Labels in SD without Packging

Hi,
I would like to have your advice about printing labels without delivery packaging.
the organization needs the labels to be presented in the VL74 screen and I can't find the trigger to print it without pack the delivery first.
I will be glad to have your advice as soon as possible
Best Regards,
Pazit Dalal
SD consultant

hi
Goto SE37,
BAPI_BILLINGDOC_CREATEMULTIPLE
Press F8.
Pass the values in BILLINGDATAIN table.
salesorg,DC,division, Document type, ORDBILLTYP is 'FX' . sold-to party, material,qty and other informaion.
Maintain pricing information in CONDITIONDATAIN table.
enter condition type and condition value.
E.g PR00 100,
Select Newline for second condition type. maintain another condition type and value.
Go back Execute it .
You will get document number in success table.

Similar Messages

How to have rotated axis labels in charts without embedding fonts?

Hi all,
I am trying to have slant/rotated axis labels in flex charts to avoid clutter in cases of large number of sample points. It was fairly easy to do this using 'labelRotation' method in AxisRenderer but this involved embedding fonts [ causes my swf to increase in size by atleast a 100KB which in my case is very high ]. My question is.. Can this be done without embedding the fonts? Maybe with the use of labelRenderer? Any alternatives that would solve the purpose without increase in swf size are also most appreciated as I ve been struggling with this for quiet a while.
Thanks a ton,
Siva

Please check LabVIEW\Examples\picture\demos.llb\polar plot demo.vi
But it has no zooming and cursors.
Maybe you can modify that example and use XY plot instead of picture control. I mean for each function plot on the picture, you generate another function to replace it and generate XY data pairs.

How to change field labels in CRM without changing original data structure

Hello, I wish I could change the label of the input-type fields that are visibile in the CRM Account search page.
The only way I have found so far is: go to the structure CRMT_BSP_SEAREQ_ACCOUNT
and change the short description of the component.
This is, anyway, very invasive, as I have to modify a SAP structure and I am asked an activation key.
I have gone through the PCUI but cannot find a way to change the labels, anybody has a hint?
At least, I would like to give the labels the same length so that the page is better organized, now all columns have different widths...

Sorry, I had not seen this previous answer
https://forums.sdn.sap.com/click.jspa?searchID=9822963&messageID=4781696
Very nice!!!

My Labels Print without spaces ?

I am printing avery labels that were produced by the "label assistant.
All good... except when I print the label items print without spaces.
Like This:
JamesHammil
123MainStreet
AlbuquerqueNM87111
Any Ideas how to fix this?

Duuuu I figured it out.
Sorry

No need label printout for 103 movement

Hi Experts
I have experinced some error while using 103 movement.Please below I have furnished details fo error.
User gets error when ever using 103 (Material post to block stock) movement, which is also queuing in the label print out without printing, when ever using 105 movement for label printout that time gives a problem with unprinted label print outs for 103 movement, user does not want label printout for the movement type 103. Now workaround is currently local help desk is deleting the unwanted printouts from queuing and taking the required printouts.
Please give your valuable resolution for the same.
Thanks & Regards
J.Jeyakumar

hi,
try using user exit for MIGO
MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
thanks

Problem Printing Labels on Zebra label printers

Hi Every one
(there may be old solution for my problem, if there is, point me
to that)
my environment is oracle 6, windows 2000. server is runnig on
windows NT.
I am generating labels using oracle reports 6 for an application
customised for pharmaceutical company. report has driver report
calls another label generator report. no matter from where i
print the report to zebra S400 label printer, my report builder
crashes. if i run the report from rep file in application, my
application crashes. if i save the report to a pdf file and
print it using acrobat reader, it prints perfectly. if i use any
other application like access, vb etc. they generate label and
print without any problems.
i have the latest windows 2k drivers for the printer. i also
have tried re-install oracle cleint on my pc. the result is
same. applications crash when print using oracle report to label
printer?
has any one come across such a problem? is there a solution for
it?
zebra label printers are pretty much a standard and are being
used in allmost all the client location that my deals with. and
they (printers) number in 1000's. in most of the cases labels
are generated using zpl language in ascii, but why cant oracle
reports print report generated labels to these printers?
zebra has no comments on this, but they demonstrate their
printer capabilities using all other windows based applications
and point back to oracle reports for the problem.
i appreciate any solution, lead, tip to overcome this problem.
thanks and regards
shiv(anand)
dcss, houston

hello,
i would strongly suggest, you consult the metalink knwoledge
base and seach for existing problems. if you can not find
anything, contact oracle support services.
regards,
the oracle reports team --pw

