Labor Tracking with no clock in required

Hello together,
I have Problems to understand Labor tracking Feature. I working with How-to-Guide for Labor and I want to set up Example 3 of rollup rules (Page 36). One of the prerequisites is "to set up Labor Tracking with no clock in required". But I do not know how to do that because the guide never presented that Option before. Also the figure of the example Shows clock in and out timestamp.
Pleas help.
Thanks and regards,
Anke

Hello Anke,
There is section 4.5.1 'Defining Attendance Rules', which answers your question. You can use
Manual Clock-In (default): To let users log on with no clock in and perform manual clock-in/out
in POD, if required.
Br, Alex.

Similar Messages

  • Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road.

    Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road while driving. For that reason, I'm also not interested in adding in headphones or additional devices that have the desired button functions. Going both forward and back would be great but I would be pleased just to have a "sight-free" way to go forward.
    I've seen some mention here and there about ways to maybe change it so the volume buttons change tracks and holding the volume buttons changes the volume... but I don't know what's involved in that or if its even possible/recommended for a new 5th gen iPod. I think its a great device but its sadly lacking in music oriented functions and features... which is disappointing since music is why most people would bother getting one instead of some other "iDevice" :/

    Given that you cannot do what you have asked for, perhaps you simply need to find another solution to your root problem.
    Presumably, you want to skip to the next track because you don't want to hear the current one, and that is because...
    You don't like it.
    You've heard it recently and don't want to hear it now.
    Simply don't want to hear it at this time.
    For problem number 1. Don't put it on the iPod in the first place. (I know, obvious answer!)
    For problem number 2. How about playing from a Smart Playlist (initially created in your iTunes Library) which has only songs you've not played recently?
    For problem number 3. Hhhmmm! Create alternative Playlists for use in the car.
    As for going back to the start of the "now playing" track.... Well, if your Playlist has only songs that you really, really want to hear, then you'll be looking forward to that rather go back to the beginning of the current song.
    I'm not trying to be prescriptive, just giving you food for thought.
    (They are all cheaper options than buying a car which can control the iPod from the steering wheel.)

  • What's the minimum Clock Speed Requirement for GB3?

    What's the minimum Clock Speed Requirement for GB3 (assuming one wishes to create and play mult. audio tracks within this current iLife app)? Is it 733mhz?
    Here's what i was able to find on
    iLife ’06 requirements:
    To install iLife, you need:
    • A Macintosh computer with a PowerPC G4, G5, or Intel Core processor; 733 MHZ or faster required for iDVD
    • 256 MB of RAM; 512 MB recommended
    • Mac OS X version 10.3.9 or Mac OS X version 10.4.3 or later; Mac OS X version 10.4.4 recommended
    • iTunes 6.0.2 and QuickTime 7.0.4 (included)
    • A DVD drive for installation
    • 10 GB of disk space to install iLife '06 applications

    Thanks Christoph, TIA, and AppleGuy!
    Christoph, what model are you using? You said you have even less Mhz, but your model looks like the same as mine.
    TIA, I looked at the other thread (thanks for the link) any idea what other models are affected by the sound output problem?
    I probably will back up first just to be safe, and won't try running them both at the same time. I was hoping though to have full functionality of the Podcasting features plus all the old music ones without slowing the machine down.
    Tansef

  • Meaning of acronyms SFC and POD in Visiprise Labor Tracking document?

    Hello xMII Community,
    I have been working with Michael Appleby in regards to questions for ME II and have found documentation for same.
    https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000697067
    In the "Setting up Labor Tracking" document, there are two acronyms - SFC and POD.
    My initial take on SFC was that it was "Shop Floor Control", but after reading it in context of several sentences that definition did not work.  Here is a couple of sentences that use both both acronym's ...
    > Working in the POD -  If the user is a production operator using the POD, as he or she begins recording work in the POD, the system charges time against the labor. The system generates SFCs when you release product demand to the shop floor. The system assigns the labor charge code (LCC) associated with a shop order to each SFC as it generates them.
    You can allow users or supervisors to change the LCC associated with an SFC after the system has assigned it.<------
    Here is another example...
    >  At his or her workstation, the operator works one SFC at a time in the POD. <----
    So my question is - in the context of the above examples, what do "SFC" and "POD" stand for?
    Best Regards,
    Dean Atteberry.
    Edited by: Dean Atteberry on Jul 2, 2009 6:07 PM
    Edited by: Dean Atteberry on Jul 2, 2009 6:09 PM

    "SFC" is an acronym for "Shop Floor Control" .  In SAP ME, it is an ID that reprsents a production unit or lot used for for detailed manufacturing traceability. 
    "POD" is an acronym for "Production Operataor Dashboard".  In SAP ME, it is the primary user interface of the shop floor operator.  PODs can be configured for each user, work center, or plant depending on the requirements.

