LabVIEW 2009 program runs with no issues .exe does not

Hello,
We have been doing some new LabVIEW development.  We started turning them into executable.  Errors occurred during the build in a File I/O vi.  This was resolved by copying the diagram into a new vi.  This seemed odd given that it was the same vi.  Any thoughts on this?
There are problems with the program operation once we create and run the .exe.  The vi runs fine.  Hum? Some of the issues are......  (1) some of the setup .vi for our test equipment no longer setup the equipment correctly (2) sub .vis that were set to show must be set in the vi properties of the vi instead of in the calling vi.  I've read that the executable run quicker than the vi.  ....most of our communication to instruments is through GPIB.  Are there any suggestions on how to control timing when using GPIB?
THANK YOU!

Why can't I run an executable created in LabVIEW 2009 and later, and how do I fix it?
Theres a good KB article that should set you straight.
Jeff

Similar Messages

  • LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows - Supported Features

    Hi,
    Can some one please point out what features are supported by the LV RTE (Minimum ) [LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows]
    1) Is there a limit on the size of the exe which can be run on it?
    2) Will this support additional modules like DAQ etc.,? Or do we have to chose the regular installer ( 170 Mb ) for that purpose?
    3) If a list of what it does or does not support is available, it would be extremely helpful.
    Thanks In advance.
    Regards,
    Vijay

    Anand, 
    I did go through both the links that you had sent earlier before posting on the forum. For eaxample refer the following link where it says,
    http://joule.ni.com/nidu/cds/view/p/lang/en/id/1599
    It does not contain the full run-time engine, but will allow some executables to run.
    1) What do they mean by 'some' executables. Is there a list of yay's and no's available?
    2) Can someone from NI reply to this and shed more knowledge?
    Regards,
    Vijay 

  • Problem installing program running with Java

    When i start to run a program appear a window witj following message: "preparing to run java virtual machine"..after that appear next small window with installshield wizard. When make a transition between this small windows to start to install the program, nothing happens it is he does not make this transition.
    I already download the new version without results.
    Do have any ideia what could be the problem.?
    Thanks
    Jorge

    Which JRE is bundle inside your application ?
    Is it International or US only ??
    I have a reason to believe that US version is
    throwing NullPointerException when installing it
    on windows 2000 server
    When you starting the installer, The installer is unpacking the JRE - so check which directory it expanded and than Try running java.exe from the JRE that was installed.
    Maybe its currupted, You dont need to run any code
    even if your run java.exe without anything the
    exception is thrown
    If exception is thrown try the international version of JRE

  • Will oracle 8.3.7 Pro *c Programs run with 10g?

    Hi all,
    This may not be suitable for this forum but please advise me
    We are planning to upgrade the oracle 8.3.7 to 10grel2
    This is in AIX 4.3.We got MQSeries version 5.2 installed.
    Our PRO *C programs are compiled in 8.3.7..
    will the PRO *C programs will run and communicate with 10g.We receive messages from MQ and manipulate the database.
    Will the existing programs run with 10g
    Help needed URGENT
    Thanks

    Your Pro*C will need to be version 9.2 compliant, to run against 10g so may need some reworking. See here for more detail:
    http://oraclesvca2.oracle.com/docs/cd/B14117_01/win.101/a96111.pdf

  • Why does my .exe file run on the PC I created it on, which has LV installed, but it will not run on a PC which does not have LV installed?

    I am trying to run a stand alone application on a PC which does not have Lab View installed. I created the executable file and the installer. However, when I run the .exe the VISA functions contained in the VI return error messages and the power supply I am trying to control does not respond. The stand alone application will run on a PC that has Lab View installed. 
    My application initially used a VISA resource control to selct the instrument GPIB address on the PC I used to create the application. Since the PC I am trying to run the .exe on has an older version of NI-MAX I cannot create aliases that the VISA control can interpret.I have tried to upgrade NI-MAX hoping that would solve my problem:
    Here is what I tried:
    uninstall NI-488 and NI-MAX ( if you want to uninstall MAX you must uninstall NI-488 ) reinstall NI-488 and NI-MAX Ver 3.1 then try to install NI-MAX version 4.1 which I downloaded from NI website. When I do this I get an error message when I try to run MAX. None of this worked so I hard coded the instrument address as a constant and again that works on the PC with LV installed but does not on the PC without LV.
    Any input would be greatly appreciated.

