Labels not printing

hi Friends,
kindly guide me as i am having problem using transaction MIGO.
when i do goods receipt in transaction, i flag the check box (Print via output control)beside the individual slip then i save it. but when i check the material documnet number created, the check box is not flagged anymore. this cause the labels not to be printed. please help. advice what configuration am i missing and what transaction should i o to set up this.
thank so much!

Hi Allan,
You can maintain Output Control settings for printing in OPK8. Please maintain the necessary settings like settings for Output Device, Spool Parameters for user.
I think you are unable to get spool generated so you are unable to print while GR.
Pls. try with above settings and check.
Reward if useful.
Regards,
Tejas

Similar Messages

CR2008 SP5 Labels not printing correctly

Hi,
I've got an issue were labels are not printing correctly to a Zebra printer. I'm using Crystal Reports 2008 SP5. The problem is the width is 10cm and the length is 7.5cm but Crystal is automatically changing this to landscape orientation which doesn't print correctly then. From reading older threads, a lot of people have had similar issue but according to this thread - CR 2008 V 12.3.0.601 Labels will not print correctly the issue should be resolved in SP5 but it's still not printing out in the correct orientation despite the print preview looking perfect.
I've tried checking the No Printer option and the Dissociate Formatting Page Size and Printer Paper Size option and pretty much every other option I've seen mentioned but I still cannot get the label to print in the correct orientation. Has anyone succesfully got this working?
Thanks

Hi Gary
What is the version reported when in the designer you go to the Help menu and then About... ?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Labels not printing right

I have an HP Officejet 5610xi All-in-One printer. I have never had any trouble with it. I don't think I have ever printed labels with it, though. I purchased the Avery Clear easy peel labels 8662 and down loaded the template 5162 that it told me to use. I am using Word 2003 to run this template. I designed the labels and did a test print on a plain sheet of paper - they came out perfect. Then I tried to print them on the labels - they came out way too high and ruined a whole sheet of labels. So I tried again with plain paper - it was perfect. I then put the label page back in, only this time to print on the back side of the label page - it came out perfect. So I hoped that the first ruined page was a fluke and inserted another label page - again too high! I contacted Avery and they tried to help me adjust the templates top margin - it didn't help, it still printed at the same height. Avery told me the error was in the way my printer was grabbing the labels. I need HELP! I am trying to print return labels for my wedding invitations and they have to go out this week! I still have the outgoing address labels to design and print.
Thank you for your help!!!

Hello stefer159
Check if this link helps...
Cheers!
Tek_Blogger
Click on the 'Blue Kudos' Button to say 'Thanks !'
I am an HP employee. When I offer advice on HP Products, I'm speaking for myself and not for HP.

Laserrjet 1600 Word 2007 Labels not printing

I've had this problem for a long time. I want to print labels using my Laserjet 1600 with Word 2007. It won't feed the paper stock no matter what I try. It wants to feed from a tray that apparently does not exist. I've tried manual feeding and tray feeding. I also have the problem with photo paper.
Does anyone have experience with this and how to properly set the software to do this job ? Thanks.

MichaelKazlow has already given some pretty good advice, but let me add to that...
Equation Editor 3. Your statement that "MS no longer uses their much better Equation 3.0" is only partially true. Microsoft Equation 3.0 is still included with Microsoft Office. It's in Word 2007, which it seems to be the version you're using, as well as Office 2010 and Office 2013 (as well as the installed versions of Office 365 -- not the web apps versions). You get to MSEE3 the same way you did in earlier versions of Office -- Insert > Object.
Embedding fonts. This is a good idea, but really more necessary for MathType than for Equation Editor. MSEE3 uses the MT Extra font, as does MathType, but MathType's version is much more complete. Thus, some symbols you create with MathType may not appear properly if 1) your recipient does not have the MathType version of MT Extra, or 2) you don't embed the font.
Saving as PDF. This capability is better in Word 2010 and 2013 than in Word 2007, and embeds fonts by default. It's a Save As option from Word; you don't need Acrobat. Acrobat is better, but expensive. If you don't have Acrobat, and if Word's Save As PDF feature isn't working as well as you'd like, doPDF is a free option that works pretty well.

