Lable has been assigned ivalid infoobject

Hi Everybody,
I got the an error when i am executing standard webtemplate in the poratal ¨ Label has specified invalid InfoObject = '0RPM_ IDGU' ¨. This is the code for this Filter. Can you please explain what may be the cause,
Thanks
Suri.

how did you resolve this. we have a similar issue with 0CRMSA_OG_R ...
      <param name="SET_ITEM_34" value="DP1_FILTER3_LABEL" />
      <param name="ITEM_CLASS_34" value="CL_RSR_WWW_ITEM_LABEL" />
      <param name="IOBJNM_34" value="0CRMSA_OG_R" />
      <param name="HIDDEN_34" value="" />
      <param name="SET_ITEM_35" value="DP1_FILTER3_ITEM" />
      <param name="ITEM_CLASS_35" value="CL_RSR_WWW_ITEM_FILTER_DDOWN" />
      <param name="IOBJNM_35" value="0CRMSA_OG_R" />
      <param name="HIDDEN_35" value="X" />

Similar Messages

  • How do I display the playlist(s) to which my music has been assigned?

    I know that I have music in my library which is not in any of my playlists. The question is, "Which songs?" I suppose I could look in the playlist I think it should be in to see if it's there, but by number 500 or so my eyes get kind of tired; and what if I put it in the wrong playlist by accident; or what if I overlooked it? I suppose I could just start from scratch too, but I hope I don't have to do that. I think it would be a lot simpler if there were a way to display the playlist to which a piece of music is assigned in the music library window. That way I could see what playlist each piece was in as well as see if there are pieces that are not in any playlist. It would even be helpful if I could just click on an individual song to see what playlist, if any, I have it in. Is there a way to do either of these things? I hope so

    Using the Smart Playlist idea was a great help. It worked perfectly! Thank you very much for the suggestion. I really appreciate it. Now all of my music has been assigned to at least one Playlist. I always worry, though, that I may have accidentally dragged a song to the Playlist above or below it; or maybe I should have put it in different Playlist; or more than one Playlist. I guess I have a little OCD. Anyway, it would be nice just to be able to review all of the music information, including the playlists that are assigned, in the music list. It would be a lot easier with a lot less clicking. Thanks to your suggestion, though, I now know that all of the songs have been assigned to Playlists. Again, I appreciate your help. Thank you.

  • Determine all objects that a group has been assigned to

    I am trying to determine all objects that a group has been assigned to. For example, I would like to know what communities and portletes a group has been assigned to.
    I can retrieve the information directly from the plumtree database, however, I have not been able to determine how to accomplish this via the api.
    I have tried the following
    IPTObjectManager ptObjMng = ptSession.GetCommunities();
    for(inti = 0; i<3;i++)
    filter[i] = newObject[1];
    filter[0][0] = PT_PROPIDS.PT_PROPID_USERGROUP_GROUPID;
    filter[1][0] = PT_FILTEROPS.PT_FILTEROP_EQ;
    filter[2][0] = 1634; //group id for my group
    IPTQueryResult ptResult = ptObjMng.Query(PT_PROPIDS.PT_PROPID_ALL,-1,PT_PROPIDS.PT_PROPID_NAME,0,-1,filter);
    I have verified that the group has been assigned to the community, however, this query returns no records.
    How can I retrieve all communities or group that a specific group has been assigned too?
    thanks in advance

    This sure would be a handy feature! iTunes has it so that you can easily tell which playlists a song is in. It would be convenient for iPhoto as well.

  • How do I see the group that my contact has been assigned  to when I view the individual contact card?

    I have added my contacts to specifics groups via icloud. I want to be able to see the group my contact belongs to when I bring a contact up (either on my iphone or on icloud).  How can I get the "Group"  the contact has been assigned to to show on their contact?

    what do you mean by game-state
    PS: i asked this question and they told me to be more specific.

