Labview 2009 x32 and x64 installation error on windows 7 x64
When attempting to install the evaluation version of labview installed by clicking the try labview for free link on ni.com, I am experiencing an installation error.
the full error is shown in the attachment below, and is as follows;
The NI VC2005MSMs x64 installation has failed with the following error.
Error 1935. An error occured during the installation of assembly 'policy.8.0.Microsoft.VC80.OpenMP, type="win32_policy",version="8.0.50727.762".publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please refer to Help and Support for more information.
processor is an INTEL core 2 duo
running windows 7 x64
The above error occurs with both 32 and 64 bit versions. I belive I have installed this version of labview on this computer before.
Thanks
David
Solved!
Go to Solution.
Attachments:
labview_error.jpg 48 KB
Why Does My LabVIEW Installation Fail With Error 1935?
Also see this discussion
Similar Messages
-
Hi guys,
I have a favor to ask : May somebody would be nice enough to open this Labview 2009 VI and save it in a Labview 8.6 readable VI ? You'll probably have some missing blocks cause I use specials ones but I don't want to have to re-make all the VI.
Thanks you very much
G.
Solved!
Go to Solution.
Attachments:
Control3.vi 29 KBnotimperial wrote:
Probably not the right place to do this, but could someone onpen this in labview 2010 and save it in a format compatible with labview 2009?
Thank you in advance
You are right we have a thread for this here.
http://forums.ni.com/t5/LabVIEW/Downconvert-VI-Requests/m-p/1067229
Here is your vi please use the downconvert thread next time.
Tim
Johnson Controls
Holland Michigan
Attachments:
WFMreaderIII.vi 53 KB -
Oracle Apps R12 Installation error on windows
This new discussion is related to below link as last times discussion is locked ,i dont have idea why that discussion is locked(might be due to attachment link that i provided for log file )
"R12 E-Business suite installation error on Windows XP-SP3"
I have added 4 GB RAM and started installation on new fresh windows XP SP3 system with only one C: drive with 300 GB space(including staging area)
below is the log file for error
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 12.1.1.9
>> Install session started : Sun Jan 12 14:57:39 IST 2014
>> Rapid Wizard source location : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
>> Command Line arguments for this run :
=================================================================
Install Session Information
Host Name : utkarsh.sparsh
Host Operating System : Windows (32-bit)
User running Install : Uday Gite
=================================================================
InstUpgPanel
User action : Install Oracle Applications
Install type : Standard Install
Disabling OCM Configuration
InstallPanel
User action : Create configuration
Description : Creates a new instance configuration.
PortPanel
Selected port pool:
Database Port : 1521
RPC Port : 1626
Web SSL Port : 4443
ONS Local Port : 6100
ONS Remote Port : 6200
ONS Request Port : 6500
Web Listener Port : 8000
Active Web Port : 8000
Forms Port : 9000
Metrics Server Data Port : 9100
Metrics Server Request Port : 9200
JTF Fulfillment Server Port : 9300
MSCA Server Port : 10200-10205
MCSA Telnet Server Port : 10200,10202,10204
MSCA Dispatcher Port : 10800
Java Object Cache Port : 12345
OC4J JMS Port Range for Oacore : 23000-23004
OC4J JMS Port Range for Forms : 23500-23504
OC4J JMS Port Range for Home : 24000-24004
OC4J JMS Port Range for Oafm : 24500-24504
OC4J AJP Port Range for Oacore : 21500-21504
OC4J AJP Port Range for Forms : 22000-22004
