Labels on version cue folders

There is no, what I can find, way to label folders in a Version cue Project. This would be very useful when working on many projects on the same time.
Andreas TS

If I had one feature request for Bridge, it would be to have the ability to label folders like you can in the Apple Finder windows.

Similar Messages

Cannot "Find" in Version Cue Folders

This is probably a Version Cue issue rather than Bridge, but suddenly, pressing Ctrl+F to Find files while viewing a Vc folder in Bridge results in a brief flash of the Find Dialog which immediately disappears. This started happening on all three of our computers simultaneously.
On all three computers in Bridge, Ctrl+F (or menu Edit => Find) properly displays the Find Dialog when viewing LOCAL files. It only does the disappearing act while viewing Vc folders.
I've deleted Bridge pref's. Deleted cache. Reset to factory default UI. The problem persists. Has anyone else had this problem? More importantly to me, does anyone have a solution?
(We haven't forgotten how to use find. We use it all the time [or used to] with "Lock Owner=Sven-or-whomever" to see at a glance who has which files checked out.)

FMw Portal, Forms, Reports, Discoverer 11.1.1.2 can be downloaded from Edelivery
http://edelivery.oracle.com

Why cant I label folders on the bridge that are located on Version Cue Server

Can someone tell me why I cannot label or rate folders that I can see through bridge but the actual folders are on a version cue server.
I can label each individual image or indesign file inside the folder but I cant label the folder itself or give it a rating.
Any ideas?

Welcome to the Apple Community.
Have you updated Pages on both the computer and mobile device.

Bridge CS3 Version Cue Folder ICONS Incorrect (Windows 7)

Hello,
After updating to Windows 7 Premium 64-bit, the folder icons that appear in Bridge CS3 when browsing a Version Cue Server appear as little hard-drives with a windows icon. (We use Bridge CS3 to avoid using the notorious "Adobe Drive CS4".)
We could live with these new icons and pretend that they're folders, but does anyone know of a hack or the registry location to flip these icons back to a folder icon?
Thanks,
JP

Hi Curt,
I just tried it and it didn't work. My issue isn't with the Adobe icons or thumbnails of the actual files, just with the icons that are shown for the sub-folders.
thanks,
JP

CS3 Version Cue as a sync tool?

Has anyone tried saving a Lightroom library to a VC "Lightroom" project? Any idea if using this approach would work as a way to synch a library & all its related folders/files easily between a desktop/laptop?
Thinking of giving it a whirl, but want to see if anyone has tried this yet.

You should see Version Cue under menu Edit => Preferences => and then select the General category. Version Cue should be the top left checkbox in Favorite Items at the bottom of the General category.
If you don't see Version Cue listed there, start the Version Cue server, and then start Bridge and try the above again. An easy way to start the server (provided that it has been started before, and is thus installed as a service) is to type the following at the Windows Command prompt:
net start "Adobe Version Cue CS3"
NOTE: You must include the quotes as shown immediately above.

Version Cue CS3 Change Default Local File Location

Hi All
I've done a bit of searching around and can't find an answer to this.
We have a bit of a Hybrid network which involves roaming profiles / TS profiles and all manner of stuff I have not yet found. The upshot of this is that profile size affects all manner of things.
Vesion Cue CS3 places local files into your user folders (and thereore your profile) by default.
Is there a way to change the default location of these files? I dont need them on a network share, the local disc is fine but just not in 'my documents'.
I am aware I can do it on a project by project basis, but as I deal in hundreds of projects this is impractical. That is to say I need to have the local files end up in the right place when I first sync.
Thanks Very Much for your help
Colin

I'm sorry Curt,
I don't understand your point.
CS3 does, in fact have Version Cue, and does put files in certain places. So I don't follow what you are getting at.

CS2 Version Cue: lost work space. (???)

Safari was crashing and error was wrong flash player plug in. SO...
I reinstalled flash player, then doing some things with the software apps and did a hard disk test, I did 'something' wrong. My computer crashed and when I restarted it, I had a totally different screen configuration. It was like starting from scratch. Lost a lot of stuff.
Safari browser bookmarks and bookmarks bar was gone, all folders in Mac Mail gone, even messages. It's like everything was wiped clean. I do have the information on my hard drive and trying to restore things, BUT... Now...
Safari crashes and gives me error message about needing Version Cue CS2 work space to run. I don't know what this means.
I must have thrown something out that had the work space with it? I was being so careful what unneeded excess stuff I tossed.
Went to Version Cue console.log this morning and this is what it says:
Mac OS X Version 10.4.11 (Build 8S165)
2013-11-16 11:01:10 -0800
Nov 16 11:01:11 Macintosh mDNSResponder: Adding browse domain local.
2013-11-16 11:01:11.797 SystemUIServer[86] lang is:en
2013-11-16 11:02:14 : VCStatus can not run without an installed Version Cue CS2 workspace.
2013-11-16 11:09:37.818 Adobe Installer[236]: DebugAssert: AdobeInstaller: removedLockFile == YES [:0]
2013-11-16 11:09:37.823 Adobe Installer[236] bootstrap
2013-11-16 11:10:03.006 Adobe Installer[236] copyApp status 0
2013-11-16 11:26:04 : VCStatus can not run without an installed Version Cue CS2 workspace.
I can't reinstall just Version Cue, but I can uninstall it.
From what I understand, and that's not much being I'm not computer literate, CS2 needs Version Cue? Even though I had it turned off? (me thinks)
Can I uninstall Version Cue and still use all my other software?
I've had CS3 on my bookshelf for years. Never installed it because I wasn't sure how without messing other things up. Not sure what I would need to back up, etc.
Does CS3 have Version Cue? Would uninstalling CS2 and installing CS3 fix things?
My Processor is PowerPC, not Intel.
I am so frustrated and don't know what to do. Can anyone help me out here as to what I can do to make Safari happy?
Thanks!
PJ

