Label printing using Markpoint

Hi,
Has anybody worked with Markpoint MP 160 , MKII series printers & successfully integrated the same with SAP to print labels ? How to go about ? What should be the device type ?
This is a thermal printer & the stationery is the adhesive type.
Does printer port have any significance, normally printers are connected to LPT port but this printer is connected to COM2 port which is a serial port.
Regards,

Hi,
is you want to use Zebra-Printers you need to have a CUPS-Infrastructure (for BI Publisher Standalone), which converts your output to ZPL. To get Barcode output you need to register your barcode font on the server. Have a look at http://www.oracle.com/technology/products/xml-publisher/demoshelf/viewlets/TemplateBuilder-AddingExternalFonts.html to see how to add your Barcode-Font and use it.
Regards
Rainer

Similar Messages

Label Printing Using Address Book - How can I Print multiple labels of the same name?

Label Printing Using Address Book - How can I Print multiple labels of the same name?

I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
After printing, trash the added versions.

BarTender for Zebra Barcode Label printing using Smartform

HI Experts,
Does anyone know how to use BarTender 7.10 software to create barcode labels for Zebra printer?
I have to include a jpg Logo into the Label using BarTender.
But when I test using the Zebra printer - the logo/picture won't print out.
Any idea?
Thank You.
Best Regards,
CW

Hi There,
I had problems with using Bartender when I tried to print a logo onto my labels, but I contacted a [labelling company |www.iidsolutions.net] who specialise in barcode label printing and the bartender software, they sorted out my problem but then after a chat with them I decided it would be easier to get them to print the labels for me as I had loads of changes and they were quite cheap. See if they can help you. :~)
Good luck.
Dave.

Label-print using po qty-how to print using unit of measurement from po

I have a report that's using the po qty to determine the amount of lables to print.
However, this does not work for items when they are ordered by conversion factors other than 1. What I need help with it how to get my qty of my conversion to make it print the amount i need - some examples of orders
1- bx10 - (1 box of 10 per box) - need 10 tags(conversion is 10)
12- bags - work fine with this one - need 12 tags (conversion is 1 here)
3- bag100 (3 bags of 100 per bag) - this one i only need 3 tags(conversion is 100 but only need 2 tags because items are in a 3 bags rather then 300 individual item ( this might be a issue) This will print correctly but if a conversion is added that factors it in - i may get 300 labels which i dont need
as you can see i have different conversion for most every type of item I order.
This method seems to get close to what I need - as do other label reports I have- I thought I would feel this method out since the conversion problem seems a rather simple fix.
here is what I have for my sql query and then my select statement:
As stated I need somehow to have the conversion from the po added into the report to determine the amount of labels to print
max40385
SELECT "INVENTORY"."ITEMNUM", "INVENTORY"."ORDERUNIT",
"INVENTORY"."BINNUM", "INVENTORY"."MODELNUM",
"ITEM"."DESCRIPTION", "POLINE"."ITEMNUM",
"POLINE"."ENTERDATE", "POLINE"."PONUM", "POLINE"."ORDERQTY"
FROM "MAXIMO"."INVENTORY" "INVENTORY",
"MAXIMO"."POLINE" "POLINE", "MAXIMO"."ITEM" "ITEM"
WHERE ("INVENTORY"."ITEMNUM"="POLINE"."ITEMNUM") AND ("POLINE"."ITEMNUM"="ITEM"."ITEMNUM") AND
"POLINE"."PONUM"='24142' AND "POLINE"."ITEMNUM"='1201020021N'
EXTERNAL JOIN POLINE.ORDERQTY>={?C:\Documents and Settings\kpowell\My Documents\test table.xls: Sheet1_.Column1}
C:\Documents and Settings\kpowell\My Documents\test table.xls
SELECT `Sheet1_`.`Column1`
FROM `Sheet1$` `Sheet1_`
WHERE `Sheet1_`.`Column1`<={?max40385: POLINE.ORDERQTY}

Calculate the number of labels outside of CR

LABEL printing using Thermal printers during GR for a PO

Hi
Can you pl. let me know the steps involved to print a label on thermal printer
when GR is made against a PO.
appreciate if you can provide me with detailed steps
Thanks
Prasanna
Edited by: B.A.PRASANNA KUMAR on Oct 26, 2009 11:14 AM

Hi,
The steps are described in SAP Notes #135894 and #.
The main problem with label printers is that all these printers have their own unique printer languages which are not supported by the SAP system. So Note #183777 and #135894 describe a workaround.
All print data including all printer sequences are created by an external program and uploaded into the R/3 system. As per Note #183777, this is done with Intermec's design program LabelShop PRO.
You should use device type LB_INT to print the barcode labels. The SAP system only replaces the symbols and besides that it sends the print data to the printer which was uploaded.
So you need to design the label with LabelShop PRO or another third party program for Intermec label printers. You then need to upload the label file to a standard text in transaction SO10 as described in the Notes above.
Regards,
Aidan