Labels not printing correctly

I am printing with an HP OfficeJet 6500 on an iMac 27" Quad.
These are product labels that will eventually get placed on glass jam jars.
I purchased Labels # WRV5-3R_5923 from labelsbythesheet.com.
They provided me with a Microsoft Word template.
The actual printing is really beautiful. The labels respond with great clarity on my inkjet printer, and I am now testing them in the refrigerator. (I am making labels for jars of jam)
The problem is getting things aligned. The bottom row boxes show up perfectly in the preview. But when I go to print, the last 1/4" of the bottom boxes are clipped off, so the bottom labels don't print correctly.
Then the labels seem to "move around" across the page. The first label is correct, but as one goes across the page, the border moves from left to right. The left border is about 1/4" past the label. The fifth cell on the right is about 1/8" inch before the label.
Also vertically, the top row prints 1/8" below the label. The bottom row prints 1/4" above the label.
On my printer, I have disabled all the "align and center" controls, the "fit to page" control, the "scaling" and "bounding box". So in the controls it appears the printer software is doing nothing to the original document.

Hi garrymtp,
I would like to help you with printing labels. The issue you have described sounds like it a result of print margins.
The document margins must match (or exceed) these margin settings in the portrait orientation.
Media
1. Left (LM)
2. Right (RM)
3. Top (TM)
4. Bottom (BM)*
U.S. Letter
U.S. Legal
A4 210 x 297 mm (8.3 x 11.7 inches)
U.S. Statement
210 x 297 mm (8.5 x 13.0 inches
Customized media
Photo media
B5 (JIS): 182 x 257 mm (7.17 x 10.12 inches)
A5: 148 x 210 mm; (5.8 x 8.3 inches)
Cards
3.0 mm (0.125 inch)
3.0 mm (0.125 inch)
3.0 mm (0.125 inch)
3.0 mm (0.125 inch)
279 x 356 mm (11 x 14 inches)
310 x 310 mm (12 x 12 inches)
B4 (JIS): 257 x 364 mm (10.2 x 14.3 inches)
Super B: 330 x 483 mm (13.0 x 19.0 inches)
A3: 297 x 420 mm (11.7 x 16.5 inches)
A3+: 330 x 483 mm (13.0 x 19.0 inches)
5.0 mm (0.197 inch)
5.0 mm (0.197 inch)
20.0 mm (0.788 inch)
20.0 mm (0.788 inch)
Envelopes
3.0 mm (0.125 inch)
3.0 mm (0.125 inch)
3.0 mm (0.125 inch)
14.3 mm (0.563 inch)
Are you able to modify the margins?
How to Change the Margins in a Microsoft Word Document for Mac
Keep me posted
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I just updated my Ipad 2 last night with iOS 7.04 now I can't print shipping labels from Paypal. I downloaded a different browser, Dolphin, per Paypal's suggestion. Still can not print. It says it has lost connection with the server.help!.

Hello! I updated my Ipad now I can not print USPS labels from Paypal. I used my boss' Ipad not updated and worked fine. I am dependent on my Ipad to print these labels for me. I can print anything else I want, like email or packing slips. Any thoughts? I would go back to the previous version if anyone knows how to do that.

Hello Sapo11,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Can not print shipping labels on FedEx with Firefox 4

I print shipping labels from FedEx's website using their ship manager online. Now with Firefox 4 I can not get shipping labels to print with any of my printers. I had to use IE to get it to print a label. I spent almost an hour with FedEx tech support and could not get it to work until I tried it with IE. I have had no problems with previous versions of Firefox.

If you use Quickbooks software, you could try the fix mentioned on the [http://community.intuit.com/posts/cannot-print-shipping-labels-from-ups-or-fedex-shipping-applet Intuit forum] It's the 4th post down.
The Fedex shipping label app was written by [http://quickbooks.intuit.com/product/add_ons/shipping_manager.jsp Quickbooks], so it might work.
Alternatively, maybe one of the Add-ons listed here will work: [https://addons.mozilla.org/en-US/firefox/search/?q=print&cat=all&x=0&y=0 Print Add-ons]

My photosmart D5360 is not printing label to cd

My photosmart D5360 is not printing label to cd, please reveal pos causes. printing to main tray is no problem

Did you ever get an answer to this? My Photosmart is doing the same.
Printing on to paper - no problem.
But on to a Disc - It Loads the disc and goes through the print cycle, but nothing gets printed.

USPS will not print labels using Safari

I am forced to use Internet Explorer to print USPS labels. Safari will not open up Adobe and bring up labels for printing. Explorer brings up the label and allows it to print. Any solution to this problem out there?