OC4J AJP Port Range for Home : 22500-22504
OC4J AJP Port Range for Oafm : 25000-25004
OC4J RMI Port Range for Oacore : 20000-20004
OC4J RMI Port Range for Forms : 20500-20504
OC4J RMI Port Range for Home : 21000-21004
OC4J RMI Port Range for Oafm : 25500-25504
DB ONS Local Port : 6300
DB ONS Remote Port : 6400
Oracle Connection Manager Port : 1521
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
DBNodePanel
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
AppsNodePanel
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
AppsNodePanel
AllNodesPanel
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Writing configuration file to: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Writing configuration file to: C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Setting temp directory to: C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
Port Availability Check :
-- database node ports --
Database Port available: Port Value = 1521
Database Port Value = 1521...... Available
DB ONS Local Port available: Port Value = 6300
DB ONS Local Port Value = 6300...... Available
DB ONS Remote Port available: Port Value = 6400
DB ONS Remote Port Value = 6400...... Available
-- apps node ports --
RPC Port available: Port Value = 1626
RPC Port Value = 1626...... Available
Web SSL Port available: Port Value = 4443
Web SSL Port Value = 4443...... Available
ONS Local Port available: Port Value = 6100
ONS Local Port Value = 6100...... Available
ONS Remote Port available: Port Value = 6200
ONS Remote Port Value = 6200...... Available
ONS Request Port available: Port Value = 6500
ONS Request Port Value = 6500...... Available
Web Listener Port available: Port Value = 8000
Web Listener Port Value = 8000...... Available
Forms Port available: Port Value = 9000
Forms Port Value = 9000...... Available
Metrics Server Data Port available: Port Value = 9100
Metrics Server Data Port Value = 9100...... Available
Metrics Server Request Port available: Port Value = 9200
Metrics Server Request Port Value = 9200...... Available
JTF Fulfillment Server Port available: Port Value = 9300
JTF Fulfillment Server Port Value = 9300...... Available
MSCA Server Port available: Port Value = 10200
MSCA Server Port available: Port Value = 10201
MSCA Server Port available: Port Value = 10202
MSCA Server Port available: Port Value = 10203
MSCA Server Port available: Port Value = 10204
MSCA Server Port available: Port Value = 10205
MSCA Server Port Value = 10200-10205...... Available
MSCA Dispatcher Port available: Port Value = 10800
MSCA Dispatcher Port Value = 10800...... Available
Java Object Cache Port available: Port Value = 12345
Java Object Cache Port Value = 12345...... Available
OC4J JMS Port Range for Oacore available: Port Value = 23000
OC4J JMS Port Range for Oacore available: Port Value = 23001
OC4J JMS Port Range for Oacore available: Port Value = 23002
OC4J JMS Port Range for Oacore available: Port Value = 23003
OC4J JMS Port Range for Oacore available: Port Value = 23004
OC4J JMS Port Range for Oacore Value = 23000-23004...... Available
OC4J JMS Port Range for Forms available: Port Value = 23500
OC4J JMS Port Range for Forms available: Port Value = 23501
OC4J JMS Port Range for Forms available: Port Value = 23502
OC4J JMS Port Range for Forms available: Port Value = 23503
OC4J JMS Port Range for Forms available: Port Value = 23504
OC4J JMS Port Range for Forms Value = 23500-23504...... Available
OC4J JMS Port Range for Home available: Port Value = 24000
OC4J JMS Port Range for Home available: Port Value = 24001
OC4J JMS Port Range for Home available: Port Value = 24002