    It looks like you do have the LabVIEW runtime engine installed.  It might be that the VISA drivers you have are not compatible versions.  In NIMAX, look under software to see what versions of VISA software you have installed on both systems.
    It does not matter what version of NI MAX you have installed, since your application does not use NI MAX.  NI MAX only helps you look at (or simulate) the hardware and software you have on your system.
    One thing you could do is include drivers and the runtime engine while creating your installer.  That way, you should be able to do a complete install on a clean system.
    Message Edited by Sudhir Gopinath on 06-19-2007 12:26 PM
    S G
    Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor

  • Program Files (x86) 32 bit iexplore.exe does not work--how do I fix/install

    HP Pavilion Model #: p6404y
    Product #: BK168AA-ABA
    Software Build #: A1NAv6PrA6
    OS: Windows 7 Home Edition 64 bit
    Error Message:  Installation Error
    Problem/Issue:  when attempting to activacte new Anti-virus program I purchased, the system is trying to use Internet Explorer in the Program Files (x86) 32 bit iexplore.exe (that does not work).  The 64 bit -  Program Files/Internet Explorer/iexplore.exe does work... How do I fix/install 32 bit version of IE back to my system (in this directory)? 

    Hi,
    Try the following.
    Click the Start Menu and select Control Panel.  Open Programs and Features, Click 'Turn Windows features on or off' and remove the tick next to Internet Explorer 9  Click Yes then OK and then when done, restart the PC.
    When Windows has restarted, click the Start Menu and select Control Panel.  Open Programs and Features, Click 'Turn Windows features on or off' and re-enter the tick next to Internet Explorer 9.  Click Yes then OK and when this has finished installing, restart the PC again.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I am trying to uninstall a program that is running in the background but does not show when I force quit.  How do I remove it?

    How do I uninstall a program that is running in the background but does not show in Force Quit?

    Open Activity Monitor and look for the program.  Select it and Quit or Force quit it from within Acitiviy Monitor.
    Search for the application with Find Any File as it can search areas that Spotlight can't, like invisible folders, system folders and packages.  You can drag the app and any associated files from the search result window to the Trash bin in the Dock.
    OT

  • When I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected   the install then rolls back   I have tried  rein

    when I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected   the install then rolls back   I have tried  reinstall   deleting files signing on with another account etc  nothing works   I have read this is an apple programing problem  if so is there a fix  I need iclouds  thanks

    This other discussion may help: Re: how do I install icloud

  • Graphical mapping issue with useOneAsMany if segment does not exist

    Hi all
    I have an issue with graphical mapping in an IDoc to file scenario. I need to have header level fields mapped to line item fields. Whether or not and how many source header segments of the same type exist depends on a qualifier (QUALF). This is generally working if I use the following graphical mapping:
    if QUALF = 001 then <source>  ->  removeContext  ->  useOneAsMany  ->  splitByValue  ->  <target>
    ... with setting QUALF, <source>, and the second input for the useOneAsMany to the highest possible context node.
    Nevertheless, if the segment with the qualifier 001 does not exist in the source then the mapping throws the error "Too few values in first queue in fuction useOneAsMany". Whatever I've tried, the mapping wants to execute the useOneAsMany statement anyway and I haven't found a way to omit this. Whether the target would be created with an empty value or not created at all would be secondary. Would eventually somebody have a solution to this problem?
    Thanks in advance,
    Daniel

    Daniel,
    try using mapWithDefault function before useAsmany
    if QUALF = 001 then <source> -> removeContext -> <b>MapwithDefault</b>->useOneAsMany -> splitByValue -> <target>
    I think it takes care even if the value occur in the contaxt or.
    Babu

  • Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery.  But I got more time out of running with my iPhone. Does this sound normal? I thought I sh

    Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery.  But I got more time out of running with my iPhone. Does this sound normal? I thought I should get close to 30 hrs of just play time alone.
    ALso, my wife got me the Belkin armband to run with the nano but I sweat through the band resulting in the back of the iPod to get wet. Surely this is not good. Anyone have a recommendation for an armband that keeps moisture away from the pod?

    iPod Nano are small and they don't use Wi-Fi access so you get less power time on a Nano. As for iPhone, since you got apps, Wi-Fi + 3G access, and everything else, they give you more time so you can keep using. Nanos are ment to listen to music, listen to radio, view your photos, watch videos (without Wi-Fi) and since you got BlueTooth on the nano, it counts as wireless access so it drains your battery faster.

  • AdobeDownloadAssistant.exe does not run

    AdobeDownloadAssistant.exe does not run on my computer? What can I do? Thanks

    Hi PizarrasyPizarrones,
    Please refer the solution in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
    If you continue to face difficulties you can try initiating a direct download by following the steps listed at http://forums.adobe.com/thread/981369
    Regards,
    Rave

  • Tasklist.exe does not list all Modules in Windows 7 64-bit

    tasklist.exe does not list all Modules in Windows 7 64-bit.
    If I want to look at the DLLs loaded by Excel, I would type:
      tasklist /M /fi "imagename eq excel.exe"
    When I run this in XP or 32-bit Win7, it works fine, showing all the dlls loaded by excel.  However, in 64-bit windows, it does NOT show all dlls - only a limited subset.  If I use Process Explorer, I can still see all the DLLs loaded by excel,
    but that is useless for writing automated scripts.
    To check this out, try looking for kernel32.dll - it is always loaded by Excel, but tasklist does not display it in 64-bit Win7:
       tasklist /M kernel32.dll /fi "imagename eq excel.exe"
    So, since tasklist is broken, is there a good (command-line) way of looking at what dlls are loaded by a process?
    (Originally posted
    here)