Visiprise 4.2 Configuration for Label Printing using Loftware

Hi All,
I have configured all the needed stuffs in the SAP ME 4.2. My requirement is to generate the .PAS file in the Visiprise-Print-Files/Temp folder.
But instead i could generate the .DAT file inside the same folder. Have done all the configurations quite right and triggered the Assembly using Assembly Operator Dashboard(AOD) using the configured Operation and the SFC's. After doing all such stuffs i couldn't generate .PAS file. I am just wondering why it is not getting generated.
Can anyone guide me whether i am on right path or not?
Please let me know if anyone need anymore info reg this.
Thanks
Praveen

Let me kick in my $.02.
I'm guessing that IT doesn't have auto-discover turned on so you're fending for yourself. In my case, I tried copying the exchange 2007 settings from another mac user at work but they didn't work. I was trying to switch from the webmail settings to newer ones and the manual method of just trying to overwrite the old didn't work.
Then I used the wizard to create a new 2007 account and autodiscover kicked in and I'm connected. What's weird is that the server settings looked exactly like what I entered manually. Go figure.
Back to your question. Before I used auto-discover, I was using web mail server information and it worked. It only used the server info without http or https stuff. Using your example, i looked like webmail.xyz.com.
One more thought. I think you may get some help looking at any other mail client settings except outlook. If you can find someone at work using Thunderbird or Outlook Express, copying their working settings can't hurt. In my experience, the settings are often the same. YMMV.
Your vpn comment is interesting. Using the webmail settings, I had to use Cisco VPN when dialing in from home. At work, it wasn't necessary. My suggestion is to test your settings at work to eliminate the VPN as a factor.
I also found Applecare to offer decent help when I previously ran into exchange issues. But if I had a magic wand, I'd get the IT people to turn on auto-discover for you based on my experiences.
Good luck.

Label print using smartforms

Is it possible to print labels based on GR qty.
Example: in my GR I have material with 100 CAR when I press print icon, the system has to print 100 Labels.
Regards
GK

Hi,
Follow the below steps.
1.Create a smart form(Z_GR_QTY_LABELS)
2.Put all the data in an internal table which has to be printed on the males.(One row corresponds to one label)
Hence the number of row in the itab are the GR qty
3.Create a loop and put the condition
To create a loop:Right click>Create Flow Logic>Loop
and put condition on Condition tab(Give sy-tabix LE Gr_qty )
4.Save and activate
Note:
Take care explicit page break.
Hope this helps you.
Regards,
Rama.

Custom Label Printing Using BI Publisher

I looked at the example of AveryLabel3x10, But I need to do for 4x8 labels with each label size 2'' W x 1.25'' H on A4 Sheet, Each label as gap of .063''. I tried to extend the above example but couldn't do it. Any help is higly appreciated.
Thanks in Advance
Raj.

You can get it from here http://blogs.oracle.com/xmlpublisher/templates/xsl/

Issues with Crystal 2008 Printing to a Zebra Label Printer with SP2

Hi there
We are having issues printing to a Zebra Label Printer using Crystal 2008 SP2.
When you attached a .rpt file to the .NET Application which is accessed via RDP/ICA the reports in Crystal XI worked fine.
Steps we have taken are:
Printing direct from Crystal 2008 Designer to the Zebra Printer works using a Generic Text Driver
Printing direct from Crystal 2008 Designer to the Zebra Printer using a Zebra Universal Print Driver DOES NOT work (we were advised the Universal Print Driver may assist with the issue)
The report when accessed via the .NET Application via RDP/ICA using the Universal Print Driver it doesn't work.
The report when accessed via the .NET Application via RDP/ICA using the Generic Print Driver it doesn't work.
The report when accessed via the .NET Application drectly from Server Console prints fine using Generic Print Driver, but not with RDP/ICA.
Can anyone offer any suggestions to a fix?
Many thanks.

Hello,
I'll look at this tomorrow when I get into the office. An I am moving this to the developer forum.
Thank you
Don

Label printing problem from Business Object Infoview

Hi,
I got a problem with printing label (roll) from Zebera Label Printer. The label is designed in CR XI which works properly printing from Crystal Report XI and Zebera printer prints labels (more then one labels) without any trouble.
But the same label (report) does not get printed with all its pages (labels) from the same Zebera Label Printer using BO infoview. It prints only one page (1st label) and stops.
It seems that BO infoview takes all the labels converted in pdf as one page. Where I want that each label should be considered as single page.
Any idea?