OC4J JMS Port Range for Home available: Port Value = 24003
OC4J JMS Port Range for Home available: Port Value = 24004
OC4J JMS Port Range for Home Value = 24000-24004...... Available
OC4J JMS Port Range for Oafm available: Port Value = 24500
OC4J JMS Port Range for Oafm available: Port Value = 24501
OC4J JMS Port Range for Oafm available: Port Value = 24502
OC4J JMS Port Range for Oafm available: Port Value = 24503
OC4J JMS Port Range for Oafm available: Port Value = 24504
OC4J JMS Port Range for Oafm Value = 24500-24504...... Available
OC4J AJP Port Range for Oacore available: Port Value = 21500
OC4J AJP Port Range for Oacore available: Port Value = 21501
OC4J AJP Port Range for Oacore available: Port Value = 21502
OC4J AJP Port Range for Oacore available: Port Value = 21503
OC4J AJP Port Range for Oacore available: Port Value = 21504
OC4J AJP Port Range for Oacore Value = 21500-21504...... Available
OC4J AJP Port Range for Forms available: Port Value = 22000
OC4J AJP Port Range for Forms available: Port Value = 22001
OC4J AJP Port Range for Forms available: Port Value = 22002
OC4J AJP Port Range for Forms available: Port Value = 22003
OC4J AJP Port Range for Forms available: Port Value = 22004
OC4J AJP Port Range for Forms Value = 22000-22004...... Available
OC4J AJP Port Range for Home available: Port Value = 22500
OC4J AJP Port Range for Home available: Port Value = 22501
OC4J AJP Port Range for Home available: Port Value = 22502
OC4J AJP Port Range for Home available: Port Value = 22503
OC4J AJP Port Range for Home available: Port Value = 22504
OC4J AJP Port Range for Home Value = 22500-22504...... Available
OC4J AJP Port Range for Oafm available: Port Value = 25000
OC4J AJP Port Range for Oafm available: Port Value = 25001
OC4J AJP Port Range for Oafm available: Port Value = 25002
OC4J AJP Port Range for Oafm available: Port Value = 25003
OC4J AJP Port Range for Oafm available: Port Value = 25004
OC4J AJP Port Range for Oafm Value = 25000-25004...... Available
OC4J RMI Port Range for Oacore available: Port Value = 20000
OC4J RMI Port Range for Oacore available: Port Value = 20001
OC4J RMI Port Range for Oacore available: Port Value = 20002
OC4J RMI Port Range for Oacore available: Port Value = 20003
OC4J RMI Port Range for Oacore available: Port Value = 20004
OC4J RMI Port Range for Oacore Value = 20000-20004...... Available
OC4J RMI Port Range for Forms available: Port Value = 20500
OC4J RMI Port Range for Forms available: Port Value = 20501
OC4J RMI Port Range for Forms available: Port Value = 20502
OC4J RMI Port Range for Forms available: Port Value = 20503
OC4J RMI Port Range for Forms available: Port Value = 20504
OC4J RMI Port Range for Forms Value = 20500-20504...... Available
OC4J RMI Port Range for Home available: Port Value = 21000
OC4J RMI Port Range for Home available: Port Value = 21001
OC4J RMI Port Range for Home available: Port Value = 21002
OC4J RMI Port Range for Home available: Port Value = 21003
OC4J RMI Port Range for Home available: Port Value = 21004
OC4J RMI Port Range for Home Value = 21000-21004...... Available
OC4J RMI Port Range for Oafm available: Port Value = 25500
OC4J RMI Port Range for Oafm available: Port Value = 25501
OC4J RMI Port Range for Oafm available: Port Value = 25502
OC4J RMI Port Range for Oafm available: Port Value = 25503
OC4J RMI Port Range for Oafm available: Port Value = 25504
OC4J RMI Port Range for Oafm Value = 25500-25504...... Available
OS User and Group Check
Domain=UTKARSH
,Username=Uday Gite
,PC-Name=UTKARSH
User belongs to the Administrators Group.
Port Uniqueness Check :
-- database node ports --
-- apps node ports --
All ports are unique.