    Have a look at ListDLLs, also from SysInternals.
    http://technet.microsoft.com/en-us/sysinternals/bb896656
    Example with Firefox
    Microsoft Windows [Version 6.2.7989]
    Copyright (c) 2011 Microsoft Corporation.  All rights reserved.
    C:\Users\Cyclops>cd downloads
    C:\Users\Cyclops\Downloads>cd ListDlls
    C:\Users\Cyclops\Downloads\ListDlls>listdlls firefox
    ListDLLs v3.0 - DLL lister for Win9x/NT
    Copyright (C) 1997-2010 Mark Russinovich
    Sysinternals - www.sysinternals.com
    firefox.exe pid: 3544
    Command line: "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
      Base                Size      Version         Path
      0x0000000000c60000  0xe0000   5.0.0.4183  C:\Program Files (x86)\Mozilla Firef
    ox\firefox.exe
      0x000000002a960000  0x1a9000  6.2.7989.0  C:\Windows\SYSTEM32\ntdll.dll
      0x0000000077a30000  0x43000   6.2.7989.0  C:\Windows\SYSTEM32\wow64.dll
      0x00000000779c0000  0x57000   6.2.7989.0  C:\Windows\system32\wow64win.dll
      0x0000000077a20000  0x8000    6.2.7989.0  C:\Windows\system32\wow64cpu.dll
      0x0000000000c60000  0xe0000   5.0.0.4183  C:\Program Files (x86)\Mozilla Firef
    ox\firefox.exe
      0x0000000077a80000  0x180000  6.2.7989.0  C:\Windows\SysWOW64\ntdll.dll
      0x0000000075860000  0x120000  6.2.7989.0  C:\Windows\SysWOW64\KERNEL32.DLL
      0x0000000076060000  0x98000   6.2.7989.0  C:\Windows\SysWOW64\KERNELBASE.dll
      0x0000000075480000  0x68000   6.2.7989.0  C:\Windows\SysWOW64\apphelp.dll
      0x0000000071330000  0xdcf000  5.0.0.4183  C:\Program Files (x86)\Mozilla Firef
    ox\xul.dll
      0x0000000071320000  0x7000    5.0.0.4183  C:\Program Files (x86)\Mozilla Firef
    ox\xpcom.dll
      0x0000000071310000  0x6000    5.0.0.4183  C:\Program Files (x86)\Mozilla Firef
    ox\mozalloc.dll
      0x00000000712d0000  0x31000   4.8.8.0  C:\Program Files (x86)\Mozilla Firefox\
    nspr4.dll
      0x00000000712c0000  0x7000    4.8.8.0  C:\Program Files (x86)\Mozilla Firefox\
    plc4.dll
      0x0000000076370000  0x150000  6.2.7989.0  C:\Windows\SysWOW64\USER32.dll
      0x0000000075630000  0x7000    6.2.7989.0  C:\Windows\SysWOW64\VERSION.dll
      0x0000000071210000  0xaf000   8.0.0.0  C:\Program Files (x86)\Mozilla Firefox\
    MOZCRT19.dll
      0x0000000071150000  0xbe000   3.7.5.0  C:\Program Files (x86)\Mozilla Firefox\
    mozsqlite3.dll
      0x0000000070f80000  0x1c2000                  C:\Program Files (x86)\Mozilla F
    irefox\mozjs.dll
      0x0000000070f60000  0x18000   3.12.9.0  C:\Program Files (x86)\Mozilla Firefox
    \smime3.dll
      0x0000000070f30000  0x21000   3.12.9.0  C:\Program Files (x86)\Mozilla Firefox
    \ssl3.dll
      0x0000000070e90000  0x9d000   3.12.9.0  C:\Program Files (x86)\Mozilla Firefox
    \nss3.dll
      0x0000000070e70000  0x14000   3.12.9.0  C:\Program Files (x86)\Mozilla Firefox
    \nssutil3.dll
      0x0000000070e60000  0x7000    4.8.8.0  C:\Program Files (x86)\Mozilla Firefox\
    plds4.dll
      0x0000000075fd0000  0x90000   6.2.7989.0  C:\Windows\SysWOW64\GDI32.dll
      0x0000000075180000  0x1d000   6.2.7989.0  C:\Windows\SysWOW64\WINMM.dll
      0x0000000075050000  0x7000    6.2.7989.0  C:\Windows\SysWOW64\WSOCK32.dll
      0x0000000077920000  0x9e000   6.2.7989.0  C:\Windows\SysWOW64\ADVAPI32.dll
      0x0000000076790000  0xd99000  6.2.7989.0  C:\Windows\SysWOW64\SHELL32.dll
      0x0000000075ee0000  0xe7000   6.2.7989.0  C:\Windows\SysWOW64\ole32.dll
      0x00000000755d0000  0x51000   6.2.7989.0  C:\Windows\SysWOW64\WINSPOOL.DRV
      0x0000000076630000  0x78000   6.2.7989.0  C:\Windows\SysWOW64\COMDLG32.dll
      0x00000000765d0000  0x60000   6.2.7989.0  C:\Windows\SysWOW64\IMM32.dll
      0x0000000074170000  0x5000    6.2.7989.0  C:\Windows\SysWOW64\MSIMG32.dll
      0x0000000076100000  0x63000   6.2.7989.0  C:\Windows\SysWOW64\SHLWAPI.dll
      0x00000000777b0000  0x5000    6.2.7989.0  C:\Windows\SysWOW64\PSAPI.DLL
      0x0000000075e90000  0x45000   6.2.7989.0  C:\Windows\SysWOW64\WS2_32.dll
      0x00000000766b0000  0xaa000   1.626.7989.0  C:\Windows\SysWOW64\USP10.dll
      0x0000000075a60000  0x88000   6.2.7989.0  C:\Windows\SysWOW64\OLEAUT32.dll
      0x0000000070db0000  0xaf000   8.0.0.0  C:\Program Files (x86)\Mozilla Firefox\
    MOZCPP19.dll
