Labels in a web chart

Hello,
I would like to add labels to points in a XY-chart. The labels should show the text of the Info Object which belongs to the value of the data series. For instance you have 10 plants, which have different values of a key figure. Now the name of each plant should be shown next to the corresponding point of the data series.
Does anybody know how to solve this problem?
Does a list exist, which entries are allowed in the Format Label field in the chart designer? ($label, $abs, $series etc.)
Thx for every help
Michael

Yes I´ve checked the help already, but it doesn't seem to explain all possibilities you have with the format entry. For instance $Series is missing and also the possibility to display negative numbers in a different format. Does anybody know about a document, which describes the possibilities of the chart engine?
The note you mentioned provides another piece of information, but it does not explain how to display the text of the corresponding InfoObject as a label. Maybe it is not possible.
Regards Michael

Similar Messages

  • How can I show a 0% range in the data value label on a bar chart thanks?

    How can I show a 0% range in the data value label on a bar chart thanks?

    I'm not sure what the question is. 
    I know that if you have a bar chart and one of the categories (X-axis) has bar (Y value) equal to 0%, no bar is plotted for that category. Even the addition of a stroke (line) around the bars doesn't make one appear for 0%.  The only automatic way I know of to make it look like there is data in that category is to add the value labels to the bars. Inspector/Chart/Series, select one of the bars on the chart, click on "value labels". Another method that is a workaround is to fudge the number a little in your table so that instead of 0% it is a very small %.  This will get you a thin line on the chart.
    But if your question is about the value labels (the numbers that display on or in the bars) and you are not getting one for a bar that is supposed to be 0%, it probably means your table doesn't actually have a 0% in the corresponding cell. A blank cell in the table will not get a value label.

  • How do I get more than 10 Y axis chart labels on a line chart

    I cannot find a way to get more than 10 y axis labels on a line chart. In AppleWorks you set your step size so a size of "10" which in my case equates to labels of 10, 20, 30, ..., 80, 90 and so on up to the MAX value. I would often have 20 or more labels. In iWork the size is the number of labels and the maximum size (number of labels) I can display is 10. With a min value of 30 and a max value of 330 each label jumps 30 points which doesn't give the resolution I need to see...and....when showing the data point values on the page in iWork they overlap each other and are unreadable even when stretched out on legal paper.

    What I am calling the X axis (horizontal) you are calling the Y axis. I need more than 10 labels on the vertical axis. Space for text is not a problem. I already have done exactly what you suggest for the horizontal axis. What I need is to get 30 value labels on the vertical axis (You show 5 in your example) along with the many more than 10 I have on the horizontal axis. The 10 through 300 value labels run vertically, and roughly 90 data points, one per day covering 3 months runs horizontally with a date label every 7 days. This graph represents values recorded daily at the same time each day.

  • Link from WEBI chart to WEBI report

    All, how can I link a WEBI chart (column) chart to an detail WEBI report. Appreciate any inputs.
    Thanks,
    Ann

    Hi Ann,
    You can use the chart bars as reportfilter (much like the dropdown box filter effect),
    It is actually implemented as an input control, so you can control a detail table below the chart by clicking on a chart bar.
    However hyperlink from the table is not possible in BI40 (yet).
    (Right click the table, Linking, Add element link).
    So you either have to use the data in the same report option, or use the hyperlink option from a table cell...
    (Right click the cell, Linking, Add hyperlink).
    As I noticed you are using BICS, before jumping to using dashboards (FKA excelsius), be aware that the BICS connectivity in there is still the version running on BW, so unlike a WebI report, you have to publish the dashboard in BW and access it via an SAP portal environment, you cannot run it directly from within BI launchpad (in BI41 this will change). So to link from the portal environment to the BI launchpad for the WebI document you would need some portal integration work too.
    Hope this helps,
    Marianne

  • Labels on 3d Pie Chart overrunning

    Is it possible to rotate the labels on a 3d pie chart so they don't run into each other? I have a case where there are small values with a label that running into the next label over for an item?
    I believe this is corrected in the newer versions of any chart, but I am limited to the apex 3.2 version of anychart, since I am hosted on a 3rd party site..
    Thank you,
    Tony Miller
    Webster, TX

    I understand that the feature is not available in current version of APEX Flash Pie charts now.... Can only hope when APEX 4.0 comes out we get newer version of anychart..
    Question, can you eliminate the labels on a Pie chart and just have the pie chart and a legend with labels and values?
    Thanks,
    Tony Miller
    Webster, TX

