Labeling all images in a stack; when all images are stacked

A long time ago, when I was using Photoshop Elelments I found a plug-in that made it possible to work with stacks as a unit.
If I labeled the top image in the stack that lable was applied to all the images in the stack; then I could sort the the image on top and all the images in the stack would stay together, or if I deleted an image in the stack all the images in the stack were deleted. Without it I have open each stack I lable and apply the lable, so when I sort the stacked images they stay together.
I don't remember where I found that plug-in and I'm sure it would work in Photoshop. Anyone else use it and know where I can find it?

I do not use Lightroom when you wrote "Stack" in Photoshop that refers to the layer stack. The link you posted seems to be more about paring files. I do not know much about lightroom except it organizes your images using logical databases. Lightroom calls this its Library system. I know the book libraries have book stacks so it would surprise me that Lightroom had some type of stacks. You started by stating when you used PSE you used something to manage stacks. I thought now the you are using PS you needed something for it. This thread most likely belongs in the Lightroom forum.

Similar Messages

When downloading images to photoshop all images are labelled as img.even the RAW ones. How do I change this.

When I download the images from my Canon 70D into Photoshop CC all the images are labeled as IMG, even the RAW ones. How do I get the images automatically labeled as RAW?

Hate to ask the obvious, but do you have your Canon 70D set to save both RAW+jpg?
On your computer do you have 2 files for each photo, but the file size is much larger for one of them?
Are you using ANY software to download the pics from your camera to your hard drive. If so, check the setting to make sure they aren't converting Raw CR2 to jpgs automatically.
The best procedure for transferring is to buy a card reader for a few bucks.
Remove your memory card from the camera and insert into card reader.
Copy or Drag your files to your hard drive.
After this is done. remove the card and replace into your camera
The reason for this last procedure is to make sure you don't accidently open the image from the card reader and then attempt to save it not realizing the computer is trying to save it back to the card.

Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

Photomatix plug-in's HDR merged image has suddenly stopped showing up as part of the stack, yet when I repeat the merge it warns that these images are already merged. I have the merged image labeled with a HDR suffix.

Photomatix plug-in's HDR merged image has suddenly stopped showing up as part of the stack, yet when I repeat the merge it warns that these images are already merged. I have the merged image labeled with a HDR suffix. Worked fine until now. Thanks

I am not sure what's happening with IE9 (no live site) but I had real problems viewing your code in Live View - until I removed the HTML comment marked below. Basically your site was viewable in Design View but as soon a I hit Live view, it disappeared - much like IE9. See if removing the comment solves your issue.
<style type="text/css">
<!-- /*Remove this */
body {
 margin: 0;
 padding: 0;
 color: #000;
 background:url(Images/websitebackgroundhomee.jpg) repeat scroll 0 0;
 font-family: David;
 font-size: 15px;
 height:100%;

Hi all, when I open a New Tab pg all the images are blank - I've tried clicking on the blank images, & dragging a link from the Bookmarks, without success!

I want to achieve at least one of two things: either set New Tabs to open with Google automatically; or at least, to have Google pinned to the New Tab page. (Google is my home page.) When a new page opens, all the images are blank. I've read through the Help pages & tried various things. I've tried dragging Google from the Bookmarks to the New Tab, but this only opens Google. I've tried clicking on the blank images, but nothing happens. I've toggled the blank images off for now, so at least I don't need to look at them. I am doing a university course online, so efficiency is really important to me! Those extra clicks really add up & distract!... Thanks in advance :)

# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Type '''browser.newtab.url''', in the bar on the top of the page.
# Double click the first result, '''a new window should appear'''.
# Type '''www.google.com''' in the window, click ok.
# '''Open a new tab''', does it go to google?

I save my images to my hard drive then pull them into lightroom. Now when I do this my images are changing- they look like I've added a preset but all I have done is imported them. Can anyone help me with this?

My images are changing once I import them into lightroom. Initially they look the same as BOC then it changes image by image as if it is adding a preset. I am not aware of any changes I have made to the program.

I'm not sure how that changed, but I am so grateful for your knowledge!!! thank you, thank you, thank you!!!!!!!

After I covert my excel file to PDF, my images are cut off or not appearing at all HELP?!