  • Select a location to which a plant has been assigned

    Hi all.
    We Work in SRM 5.0 Extended Scenario, ECC 6.0.
    When I try to make a PO from a SC system sends me the following error: Select a location to which a plant has been assigned.
    I made corrections in the organizational unit, assign default to the plant as buyers in extended attributes, but the problem persists.
    Any help will be good.

    Hi Raul,
    Check whether in the Extended Attributes of P.Org / P.Group where the user is assigned has Locations maintained or not.
    Also check for any check in the Deactivate check box.
    Check in BBP_LOCMAP table using SE16 txn. whether all the plants concerned were replicated from the correct logical system or not.
    Otherwise once again replicate the plants using BBP_LOCATIONS_GET_SELECTED report.
    Check for the consistency of Business partner using BBP_BP_OM_INTEGRATE txn by inputting the business partner number of plant.
    Please let us know after checking and modifying the above mentioned points for further help.
    Hope this will help you in resolving the issue.
    Award points for helpful answers.
    Rgds,
    Teja

  • How do you reassign a device to Mac OS once it has been assigned to the Windows OS using Parallels?

    How do you reassign a device to Mac OS once it has been assigned to the Windows OS using Parallels?  I've tried ejecting device and plugging in again.  I've tried restarting Mac and shutting down Mac completely, but never get the device window to pop up to select the Mac for the device.

    See:
    http://download.parallels.com/desktop/v5/docs/en/Parallels_Desktop_Users_Guide/2 6819.htm
    That is one topic from the guide, not the whole guide

  • Outbound error "No cross-system business area has been assigned to bu. area

    Hi  everyone,
    i have idoc failed in outbound  with error No cross-system business area has been assigned to business area 0001
    Thanks in advance
    Soufiene

    Hi  Fernando,
    The issue is from HR ,  an entry for an employee was entered and suppose not it generated idoc failed.
    Thanks
    Soufiene
    Edited by: Soufiene Tchantchane on Sep 7, 2011 10:32 PM

  • ERROR - Select a location to which a plant has been assigned

    1 Message
      Select a location to which a plant has been assigned  (Item  BOLT&NUT 4.6 COMM HEX HEAD BLK 10X170MM ) 
    this is the error message I get any idea how to fix it?
    Cheers
    B

    Hi. I presume the plants are linked correctly to the new company code in the backend, table T001K?
    Also, check the entries in SRM in table BBP_LOCMAP.
    Are the plants assigned to the right company codes in this table?
    There is an issue if you replicate plants to SRM then change the company code assignment SRM does not get updated.
    To correct BBP_LOCMAP you can use function BBP_CHANGE_ORGANIZATION.
    Regards,
    Dave.

  • No infoset has been assigned to user group

    Hi Experts
    I am having problem like this
    No infoset has been assigned to user group/sapquery/h2 .
    why its giving error like this . how do i slove this problem .
    thanks
    Sandya

    Hi,
    U might not have assigned the infoset query created to the user group...
    Check in T-Codes SQ01, SQ02 and SQ03 , whether everything is properly assigned and linked to each other.
    Regards
    Priya

  • Activity 0010 has been assigned material components - Deletion not allowed

    HI friends,
    Even after deleting the material from the activity, the system is giving the following error message
    Activity 0010 has been assigned material components - Deletion not allowed 
    The status of the activity is REL.
    One purchase order already created for this WBS element.
    The material found deleted from the activity but why it is giving the same  message.
    Activity 0010 has been assigned material components - Deletion not allowed
    Edited by: M.Alagesan on Sep 13, 2010 1:15 PM

    Is that material already consumed?
    Generally when you try to delete the operation, it also deletes the dependencies of the activity, i.e., it deletes the components associated to that activity, if it is not issued to the order.
    Check the details in your system.
    Praveen

  • How to display which folders a photo has been assigned to

    If you select a photo in an Event and want to know which folders you've previously added that photo to, can you tell? I've looked at the iPhoto shortcuts page and don't see anything there. In Address Book, if you want to know which Groups a contact has been assigned to, you highlight the Contact and press Command-Option. But that doesn't work in iPhoto.