Thanks Don
Yes the same report is published in the BOE.
From infoview, It prints on the screen eight (8) labels in two column on one A4 size page. While I want to have each label (W=3.9in x H 2.1in) as one page printed. So that, each label can be printed as one page on label printer.
I want to print as pdf format then printing on Label Printer.
Thanks
GJ
Edited by: GuroJee on Apr 28, 2010 1:36 AM

How to make use of label printing in sap smartforms

Hi Dear,
How to make use of label printing in sap smartforms.. I need to print four records from internal table into sap smart forms. It will
come as four labels.All page should follow the same procedure... How to do...please help me..
Regards,
Nikhil

Hi,
Please go through below link, would be helpfull for you.
[http://help.sap.com/saphelp_nw04/helpdata/EN/6b/54b4b8cbfb11d2998c0000e83dd9fc/frameset.htm]

Having a print problem on a mailing label report using the merge modules.

Crystal Reports 2008 v 12.1.6.1116
when I print directly from Crystal Reports designer, the labels print correctly. If I print the report from our application software using the Crystal merge module, the top of page margin is not the same.
I am using Crystal Report 2008 Fix Pack 1.5 Merge Modules.
Any idea what might be causing this ? I do not see any settings in the CrystalReportViewer that would cause the top of page margin to change.
Note: We were using a previous version of Crystal Reports, version 11 using the merge modules and it worked just fine. After changing to the 2008 merge modules we are running into this problem.

Which Version of VS.NET you are using?
       VS 2008 v 9.0.30729.1 SP
. Which application you are developing desktop or web?
       Desktop
. Error messages you are facing?
        No error message, just the top of page margin is wrong
. Are you facing this error in development machine?
       The mailing label report works just fine printing directly from the Crystal Reports 2008 Design application. However is I try to print the exact same report using the CrystalReportViewer in the merge module, the top of page margin is different. Basically printing from the designer, there is some spacing at the top of the page, printing in the vb.net app the spacing at the time of is missing.
. Are you trying to deploy this application?
       Yes
. Operating System?
        The OS I have tried this on is XP Pro SP3 and also Vista Business SP1
. How are you deploying your application?
        We build a installshield setup to install the merge modules

Primera LX 400 Label Printer No Longer Working with Mountain Lion

Hi-
I upgraded my OS to Mountain Lion and most everything works OK except my Primera LX400 label printer. The error message I get when trying to install the driver is "Software for this printer isn't available from Apple. Contact the printer's manufacturer for the latest software."
I contacted Primera but I haven't received an answer yet. Anyone else solve this problem with Mountain Lion and Primera Printers?
For those that depend on the Primera printers, you might want to wait before upgrading.

For those with the same problem, Primera says they will have new drivers up 7/31/12:
http://www.primera.com/primera_printer_drivers.html
I decided to check a day early (7/30/12) and the driver for my LX400 is up and I was able to install and use it successfully.

Label Printing issues on Crystal Reports Server

I built a label that prints off beautifully on my local machine with Crystal XI installed. However, when I post the label to the reports server, and a user tries to print it off, it prints off two blank labels behind each good label. I have racked my brain on this for days. The printer settings are identical to my local machine. Any idea what might be causing this?

I think the following information might help you
Symptom
A label report was viewed over the web using the Web Component Server, and printed on a label maker printer DYMO 330. The labels were being resized to 8 1/2 x 11 instead of printing the size of the label. Even after selecting the correct size, the labels print one per page, followed by 3 blank labels.
When printing was done through a distributed report or the report designer, the labels printed to the correct size and only printed one label with no blank labels.
What is causing the label report to print incorrectly when printed from the web viewer?
Resolution
Steps to Resolve
1. Open the report in the Crystal Reports 8 designer on the web server.
2. Click on 'File' then click 'Printer Setup'. If a printer is already selected then set it to 'No Printer', click 'OK', then save the report.
3. Click on 'File' then click 'Printer Setup' again. Select the default printer and clear the 'Default Properties' checkbox.
4. Click 'OK' and save the report.
5. Click on Start > Settings > Control Panel > Services and double click 'Seagate Page Server' service. Set this service to run under an 'Administrator' account.
6. Stop and restart the service, and close down all browsers.
The label reports now will print successfully over the web.
Background
Incorrect printing from a web viewer can have several causes, including:
· The report is designed with a designated printer, but the encapsulated page format (EPF) files are being created in 'No Printer' mode.
· The server does not have access to the printer.
· A valid printer is not saved with the report on the server.
· The printer driver is not installed on the server.
Regards,
Raghavendra.G

Cannot Print to CUPS Printer, UPS Label Printer

After upgrading to Mavericks, I can no longer print to my UPS Label Printer which utilizes the CUPS drivers. I have tried deleting the printer and reinstalling it. No luck. All other printers are working fine. Any ideas?

This is all about the driver!
Canon doesn't provide drivers that will work for a Windows-shared printer. You have to use a CUPS driver for that.
Your model isn't directly supported by Gutenprint (CUPS drivers included by Apple in OS X), but the newer Gutenprint has iP4500 and several models "close" to yours:
http://www.linuxfoundation.org/en/OpenPrinting/macosx
Experiment with a couple Gutenprint models.

Label printing using Markpoint

Similar Messages

Maybe you are looking for