File System Check :
-- database node mount point --
Database ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
Database ORACLE_HOME admin folder created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\temp
Database Install Log Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\log\FPRD1_utkarsh
Database Install Out Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac
Database Install Out Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\clone\\
Database System File Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Log File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Transaction File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Archive File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database OraInventory File Directory created:
Mount Point = c:\temp
-- apps node mount point --
APPL_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP admin created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl\admin
APPL_TOP mount 2 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP mount 3 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP mount 4 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
COMMON_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn
JAVA_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn\java\classes
Temp Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp
APPL_TOP admin Install Log Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\admin\log
Apps ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3
Tools ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3\appsutil\clone\\
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2\appsutil\clone\\
Apps ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Tools ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Writing configuration file to: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
required = 5600.0
actual = 249592.6953125
Disk space on system acceptable:
Database System File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 20200.0
actual = 243992.6953125
Disk space on system acceptable:
Database Log File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 950.0
actual = 223792.6953125
Disk space on system acceptable:
Database Transaction File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 103350.0
actual = 222842.6953125
Disk space on system acceptable:
Database Archive File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 64500.0
actual = 119492.6953125
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 5800.0
actual = 54992.6953125
Disk space on system acceptable:
APPL_TOP mount 2 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 2800.0
actual = 49192.6953125
Disk space on system acceptable:
APPL_TOP mount 3 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 8400.0
actual = 46392.6953125
Disk space on system acceptable:
APPL_TOP mount 4 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 3100.0
actual = 37992.6953125
Disk space on system acceptable:
COMMON_TOP = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn
required = 3200.0
actual = 34892.6953125
Disk space on system acceptable:
Apps ORACLE_HOME = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3
required = 1400.0
actual = 31692.6953125
Disk space on system acceptable:
Tools ORACLE_HOME = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2
required = 1400.0
actual = 30292.6953125
Disk space on system acceptable:
Temp Directory = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp
required = 1024.0
actual = 28892.6953125
Host/Domain
command: ping -n 1 utkarsh
Pinging utkarsh.sparsh [10.10.12.6] with 32 bytes of data:
Reply from 10.10.12.6: bytes=32 time<1ms TTL=128
Ping statistics for 10.10.12.6:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has succeeded
command: ping -n 1 utkarsh.sparsh
Pinging utkarsh.sparsh [10.10.12.6] with 32 bytes of data:
Reply from 10.10.12.6: bytes=32 time<1ms TTL=128
Ping statistics for 10.10.12.6:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has succeeded
System Utilities
command: cmd.exe /c C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\OracleApps\Cygwin\bin C:\OracleApps\VIS2008\VC\bin
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
/cygdrive/c/WINDOWS/system32/cl
'cc' is available.
/usr/bin/link
'link' is available.
ERRORCODE = 0 ERRORCODE_ENDThe system cannot find the path specified.
System Utilities Availability test has succeeded
AllNodesPanel
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
DoInstallPanel - User continued install at warning dialog.
Starting from Rapid Install Full Stage area C:\OracleApps\stageR12\oraDB\Disk1
Exception thrown in getAllProductIDs. 0
RapidWiz location: C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
Install Media location: C:\OracleApps\stageR12\startCD\Disk1
Database ORACLE_HOME: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
Database SID: FPRD1
Database Context Name : FPRD1_utkarsh
Creating DB Context: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
Exception thrown in getAllProductIDs. 0
RapidWiz location: C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
Install Media location: C:\OracleApps\stageR12\startCD\Disk1
APPL_TOP location: C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
Database SID: FPRD1
APPL_TOP Context Name : FPRD1_utkarsh
INST_TOP location: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh
Creating Apps Context: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Total number of processes in Current Install 5
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Creation of Directory - C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh Succeeded.
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adrun11g.cmd
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
backup : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd to C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac\adrun11g.cmd
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrundb.cmd
backup : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrundb.cmd to C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac\adrundb.cmd
Step 0 of 5
Command: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
Processing Step 1 of 5
Executing: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM $Header: adrun11g.cmd 120.11 2009/03/11 21:22:03 marderiu noship $
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM ###############################################################
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM ###############################################################
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>(set date=Sun 01/12/2014 )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>(set time=03:05 PM )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 11g RDBMS : Sun 01/12/2014 03:05 PM
STARTED INSTALL PHASE : 11g RDBMS : Sun 01/12/2014 03:05 PM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>SET JRE_PATH=C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\java;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;C:\OracleApps\stageR12\startCD\Disk1\ra"R12 E-Business suite installation error on Windows XP-SP3"
Your OS is not supported.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) (Doc ID 761567.1)
Log file located at C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\log\FPRD1_utkarsh\ApplyDatabase_01121856.log
Any details about the error in this log file?
Please review log files mentioned in (How to locate the log files and troubleshoot Rapid Install for Release 12.0.x and 12.1.x (Doc ID 452120.1)) and upload them in one zip file to any free hosting website and post the link here. Please do NOT copy/paste the contents of the log files in this thread.