  • Two new SCs in the same track - with dependencies

    Hello Guys,
    We are going to create an NWDI track with two new Software Components.
    1. SC for Services (let us call it SC-A)
    2. SC for UI Content (let us call it SC-B)
    These are going to be brand new SCs created in SLD and imported into one NWDI track for starting the development.
    SC-B is going to be dependent on SC-A.
    (SC-B will use various services provided by SC-A which will be made available via public parts).
    I will create the SCs in SLD and define the necessary dependencies accordingly (between SC-B and SC-A).
    I will then create the track with the above two SCs as developed Software Components.
    Initially at the check in stage, I will not have any sources (SCA files) for the above two software components itself (since
    they are brand new - without any code yet). However, I will checkin the other required SCAs (JEE, JBUILDT, JTECHS, .. ).
    My concerns / questions are:
    1. Can we do the development on both the software components in parallel?
    2. Let us say, I created a DC with name DC-A in SC-A (via a NWDS activity) and after checking that activity in and activating my changes,
    I created another DC with name DC-B in SC-B which uses DC-A from SC-A, would this be a problem?
    3. In question 2 above, do I have to take care of the dependencies in a different way ?
    (when compared to having both the used DC and USing DC in the same SC)
    4. Can I add more SCs into the same track (which will probably use both SC-A and SC-B) in the future ?
    I believe that this is going to be just fine but I am a little confused around the initial "check-in" of the requires SCAs into the track.
    Also, we are going to spend a lot of time in the development system itself and it would be nice to work in parallel on both the SCs.
    (The assembly of the above said SCs is only going to happen after a few months of development effort).
    I also understand that we can have the two SCs in separate tracks but we really want them in the same track and be able to work on them in parallel.
    Please throw some light in this area ...
    Thanks for taking time to read ...
    Thanks,
    Kalyan

    Hi Kalyan,
    To your questions:
    1. Yes.
    2. No, make sure to sync you used DC's on DC-B.
    3. No, this is a legitimate SC-DC architecture.
    4. Yes, but for "future" projects you probably want to use new tracks.
    You should check-in the required SCA's AND import them in development.
    You can work parallel on both SC's.
    You better use one track as assembly/deployment will be on the same date, otherwise you need track connections (either a repair, which needs a NWDS-release of perhaps not tested functionality, or a transport, which needs a complete & approved SC-A, is it?).
    Let me just say: I have the same architecture and it works fine for me.
    Hope this helps,
    Regards,
    Alain

  • Sound Stutters when i select track with music in it, Resolution Problem?

    Hello
    Im having a bit of a problem with logic 8, i had this problem in 7 as well and i figured it would be resolved when i upgraded but alas no love. Basically when i select a track that has somthing on it in the sequencer window a l the sound starts stuttering and i eventually get the following error message
    Could Not synchronize audio and midi
    Sample Rate 34597 recognized.
    Check conflict between Logic Pro and external device.
    Now i looked this up on the logic support page and it says theirs a method of reseting all the sample rates in 7 but i am unable to find this in logic 8.
    Please please help me with this as i am unable to play anything using midi or to properly work in general and i have several projects due.
    Many thanks in advanced

    I have a m-audio fire wire audio device but i am not using it right now. Only when i want to record thngs. As for external sync modes or clocking from a digital source to my knowledge i am not. Is their a method i can check to see if im doing this?
    I have the feeling its nothng to do with the buffer sizes as the strange thing is that sound will play fine so long as i have selected a track that has nothing on it. Its only when i select a track with either audio or midi in it that the sound starts stuttering. Also the fact that its detecting a sample rate of 34597 seems a bit strange as logic works on 41.1.
    All very strange. Im thinking it may have somthing to do with the midi device settings as its only when i select a track that im getting this stuttering so perhaps logics sample rate settings on the track change when its receiving input from the midi controller?

