdf as one page. Where I want that each label should be considered as single page.
Any idea?Thanks Don
Yes the same report is published in the BOE.
From infoview, It prints on the screen eight (8) labels in two column on one A4 size page. While I want to have each label (W=3.9in x H 2.1in) as one page printed. So that, each label can be printed as one page on label printer.
I want to print as pdf format then printing on Label Printer.
Thanks
GJ
Edited by: GuroJee on Apr 28, 2010 1:36 AM -
Intermec PX4I Label Printing Problem
Hi,
We are facing issue while printing Bar Code Labels on Intermec PX4I label printer. While printing few labels could not print. When I tried to process the failed spool requests with the same settings again, the printer printed labels without any problem. After that the user was able to print the labels normally bust faces the smilar issue randomly. The user has to restart the printer to start the printer. We are facing similar issues on the other lable intermac lable printer as well.
When i checked the error log, I could see the below error:
SAP spool error log
=====================
Print request processing log
Character converter active when first problem occurred
Data was saved with character set 4102
Data will be converted to character set 1117 (synt = 1117)
Errors occurred processing this print request
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
OTF module: Unknown print control SC400 should be output
Most important attributes of spool request
Request number 56457
Request name LVS1 AKN
Client 100
Owner AKN
Request attributes
Time created 2010072522521300
Remaining life +00007215825
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete) D
Dispo 3 (Indirect/Direct) D
Default output device AUTZ
Default no. copies 1
Format DINA3
Main print request characteristics
Spool request number 56457
Print request number 2
Print request attributes
Time created 2010072600534800
Output device AUTZ
Format DINA3
Character converter active when first problem occurred
No information available
Any suggestions to solve this problem?Hello Abhijeet
As you rightly pointed out, inspite of the above error label printing is not impacted.
The problem is that print control SC400 is not maintained in transaction SPAD.
Please refer to OSS note 17559 for more information.
Regards
Chokkalingam Pillai -
Just tried to print out one label from an already used label sheet (5159) via Pages and found it can't. Huh? Word can.
New Pages User.What? Pages can't? That's not a good thing. Why doesn't Pages have a Label Printing facility? It's not rocket science.
-
CP1025NW label printing problem
Win XP SP3 32-bit. After page prints, the lower 4 rows of label text looks fuzzy and smears if rubbed with my thumb. Latest firmware (2011-08-26), latest driver (2.0.20110727) and selected "labels" as print media before printing. Why is this printer doing this? My old HP LJ 1012 printed the same labels just fine.
Dear Gajanan
please check SAP Marketplace. I belive your WWI version is quite old. IN the OSS number related to WWI you will find additional links to other OSS dealing with label printing on Zebra and other printers. A list of supported printesr is provided as well(if i remember correct).
Check e.g.
OSS notes in Global Label management
C.B. -
Label Printing Problem, Laserjet Professional p1566
I have this problem and it's getting me crazy.
I just bought a Laserjet Professional p1566 and I'am trying to print a Tico label (LP4W-3714, 5 collomns, 20 rows) for tubes in the lab. The problem is that when I print, the printer loses the exact position of the labels, i.e. in the vertical view, for the first rw it starts almost in the correct position, then for the last row it finishes in the 19th row instead of 20th. It means that it prints the whole page a little smaller than the actual size, so it prints everywhere, on the labels and in between as well. On horizontal aspect I have the same problem somehow. Before I had a Laserjet 1010 and it had the same problem of the vertical positioning, but not the horizontal.
Any help would be appreciatedUpgrade to CR XI R2 for free and test again
-
I have an all-in-one c4280 printer. I am trying to print labels....when I print on regular paper they are perfectly aligned. When I print on labels....it prints too high and they are all off. I have tried to select specialty paper from the printer menu..any other suggestions?
Did you find a solution to this problem? If not, I am contemplating sending HP an invoice for all of my label paper they are ruining.
HP...can you provide any direction? -
Production Order Confirm/Label Printing problems
I am currently having issues printing out labels for production orders. Whenever I confirm an order, our printer will print out a different quantity or no label at all.
Here is a brief history of production order confirmations today....
Entered Printed
80 40 (2 labels of 20)
20 No Print
20 No Print
40 No Print
ALL confirmations were accepted by SAP
SAP WILL often drag during a normal confirmation when correct labels are printed
SAP will NOT drag when a confirmation is entered and no labels are printed
Yesterday I had a confirmation for 10 print out a label for 19. All of the quantities in SAP are correct, it's only the printer that is creating labels for different quantities. If all the lot sizes in SAP are correct, what do you think the issue might be?Hi,
Based on what i understand of your query, would suggest to work with your technical person to have a look at the print program. The delay you notice or the incorrect data being printed might have to do with the program.