No bites yet. Okay.
Simply put...
Can the rest of CS2 and Safari run without Version Cue if I uninstall it? Yes or No.
Does CS3 have Version Cue? Yes or No.
If I uninstall CS2 and install CS3, will Safari be happy?
I'm getting myself into a mess here without help cause I'm frustrated. Really need some help.

Bridge & Version Cue

Hi,
i want to script some actions for the adobe bridge connected to our version cue server.
My first try was to create some folders. I`m only able to create the folders locally on the host with the "new Folder" method.
Any ideas?

To be more concrete we want to script typical actions done by
users via adobe bridge for automatic testing.
But instead of using folders on the local file system we want the
actions to operate on a version cue server.
So we would like to
- create/delete projects
- create/delete folders
- import and operate on files
We are able to write javascript (extendscript) scripts to browse the version cue hierarchy but
couldn't find any functions to script the above.
Did we miss something?
We have the impression that we have to execute the folder/file operations on the local copy
first and have to synchronize before and after our operations but we could not find any hints
in the bridge javascript documentation.
Man thanks in advance

Version Cue CS3 and PSE 4 with Adobe Bridge

will Version Cue on CS3 work with PSE4 and Adobe Bridge and if possible, please direct me to "how to set it up." Desperate to exchange .psd files with another user in another town.

I have no answers to Jon's questions - Iam interested in the answers, too!
... and I have another question, which might fit into this topic:
I own CS 4 (DP & PP) for Mac and want to install the version cue server on a PC(-Server).
Do I really have to buy a PC-Version of the suite to get that done?
The Tutorial says its possible and legal to install the version cue server on a different computer, which is quite logical.
But does it really need to be the same OS? I searched all the DVD's but did not find any-PC-thing at all ...
Thanks in advance for any (reasonable) answer(s).

How do I fix this Version Cue error

I recently upgraded my Vista Machine to Windows 7. Before the upgrade I deactivated and uninstalled my Adobe Creative Suite software. After the Windows 7 upgrade I reinstalled both CS2 Premium and CS4 Design Premium. It said there was a error during install that regarding Flash and that some of it's components might not work properly and to try the installion again. I did but I am not to concerned with Flash since I don't use it. My problem is that Illustrator and Photoshop don't work. I get the following error messages when I try to open a file then the program shuts down.
Illustrator.exe - Fatal application exit
The specified module could not be found. C:\Program Files (x86)\Common FIles\Adobe\Adobe Version Cue CS4\Client\4.0.1\Version Cue.DLL
Photoshop
Error
The Specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.1\Version Cue.DLL
How can this be fixed?
Thanks
Lee

I found the fix from a previous post regarding this issue. It is detailed below.
Hi Gang,
I was having the same problem as you all. I tried all the dll download sites that said they had the file I needed and all I had to do was to "unzip it and install it into the system directory", and of course, none of them worked. And that was while and after I waded through all the registry scanner stuff that came up on my "VersionCue.DLL error" search.
Anyway, to make a long story short, I simply copied the same file that is in:
C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.0\
to
C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.1\
Actually, I copied all of the files, not including the Dictionaries directory,
VersionCue.dll
VersionCueSDK.dll
VersionCueUI.dll
ExtendScript.dll
that were not in the 4.0.1 directory.
Now, I ended up with these 5 files,
VersionCue.dll
VersionCueSDK.dll
VersionCueUI.dll
ExtendScript.dll
ScCore.dll
and 1 directory, Dictionaries.
Now all is back to normal, for me at least. I hope this can help others, as well.
Stone
DomainMasters.NET

Version Cue CS3 not working. Photoshop not opening.

Hello,
I have just installed Adobe Creative Suite 3 Design Standard on my new MacBook Pro. I have activated it. However when i start Version Cue CS3 and check for updates i get the message "No Internet connection. Please check your Internet settings and /or firewall. Waiting for connection...". I have turned off my firewall and the antivirus program and I still cannot get it to work.
I also cannot start Photoshop CS3. When I open the application a blank window titled "Adobe Design Suit Standard CS3" appears as well as Photoshop toolbars which I cannot select. All the options on the toolbar is greyed out and I cannot select any of them. I have to force quit the application.
What am I doing wrong?
Any help is much appreciated.
Thank you.