    This sure would be a handy feature! iTunes has it so that you can easily tell which playlists a song is in. It would be convenient for iPhoto as well.

  • Whether the trip expense report/trip request has been assigned to a wbs?

    Hi Gurus,
    I need the logic in determing the following:
    - A trip expense report (PR05) has been assigned to a wbs. I have to determine this at header level and item level (individual receipts).
    - A trip request (TRIP) has been assigned to a wbs. I have to determine this at the header level alone.
    Thanks,
    Sukumar.

    Hi there,
    I am not talking about ESS here. I am in ecc6.0. I have the costs assigned for a travel expense report in PR05 at two levels:
    1) At the header level. The cost of the entire travel is assigned.
    2) For each item in the travel expense report. The cost of individual items in the travel are assigned.
    Let me know, if this provides clarity.
    Thanks.
    Sukumar.

  • Customer has been assigned order block--customer inactive

    Hi Friends, While creating sales order when I m putting sold to party I am getting the error
    customer has been assigned order block--customer inactive.I tried using XD05 there is no tick mark and I removed entry from sales/delivery/billing block. Still I am facing same error.
    Any pointers will be appreciated and rewarded.
    Regards

    Hi there,
    When you remove the customer block in VD05, you have to come back of the order entry screen.
    You have to re-enter the order again. Only then it will allow you.
    This is to refresh the system after you removed the block.
    Regards,
    Sivanand

  • A filter has been assigned that evaluates to an empty region.

    Hi!
    We have migrated our hyperion system 9 to 11 and we are having trouble with essbase. We have the two version "running" (in separated servers) and we've noticed when the user who has a filter in the essbase security and this user acess the cube from spreadsheet add-in on the version 11, he get the warning "A filter has been assigned that evaluates to an empty region. Filter is ignored. ". In the system 9 this warning this doesn't happen. I've checked the two databases and I saw they are exactly the same. Why does this warning happen just on the system 11? What does it means?
    Regards,
    Rafael Melo - BR

    Is it 11.1.2 that you are referring to, if it is then it may be worth having a read of "Warning "1022004 A filter has been assigned that evaluates to an empty region. Filter is ignored" [ID 1300347.1]" on My Oracle support.
    Sympton
    In the Essbase Excel Add-In, when trying to connect to an application/database and retrieve data with a user filter definition that includes MetaRead the following warning message appears:
    "Warning 1022004 A filter has been assigned that evaluates to an empty region. Filter is ignored."
    Cause
    The cause of this problem is unknown.
    This issue has been identified as unpublished Bug 9700270 - SPURIOUS WARNING WHEN SELECTING AN APP WHEN METADATA-FILTER ANCESTORS OVERLAP
    Solution
    This issue has been fixed in release 11.1.2.1.
    Strange how the cause of the problem is unknown yet it is fixed in 11.1.2.1, how you fix something that is unknown I will never know.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Getting a runtime error in block alv that field symbol has been assigned