      0x0000000076520000  0xaf000   7.0.7989.0  C:\Windows\SysWOW64\msvcrt.dll
      0x00000000764e0000  0xa000    6.2.7989.0  C:\Windows\SysWOW64\LPK.dll
      0x00000000750d0000  0x1d000   6.2.7989.0  C:\Windows\SysWOW64\WINMMBASE.dll
      0x0000000076760000  0x2b000   6.2.7989.0  C:\Windows\SysWOW64\sechost.dll
      0x0000000076170000  0xf0000   6.2.7989.0  C:\Windows\SysWOW64\RPCRT4.dll
      0x0000000075af0000  0x100000  6.2.7989.0  C:\Windows\SysWOW64\combase.dll
      0x00000000744d0000  0x1b4000  6.10.7989.0  C:\Windows\WinSxS\x86_microsoft.win
    dows.common-controls_6595b64144ccf1df_6.0.7989.0_none_20f19b7e40a076fb\COMCTL32.
    dll
      0x00000000776c0000  0xd4000   6.2.7989.0  C:\Windows\SysWOW64\MSCTF.dll
      0x00000000777a0000  0x6000    6.2.7989.0  C:\Windows\SysWOW64\NSI.dll
      0x0000000075650000  0x60000   6.2.7989.0  C:\Windows\SysWOW64\SspiCli.dll
      0x0000000075640000  0xc000    6.2.7989.0  C:\Windows\SysWOW64\CRYPTBASE.dll
      0x00000000751a0000  0xc0000   6.2.7989.0  C:\Windows\SysWOW64\uxtheme.dll
      0x0000000075110000  0x13000   6.2.7989.0  C:\Windows\SysWOW64\dwmapi.dll
      0x0000000070c90000  0x11e000  6.2.7989.0  C:\Windows\SysWOW64\dwrite.dll
      0x0000000070b70000  0x112000  6.2.7989.0  C:\Windows\SysWOW64\dbghelp.dll
      0x00000000756b0000  0x1ac000  6.2.7989.0  C:\Windows\SysWOW64\SETUPAPI.dll
      0x0000000075a20000  0x32000   6.2.7989.0  C:\Windows\SysWOW64\CFGMGR32.dll
      0x0000000075980000  0x12000   6.2.7989.0  C:\Windows\SysWOW64\DEVOBJ.dll
      0x00000000759b0000  0x6d000   2001.12.8919.0  C:\Windows\SysWOW64\clbcatq.dll
      0x0000000072b60000  0x12a000  7.0.7989.0  C:\Windows\SysWOW64\propsys.dll
      0x00000000755a0000  0x21000   6.2.7989.0  C:\Windows\SysWOW64\ntmarta.dll
      0x0000000075d20000  0x43000   6.2.7989.0  C:\Windows\SysWOW64\WLDAP32.dll
      0x0000000075080000  0x1a000   6.2.7989.0  C:\Windows\SysWOW64\iphlpapi.dll
      0x0000000075060000  0x7000    6.2.7989.0  C:\Windows\SysWOW64\WINNSI.DLL
      0x0000000010000000  0x51000   1.0.118.0  C:\Program Files (x86)\Common Files\P
    C Tools\Lsp\PCTLsp.dll
      0x0000000073490000  0x46000   6.2.7989.0  C:\Windows\SysWOW64\mswsock.dll
      0x0000000072a30000  0x5000    6.2.7989.0  C:\Windows\SysWOW64\wshtcpip.dll
      0x0000000070b40000  0x21000   5.0.0.4183  C:\Program Files (x86)\Mozilla Firef
    ox\components\browsercomps.dll
      0x00000000764f0000  0x30000   6.2.7989.0  C:\Windows\SysWOW64\WINTRUST.dll
      0x0000000076260000  0x110000  6.2.7989.0  C:\Windows\SysWOW64\CRYPT32.dll
      0x0000000075e00000  0xc000    6.2.7989.0  C:\Windows\SysWOW64\MSASN1.dll
      0x0000000070b10000  0x27000   6.2.7989.0  C:\Windows\SysWOW64\d3d10_1.dll
      0x0000000070ad0000  0x3c000   6.2.7989.0  C:\Windows\SysWOW64\d3d10_1core.dll
      0x0000000070a80000  0x42000   6.2.7989.0  C:\Windows\SysWOW64\dxgi.dll
      0x0000000070910000  0x16a000  6.2.7989.0  C:\Windows\SysWOW64\d3d11.dll
      0x00000000708f0000  0x1d000   6.2.7989.0  C:\Windows\SysWOW64\t2embed.dll
      0x00000000725a0000  0x103000  6.2.7989.0  C:\Windows\SysWOW64\WindowsCodecs.dl
    l
      0x00000000750c0000  0xb000    6.2.7989.0  C:\Windows\SysWOW64\profapi.dll
      0x0000000072560000  0x32000   6.2.7989.0  C:\Windows\SysWOW64\EhStorShell.dll
      0x0000000074fb0000  0xd000    6.2.7989.0  C:\Windows\SysWOW64\WTSAPI32.dll
      0x0000000072540000  0x1b000   6.2.7989.0  C:\Windows\SysWOW64\POWRPROF.dll
      0x0000000072510000  0x23000   6.2.7989.0  C:\Windows\SysWOW64\POWRBASE.dll
      0x0000000072490000  0x74000   6.2.7989.0  C:\Windows\SysWOW64\ntshrui.dll
      0x0000000074ca0000  0x17000   6.2.7989.0  C:\Windows\SysWOW64\CRYPTSP.dll
      0x0000000074c60000  0x3b000   6.2.7989.0  C:\Windows\SysWOW64\rsaenh.dll
      0x00000000748f0000  0xf000    6.2.7989.0  C:\Windows\SysWOW64\napinsp.dll
      0x00000000734f0000  0x13000   6.2.7989.0  C:\Windows\SysWOW64\pnrpnsp.dll
      0x00000000734e0000  0xf000    6.2.7989.0  C:\Windows\SysWOW64\NLAapi.dll
      0x0000000074a60000  0x61000   6.2.7989.0  C:\Windows\SysWOW64\DNSAPI.dll
      0x0000000073480000  0x8000    6.2.7989.0  C:\Windows\SysWOW64\winrnr.dll
      0x0000000072310000  0x7b000   6.2.7989.0  C:\Windows\SysWOW64\mscms.dll