Regards,
Vivek -
Sapscript label prints - problem with high print quantity
Hello,
we are printing labels out of deliveries using sapscript.
To allow print copies, I have set the DIALOG to 'X' on the function call for OPEN_FORM (see below).
We usually print 1 copy for each label. It is working fine for low quantities like for example we print out five labels with a copy for each label.
But for higher quantities, for example 25 labels with a copy for each label, it is still printing out all labels, but on the copy labels, certain information are just missing. Strange thing is, the missing information all have different source tables or text fields. For example the date of the delivery is not showing up, then our part number or the shop order number entered as text field on item level of the delivery.
Is there any setting that could cause this issue? Any other suggestions?
Thanks
Anne
CALL FUNCTION 'OPEN_FORM'
EXPORTING
FORM = TNAPR-FONAM
LANGUAGE = NAST-SPRAS
OPTIONS = ITCPO
ARCHIVE_INDEX = TOA_DARA
ARCHIVE_PARAMS = ARC_PARAMS
DEVICE = XDEVICE
DIALOG = 'X'*
EXCEPTIONS
OTHERS = 1.
Edited by: Anne on Mar 12, 2010 3:39 PMProbably a bug in your code, we can't help. Only option is to debug!
-
Address Label Printing Problem
How can I create address labels for printing using Palm Desktop by Access Version 6.2.2?
I recently changed to Palm Desktop by Access Version 6.2.2 and can no longer print mailing labels as I could using an older Palm Desktop version (4.1.? I believe). I previously used Solution ID: 33579, Printing address labels from your Palm device's Contacts (mail merge), but now when I right-click on a highlighted list of records in Desktop 6.2.2, the option "Send to..." does not appear, so I cannot proceed to an Excel spreadsheet as I previously did.
Post relates to: Treo 650 (Verizon)This is another of several features that Access decided wasn't necessary in Palm Desktop 6.2.2....
Why did you change to 6.2.2? It was designed for Vista users.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
Problem printing horizontal text in smartform with zebra Z6M label printer
hello,
The situation is this:
There is a Z smartform wich prints a label to a zebra Z6M label printer with the text and barcodes vertically.
The form have a command in the main windows with the parameter: S_LZPL_SETUP '^FWR'
This label works fine, but the client want to change the form, they have told me to create a new smartform and print the info horizontally, using the same printer.
The tests i have done are the following:
create a smartform from ground and write a template text and a barcode with a new font of system barcodes. the bardoce is shown ok(it is shown horizontally), the problem is that the template text is shown vertically, as in the original smartform.
then i tried on another zebra ZM600 label printer, similar model, but not the same, and the smartform printed was ok (text and barcodes shown horizontally). So i think is a configuration setting problem, but i dont know where to search.
i have checked the label printer parameters in SPAD, but didnt find anything souspicios.
have you any idea?
thanks in advance.See these if they be of any help.....
BARCODE:
goto smartform styles-> create a style-->
create a character format.
under standard settings give the bar code name
use this style in ur smartform. select the data field which u want to barcode print and assign the character format
Similarly
SAPSCRIPT
open the form and click the character format button and
repeat the step as above....
http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/frameset.htm
Go to Character formate in your form.
create a new char formate with enable BAR code AND
you can give its type too.
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
go through these links and cose u r previous threads,
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
smartform - barcode
http://www.erpgenie.com/abap/smartforms.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
Detailed information about SAP Barcodes
A barcode solution consists of the following:
a barcode printer
a barcode reader
a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
Creating Bar code:
) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Check this thread for detail information.
How to print Barcode in te SAP SCRIPTS? -
Problem in continuous Material Label Printing
Hi Experts,
I am using SAP Script for Material Label Printing and Dot-matirx printer for printing.
There are 6 labels getting printed on a Page. There is no problem in printing but what happens,
whenever there is a new material getting printed, it skips the current page and resumes the
printing from new page.
Example. there are 8 labels for a Material-1 and 3 labels for Material-2. 6 labels for
Material-1 would print on 1st Page, the rest 2 would print on 2nd page. Now the 3 remaining
labels for Material-2 are getting printed on 3rd page which should get printed on 2nd Page itself
as there is space for 4 more labels on 2nd page.
Please help me out on this.
Regards,
Ravi.Hi ,
every material there will be started an new sapscript (probably)
You will have to change your program that way that all materials and belonging data comes into 1 internal tab.