This forum is for Premiere Pro... you might ask in forums for those products
If you go to the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the Adobe product(s) you use
When you find a correct forum, below is the KIND of information you need to provide
-PPro Information FAQ http://forums.adobe.com/message/4200840
-Premiere Elements FAQ http://forums.adobe.com/thread/1042180

Version Cue CS4 Missing, Fatal Error!!! (Mac OS)

I bought the PS CS4 for OSX alone, without the suite. Although I figured that this would be great and all and everything would work. Although what I learned is that without buying the suite you dont get a copy of version cue. Okay, Im thinking this is fine and all, untill I then start up Photoshop and start a new image, at which point Im greeted with this error:
Fatal error - missing component
The complete error message is in the picture
I checked out the forums and found help on disabling the options for versioncue, although they didnt help at all and the issue is still there.
Please help, I have to get PS working for my job, and Adobe Support wont help me.

michaelkemp2 wrote:
…what I learned is that without buying the suite you dont get a copy of version cue.
That is not true at all, Michael.
I have never bought any version of the suite, and the Adobe Version Cue support files have been installed by Photoshop 10.x and 11.x.
For some reason you have a bad install.
Try using the Adobe Uninstaller to uninstall Photoshop 11. Then Repair Permissions with Apple's Disk Utility. Then install Photoshop, and Repair Permissions once again.
DO NOT move the Photoshop icon, nor the Photoshop folder from the default install location in the root Applications folder.
Once you're up and running, apply all available updates.
If you're still having problems after that, please give details about your machine, OS, etc.

Photoshop CS3 crashes on File Open (related to Version Cue)

Hi all,
I found some threads on PS crashing on file opening, but none of these were describing my issue, nor were the suggested fixes working.
Here is what happens:
PS opens fine. I can open a file in PS if I open it from Bridge (or Explorer). If I select 'File > Open' in the PS menu however, the open file dialog attempts to open, but hangs and that's it. I can not escape out of it, and if I click close in the system tray it says PS is 'Not Responding' and sends an error message to Microsoft.
This is what fixes it:
In 'preferences' - if I disable Version Cue, Photoshop works perfectly again. Only thing is, I need to use Version Cue!
Anybody else have this issue? Any ideas for fixes???
Thanks all,
Anne

Memory address issues can be tough to track down. Often, they will occur when a program either mis-reports the memory addresses used, or tells the OS that it has released them, when it has not.
Though written with video editing in mind, there still might be some tips for setting up your computer, in this ARTICLE. If you have Win7, please look down-thread for Black Viper's tuning page.
Now, Adobe programs have always been great at reporting their memory usage, but it could still happen - I've just never encountered it over the decades.
Good luck,
Hunt

CS3 Version Cue not loading in Bridge

I'm trying to access a version cue server in bridge, but there is no button to access version cue in bridge. i know there is supposed to be a button in the favorites panel, but its not there, and there is no way to 'check it' in preferences. its checked under the startup scripts panel in preferences.
version cue server is started and running, its in my task manager as well as my taskbar.
I've tried uninstalling and reinstalling bridge and version cue several times, and that hasn't fixed the problem. I've tried unchecking version cue and sdkloader, then restarting bridge, then rechecking them, restarting bridge, to no avail. there is nothing in my inspector panel, nor in the inspector panel preferences. i even tried reinstalling all of CS3, that didn't help. but - i had the reinstaller save my preferences, b/c im apprehensive to lose all my custom workspace settings. i tried resetting the preferences in bridge with 'alt-ctrl' on load, didn't help.
any ideas would be great. if i can avoid completely removing CS3 (my preferences mainly) i would appreciate it.

You should see Version Cue under menu Edit => Preferences => and then select the General category. Version Cue should be the top left checkbox in Favorite Items at the bottom of the General category.
If you don't see Version Cue listed there, start the Version Cue server, and then start Bridge and try the above again. An easy way to start the server (provided that it has been started before, and is thus installed as a service) is to type the following at the Windows Command prompt:
net start "Adobe Version Cue CS3"
NOTE: You must include the quotes as shown immediately above.

Help! Can't open files in all programs since installing version cue upgrade

Please help. A few days ago I got some pop up (I'm in windows XP) saying updates were available for 2 adobe things. I just chose yes and kept working. Now, I can't open files in any of my CS3 programs. I have lost 4 days of productivity and fear losing my mind next!! after doing some research, it appears alot of people are having trouble since uploading some version cue upgrade for cs3. I followed their suggestions and unchecked VC in photoshop (my first offender) and suddenly I could open files again. But now I can't in Illustrator, but in preferences, it does not have VC checked.
I've tried uninstalling and reinstalling the whole package. I've tried just uninstalling VC. Nothing's working and I'm having major deadline problems now.
Please, please help! Thanks.
Anne

You can try a system restore to a point before the update. If you're lucky, it might work, but I often find System Restore will fail when you need it the most.
Peter

Labels on version cue folders

Similar Messages

Maybe you are looking for