      0x0000000075130000  0xf000    6.2.7989.0  C:\Windows\SysWOW64\USERENV.dll
      0x00000000722d0000  0x3a000   6.2.7989.0  C:\Windows\SysWOW64\icm32.dll
      0x00000000708b0000  0x3f000                   C:\Program Files (x86)\NVIDIA Co
    rporation\3D Vision\Nv3DVStreaming.dll
      0x0000000072dd0000  0xa3000   9.0.30729.5491  C:\Windows\WinSxS\x86_microsoft.
    vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.5491_none_50964dbabcb53b28\MSVCR90.dll
      0x0000000070650000  0x25d000  8.17.12.7533  C:\Windows\SysWOW64\nvapi.dll
      0x00000000703c0000  0x28c000  6.2.7989.0  C:\Windows\SysWOW64\explorerframe.dl
    l
      0x0000000070370000  0x4f000   6.2.7989.0  C:\Windows\SysWOW64\DUser.dll
      0x0000000070260000  0x109000  6.2.7989.0  C:\Windows\SysWOW64\DUI70.dll
      0x0000000072a20000  0x5000    6.2.7989.0  C:\Windows\SysWOW64\wship6.dll
      0x0000000070230000  0x27000   3.12.9.0  C:\Program Files (x86)\Mozilla Firefox
    \softokn3.dll
      0x0000000070210000  0x18000   3.12.9.0  C:\Program Files (x86)\Mozilla Firefox
    \nssdbm3.dll
      0x00000000701c0000  0x44000   3.12.9.0  C:\Program Files (x86)\Mozilla Firefox
    \freebl3.dll
      0x0000000070160000  0x52000   1.81.0.0  C:\Program Files (x86)\Mozilla Firefox
    \nssckbi.dll
      0x0000000073430000  0x6000    6.2.7989.0  C:\Windows\SysWOW64\rasadhlp.dll
      0x0000000073440000  0x3b000   6.2.7989.0  C:\Windows\SysWOW64\fwpuclnt.dll
      0x0000000070150000  0xb000    6.2.7989.0  C:\Windows\SysWOW64\feclient.dll
      0x000000006fdf0000  0x1e8000  6.2.7989.0  C:\Windows\SysWOW64\d3d9.dll
      0x000000006f270000  0xb7f000  8.17.12.7533  C:\Windows\SysWOW64\nvd3dum.dll
      0x0000000009a50000  0x28000   7.17.12.7533  C:\Program Files (x86)\NVIDIA Corp
    oration\3D Vision\nvStereoApiI.dll
      0x000000000b920000  0x93000   7.17.12.7533  C:\Program Files (x86)\NVIDIA Corp
    oration\3D Vision\nvSCPAPI.dll
      0x0000000070080000  0x30000   6.2.7989.0  C:\Windows\SysWOW64\shdocvw.dll
      0x0000000070070000  0x8000    6.2.7989.0  C:\Windows\SysWOW64\LINKINFO.dll
      0x0000000070050000  0x1a000   6.2.7989.0  C:\Windows\SysWOW64\srvcli.dll
      0x0000000070040000  0xb000    6.2.7989.0  C:\Windows\SysWOW64\cscapi.dll
      0x0000000070000000  0x1a000   6.2.7989.0  C:\Windows\SysWOW64\thumbcache.dll
      0x0000000075bf0000  0x12c000  9.0.7989.0  C:\Windows\SysWOW64\urlmon.dll
      0x0000000077530000  0x182000  9.0.7989.0  C:\Windows\SysWOW64\iertutil.dll
      0x00000000777c0000  0x160000  9.0.7989.0  C:\Windows\SysWOW64\WININET.dll
      0x00000000764c0000  0x1d000   6.2.7989.0  C:\Windows\SysWOW64\bcrypt.dll
      0x00000000759a0000  0x3000    6.2.7989.0  C:\Windows\SysWOW64\Normaliz.dll
      0x0000000072b50000  0x8000    6.2.7989.0  C:\Windows\SysWOW64\Secur32.dll
      0x0000000074b20000  0x5b000   6.2.7989.0  C:\Windows\SysWOW64\winhttp.dll
      0x0000000074ad0000  0x4e000   6.2.7989.0  C:\Windows\SysWOW64\webio.dll
      0x0000000072950000  0x4f000   6.2.7989.0  C:\Windows\SysWOW64\RASAPI32.dll
      0x0000000072930000  0x14000   6.2.7989.0  C:\Windows\SysWOW64\rasman.dll
      0x0000000072920000  0xc000    6.2.7989.0  C:\Windows\SysWOW64\rtutils.dll
      0x0000000072910000  0x6000    6.2.7989.0  C:\Windows\SysWOW64\sensapi.dll
      0x000000006e780000  0x4d000   1.0.0.1  C:\Windows\SysWOW64\Wpc.dll
      0x000000006e730000  0x45000   6.2.7989.0  C:\Windows\SysWOW64\wevtapi.dll
      0x0000000075170000  0xf000    6.2.7989.0  C:\Windows\SysWOW64\samcli.dll
      0x000000006e710000  0x11000   6.2.7989.0  C:\Windows\SysWOW64\SAMLIB.dll
      0x000000006e700000  0x9000    6.2.7989.0  C:\Windows\SysWOW64\netutils.dll
      0x000000006e690000  0xf000    6.2.7989.0  C:\Program Files (x86)\Windows Defen
    der\MpOav.dll
    C:\Users\Cyclops\Downloads\ListDlls> 
    Comparison with Tasklist
    Microsoft Windows [Version 6.2.7989]
    Copyright (c) 2011 Microsoft Corporation.  All rights reserved.
    C:\Users\Cyclops>tasklist /m /fi "imagename eq firefox.exe"
    Image Name                     PID Modules
    ========================= ======== ============================================
    firefox.exe                   3544 ntdll.dll, wow64.dll, wow64win.dll,
                                       wow64cpu.dll
    C:\Users\Cyclops>