Thanks,
Hussein -
cannot reinstall itunes, i get this message MSVCR80.dll not found. Try to reinstall itunes and i get error 7 (Windows erro 126) help please
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
MSVCR8.dll then i click close and it says error 7 (windows error126)
I keep getting an error when i try to open Itunes on my computer, MSVCR8.dll then i click close and it says error 7 (windows error126)
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have tried uninstalling and reinstalling iTunes 15 times regarding the latest release and still get the MSVCR80.dll and Error 7 (Windows error 126) messages.
I have tried moving the dll filesincluding the QTMovie dll file to now avail. Can anyone please help, as I am sure you all, like me, have thousnads of dollars and songs invested in this system and need a fix fast. Can anyone please help???Dear avid iTunes users - I have cracked it!!!
The response from Apple/iTunes was extremely poor and did not solve the problem.
I have a look in msconfig and observed which applications/services were running - one of which was the 'Apple Application Support'
So ... I had a look at what was in this folder and found the APS Daemon.exe file causing all the trouble.
So ... I simply deleted the Apple folder found in C:\program files\common files\.
I did a restart and did not get the MSCVCR80.dll or Error 7 (windows 126) error messages.
I reinstalled the current version of iTunes (for the 16th time!)
Hey presto!!!
IT WORKED :-O Woooohooo!!!
So ... to all those smarty-pants boffin-brianiacs out there (apple/iTunes): this is how you do it!!!!!!!!!!
YOU DO NOT NEED TO UNINSTALL ALL THE APPLE/QUICKTIME OR RELATED PROGRAMS - JUST DELETE THE APPLE FOLDER IN THE C:\PROGRAM FILES DIRECTORY.
Nuff said. -
Pb labview 2009 Number and string store data in file
Hi,
I m using labview 2009 in order to save data from instruments of mesure. My program generate Charts of string data that i would like to store in a file of table data. But when i read the file i don't see the digit after the digital point. So i forgot a part of the information which are very important for me.
Futurmore before the instalation of labview 2OO9 the program was ok with labview 8.5;
What can i do to solve this problem?
Have any modification with labview 2009?
Thanks in advance for your answer.
Attachments:
Image12.png 24 KBHI,
In attachment file you will find the data before the saving operation in data file.
We see in the file after the result. We have forgot all data after the decimal point, so we forgot a part of infortion that are very important in my application.
Thanks in advance for your help
Marc
Attachments:
AFTER.txt 1 KB
before.txt 1 KB -
OBIEE 11.1.1.5 installation Error on windows 7 64 bit
Hi, I am unable to install OBIEE 11.1.1.5 in my windows 7 home premimum 64 bit laptop.
I got the following error while installation(simple installation) at 'CONFIGURE COMPONENTS' stage, can somebody help me please...
INST-08010: Error in validing the port range for auto port allocation. At Least 2 ports should be free within the range 7500-7500 for the Adminserver and Adminserver SSL
Ensure that a minimum of 2 pors are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and
INST - 08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI(WLS Managed Server, Managed Server SSL and NodeManager)
Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI(WLS Managed Server, Managed Server SSL and NodemanagerHi,
It's Port no issues. if u r going with autoportconfiguration it will refer 7001 to 7005 port. that port no are unavailable u r laptop.
solution 1:
go with manual prt configuration method and use available port(enterprise/software only install ).
solution 2: disable Mecafi antivirus --> this may use 7001 to 7005 port no. then try it again.
Note: obiee11g ok with win 7 ultimat/professional edition. it's having lot of issues with win 7 basic/home perimum edition so make sure u r version. i.e: first of all officially oracle not supporting win 7 os
FYI: certification matrix
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
Thanks
Deva -
Photosmart C4795 installation error on Windows 7 64 bits
Dear experts,
I have been facing an annoying issue while installing HP Photosmart C4700 All-in-One Printer series Full Feature Software and Driver I recently donwloaded from HP website.
During the installation process, the window suddenly closes when "applying updates". No error message is shown or anything that could tell us what went wrong, it just disappears from my screen.
I've found the following post with the exact issue as mine but different product. I tried that solution but it did not work at all for me: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-photosmart-plus-b209a-m-driver-inst...