How to make grid without text etc., expand upon load of app?

hello,
i did this,
JPanel panInner = new JPanel();
panInner.setLayout(new GridLayout(5, 5, 10, 10));
then after that, i add 25 labels on each without any text.., the grid looks very small and will enlarge upon entering text.., i don't want that to happen, i want the grid boxes to have a constant size all through out regardless of the text's length.
also, how do i have a 'fixed size', seems all the component's size fitting to the size of the texts.,
many thanks! :)

Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

Find a component with his id ? (ex find a Label in a Panel with the Label's id)

Hello, I need to find a children component with his id (so without getchildat ou byname methods)
ex :
<mx:Panel id="panel1" x="10" y="10" title="PANEL 1" width="400" height="300">
<mx:Label id="label1" x="15" y="15" text="label 1 dans panel 1" />
<mx:Panel id="panel2" x="70" y="50" title="panel 2 ds panel 1" width="100" height="50">
<mx:Label id="label2" x="25" y="25" text="label 2 dans panel 2" />
</mx:Panel>
</mx:Panel>
with id=label2 or id=panel2 I would like have the Label or Panel, without having to look in children of children
because there is only one single id in application I think it's possible, but don't find how
think's in advance for your ideas !
Dave

hello atta707, think you for you help !
but I need it to find components I create with my methods createLabel and createPanel
> I have found this[id]
it work good for components who are first in application
but it doesn't find components who are created after
for example, with :
<mx:Panel id="firstpanel"></mx:Panel>
this[firstpanel] work
but if I create a new panel in the first panel :
newPanel = new Panel();
this[firstpanel].addChild(newPanel)
this[idNewPanel] doesn't work !
so it seems when you use addChild it add the component in screen and children tree
BUT not in this[id]
and if I try
this[idNewPanel]=newPanel it doesn't work
so I need a method to find NEW components by their id
or to oblige this[id] to register the new components created
any idea ? >

Unable to display x-axis labels

In the Query Designer, characteristics ZNAME is specified as the Rows and ZDAYS is specified as the Columns. Example data:
Name - Alfred, John, Michael, Peter
Days - 10, 20, 0, 5
However in the Analyzer, the ZNAME are represented as running numbers (1, 2, 3, 4) instead of names (Alfred, John, Michael, Peter) in x-axis of the chart. Go to Source data and under the Series tab, I notice that the Category (X) axis labels is not captured. How can i show the x-axis labels by default without making any changes in the Analyzer ?
Edited by: Ian Lim on Feb 4, 2009 8:02 AM
Edited by: Ian Lim on Feb 4, 2009 8:02 AM

Hi,
Is this required at WAD ? If you want labels in WAD , you must select the checkbox show labels by edit chart . Its not possible at query designer stage.
Regards
Pcrao.

Label Security API

Greetings
All the on-line documentation for Label Security talks only about the GUI admin tool. Is there a PL/SQL package that would allow me to programmatically manage label security?
I want to develop an Account Creation screen that I can give to my users so that they can assign people to predefined roles with particular configurations of labels, compartments, goups without them having to get their heads aound the concepts.
TIA, APC

Hello,
If you haven't installed or some component failed to install that means you won't be able to use it. You can login on dbconsole to verify what features installed by looking at feature usage. You can also launch installer and verify which of the component were isntalled by going to remove tab or even on feature selection on installation page.
Regards

Checkbox in front of formitem label

Hi,
    I use flex 3 to design a form, i want a check box before every label, i tried without setting label property in formitem but the component alignment is not good as below
is there a way to add check box before the label or is there anyother layout that will suit for this requirement. Please provide me a sample code if possible
thanks
prasad

Prasad,
Add label property to the checkbox.
checkout this below example:
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
    <mx:Form>
        <mx:FormItem label="Subscribe">
            <mx:CheckBox label="Subscribe?"
                click="emAddr.required=!emAddr.required;"/>
        </mx:FormItem>
        <mx:FormItem id="emAddr" label="E-mail Address">
            <mx:TextInput id="emailAddr"/>
        </mx:FormItem>
    </mx:Form>
</mx:Application>
For More info: http://livedocs.adobe.com/flex/3/html/help.html?content=layouts_08.html
-Shravan P.

Is there any way to assign colored labels to events?

