Labels disappear in Bridge CC slideshow.

Recently I upgraded to Bridge CC from CS4.  And now while editing in slideshow mode (ctrl-L) all stars and labels disappear once you move onto the next image. 
The colour labels from previous edits are still there, but I can't make new ones or changes. 
When in camera raw mode any labels applied stick but that is not efficient for editing. 
Can anyone help me with this problem, as I need to use the slideshow and label system when I sit down with clients. 

Bridge will run on a network, but it is not well suited for this task.    I know nothing about servers so maybe someone with network experience will jump in.  Labels should be permanent unless the file location is changed and the xmp file not moved with it.

Similar Messages

  • Bridge Labels disappear from folders

    We store our folders on a network server and for some reason only some of the labels disappear a few weeks after they are applied. In this latest case 178 of 446 folders which were previously labelled are no longer labelled. When this happened before it was ~216 folders that lost their labels about 2 weeks after they were applied. The server is running XP w/ CS5 (very rarely opened) and the workstations are on Win7-64 with a mix of CS6 and CC. I have opened the bridgelabelsandratings file and seen everything listed there correctly, and no one else has access to the server to restore to a previous state, so I have run out of ideas. Has anyone else run into similar problems and found a solution?

    Bridge will run on a network, but it is not well suited for this task.    I know nothing about servers so maybe someone with network experience will jump in.  Labels should be permanent unless the file location is changed and the xmp file not moved with it.

  • On Pie chart rotation - the labels disappear

    I am using followig to rotate a pie chart:
    <mx:Rotate id="rotate" angleFrom="{angle-90}"
    angleTo="{angle}"
    target="{myChart}"/>
    private function rotateImage():void {
    rotate.end();
    angle += 90;
    rotate.play();
    <mx:PieChart id="myChart" dragEnabled="true"
    dragComplete="rotateImage()">
    So, when a user tries to drag the pie chart, the chart
    rotates. The
    chart rotates fine but the labels disappear? why would this
    happen and
    any solution to this.
    Also, I would like to use some other event for rotation
    instead of
    dragComplet. I would like to do it when user clicks left
    mouse
    button+moves the mouse (both on the outside of the chart)
    Any suggetions?
    Thanks in advance.

    Are your fonts embedded? Rotating non-embedded fonts makes
    text disappear during rotation.

  • Cant label files in bridge

    Hi all,
    I'm on Mac Leopard and running the newest version of photoshop 5.  I've come across a bit of a glitch.  I've just downloaded some files from a DVD from a friend's camera and I can not label them in bridge.  The labels will not stick to these files with key commands or even from selecting the drop down menu. Any thoughts?
    Thank you,
    Julia

    AHA!
    Yes, they are "read only".  Yet is it still possible to open the files and work on them...is the read only designation geared just to file naming/labeling?
    Thank you!
    Julia

  • How do I rate and label files in Bridge CS6?

    Fulltime student and a new cloud member. Having problems with first project. I can't nor can the instructor figure out why I'm not able to rate and label files in Bridge CS6.

    No clue why I didn't think about this.
    Isn't that why we are here?...
    But serious, I understand your wish for a big preview but not your wish for clicking, never been a fan of RSI myself
    It is a long standing issue rating and labeling are not the same in all circumstances but clicking in the preview window might be a difficult wish to fulfill. There are many ways to use Bridge but if you like big previews consider this:
    In the Bridge prefs advance tab select 'generate monitor sized previews' (this should create good full screen previews)
    Then either select a bunch of files in the content window you want to judge or just start at the first file.
    Hit space bar and full screen preview starts showing (when all files have been cached it should take very less time or real time to show good previews.
    With arrow keys cycle through the files and with cmd + . or cmd + , (comma, I now realize I had it wrong in the other post) to increase or decrease ratings. All the keys are adjustable with only one hand and very close to each other. And clicking on a spot does show a 100 % preview of that part.
    But as said before, so many users, so many workflows

  • Anyway to import just labeled images from Bridge to LR?

    Is there a way to import into Lightroom, just your labeled images from Bridge?
    I navigated to a folder and LR does not even seem to show the labels at all, nor less a way to import only labled images. thanks.

    LR does not even seem to show the labels at all, nor less a way to import only labled images
    Labeling is not universal as star rating seems to be. I have several apps that read each other star rating none of them reads label. Also when having change the default name for labels often the older files with color label have still the at time assigned name but loos the color and change to white.
    Is there a way to import into Lightroom, just your labeled images from Bridge?
    Create a folder that you can easy access when importing from LR. In Bridge select the label(s) you want in the filter panel and move or copy the labeled files to that folder. Now in LR you can import them.

  • Unit label disappears when replacing to system control

    In LabVIEW 2010, when changing a controller or indicator with unit label from 'modern' to 'system' (or vice versa), the unit label disappears. It becomes empty.
    Somehow it is still active (no coercion dot appears), but hidden from view. A bit annoying. 

    The fact that no broken wires or coercion dots appear means, that the unit is correctly transfered. However, the unit label text is empty.
    So, it is working, but partly and weirdly.

  • Can't rate photos in Bridge - options seem to have disappeared and Bridge is not responsive?

    When I'm going through my photos to begin culling, I can't seem to rate any of my pictures.. I don't know how or why this has happened because I could do this a few days ago. When I use the hotkeys to rate photos now nothing happens, and even the Ratings filter option seems to have disappeared. I've purged the cache from the folders and nothing seems to help. I'm using OS X Mavericks and the latest update on Bridge.