I hope someone can give me a tip because I am really out of options here.
I appreciate any help.
Thanks,
Ricardo
This question was solved.
View Solution.Hello Ricardo,
lease try following these steps and let me know the results:
Launch the installation and follow the steps till the EULA (License Agreement) screen.
Click the 2nd link - Internet Connection Usage Settings and select No, Thanks for both of the listed questions.
Confirm the selection, accept the EULA and continue the installation which should no\w proceed further.
Plese let me know if that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Hi,
We trying to install Hyperion 11.1.1.3 components with Hyperion Strategic Finance and EPMA on 64 Bit Windows 2003 R2 Server. We are installing all components on a single server. In the installation process while checking the components, we are getting this below error message.
"component strategic finance web services cannot be installed
hfm and epma 64-bit componentscannot co-exist with 32-bit component for hsf/fdm
component performence architect dimension server services cannot be installed
hfm and epma 64-bit components cannot co-exist with 32-bit component for hsf/fdm"
Please share your valuable suggestions to go ahead with this installation,
Thanks in advance for your earliest replies
***Chinna***
Edited by: Hyperion Chinna on Jul 22, 2010 5:10 AMSrikanth,
The New Atlanta ServletExec portion of the xMII 11.5 installation is not fully compatible with 64 bit windows. Here is a good reference for you: http://www.newatlanta.com/c/support/servletexec/self_help/faq/detail?faqId=296
Regards,
Jeremy -
Photoshop Elements 12 installation error on windows causing rollback-help needed please
I am installing Photoshop Elements 12 on my windows laptop. When almost done an error occurs and it starts rollback and the installation fails. I consulted the troubleshooting guide which suggests to go to C://Program Files(x86)/Common Files/Adobe/OOBE/PDApp and delete the files PDAppFlex.swf and PDAppFlex-app.xml .I have managed to go to Program Filesx86, Common Files, Adobe, but then the folder OOBE is absent. Within the Adobe folder I have AAMUpdaterinventry, Acrobat, Acrobat PCD, Help, PCF, SL Cache and Updater6. The files suggested to delete before retrying installation are not present in any of these folders.
Has anybody any ideas on what I should do in order to complete my installation.
Thanks very much,
TimWithout proper detailed system information nobody can know what is going on. Also try to find the pertinent info from the install logs.
Mylenium -
I just tried to install latest iTunes version and install failed. A pop-up stated "iTunes was not installed correctly. Please reinstall iTunes. ERROR 7 (Windows error 1114)." I have a decent-sized iTunes library that is not backed-up to the cloud. How can I either get back to the previous iTunes version that was functioning OR install a new version without losing the Library?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
ITunes Installation Error 7 (Windows Error 126) for Windows 8
I attempted to reinstall iTunes on my PC, and now iTunes won't run. I tried uninstalling and reinstalling the program again but get the same error messages: "The program can't start because MSVCR80.dll is missing from your computer" and "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”. Any suggestions? I have Windows 8.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
ECC 6.0 SR3 AIX and ORACLE installation error - work processes dies
Hi ,
My environment is
AIX 6.1
oracle 10.2.0.2
ECC 6.0 SR3
i'm performing the installation on above mentioned system, and got stuck at a Start ABAP instance step.
instance is not coming up and all the process are starting and and then again die one by one.
In trace of all wor processess , i can see the error trace as follows:
PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c 10973]
M
M Modeinfo for User T16/M0
Full trace for work process is
trc file: "dev_w16", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid DMB
M systemid 324 (IBM RS/6000 with AIX)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 790666
M
M
M Tue Jan 6 15:41:58 2009
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc16 1 790666) [thxxhead.c 1281]
M ThInit: running on host MBDEVECC
M calling db_connect ...