If you print this tab in 1 big loop (instead of a nested loop for everymaterial) everything will go fine.
Sucees, Gr., Frank -
Font Problem: Zebra label print
Hi,
I'm designing label print with Zebra Z4MPlus, I can rotate the text in 90 degree, but the problem is the printed font is so ugly and letters are twisted together, I take the font 'HELVE', it should be all right, how can I solve it?!
Any suggestion will be appreicated!I've try to find font HELVE in zebra web site to upload in Z4MPlus printer, but I couldn't find ? how can I?
-
Having a print problem on a mailing label report using the merge modules.
Crystal Reports 2008 v 12.1.6.1116
when I print directly from Crystal Reports designer, the labels print correctly. If I print the report from our application software using the Crystal merge module, the top of page margin is not the same.
I am using Crystal Report 2008 Fix Pack 1.5 Merge Modules.
Any idea what might be causing this ? I do not see any settings in the CrystalReportViewer that would cause the top of page margin to change.
Note: We were using a previous version of Crystal Reports, version 11 using the merge modules and it worked just fine. After changing to the 2008 merge modules we are running into this problem.Which Version of VS.NET you are using?
VS 2008 v 9.0.30729.1 SP
. Which application you are developing desktop or web?
Desktop
. Error messages you are facing?
No error message, just the top of page margin is wrong
. Are you facing this error in development machine?
The mailing label report works just fine printing directly from the Crystal Reports 2008 Design application. However is I try to print the exact same report using the CrystalReportViewer in the merge module, the top of page margin is different. Basically printing from the designer, there is some spacing at the top of the page, printing in the vb.net app the spacing at the time of is missing.
. Are you trying to deploy this application?
Yes
. Operating System?
The OS I have tried this on is XP Pro SP3 and also Vista Business SP1
. How are you deploying your application?
We build a installshield setup to install the merge modules -
Have problem in label printing program while printing continuously
Dear Gurus,
i am working on a label Printing program. my requirement is that to print label as below in one page continuously :
Label 1 Label 2
Label 3 Label 4
Label 5 label 6
but i am unable to do , please tell me how to do this . i v already did like this:
Label 1 Label 1
Label 2 Label 2
Label 3 label 3
please reply.Imagine you have a list (itab1) with one field only (matnr). To achieve what you need, you must create an itab2, with 2 fields (matnr1 and matnr2).
In your print program do something like:
DATA: l_mod TYPE i,
l_line TYPE i.
CLEAR: l_mod, l_line.
LOOP AT itab1 INTO wa1.
ADD 1 TO l_line.
l_mod = l_line MOD 2.
IF l_mod NE 0. "position1
wa2-matnr1 = wa1-matnr.
ELSE. "position2
wa2-matnr2 = wa1-matnr.
APPEND wa2 TO itab2.
CLEAR wa2.
ENDIF.
ENDLOOP.
Verify is this code should predict some exceptions (last line or something).
Edit: last line:
ENDLOOP.
IF l_mod NE 0. "position1 was not appended
APPEND wa2 TO itab2.
ENDIF.
Regards.
Valter Oliveira.
Edited by: Valter Oliveira on Sep 11, 2008 1:08 PM
Maybe you are looking for
-
Windows Vista Wont Boot!! HELP!!
Hello -- I have owned and Acer Aspire M5641 for 4 months with Windows Vista Home Premium preloaded by Acer. I started having problems with random shut dows, restarts, blue screens. The last blue screen was 0x0000007B. I couldnt get past it, not even
-
I am moving to Sydney, Australia on a 2 year assignment. I just bought a new iMac computer here in the states. I know that the power supply is compatible and will manage the power correctly for Syndey, my only issue is where do I get a power cord tha
-
Corrective Actions Not Display in 8D Report
Hi Friends , I have the requirement regarding displaying the Corrective Action in 8D Report . I have made the Z Script. but only Correction task is getting displayed and not Corrective Actions. Even in Standard 8D Report Corrective Actions doesnt ge
-
Messages Current and Messages pending in JMS
Hello All, I would like to know the difference between Messages Current and Messages Pending in the JMS monitoring tab. I did read the official documentation but to be honest I am not sure I am undestanding it right ! Could someone explain to me (in
-
Hi. I was thinking to buy a WRT300N and build a Base Station with outdoor antennas. But I can't choise which version to buy - which is better ? Broadcom based - v1 or Atheros/Intel based v2? Also, can I connect WDS device wirelessly to the WRT300N ?