  • Job Cancelled with an error "Data does not match the job def: Job terminat"

    Dear Friends,
    The following job is with respect to an inbound interface that transfers data into SAP.
    The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
    The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
    1.Job   Started                                                                               
    2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)                           
    3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
    4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.                                   
    5.File mist.txt read from /data/sap/ARD/interface/FI/work/.                                    
    6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)  
    7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)    
    8.Job cancelled after system exception
    ERROR_MESSAGE                                                
    Could you please analyse and come up about under what circumstance the above error is reported.
    As well I heard that because of the customization issues in T.Code BMV0, the above error has raised. 
    Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
    My Trials
    1. Tested uplaoding an empty file
    2. Tested uploading with wrong data
    3. Tested uploading with improper data that has false file structue
    But failed to simulate the above scenario.
    Clarification Required
    Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
    Is the above question valid?
    Edited by: dharmendra gali on Jan 28, 2008 6:06 AM

    Dear Friends,
    _Urgent : Please work on this ASAP _
    The following job is with respect to an inbound interface that transfers data into SAP.
    The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
    The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
    1.Job Started
    2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
    3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
    4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
    5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
    6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
    7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
    8.Job cancelled after system exception
    ERROR_MESSAGE
    Could you please analyse and come up about under what circumstance the above error is reported.
    As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
    Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
    My Trials
    1. Tested uplaoding an empty file
    2. Tested uploading with wrong data
    3. Tested uploading with improper data that has false file structue
    But failed to simulate the above scenario.
    Clarification Required
    Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
    Is the above question valid?