C Got LIBPATH=/usr/sap/DMB/DVEBMGS00/exe:/usr/sap/DMB/DVEBMGS00/exe:/usr/lib:/lib:/usr/sap/DMB/SYS/exe/run:/oracle/client/10x_64/instantclient from environment
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x113701b30 0x11371a068 0x113719918
C Attaching to DB Server DMB (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8)
C Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
C Now '/@DMB' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x11371d268,usrhp=0x113709970)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x113701b30 0x11371a068 0x113719918
C Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
C Now 'SAPSR3/<pwd>@DMB' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance DMB is running on MBDEVECC with ORACLE version 10.2.0.2.0 since JAN 06, 2009, 15:41:46
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090106 154158 MBDEVECC
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Jan 6 15:42:00 2009
I MtxInit: 16 0 0
M SHM_PRES_BUF (addr: 0x7000000057a0000, size: 4400000)
M SHM_ROLL_AREA (addr: 0x700000140000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0x700000150000000, size: 67108864)
M SHM_ROLL_ADM (addr: 0x700000005bd4000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x700000160000000, size: 656416)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0x700000170002000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 11776 bytes (50 server) at 0x700000180000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 16 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B db_con_shm_ini: WP_ID = 16, WP_CNT = 17, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000001b0000100, size: 30000000, end: 0x7000001b1c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0x700000005e62100, size: 10240000, end: 0x700000006826100)
B dbexpbuf: Buffer EIBUF (addr: 0x700000006827108, size: 4194304, end: 0x700000006c27108)
B dbexpbuf: Buffer ESM (addr: 0x7000001c0000108, size: 4194304, end: 0x7000001c0400108)
B dbexpbuf: Buffer CUA (addr: 0x70000017300b108, size: 3072000, end: 0x7000001732f9108)
B dbexpbuf: Buffer OTR (addr: 0x7000001d0000108, size: 4194304, end: 0x7000001d0400108)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Tue Jan 6 15:42:01 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x113a30700
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fb070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fb590
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
A Attached to PXA (address 0x7000001e0000000, size 300000K)
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x113afcb80
=> Stack address = 0xfffffffffffdd60
=> Stack low = 0xfffffffffffb470
=> Stack high = 0xffffffffffff7c0
=> Stack Trace:
pthread_kill() at 0x9000000005b9450
praise() at 0x9000000005b8cac
raise() at 0x90000000002b0f0
abort() at 0x900000000094528
ab_init() at 0x1002038d0
ThrInitRunTime() at 0x1003d1864
ThStartUp2() at 0x101a9caf0
ThInit() at 0x1000e9678
ThStart() at 0x1000fe1b0
DpMain() at 0x10156c770
nlsui_main() at 0x101a99998
=> CPU Registers:
msr = 0xa00000000000d032 iar = 0x09000000005b9450
ctr = 0xffffffff000000bc lr = 0xffffffffffffffff
xer = 0x00000000ffffffff cr = 0x0000000000585000
r00 = 0xffffffffffffffff r01 = 0x0fffffffffffdd60
r02 = 0xffffffffffffffff r03 = 0x0000000000000000
r04 = 0xffffffffffffffff r05 = 0xffffffffffffffff
r06 = 0xffffffffffffffff r07 = 0xffffffffffffffff
r08 = 0xffffffffffffffff r09 = 0xffffffffffffffff
r10 = 0xffffffffffffffff r11 = 0xffffffffffffffff
r12 = 0xffffffffffffffff r13 = 0x0000000112d77bd8
r14 = 0x0000000110cf5dd8 r15 = 0x0000000110028718
r16 = 0x0000000110001ee8 r17 = 0x0000000000000000
r18 = 0x0000000000000000 r19 = 0x0000000110027538
r20 = 0x0000000110572f50 r21 = 0x0000000110572fb0
r22 = 0x0000000110572f98 r23 = 0x0000000110572f80
r24 = 0x0000000110573610 r25 = 0x0000000110000e40
r26 = 0x00000001105737c0 r27 = 0x0000000101baa950
r28 = 0x0000000112d6fe50 r29 = 0x0000000000000006
r30 = 0x0000000000000006 r31 = 0x0000000000000001
M ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux.c 935]
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 16
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_VB2WP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = 16
M mode = 0
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M Modeinfo for User T16/M0
M
M tm state = 2
M uid = 17
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = > <
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = > <
M ext_session_id = > <
M imode = 0
M mode state = 0x41
M mode clean_state = 1
M task_type = 0
M lastThFc = THFCINVA
M lastAction = TH_IACT_NO_ACTION
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 0
M async_receives = 0
M cpic_receive = 0
M em handle = 8
M roll state = 1
M abap state = 1
M em state = 3
M eg state = 1
M spa state = 1
M enq state = 0
M softcancel = 0
M cancelInitiator = ?