Hello JG:
Welcome to Apple discussions.
That was a problem sometime ago, but the USPS fixed it. I routinely print USPS Priority Mail labels from their web site using Safari. The problem is someplace else.
Do you have the latest version of Adobe PDF reader?
Try resetting Safari and trashing the preference file (com.apple.safari.plist) and then restarting.
Barry

Printing labels (not JLabels) :-)

Hey guys! This doesn't quite belong in this forum, but it is definitely related.
What I'm doing now is creating a simple .txt document in the format:
NAME DETAILS
ADDRESS
DATE
NAME DETAILS
ADDRESS
DATE
etc.... The file will just be full of this. Same format, different data, that I need to print. The thing is, I'm printing this document to a set of labels. These labels are only about 10cm x 7cm (width x height). So, they would be less width than a normal A4 sheet, and you can fit around 3 per page. The problem I'm having is, if there isn't a multiple of 3 labels to print in the .txt document, then the printer still prints out the whole page.
An example of the printer and labels is here: http://www.imagestation.com/picture/sraid183/p815d0b1ce7f2a3b8f126b099cea04d0a/f2a9ff45.jpg
You know how when you print something, the printer prints in pages. Well, if I only have to print one label, it prints a whole page, and since I don't use A4 paper, they are labels, 1 label comes out printed on, and the other 2 are empty...so I have to readjust them after each print.
Well, is there a way to tell the printer to stop after it's printed the last label? Or does this have to do with printer driver programming?
Thanks.
...DJVege...

So, not possible????
...DJVege...

HT4085 Can not print international shipping labels on eBay does anyone know why no problem with the us labels

I recently purchased the new I pad and I can not print the international labels.I have no problem with the U.S. labels or my air printing.can anyone help me with this thank you in advance

What make and model printer? How does printing the international labels fail?

Not printing the label in the zebra printer for 4 X 7 inch size

Dear all,
Iam trying to print the barcode in the label of size 4.00 X 7.00 inche in smartforms , for which i have created a page format in SPAD with 4 x 7 inch and specified the same in Form interface and specified 4.00 x 6.00 inche in the MainWindow of smarforms,
im getting the print preview ,but it is not printing it in the printer, i checked with the zebra printer set up also and in the printing preferences i gave it as user defined.
but when i tried with page size of 4.00 x 6.00 , it is printing without any problem. but my requirement i need to print that in 4.00 x 7.00.
Can anybody guide me how to resolve this.
thanks in advance. Points assured.

sorted out by setting the SPAD - Device types
format, just added the zxxx format to this and now it is working

Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS. Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes. The balance of the mailing label do print, just not the bar code. It may be my imagination, by I believe it used to print thebar codes.

Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Not printing...zebra printer

Hi All
I am using zebra printer TLP 2844, all the fonts are feeded in the printer.
I am printing a simple text.. but its not printing anything.
REPORT ZTEST2 .
data: x-prin(4) value 'LOCL'.
data:
t1(80) value 'A100,100,0,d,1,1,N,"Material Number"'.
do 1 times.
new-page print on
      destination x-prin
      copies '1'
      immediately 'X'
      keep in spool 'X'
      no dialog.
write: / 'O'.
write: / 'Q1217,1'.
write: / 'q811'.
write: / 'S2'.
write: / 'D6'.
write: / 'ZB'.
write: / 'JF'.
write: / 'N'.
write: / t1.
enddo.
any idea what can be the reason
cheers
AJ

Hi Pavan
As the SAP vesion is 4.6c...and they have no support package for printing using samrtforms.
but other reports, which prints the labels in the warehouse are printing the barcode labels....
and I am using the same printer........so definetly it should print.
but I dont know what mistake I am doing........
AJ

PrintDataGrid's DataGridColumn - Embedded image not printing when you use TextFlow in the item rende

I'm printing a datagrid using something like this...
<mx:PrintDataGrid
id="printDataGrid"
width="100%"
height="100%"
showHeaders="false"
borderVisible="false"
horizontalGridLines="false"
variableRowHeight="true"
dataProvider="{titles}"
>
<mx:columns>
   <mx:DataGridColumn
    itemRenderer="renderer.TitlePrintRenderer"
    />
</mx:columns>
</mx:PrintDataGrid>
TitlePrintRenderer.mxml has s:RichText component. I use RichText's textFlow property to render the text. The approach is working fine except that if the textFlow has embedded images (<img source=... />), the images are not printed!
Is this a bug? Is it a limitation? Has anyone come across this issue?
I'm using Flex SDK 4.5.1