Is there any way to assign colored labels to events without having to create numerous calendars?

You can use numactl to lock any process to a NUMA node, but that only helps if your machine really is NUMA (AMD Opteron servers are, Itanium systems often are).
You should be able to enumerate nodes using:
numactl -H
And lock the process to a node using for instance:
numactl cpubind=$node_num membind=$node_num java MyClass
It is hardware dependent how many CPUs and how much memory you have per node. A common number of CPUs is 1-4 sockets.
Regards -- Henrik

GLM - Spool management - Slow printing standard - High Volume Printing??

I've seen a couple OSS notes referencing performance on Spool management for GLM, but I need to ask about HVP.. I was told this was the only way to allow the printing of sequence or serial number processing to print quicker..
Here is my issue. We have used serial numbers symbols on our labels with the following configuration to allow the label to print in sequential order based on the number of labels needed.
Meaning if we have 10 labels to print, we use this serial number symbol to print 1 of 10, 2 of 10, 3 of 10, etc...
Here is the symbol code we have on our template.
@TD_LBLSRN(ID=02EHS_SERNO1) of @TD_SRNEND(ID=02EHS_SERNO1)
Now by doing this, it slows the printing of the label considerably. Without this, labels print 1 every 2 seconds or so, but with the serial number sequence, it prints 1 label every 20-30 second and we print thousand of labels at a time. So it takes a really long time.. The issue is the labels and the serial number sequence is being spooled up and basically printing a label after WWI process the 1 of 10, then processes 2 of 10, then etc...
How can we speed this up? I heard HVP, but this solution is extremely expensive.. Is there any other solution?

Hello Keith,
GLM replicates the static part of the label and adds after wards the sequence number to each generated page. This is needed; because GLM uses the MS Windows standard print technology which does not foresee optimized sequence numbering. The advantage is that it will work for all printer types with a MS Windows printer driver but the disadvantage is the increasing data volume and the longer processing times.
The HVP functionality is available for thermo transfer printers of Zebra, Pago, Tec or printers which can understand the ZPL printer language. The HVP is part of the GLM pre-defined service from SAP since January.
The HVP functionality will pass the sequence number parameters to a special printer driver which uses special functionality of the printer hardware to do the sequence numbering. The printer driver load the static part of the label to the printer first and send then only the sequence number as a dynamic part for each copy. So finally this will reduce the data volume nearly to one copy of your label.
I donu2019t think that there is really a good technical alternative to HVP at the moment but some MS Windows printer drivers have the possibility to send hardware commands in advance of a print job. This might be an option to initiate a sequence number counter on the printer hardware an doing the numbering in that way. I never tried it in this way but this is the only option without HVP I see at the moment.
Best regards
Michael Veit