M clean_state = DP_DEFAULT_CLEANING
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 0
M tcode = > <
M last_wp = -1
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0x700000030532aa8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c 10973]
M
M Modeinfo for User T16/M0
M
M tm state = 2
M uid = 17
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = > <
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = > <
M ext_session_id = > <
M imode = 0
M mode state = 0x41
M mode clean_state = 1
M task_type = 0
M lastThFc = THFCINVA
M lastAction = TH_IACT_NO_ACTION
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 0
M async_receives = 0
M cpic_receive = 0
M em handle = 8
M roll state = 1
M abap state = 1
M em state = 2
M eg state = 1
M spa state = 1
M enq state = 0
M softcancel = 0
M cancelInitiator = ?
M clean_state = DP_DEFAULT_CLEANING
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 0
M tcode = > <
M last_wp = -1
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0x700000030532aa8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M
M ***LOG Q02=> wp_halt, WPStop (Workproc16 790666) [dpuxtool.c 260]
Can some one please help me.
Regards
SaurabhThis looks like some sort of resource issue. Have you looked at this post (similar issue): [JC00 instance could not start on the last phase of NW04 installation|JC00 instance could not start on the last phase of NW04 installation;?
Hope that is helpful.
J. Haynes -
Photoshop Elements 4 and 3 installation error
In 2006 I bought a wacom graphire 4 tablet including photoshop elements 4 and 3. Recently I replaced my Mac (new Mac: OS X version 10.8.4 - 2.9 GHz Intel Core 15 - 8 GB 1600 MHz DDR3) and now I want to install photoshop elements 4 and 3 again, and when the installation is almost finished I get an error. Please help me to install photoshop elements 4 and 3 to my new Mac.
Well, you should have known that if you upgraded to mountain lion you would lose all your ppc software. Apple has been warning that this was coming since around 2006 and PSE 3 stopped being compatible with OS X back around 10.4, after all. 10.7 has been out for over two years now, so it's not like this has been a big secret.
Maybe you are looking for
-
Modalidade de determinação da BC do ICMS ST - Indústria Farmaceutica
Amigos, Estamos implementando o SAP GRC NFe 1.0 para um empresa do ramo Farmaceutico. Quando temos Substituição tributária, na TAG de ICMS, é necessário o preenchimento do campo MODBCST. No SAP para todos os casos de substituição tributária este camp
-
Iphone 4 with iOS5 wil not sync with Itunes 10.5 on Windows 7 64 bit.
Hi Guys, so I can synch my ipod nano fine with Itunes 10.5 but both my ipad 2 and Iphone 4 both will not sync, the synch or apply button is grayed out when I do any changes to the sync content like music or whatever..... Any one know what could be th
-
ITunes Blue Screen of Death when starting
Since iTunes 4.7, half the time when I enter iTunes, I get a stop error 0x00000050 or PAGEFAULT_IN_NONPAGEDAREA Sometimes when iTunes starts, it will run just fine, but most of the time it just crashes instantly. When I reboot, the computer says its
-
Out of nowhere today, the display on my G5 froze. My mouse works, but I'm unable to click on anything (and hovering over the dock doesn't do anything, either). I tried to restart but the same thing happens. I've also hooked it up to an external displ
-
In custom report, is it possible to get value of field only? No style info?
I need to build the following string in the results of a custom report: http://my.domain.org/myapp?A1=<#ORACLE.FIELD#> but when I run my report as a portlet, I get this instead, which leads to a "Page not Found" - http://my.domain.org/myapp?A1=<FONT