    hi to all experts ,
    im getting a runtime error that field symbol has not been assigned in functionmodule reuse_alv_block_list_display
    i tried a lot to rectify the error ,im unable to do it thats i have posted here
    *& Report  ZHAI_ALV_BLOCK_LIST
    REPORT  ZHAI_ALV_BLOCK_LIST.
    type-pools:slis.
    tables:mara.
    DATA:BEGIN OF  IT_MARA OCCURS 0,
            MATNR LIKE MARA-MATNR,
            MBRSH LIKE MARA-MBRSH,
            MATKL LIKE MARA-MATKL,
            END OF IT_MARA.
    data: begin of IT_DESC OCCURS 0,
             MATNR like MAKT-MATNR,
             MAKTX like MAKT-MAKTX,
         end of IT_DESC.
    data: begin of IT_MARD occurs 0,
            MATNR like mard-matnr,
            WERKS  like  mard-werks,
            LGORT  like  mard-lgort,
            LABST like mard-labst,
          end of IT_MARD.
    data: IT_FCAT TYPE SLIS_T_FIELDCAT_ALV ,
          WA_FCAT LIKE LINE OF IT_FCAT,
          IT_FCAT1 type  slis_t_fieldcat_alv,
          WA_FCAT1 LIKE LINE OF IT_FCAT1,
          IT_FCAT2 TYPE SLIS_T_FIELDCAT_ALV,
          WA_FCAT2 LIKE LINE OF IT_FCAT2,
          wa_layout type  SLIS_LAYOUT_ALV,
          it_event type SLIS_T_EVENT,
          wa_event like line of it_event,
         wa_layout like line of it_layout,
          V_REPID LIKE SY-REPID.
    select-options:so_matnr for mara-matnr.
    start-of-selection.
    perform f_select_data.
    DEFINE ADD_CATALOGUE1.
    WA_FCAT-COL_POS = &1.
    WA_FCAT-fieldname = &2.
    WA_fcat-tabname = &3.
    wa_fcat-emphasize = &4.
    wa_fcat-ref_tabname = &5.
    APPEND WA_FCAT TO IT_FCAT.
    END-OF-DEFINITION.
    DEFINE ADD_CATALOGUE2.
    WA_FCAT1-COL_POS = &1.
    WA_FCAT1-fieldname = &2.
    WA_fcat1-tabname = &3.
    wa_fcat1-emphasize = &4.
    wa_fcat1-ref_tabname = &5.
    APPEND WA_FCAT1 TO IT_FCAT1.
    END-OF-DEFINITION.
    DEFINE ADD_CATALOGUE3.
    WA_FCAT2-COL_POS = &1.
    WA_FCAT2-fieldname = &2.
    WA_fcat2-tabname = &3.
    wa_fcat2-emphasize = &4.
    wa_fcat2-ref_tabname = &5.
    APPEND WA_FCAT2 TO IT_FCAT2.
    END-OF-DEFINITION.
    perform f_build_fcat.
    *perform f_build_fcat1.
    perform f_build_fcat2.
    PERFORM F_BUILD_LAYOUT.
    PERFORM F_BUILD_EVENTS.
    PERFORM F_BLOC_DISPLAY.
    *&      Form  f_select_data
    FORM f_select_data .
    select matnr
           mbrsh
           matkl
         from mara into  table it_mara where matnr
    in so_matnr.
    if it_mara[] is not initial.
    select matnr
           maktx
           from makt
           into   table it_desc
           for all entries in it_mara
           where matnr eq it_mara-matnr.
    endif.
    if it_desc[] is not initial.
    select matnr
           werks
           lgort
           labst
           from mard
           into  table it_mard
           for all entries in it_desc
           where matnr eq it_desc-matnr.
    endif.
    ENDFORM.                    " f_select_data
    *&      Form  f_build_fcat
    FORM f_build_fcat .
    ADD_CATALOGUE2:
    '1' 'MATNR' 'IT_MARA' 'C500' 'MARA',
    '2' 'MBRSH' 'IT_MARA' 'C600' 'MARA',
    '3' 'MATKL' 'IT_MARA' 'C300' 'MARA'.
    ENDFORM.                    " f_build_fcat
    **&      Form  f_build_fcat1
    FORM f_build_fcat1 .
    ADD_CATALOGUE1:
    '1' 'MATNR' 'IT_DESC' 'C500' 'MAKT',
    '2' 'MAKTX' 'IT_DESC' 'C600' 'MAKT'.
    ENDFORM.                    " f_build_fcat1
    *&      Form  f_build_fcat2
    FORM f_build_fcat2.