  • Solution for Windows Store app "projectname.exe" does not contain a static 'Main' method suitable for an entry point . Error.

    Hi,
    I'm developed a blog reader for windows 8 store app. It was perfectly worked before. But suddenly it started to miss behave and I got an
    error. No other errors were there other than that.
    Error 
    Program c:\Users\.........\Desktop\Blog_Reader\Blog_Reader\obj\Release\intermediatexaml\Blog_Reader.exe' does not contain a static 'Main'
    method suitable for an entry point. 
    C:\Users\..........\Desktop\Blog_Reader\Blog_Reader\CSC    Blog_Reader
    But I found the solution while I fixing it.
    Solution for that is like below.
    Go to your App.Xaml and Right-Click thenGo to Properties
    Check whether the Build Action is
    ApplicationDefinition
    If not change it to ApplicationDefinition.
    Clean the code (solution) and Deploy
    Now the error is fiexed.

    Hi Robana, 
    Good sharing on the Technet. 
    This will definitely benefit other who may encounter the same issue as yours.
    Thanks for your sharing again. 
    Kate Li
    TechNet Community Support

  • Syncronizing my 3gs with itunes the sync does not finish because itunes allways crash and stuck i made some troubleshoots like reinstall again but nothing and my itunes is update and the system is windows vista home premium.Please help me...

    Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not  acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
    My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
    Please help me.

    I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
    You asked what I meant about saving the installer on your PC.
    When you go to the iTunes download page:
    http://www.apple.com/itunes/download/
    And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
    After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
    It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
    I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
    The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
    The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts.

Maybe you are looking for