Integrating barcode asset management and LR

I have discovered to my delight that you can integrate Lightroom and barcode based print asset management. This is a way to:
automate the printing of labels for images without any rekeying of information, and
automate the process of finding the image from which a print was made
Why do this? You may sell prints or just make them for your own pleasure. It is good practice to provide some labelling of prints so you (or the buyer) knows what they are looking at. It can be helpful to be able to quickly find the source image of a print. Of course you can just include the filename in the label and type it in to find the source image. But the labels produced look a bit messy with a sometimes arbitrary filename stuck in there. An option is to include a neat barcode on the label. You can then use your webcam to read the label and direclty insert the filename in the LR search field. Presto! Up pops the image from which the print was made.
Caveat: Apologies to Mac users, I have only worked this out on a PC. I'm sure there are substitutes for each of the things I've used.
What you need to do this [on a PC]:
Lightroom (LOL)
LR/Transporter (incredibly useful for many things)
Excel (optional but part of my workflow)
A way to print labels with barcodes. I use a cheap Brother label printer which comes with the P-Touch Editor software.
A webcam
Webcam barcode reader software. I use bcWebCam which is free
How I do it:
I'll sketch how I do it with the specific gear I have and then suggest how you may get by with other gear.
Simplest workflow:
Set up LR/Transporter to export a summary file from image exports that includes all the fields you may want on your label (including filename of course). Format for comma delimited a CSV file with a header line to define the exported fields. This is saved and reused as an export preset. Routlinely I can then select the images I am printing and export them to a dummy folder which I use for the purpose of transferring Image information.
I use my label printer software with a template that merges the CSV file data onto a label, with the filename printed as a QR barcode. I generally put one label directly on the print reverse and, if framed, another on the frame rear. With high quality art prints I only do the latter to avoid any possibility of problems of with the adhesive discolouring the paper obverse. Here's an example.
Having previously installed bcWebCam, if I need to find an image that needs a bit of a search (only likely if I've not worked on it recently), I load bcWebCam while LR is running, place my mouse cursor in the search field in the library view (having selected the root of my catalogue), and hold the print label in front of the web cam. Presto! bcWebCam inserts the filename in the search field and up pops the image in LR!
In reality, I use excel as an intermediary to read the LR/Transporter data and reformat some items. One reason is the GPS information exported by LR/Transporter has some weird characters in it and they need to be cleaned out. Characters with accents or umlauts also need some special treatment. Excel also lets me define how many of each label I want printed... The label printer software reads the excel file as a database and allows printing of the required number of labels.
If you are interested in this solution you are likely to have tens or hundreds of thousands of images in which case camera generated filenames will not be unique. I add a month and year in import and conversion to DNG into LR to ensure filenames are unique. There are a range of other work-arounds that may suit your workflow better. But remember, you need something that LR will find in a single search. It may be you create a unique identifier in a EXIF or IPTC field - this will work too... Some smart bunny may point out to me there is some foolproof automatic unique identifier for each image built into LR which can be accessed and exported but I am not aware of it. I guess image creation time (to the second) comes pretty close but I cannot see how to search on this from a search field entry...
Where you may need to find some workarounds:
If you are on a PC, the one thing that is not available on the net is the barcode label printer. In the past I used to print labels on multi-label sheets with a laser printer. It's not obvious to me how to translate the unique image identifier into a barcode for this approach but I'm sure there will be one out there. But I came to the conclusion that a dedicated "on demand" label printer would save a huge amount of messing around. I think the Brother model I use is about US$79 which doesn't exactly break any bank. And the continuous paper roll I use means labels end up about 2.5 cents a pop... What makes this or even the more capable models (with auto-cutters) such a great deal is the P-touch sofware which does do all the linking of database to label and info field to barcode. This is worth the price alone I reckon. There are other free and for-fee webcam barcode readers out there too; the one I've noted works for me...
This may sound pretty complex to set up. But the reality is, once export, database and print templates are in place, it's all automatic.

Hi,
Great use of LR/Transporter
The strange characters result from the fact that LR/Transporter outputs files with a UTF-8 encoding. You need to be able to read that so see them. Most applications can read UTF-8 nowadays.
Tim

Why is Acrobat Pro XI so bad ?

I have just finished creating my first PDF form using Acrobat Pro XI.
Man oh man is this software bad!
Are we talking about version 1 or version ELEVEN ?!?!?!
Some of my gripes:
- No way too select grid size
- Apps does not take into account Windows' default units (I use the app in French so it defualts to millimeters while my system is in inches)
- I can not align text to fields because this is two different modules !!!
- Text labels "auto group" without my permission (where the hell do I disable this????)
- There is no way to add boxes or lines
- Some text gets garbled over time - yes, some characters text in the the text fields go missing after a while !!!
- The form fields can only be boxed and not underlined
- Adding radio buttons is a like a work around
- The escape key does not exit the field properties dialog (c'mon guys)
- I have to keep two versions of my PDF, one source one for distributing with fields activated
- And I have not talked about the useles app called Adobe FormsCentral (what is the word in English for "worst than worst" ?)
Come on Adobe, you guys make great software that I use everyday (CS6 and LR) but You can't make Acrobatr right even after version ELEVEN ?!?!?!?
Max

> - No way too select grid size
The above is controlled by using the application preferences, <Ctrl> + "K" under "Units & Guide Lines" and the end of the category list.
> - Apps does not take into account Windows' default units (I use the app in French so it defaults to millimeters while my system is in inches)
The above is settable through the application preferences under "Units & Guidelines".
> - The form fields can only be boxed and not underlined
There is a property for each field, and one can set the "Appearance" of the field to include the the color, type, and size of the border. The types of "Line Style" for the field are "Solid, Dashed, Beveled, Dashed, and Underlined". The thickness can be "Thin, Medium, or Thick". You can also select the color.
Since this is User2User site we can only provide some guidance.
You might want to post using Adobe's Feature Request/Bug Report Form.
It is also possible to be invited to be an Adobe product evaluator, but rants might not help you get invited.

Labels in SD without Packging

Similar Messages

Maybe you are looking for