After struggling for 4+ days on using timer / events for printing PrintDataGrid with embedded images in RichText's textFlow, I tried your other suggestion... to convert <img> tags to InlineGraphicElement and give it Bitmap from image loaded from a .gif file. The approach works but the printout skips images in a few rows!
I've this test case in which, every time I print, it skips printing image in the second row! I also implemented this approach in a more complex test case and depending on the total number of rows, it would skip printing image in different number of rows. I'm suspecting that even if you construct InlineGraphicElement from bitmap loaded from an image, PrintDataGrid's renderer still skips printing image intermittently.
I would very much appreciate it if you could create small project from my following code and verify this behavior. I'm at my wit's end in getting this printing to work.
PrintImagesTest.mxml
=================
<?xml version="1.0" encoding="utf-8"?>
<s:Application
    xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    minWidth="955" minHeight="600"
    initialize="initData();"
    viewSourceURL="srcview/index.html"
    >
    <s:layout>
        <s:VerticalLayout
            paddingLeft="20" paddingRight="20"
            paddingTop="20" paddingBottom="20"
            />
    </s:layout>
    <mx:Button
        label="Print"
        click="printClickHandler();"
        />
    <fx:Script>
        <![CDATA[
            import flash.utils.setTimeout;
            import flashx.textLayout.elements.InlineGraphicElement;
            import flashx.textLayout.elements.ParagraphElement;
            import flashx.textLayout.elements.SpanElement;
            import flashx.textLayout.elements.TextFlow;
            import mx.collections.ArrayCollection;
            import mx.printing.*;
            import mx.utils.OnDemandEventDispatcher;
            public var contentData:ArrayCollection;
            private var embeddedImages:ArrayCollection;
            private var numberOfImagesLoaded:int;
            public var printJob:FlexPrintJob;
            public var thePrintView:FormPrintView;
            public var lastPage:Boolean;
            private var textFlowNS:Namespace = new Namespace("http://ns.adobe.com/textLayout/2008");
            public function initData():void {
                contentData = new ArrayCollection();
                var page:int = 0;
                for (var z:int=0; z<20; z++)    {
                    var content:Object = new Object();
                    content.srNo = z+1;
                    content.contentText =
                    "<TextFlow whiteSpaceCollapse='preserve' xmlns='http://ns.adobe.com/textLayout/2008'>" +
                    "<span>some text</span>" +
                    "<img width='53' height='49' source='assets/images/formula.gif'/>" +
                    "</TextFlow>";
                    contentData.addItem(content);
            public function printClickHandler():void {
                convertToTextFlow();
            private function convertToTextFlow():void {
                embeddedImages = new ArrayCollection();
                numberOfImagesLoaded = 0;
                for each (var contentElement:Object in contentData) {
                    extractImageInfo(contentElement.contentText);
                if (embeddedImages.length > 0) {
                    loadImage(embeddedImages.getItemAt(0).source);
                } else {
                    printData();
            private function extractImageInfo(contentText:String):void {
                var textXml:XML = new XML(contentText);
                var imageList:XMLList = textXml.textFlowNS::img;
                for each (var img:XML in imageList) {
                    var embeddedImage:Object = new Object();
                    embeddedImage.source = String(img.@source);
                    embeddedImage.width = parseInt(img.@width);
                    embeddedImage.height = parseInt(img.@height);
                    embeddedImages.addItem(embeddedImage);
            private function loadImage(imageSource:String):void {
                var loader:Loader = new Loader();
                var urlRequest:URLRequest = new URLRequest(imageSource);
                loader.load(urlRequest);
                loader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded);
            private function imageLoaded(e:Event):void {
                embeddedImages.getItemAt(numberOfImagesLoaded).bitmap = (Bitmap)(e.target.content);
                embeddedImages.getItemAt(numberOfImagesLoaded).width = ((Bitmap)(e.target.content)).width;
                embeddedImages.getItemAt(numberOfImagesLoaded).height = ((Bitmap)(e.target.content)).height;
                ++numberOfImagesLoaded;
                if (numberOfImagesLoaded < embeddedImages.length) {
                    loadImage(embeddedImages.getItemAt(numberOfImagesLoaded).source);
                } else {
                    // all the images have been loaded... convert to textflow
                    buildContent();
                    printData();
            private function buildContent():void {
                var contentIndex:int = 0;
                for each (var contentElement:Object in contentData) {
                    if (hasImage(contentElement.contentText)) {
                        buildTextFlow(contentElement, contentIndex);
                        ++contentIndex;