    ADD_CATALOGUE3:
    '1' 'MATNR' 'IT_MARD' 'C500' 'MARD',
    '2' 'WERKS' 'IT_MARD' 'C600' 'MARD',
    '3' 'LGORT' 'IT_MARD' 'C200' 'MARD',
    '4' 'LABST' 'IT_MARD' 'C300' 'MARD'.
    ENDFORM.                    " f_build_fcat2
    *&      Form  F_BLOC_DISPLAY
          text
    -->  p1        text
    <--  p2        text
    FORM F_BLOC_DISPLAY .
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
      EXPORTING
        I_CALLBACK_PROGRAM             = SY-REPID.
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
      EXPORTING
        IS_LAYOUT                        = wa_layout
        IT_FIELDCAT                      = it_fcat
        I_TABNAME                        = 'IT_MARA'
        IT_EVENTS                        = it_event
      IT_SORT                          =
      I_TEXT                           = ' '
      TABLES
        T_OUTTAB                         = IT_MARA
    EXCEPTIONS
      PROGRAM_ERROR                    = 1
      MAXIMUM_OF_APPENDS_REACHED       = 2
      OTHERS                           = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
      EXPORTING
        IS_LAYOUT                        = wa_layout
        IT_FIELDCAT                      = it_fcat1
        I_TABNAME                        = 'IT_DESC'
        IT_EVENTS                        = IT_EVENT
      IT_SORT                          =
      I_TEXT                           = ' '
      TABLES
        T_OUTTAB                         = IT_DESC
    EXCEPTIONS
      PROGRAM_ERROR                    = 1
      MAXIMUM_OF_APPENDS_REACHED       = 2
      OTHERS                           = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
      EXPORTING
        IS_LAYOUT                        = wa_LAYOUT
        IT_FIELDCAT                      = IT_FCAT2
        I_TABNAME                        = 'IT_MARD'
        IT_EVENTS                        = IT_EVENT
      IT_SORT                          =
      I_TEXT                           = ' '
      TABLES
        T_OUTTAB                         = IT_MARD
    EXCEPTIONS
      PROGRAM_ERROR                    = 1
      MAXIMUM_OF_APPENDS_REACHED       = 2
      OTHERS                           = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " F_BLOC_DISPLAY
    *&      Form  F_BUILD_LAYOUT
          text
    -->  p1        text
    <--  p2        text
    FORM F_BUILD_LAYOUT .
    wa_layout-edit = 'X'.
    wa_layout-window_titlebar = 'MOHAMMED ABDUL HAI'.
    wa_layout-zebra = 'X'.
    ENDFORM.                    " F_BUILD_LAYOUT
    *&      Form  F_BUILD_EVENTS
          text
    -->  p1        text
    <--  p2        text
    FORM F_BUILD_EVENTS .
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
       I_LIST_TYPE           = 0
    IMPORTING
       ET_EVENTS             = IT_EVENT
    EXCEPTIONS
       LIST_TYPE_WRONG       = 1
       OTHERS                = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    SORT IT_EVENT BY NAME.
    READ TABLE it_event INTO wa_event WITH KEY NAME = 'TOP_OF_PAGE' bINARY
    SEArch.
    if sy-subrc eq 0.
    wa_event-form = 'F_TOP_OF_PAGE'.
    ENDIF.
    MODIFY IT_EVENT FROM WA_EVENT INDEX SY-TABIX TRANSPORTING FORM.
    READ TABLE IT_EVENT INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND' BINARY SEARCH.
    WA_EVENT-FORM = 'F_USER_COMMAND'.
    MODIFY IT_EVENT FROM wa_event INDEX SY-TABIX TRANSPORTING FORM.
    ENDFORM.                    " F_BUILD_EVENTS