  • SAP BO ,WEBI Charts: Want to display top 10 departments

    Hi Guys.
    I am new to webi charts,
    In Webi charts, I want to display the top 10 departments who are spending more in printing with amount, if possible year wise.
    But the chart which i created it is not looking relevant and very confusing.
    And in Legend it is displaying all the departments and that to it is not fitting in one page,
    So i am thinking to display only top 10 departments, Can you help me.
    we are using 3 version

    You can do this with the Ranking function of Webi.
    Select the chart, then select the Rank icon in the toolbar, and add the rank. For example, you'd select the top 10, based on a measure of amount, for the dimension of year.
    Hope that helps.

  • Web Charts 3D - Need Help

    Hi all,
    Does anyone have experience with web charts 3d? If so, could
    you please hit me up on google chat or send me an email? Email:
    hardkor74 at gmail.com or screen name HardKor74
    Thanks!

    This is not a trivial task, but if you have not done much work with 3d programming before then Java3D is probably the best solution for you. It is not part of the standard Java runtime so you will need extra downloads for people who do not have it installed to view your applet, however iirc you can set this up to download automatically when you get going.
    The java3d download page has a link to a starting tutorial, but after that you will probably want to get a book on the subject. I recommend the Selman one.
    There is no getting around the fact that 3d graphics are hard to do and if you want it to look good expect to spend a long time mastering the maths and the terminology- this is the case whatever environment you are using.
    Java3D is free to download from the sun site- I would suggest that you get hold of a copy and the tutorial and see how you get on with it.

  • Web Chart - Plot Total Column as well

    I have a requirement of producing a report that has a date down the side, and then each plant within a country across the top.
    ie
           Plant1    Plant2   Plant3... Total For All Plants
    Date
    date1
    date2
    Using the web charting tool, is it possible to plot the data for each plant, and also the Total for all plants on the same chart? I have found that the total normally doesn't plot on Web reports (which in most cases is good), however I thought there might be a setting that I was missing.
    I am using BW3.5
    Thanks in advance for any assistance.

    Hi Madhukar,
    Yes, I got it in the same chart.
    in the WAD, if you click on the web chart item, and then look at the Web Item tab in the properties section, there is a property called Suppress Sums. Ensure that this is NOT checked, and the totals will be plotted as well as the detail rows.
    Hope this is helpful.
    Regards
    Rich

  • How do I remove the drop shadow from the value label on a bar chart?

    All of the shadow settings are disabled for the value labels, and for the chart in general, but the shadows still show. Any ideas on how I can remove them?

    ensure you have selected the label, not the graph:
    shadow on:
    shadow off:

  • Can we change the label of Java Web start at the time of downloading applic

    can we change the label of Java Web start at the time of downloading application?
    At the time of downloading application(jar files) java web start shows "Downloading Application" lable on it window , so can we change it so some other..

    The 'splash' screen might be of interest to you.
    Here is the quick description from the FAQ.
    <http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/faq.html#206>
    Section 3.5 of the JNLP Spec. has more details on using a splash screen for an application.
    (But if you mean changing the very first screen seen when downloading an application the first time, the answer is 'no'.)
    Late addendum..
    By the way - now I review your question, I note you stress 'while jars are downloading'.
    There is another strategy you might take. Mark most of the application jar's as 'lazy' download, get the main GUI on-screen quickly, then use the JNLP API's DownloadService to fetch the rest of the jars, after the application is running.
    This has the advantage that, then we can have complete control of whatever is shown on the screen during the bulk of the downloads. We might show ..a 'splash screen', or a dialog with the application name on it, or a progress dialog, ..or any combination of the three.
    Edited by: AndrewThompson64 on Oct 22, 2007 3:01 PM

  • Web Chart - Display Minor Ticks, but not minor gridlines - BW3.5

    We have recently upgraded to BW 3.5, and I am still trying to find my way around the web chart designer
    I want to have major and minor tick marks shown on the vertical axis, but only gridlines on the major tick marks.
    Can anyone tell me where to find these settings?
    I have managed to turn the minor tick marks off, which removes the gridlines and the tick marks, but I still want the minor tick marks to be visible (As I was able to do in the previous version)
    Thanks in advance for any assistance!

    I think I have found out how to do this.
    You set the colour to none. Simple, and yet inconsistent with other areas of the chart designer.

  • Find/View Labels via TFS Web Access

    Is it possible to search or view files by label using TFS Web Access 2013? If so, how?
    Thanks in advance!