            private function buildTextFlow(content:Object, contentIndex:int):void {
                var textXml:XML = new XML(content.contentText);
                var p:ParagraphElement = new ParagraphElement();
                for each(var child:XML in textXml.children()) {
                    switch (child.localName()) {
                        case "span":
                            var span:SpanElement;
                            span = new SpanElement();
                            span.text = child;
                            span.fontSize = 10;
                            p.addChild(span);
                            break;
                        case "img":
                            var image:InlineGraphicElement;
                            image = new InlineGraphicElement();
                            image.source = embeddedImages.getItemAt(contentIndex).bitmap;
                            image.width = embeddedImages.getItemAt(contentIndex).width;
                            image.height = embeddedImages.getItemAt(contentIndex).height;
                            p.addChild(image);
                            break;
                content.textFlow = new TextFlow();
                content.textFlow.addChild(p);
            private function hasImage(contentText:String):Boolean {
                var textXml:XML = new XML(contentText);
                var imageList:XMLList = textXml.textFlowNS::img;
                if (imageList.length() > 0) {
                    return true;
                } else {
                    return false;
            private function printData():void {
                printJob = new FlexPrintJob();
                lastPage = false;
                if (printJob.start()) {
                    thePrintView = new FormPrintView();
                    addElement(thePrintView);
                    thePrintView.width=printJob.pageWidth;
                    thePrintView.height=printJob.pageHeight;
                    thePrintView.printDataGrid.dataProvider = contentData;
                    thePrintView.showPage("single");
                    if(!thePrintView.printDataGrid.validNextPage) {
                        printJob.addObject(thePrintView);
                    } else {
                        thePrintView.showPage("first");
                        printJob.addObject(thePrintView);
                        while (true) {
                            thePrintView.printDataGrid.nextPage();
                            thePrintView.showPage("last");
                            if(!thePrintView.printDataGrid.validNextPage) {
                                printJob.addObject(thePrintView);
                                break;
                            } else {
                                thePrintView.showPage("middle");
                                printJob.addObject(thePrintView);
                    removeElement(thePrintView);
                printJob.send();
        ]]>
    </fx:Script>
</s:Application>
FormPrintView.mxml
===============
<?xml version="1.0"?>
<mx:VBox
    xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    xmlns:MyComp="myComponents.*"
    backgroundColor="#FFFFFF"
    paddingTop="50" paddingBottom="50" paddingLeft="50"
    >
    <fx:Script>
        <![CDATA[
            import mx.core.*
                public function showPage(pageType:String):void {
                    validateNow();
        ]]>
    </fx:Script>
    <mx:PrintDataGrid
        id="printDataGrid"
        width="60%"
        height="100%"
        showHeaders="false"
        borderVisible="false"
        horizontalGridLines="false"
        variableRowHeight="true"
        >
        <mx:columns>
            <mx:DataGridColumn
                itemRenderer="MyPrintRenderer"
                />
        </mx:columns>
    </mx:PrintDataGrid>
</mx:VBox>
MyPrintRenderer.mxml
=================
<?xml version="1.0" encoding="utf-8"?>
<s:MXDataGridItemRenderer
    xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    xmlns:bslns="com.knownomy.bsl.view.component.*"
    >
    <s:layout>
        <s:VerticalLayout
            paddingLeft="5"
            paddingRight="5"
            paddingTop="3"
            paddingBottom="3"
            gap="5"
            horizontalAlign="left"
            clipAndEnableScrolling="true"
            />
    </s:layout>
    <fx:Declarations>
    </fx:Declarations>
    <s:HGroup
        width="100%"
        gap="5"
        verticalAlign="middle"
        >
        <s:Label
            text="{data.srNo}"
            color="0x000000"
            fontFamily="Verdana"
            fontSize="10"
            />
        <s:RichText
            id="title"
            width="700"
            textFlow="{myTextFlow}"
            color="0x000000"
            fontFamily="Verdana"
            fontSize="10"
            />
    </s:HGroup>
    <fx:Metadata>
    </fx:Metadata>
    <s:states>
        <s:State name="normal" />
        <s:State name="hovered" />
        <s:State name="selected" />
    </s:states>
    <fx:Script>
        <![CDATA[
            import flashx.textLayout.elements.TextFlow;
            [Bindable]
            private var myTextFlow:TextFlow;
            override public function set data(value:Object) : void {
                if (value != null) {
                    super.data = value;
                    myTextFlow = data.textFlow;
        ]]>
    </fx:Script>
</s:MXDataGridItemRenderer>

Labels not printing

Similar Messages

Maybe you are looking for