    Hi,
    When does this runtime error occur? When displaying output (calling FM) or.....
    I copied your coding and made a few minor changes and It's working fine for my now:
    REPORT ZHAI_ALV_BLOCK_LIST.
    TYPE-POOLS:slis.
    TABLES:mara.
    DATA:BEGIN OF it_mara OCCURS 0,
    matnr LIKE mara-matnr,
    mbrsh LIKE mara-mbrsh,
    matkl LIKE mara-matkl,
    END OF it_mara.
    DATA: BEGIN OF it_desc OCCURS 0,
    matnr LIKE makt-matnr,
    maktx LIKE makt-maktx,
    END OF it_desc.
    DATA: BEGIN OF it_mard OCCURS 0,
    matnr LIKE mard-matnr,
    werks LIKE mard-werks,
    lgort LIKE mard-lgort,
    labst LIKE mard-labst,
    END OF it_mard.
    DATA: it_fcat TYPE slis_t_fieldcat_alv ,
          wa_fcat LIKE LINE OF it_fcat,
          it_fcat1 TYPE slis_t_fieldcat_alv,
          wa_fcat1 LIKE LINE OF it_fcat1,
          it_fcat2 TYPE slis_t_fieldcat_alv,
          wa_fcat2 LIKE LINE OF it_fcat2,
          wa_layout TYPE slis_layout_alv,
          it_event TYPE slis_t_event,
          wa_event LIKE LINE OF it_event,
    *      wa_layout like line of it_layout,
    v_repid LIKE sy-repid.
    SELECT-OPTIONS:so_matnr FOR mara-matnr.
    START-OF-SELECTION.
      PERFORM f_select_data.
      DEFINE add_catalogue1.
        wa_fcat-col_pos = &1.
        wa_fcat-fieldname = &2.
        wa_fcat-tabname = &3.
        wa_fcat-emphasize = &4.
        wa_fcat-ref_tabname = &5.
        append wa_fcat to it_fcat.
      END-OF-DEFINITION.
      DEFINE add_catalogue2.
        wa_fcat1-col_pos = &1.
        wa_fcat1-fieldname = &2.
        wa_fcat1-tabname = &3.
        wa_fcat1-emphasize = &4.
        wa_fcat1-ref_tabname = &5.
        append wa_fcat1 to it_fcat1.
      END-OF-DEFINITION.
      DEFINE add_catalogue3.
        wa_fcat2-col_pos = &1.
        wa_fcat2-fieldname = &2.
        wa_fcat2-tabname = &3.
        wa_fcat2-emphasize = &4.
        wa_fcat2-ref_tabname = &5.
        append wa_fcat2 to it_fcat2.
      END-OF-DEFINITION.
      PERFORM f_build_fcat.
      PERFORM f_build_fcat1.
      PERFORM f_build_fcat2.
      PERFORM f_build_layout.
      PERFORM f_build_events.
      PERFORM f_bloc_display.
    *& Form f_select_data
    FORM f_select_data .
      SELECT matnr
      mbrsh
      matkl
      FROM mara INTO TABLE it_mara WHERE matnr
      IN so_matnr.
      IF it_mara[] IS NOT INITIAL.
        SELECT matnr
        maktx
        FROM makt
        INTO TABLE it_desc
        FOR ALL ENTRIES IN it_mara
        WHERE matnr EQ it_mara-matnr.
      ENDIF.
      IF it_desc[] IS NOT INITIAL.
        SELECT matnr
        werks
        lgort
        labst
        FROM mard
        INTO TABLE it_mard
        FOR ALL ENTRIES IN it_desc
        WHERE matnr EQ it_desc-matnr.
      ENDIF.
    ENDFORM. " f_select_data
    *& Form f_build_fcat
    FORM f_build_fcat .
      add_catalogue2:
      '1' 'MATNR' 'IT_MARA' 'C500' 'MARA',
      '2' 'MBRSH' 'IT_MARA' 'C600' 'MARA',
      '3' 'MATKL' 'IT_MARA' 'C300' 'MARA'.
    ENDFORM. " f_build_fcat
    **& Form f_build_fcat1
    FORM f_build_fcat1 .
      add_catalogue1:
      '1' 'MATNR' 'IT_DESC' 'C500' 'MAKT',
      '2' 'MAKTX' 'IT_DESC' 'C600' 'MAKT'.
    ENDFORM. " f_build_fcat1
    *& Form f_build_fcat2
    FORM f_build_fcat2.
      add_catalogue3:
      '1' 'MATNR' 'IT_MARD' 'C500' 'MARD',
      '2' 'WERKS' 'IT_MARD' 'C600' 'MARD',
      '3' 'LGORT' 'IT_MARD' 'C200' 'MARD',
      '4' 'LABST' 'IT_MARD' 'C300' 'MARD'.
    ENDFORM. " f_build_fcat2
    *& Form F_BLOC_DISPLAY
    * text
    FORM f_bloc_display .