  • Domain Controller - Time Syncing with CMOS Clock

    Hello!
    We have a DC that is syncing time from "local CMOS clock."  This DC is a VM (hyper V).  Integration services has "time sync" turned off.
    I've attempted syncing the DC to an external time source per http://www.thirdtier.net/2011/02/how-to-set-an-ntp-time-server-in-windows-2008-sbs-2008-and-sbs-2011/ and the issue persists.
    Also of note - I've attempted syncing the VMHOST to an external source as well, and it is only syncing with CMOS clock
    w32tm /config /manualpeerlist:"time.windows.com" /syncfromflags:manual /reliable:yes /update
    - results>
    I manually restarted Windows Time service, still syncing to CMOS
    w32tm /resync /rediscover
    - results> 
    the computer did not resync because no time data was available
    w32tm /stripchart /computer:time.windows.com /samples:5 /dataonly
    - results>
    Tracking time.windows.com [65.55.56.206:123].
    Collecting 5 samples.
    The current time is 4/14/2014 12:34:41 PM.
    12:34:41, -16.0686354s
    12:34:43, error: 0x800705B4
    12:34:46, -16.0885249s
    12:34:48, -16.0981303s
    12:34:50, -16.0785199s
    w32tm /monitor
    - results>
    EVEREST.COMPANYNAME.local[192.168.45.34:123]:
        ICMP: 0ms delay
        NTP: +17.4000482s offset from COMPANYNAME-DC1.COMPANYNAME.local
            RefID: 'LOCL' [0x4C434F4C]
            Stratum: 1
    COMPANYNAME-DC1.COMPANYNAME.local *** PDC ***[192.168.45.31:123]:
        ICMP: 0ms delay
        NTP: +0.0000000s offset from COMPANYNAME-DC1.COMPANYNAME.local
            RefID: 'LOCL' [0x4C434F4C]
            Stratum: 1
    COMPANYNAME-MGMT.COMPANYNAME.local[192.168.45.33:123]:
        ICMP: error IP_REQ_TIMED_OUT - no response in 1000ms
        NTP: error ERROR_TIMEOUT - no response from server in 1000ms
    COMPANYNAME-DS1.COMPANYNAME.local[192.168.45.32:123]:
        ICMP: 0ms delay
        NTP: +14.7149589s offset from COMPANYNAME-DC1.COMPANYNAME.local
            RefID: 80.84.77.86.rev.sfr.net [86.77.84.80]
            Stratum: 2
    EVEREST.COMPANYNAME.local = 2k3 box
    COMPANYNAME-MGMT.COMPANYNAME.local = old DC improperly removed from domain (aka was just deleted from Hyper V by another technician...)
    COMPANYNAME-DC1.COMPANYNAME.local = primary "main" DC, 2k8
    COMPANYNAME-DS1.COMPANYNAME.local = backup DC, 2k8
    I can provide whatever other info that may prove useful.  I've looked @ other posts RE: this issue and feel like I might be missing something obvious, but I am at a loss.
    Thank you!

    Hi,
    Is UDP 123 open on the machine? I suggest you try to disable firewall to see if it works.
    More information for you:
    Can't get NTP time working on SErver 2008 R2 DC
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/e5e26e4f-1988-4ec1-8837-6d1d503130e7/cant-get-ntp-time-working-on-server-2008-r2-dc?forum=windowsserver2008r2general
    Configuring the Windows Time Service for Windows Server
    http://msmvps.com/blogs/acefekay/archive/2009/09/18/configuring-the-windows-time-service-for-windows-server.aspx
    Error message when you run the "w32tm /resync" command to synchronize Windows Server 2003 or Windows SBS to an external time source: "The computer did not resync because no time data
    was available"
    http://support.microsoft.com/kb/929276
    Time synchronization is not performed even though the W32Time service is successfully started in Windows Server 2008 or in Windows Server 2008 R2
    http://support.microsoft.com/kb/2493006
    Best Regards,
    Amy

  • Flexible DWS with fixed Clock-In

    Hi All,
    Kindly i wanna help in a very critical issue,
    A flexible DWS has been created for working a 9 hours aday
    but a new edit must be done on this DWS
    Please i want to limit the Clock in to 9:00 AM "Make it a flexible DWS but employee can clock in maximum at 9:00 am "
    Example: Employee X Clock in = 9:15 and Clock out = 18:30 has a working time 9 hours and 15 minutes but a deduction must be calculated for being late after 9:00 am
    please advise
    Thanks

    The issue if exactly like the following example
    an employees required to work 9 hours a day
    they can come from 8:00 am to 09:00 am but from 8:00 to 9:00 is not tolerance, the system required to calculate 9 hours from clocking in with maximum clocking in 09:00 am
    Emp X clock in 8:00 he must clock out MINIMUM at 17:00
    Emp Y clock in 8:30 he must clock out MINIMUM at 17:30
    Emp Z clock in 9:00 he must clock out MINIMUM at 18:00
    but clocking in after 9:00 am is not allowed
    Thanks

  • When i have a music track with muted video above I get a regular beep in the audio,how do I stop it?

    when i have a music track with muted video above I get a regular beep in the audio,how do I stop it?