    I'm in the same boat. I used the same computer to rate some of the photos and after a repair and complete re-install I can't rate anything anymore.

  • Can't label files in bridge, and problem with starred files

    I'm working with CS3 on saving raw files to jpegs, and I usually organize them by 5 starring my favorites as well as labeling them, and just in the last 2 days Bridge has been acting up and won't label the files. Also, it will 5 star them, but only about a 1/4 of them show up in the filter as being starred. Any ideas? I already checked my access, and I can read and write to them.... the only thing I can think of is that I ran a few updates a day or two ago.... help! this is getting really frustrating and slowing down my workflow...

    http://forums.adobe.com/community/bridge/bridge_macintosh

  • How can i retreive photos that have disappeared in bridge?

    i just started using bridge. yesterday i filled it with photos from my photos file.  i stacked the photos to concentrate and make it easier to find the one i want. 
    today i opened the bridge program and all of the photos have disappeared.  how can i get them to show up again on bridge? what did i do wrong?

    i figured that out - but now i can't yet figure out how to move photos from "my photos file" on my computer to adobe bridge.  it must be so simple that i can't see how it is done.  lots of stuff available about how to move from a camera or from picasa - but how to just move from regular microsoft files to adobe bridge. 

  • Bridge CS4 Slideshow & Tripod web hosting

    I have not been able to fully open the slidshows I have created in Bridge and ftped to  'Triod' where my website is hosted.
    [Please no snickering over my web site being on Tripod.]
    I have contacted Tripod but have not received a response so far.  I have tried the HTML slideshow as well as the 'Lightroom Flash' version.  I can't get either to properly work.
    I have gone into the files and made sure that the jpg file names were not too long, and things were in lower case, and that kind of thing.
    Needless to say, when I open the slideshows in Dreamweaver, they work.
    If anybody has an inkling as to what might be happening, and how to fix it, I would appreciate it.. I am not proficient enough in code to figure this one out.
    Many thanks!

    Yeah, and I don't see a 'show file names' box on the templates I've looked at.
    What I did was go into the group.xml file and I could find the TITLE tags and changed those to what I wanted for my caption.
    Still seems somethings not right, since I had to manually add them.

  • Color label disappears

    I put a color label (In Finder, File-->color label) on a document or folder but it stays only a few hours (I think that at midnight it disappears) Why ? (remind me of Cinderella)
    All the other colors I made in the past stays.
    There's probably no connection but the only change I made recently was upgrading Safari from 3.2.1 to 4.0 and after 24h or so I asked an exorcist to take me out of there ASAP, so he killed 4.0 and I went to Safari 3.1.1
    Probably a coincidence.

    I am confused.
    This problem belongs to more people than just to me.
    I thought that, if there were no solutions, after a reasonable time, someone from Apple will reply and try to solve the problem.
    That has not happened.
    Mark B Anstendig
    915 Fulton Street
    San Francisco, CA 94117
    415-775-3575
    [email protected]
    www.anstendig.org
    www.anstendig.com
    www.hamburgastrology.com
    www.pathofliberation.com

  • Bridge CS4 slideshow limitation

    I am trying to do a flash slideshow in Bridge CS4 in Windows. I viewed the tutorial, it seemed simple enough. However, whenever I try to do it, there is a limit of only ten files. Even if I drag fifteen or twenty files into the slideshow window Bridge only accepts 10. Anybody else had that problem?

    Don't have CS4, but in CS3 there is a limitation to display 10 images in preview window, but don't follow how that applies to a slideshow. Perhaps CS4 is different, but why not just do a sideshow by clicking on that option, no dragging necessary?

  • Cartesian Data Canvas - Label Disappearing

    Hello All,
    I have an issue in that I currently have a Catesian Data Canvas that is sitting on a line chart. I'm positing some lines and a label on the chart at specific data points, all is working fine. I have a slider which 'moves' the user along the chart depending upon the two points on the slider. What im finding is that when the label moves 'off the side of the chart, it disappears as expected, but when when scrolling back to the position the label doesn't appear again but its actually gone. However, the two lines which i have created are still visible.
    Could anyone let me know why this is disappearing? Im assuming its something to do with Flex removing the child label for garbage collection purposes.
    Any help would be much appreciated
    Craig

    "Wirawannaga" <[email protected]> wrote in
    message
    news:gk6db3$e29$[email protected]..
    > Hello everybody.. I have array and Canvas that generate
    by Repeater from
    > array
    > length. The problem are I can assign my Canvas Label
    with repeater
    > currentitem
    > but it cannot assign the data in my Canvas ID. Can
    anybody help?
    Check out
    http://www.magnoliamultimedia.com/flex_examples/Amys_Flex_FAQ.pdf
    Q9

  • Finder Color Labels Disappear

    At my work, we use the Finder color label feature extensively for collaborative projects in order to mark who has worked on what files on our server. Recently, though, my labels have all disappeared. I'm unable to see the labels I had previously set and I am unable to view the labels others have set as well. My colleagues can see the labels just fine on their computers. I haven't seen a lot of people have this particular issue, but I have seen a fix online where you go into the Terminal and delete the DS_Store files and let OS X rebuild them. Please advise.

    I have a similar issue, but unfortunately no fix.  My labels don't disappear immediately though.  They will stick around for days or even weeks, then suddenly vanish.  I'm running Snow Leopard 10.6.8.  Anyone know of a solution.  I tried the DS_Store thing to no avail

Maybe you are looking for