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
        EXPORTING
          i_callback_program = sy-repid.
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
      EXPORTING
      is_layout = wa_layout
      it_fieldcat = it_fcat1
      i_tabname = 'IT_MARA'
      it_events = it_event
    *IT_SORT =
    *I_TEXT =
      TABLES
      t_outtab = it_mara
      EXCEPTIONS
      program_error = 1
      maximum_of_appends_reached = 2
      OTHERS = 3
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
      EXPORTING
      is_layout = wa_layout
      it_fieldcat = it_fcat1
      i_tabname = 'IT_DESC'
      it_events = it_event
    *IT_SORT =
    *I_TEXT =
      TABLES
      t_outtab = it_desc
      EXCEPTIONS
      program_error = 1
      maximum_of_appends_reached = 2
      OTHERS = 3
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
      EXPORTING
      is_layout = wa_layout
      it_fieldcat = it_fcat2
      i_tabname = 'IT_MARD'
      it_events = it_event
    *IT_SORT =
    *I_TEXT = ' '
      TABLES
      t_outtab = it_mard
      EXCEPTIONS
      program_error = 1
      maximum_of_appends_reached = 2
      OTHERS = 3
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM. " F_BLOC_DISPLAY
    *& Form F_BUILD_LAYOUT
    FORM f_build_layout .
      wa_layout-edit = 'X'.
      wa_layout-window_titlebar = 'MOHAMMED ABDUL HAI'.
      wa_layout-zebra = 'X'.
    ENDFORM. " F_BUILD_LAYOUT
    *& Form F_BUILD_EVENTS
    FORM f_build_events .
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type     = 0
        IMPORTING
          et_events       = it_event
        EXCEPTIONS
          list_type_wrong = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      SORT it_event BY name.
    READ TABLE it_event INTO wa_event WITH KEY name = 'TOP_OF_PAGE' BINARY
    SEARCH.
      IF sy-subrc EQ 0.
        wa_event-form = 'F_TOP_OF_PAGE'.
      ENDIF.
      MODIFY it_event FROM wa_event INDEX sy-tabix TRANSPORTING form.
    READ TABLE it_event INTO wa_event WITH KEY name = 'USER_COMMAND' BINARY
    SEARCH.
      wa_event-form = 'F_USER_COMMAND'.
      MODIFY it_event FROM wa_event INDEX sy-tabix TRANSPORTING form.
    ENDFORM. " F_BUILD_EVENTS

Maybe you are looking for

  • I updated the software on my ipad2 at work and now it won't connect via wifi

    The 3G works fine and the device connects to the router ok but there is no Internet access

  • How to convert .apk to .rpm?

    Hi friends, Can anyone guide me as to how can I convert a .apk file to .rpm? I created a sample app in flex 4.5 and now I want to convert it to .rpm extension. I found rpm-to-apk converter but no apk-to-rpm converter. Kindly help.

  • Exposure change after Photoshop freeze and MBP restart

    Strange thing and I need help. Last night I was editing pictures with PSCS and viewing in iphoto when PS quit opening (I click on the icon but the program would not open, just bounce in the dock for a second). I restarted my MBP and all of my photos

  • Oracle Critical Patch Update July 2009 for Oracle BEA Releases

    Hi All, Researching in metalink about CPU's for WLS 9.1 I found Oracle Support Note #835668.1. Table 9 of this document lists minimum product requirements for WebLogic server. According to this table WLS 9.1 should have a minimum version of 9.2MP3. I

  • How do you define Net Weaver ?

    Si Netweaver the collection of several object, including J2EE and the dev studio, or is it defined simply as the Dev studio Is J2EE considered a part of Netweaver, or a different product altogether ? Thanks, John