    Hi John,  
    Thanks for your post.
    No, as far as I know we cannot view the labels in TFS 2013 Web Access.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Webi Chart Height Auto Adjust per Data

    Can you auto adjust the Webi Chart Height based on amount of data shown?
    Category Axis - Dimension called Request
    Value Axis - measure called Views
    when the requests displayed is about 10 or 15 on the category axis the chart looks good, but when the unique value of requests increases to lets say 50, the chart tries to cram them all in the same space instead of auto adjusting for a better view, Any way the height an be dynamic?

    Hello,
    As per my knowledge we can't do auto adjust..
    Thanks,

  • Is it possible to create a hyperlink in a WebI chart?

    Hi,
    I am trying to create a grouped bar chart in WebI (BO XI 3.1) in which clicking on a column should open a different WebI report, passing the selected values as parameters to the report. I have tried to create a hyperlink on the x-axis dimension object, but even when the "read content as hyperlink" option is checked, the axis labels still show the "<a href=http .... " text instead of the hyperlink interpretation and the hyperlink does not work.
    When the same link is applied to a table, it works fine.
    Any suggestions are appreciated.
    Thanks,
    Sander

    Hi Praven,
    Thanks for your reply. However, the problem is not in creating a hyperlink in a cell. As I mentioned in the initial question, the hyperlink works perfectly when part of a table. It will show the other report with the dimension objects filtered as you would expect.
    The table holds three columns:
    - Shoporder
    - Operation
    - Count
    I have set the hyperlink on the operation dimension and when a row is clicked, the target report is opened for that operation and that shoporder.
    The problem is that this hyperlink functionality seems not available (or not working correctly) in a chart.
    Thanks,
    Sander

  • Can not edit data labels in old graph chart objects using Word 2010

    In Word 2010, Insert object "Microsoft Graph Chart", go to Chart Options and check an item in Data labels, such as "Series Name", "Category Name" or "Value". Click OK, then double-click on a data label to edit its
    settings, or right-click on a data label and select "Format Data Labels..."
    This makes Word to crash. The only way I can get out of it is by using the Task Manager to kill Word.
    This happens in Windows 7 and Windows 8. This does NOT not happen in Word 2007 nor Word 2013, so it seems specific to Word 2010. All our clients have the same problem, this does not seem related to a specific workstation configuration.
    The Microsoft Graph Chart are the old charts used within .doc files. I have an application still generating those types of files and need to edit data label settings manually before processing the files with my application.
    Also note that anytime you edit a .doc file in Word 2010 and you see "Compatibility Mode" in the title bar, the Insert / Chart option from the ribbon inserts an old type chart (same as if you use Insert / Object / Microsoft Graph Chart), not the
    new Word 2010 charts. You then have the same problem editing the data labels.
    The underlying Activex seems to be the Chart.Exe file, the one I have installed is 14.0.7012.1000. You can see the version by double-clicking the chart and then look in the Help / About menu.
    Any help will be greatly appreciated.

    As this is a configuration issue and not a programming issue I' moving your question to a more appropriate forum where you're more likely to find assistance.
    Cindy Meister, VSTO/Word MVP,
    my blog

Maybe you are looking for

  • Various Software Updates (Intel)" Can't be Installed (verification failed!)

    This is essentially a repost of a problem unsolved, but with a new wrinkle: When I first reported this two months ago, it was just happening on an Intel iMac. Now, someone else in the office just purchased a MacBook Pro, and from the SAME NETWORK, is

  • Can I display iPad on tv?

    I have an iPad 2. Bought a rocketfish cable to hook up the iPad to the tv. Plugged all 5 wires in plus the USP. I can hear the audio, but no video. Just want to watch Netflix and stuff on the tv. Any tips? iPad 2

  • Prompt on dock says update, but no internet.....?

    Occasionally, I see a prompt on my dock ( i-mac ).  It is a photoshop logo with a large X on it.  It also says: update.   When I click onto that ,  it tells me that I have no internet connection.  Obviously my network is always on. What does this mea

  • The recovey drive. It keeps trying to start but shows error and can not delet it.

    Photosmart D7460 wireless printer. is working fine. But can not turn off the the repair drive that was downloaded.

  • Scrolling within iTunes choppy

    Didn't really notice when this behavior started, but scrolling down iTunes is very choppy for some reason. I had minor issues when expanding thumbnails within Aperture for a while after I installed the last graphics update, so I don't know if they ar