    The audio requires rendering.
    Audio for FCE should be aiff format @48 kHz.
    FCE can also use 32 kHz if the audio from a camera is 12 bit.
    Al

  • Labor Tracking In SAP ME 5.2

    Hi all,
    I'm trying to do Labor Tracking activity in SAP ME 5.2. I have some doubts in it.
    1) What is RollUp? where shoud i configure for doing rollup?
         In Labor Rule Maintenance i have set the rules. Is there any other place we need to configure?
    2) I'm not able to do Supervisor Time Edit and Approval activity. In the documents it is given that once roll up has been done,
         cost center supervisors can edit and approve time records for their employees.
         Am i getting this problem due to roll up?
    3) In LCC Summary Report i'm not able to see any changes for the LCC if i chnage the User LCC in Change User LCC activity.
         Only the default LCC provided in Shop order is displayed.
    Can anyone tell me how to solve all these?
    Thanks,
    Joe

    Hi Sergiy,
    I have enabled System rule and defined Labor rules.
    Could u pls tell me which BAT file to run?
    Whether it is ODSLaborRollup.BAT file?
    For 3) the scenario is:
    I have created one user as OPER in user maintenance and assigned him FIRST_SHIFT as Primary shift.
    Default LCC as PRODUCTION.
    In User Shift Maintenance, for the FIRST_SHIFT i have defined BREAK times.
    The user Clocks in manually in POD. During BREAK times, i went to Change USER LCC activity and changed the particular user's LCC as IDLE_TIME. Once the Break time got over, again i changed the user LCC to Production.
    At the end of the shift i Clocked out.
    Now wen i see the LCC summary report i'm not able to find the changed User LCC and the report shows only PRODUCTION as the user's LCC.
    Could u pls tell me whether i have configured properly? And how to solve this?
    Thanks,
    Joe.
    Edited by: Joe Brot on Feb 21, 2011 10:57 AM

  • DIO Pattern with external clock

    I use Pattern Input with external clock, I only wire external clock to REQ pin, I see how frecuency vary, but I do not receive data but the one that was latched last time, Do I need to wire something else in order to receive correct and continuos data? I think I just need a singnal to get data latched every time I require trought external clock. What do I have to do to get my application running?

    It sounds as though you are using a NI-653X data acquisition board to perform Pattern Input. When performing Pattern Input, data is transferred upon the rising or falling edge (user configurable) of each clock pulse. This clock signal can be externally provided or internally generated. To use an external clock signal of up to 20MHz, simply connect the signal to the REQ pin as you are doing.
    I recommend trying a LabVIEW shipping example already set up to do pattern input. The particular example I am thinking of gives you the option to try either an internal clock or provide an external clock. I would recommend trying each option. I do not know which version of LabVIEW you have but will provide the path to the example in LabVIEW 7; the path is very simi
    lar in earlier versions of LabVIEW:
    Help >> Find Examples >> Hardware Input and Output >> DAQ >> Digital Input and Output >> 653x >> Cont Pattern Input.vi
    I hope this helps!
    Sonya

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • Can't get more than one Ultrabeat sound setting in one project. If I have a drum track with an Ultrabeat "downtempo kit" and I make another drum track with "hip hop kit" in the same project, the settings of the other track transform to "hip hop" setting.

    So here's my situation.  I'm using Logic Pro 9.  I'm trying to use multiple drum tracks each with different Ultrabeat settings.  So let's say I have drum track with a loop from Ultrabeat that has the "downtempo kit 2" setting on it.  If I make another drum track and create a different loop in Ultrabeat with a different setting, let's say "hip hop kit" for example, and put that loop onto the new track, then the previous loop that I had in the first drum track will still be the same loop but the sound kit settings change to that of "hip hop kit."  So I can have different loops, but they all have to be "hip hop kit" settings or "downtempo kit 2" settings.  I am unable to multiple kit settings.  Is there a box I need to check to turn some automation off or something, because this is pretty inconvinient?  Why do I have to have only one Ultrabeat sound/kit setting per Logic project?

    Sounds like maybe you're using the same channel strip on multiple tracks? Make sure you're creating a new software instrument channel strip for each independent instance of Ultrabeat you want to have. If you use the same CS, then all tracks that use it will have to have the same kit.

  • How do you setup a send to a track with multiple effects?

    I am just learning how to mix and master songs as well as using Adobe Audition and was wonder if it was possible to allow a track to have multiple sends on them, Lets say one send containing Reverb on one bus, then another send applied to the same track containg delay thus allwoing me to controll idependently how hard the two seperate affects will contribute to the mix.

    Audition allows you to have up to 16 sends on each track with a separate level control on each. And you can set up a bus track for each containing it's own effects rack. If you really want to you can use any one of the sixteen sends from a bus to another bus or to the master track.

  • How can I export an audio track with just the effect signal without the audio?

    I want to export dry audio tracks and their effects signals as separate tracks. For instance a track with a reverbed snare would be one track with the dry snare and one with just the reverb.
    I know from people who use Reason that it's just a box you need to tick, but I'm struggling to find out how to do it in Logic. Surely it must be a way?

    I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
    Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience. 

Maybe you are looking for