Hello!
I am creating a Exel Work book and converting it to a PDF file (easy to share online).
Once I convert the Excel Work book, some of my images are cut off or not appearing at all.
Which I find weird because some images pop up just fine.
These images are originally flats from Adobe Illustrator I converted to pictures with Excel.
So why is that when I convert my workbook to a PDF file some images show through and others don't?
Please Help!
ORIGINAL EXCEL FILE
Once I save it as a PDF File. Other pages are fine except this one?

Correction for above: 'Bit depth' not ' Bid depth'

I'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?

i'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?

What is the source & link to this 8 GB kit please?
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/HT1547

Firefox is failing to display many (but not all) images on websites that I visit, some images are shown and some are not even if they are in the same format.

I recently changed my ISP because I was having connectivity issues. In particular my router would shut down sporadically. As part of my attempt to clear issues I ran some spyware software which I've been told I could trust. Since then I have a problem viewing many websites as many (but not all) of the images are missing, even on websites that I know very well, including my own. What is very strange is that on one site every page has a jpg image under the navigation bar and all of these jpg's appear except one which doesn't appear even when I reload images. This problem also makes security sensitive sites like my bank site look very amateur which frightens me. The problem does not occur on other web browsers.

Which ''spyware software'' software did you run?
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load

I made an iPhoto book but now all the images are gone?

I recently made a book in iPhoto and never finished it. When I re-open the book in iPhoto, the formatting and all the text exists but the images are all gone. Is there a way to try and rebuild it? Thanks-M

Do the following: make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

I am using Firefox 23.1 all of a sudden images are not displayed, I have started in safe mode, installed a new version and nothing help

I have tried everything from re-installing FF 32.1
restarting is safe mode
re-examined all extensions to see if any could be cause it and disabled some and nothing.
I will NOT go higher than 23 as I have many more problems when I was in those
I have a mac. ...10.8.5

If images are missing then check that you do not block images from some domains.
*Tap the Alt key or press F10 to show the Menu Bar
Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "Block Images from..." has a checkmark then remove this checkmark to unblock images from this domain.
Make sure that you do not block (third-party) images, the permissions.default.image pref on the about:config page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong

Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

'''''thedanbot''''':
I am not sure that your image matches '''''Apoth's''''' description as I interpret it.
Have you tried Firefox Safe Mode to see if an Add-on is causing your problem?
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]

I am try to print a sheet of avery labels all with the same info on them. Does anyone know an application that I can do it in?

I am trying to print a sheet of avery labels all with the same info on them. Does anyone know an application that I can do it in?

Welcome to the Apple Discussion Forums! This is your first question, right?
This took a long time for me when I was printing my Avery labels. Pages doesn't seem capable of doing it, but you can do it on MS Word 2011. Try searching Google for more alternatives.

No images are loading in Firefox normal mode.. But I can see all is normal in safe mode

When I open the Firefox in normal mode, no images are displayed. for eg.. in Google, the Google image is not displayed. Also all the other websites are having no colors. But everything is normal in the safe mode.

If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

All of a sudden, background images are poor quality in distilled PDF

Exporting through XMPie to Postscript, all images in PDF are bad when distilled back to PDF. Any ideas?

Well let's see. High Quality Print, Press Quality, FieryOptimized, Standard, and don't know what else.
Yes they looked good before. The art is .ai vector. I tried a couple different formats. Just noticed I have had two jobs in a row doing this.
Preferences Page Display: smooth line art, smooth images are both checked.
Hmm. Exporting from the InDesign page to PDF produces a good PDF. Exporting (spooling) with XMPie and then distilling produces a bad PDF. I'll have to start digging when I get a few minutes. Could be an XMPie question if I get the same results with different distiller settings.

Hi all, I have 15 images in a file. Every images are continues of previous image. i want to stream all images into my application( Like video). Any ideas?????

Hi all,
I am trying to show an real time video. From my ip camera the sequence of images are stored in particular folder. Now i want to stream all images like video in my application. Have any ideas??????

Search the forums since this is only about the umpteenth time this question has been asked. We are not a buyer's guide here.

Labeling all images in a stack; when all images are stacked

Similar Messages

Maybe you are looking for