Labview 2010 and MSSCCI Source Control for TFS

Hi,
I am trying to get Labview to work with the MS TFS source control using the MSSCCI provider. In our team we are using the TFS to manage a number of Visual Studio projects and i need to integrate labview into the existing source control.
Having said that, I am having an issue selecting the MSSCCI provider in the labview source control window, when I select it i get the following error message:
"Error -2971 occurred at prefPage_Source Control.vi
Possible Reason(s):
LabVIEW: An error occurred while accessing the source control provider. The specified provider was not found."
Now i looked up that error code and it has somethint to do with some PerForce source control client, which I am not using.
Just for giggles, I installed the new PerForce client as per the following LV article http://digital.ni.com/public.nsf/allkb/9C42F3F1627CE0A78625768F007A7D03
but that did not help, now I have the PerForce client as an option in the SourceControl Provider name in LV (which i do not need) and labview still complains when I try to pick the TFS MSSCCI provider.
Any help could be greatly appriciated.
Aws

Out of curiosity, what registry values do you see in the "InstalledSCCProviders" key in the registry editor? The value data should point to the key that the "SCCServerName" value is at. In other words, the underlined portions below should match.
Registry Key Location: Computer\HKEY_LOCAL_MACHINE\SOFTWARE\SourceCodeControlProvider\InstalledSCCProviders
Value Name: Microsoft Team Foundation Server MSSCCI Provider
Value Data: SOFTWARE\Microsoft\Team Foundation Server MSSCCI Provider
Registry Key Location: Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Team Foundation Server MSSCCI Provider
Value Name: SCCServerName
Value Data: Team Foundation Server MSSCCI Provider
I was able to reproduce your error when I changed the value data so that the underlined portions above do not match; it may be that your issue is caused by a registry inconsistency.
Marcus B.
ELP Support Engineer
National Instruments

Similar Messages

I do not have the daq assistant vi on my labview 2010 and have found no drivers for it what should i do

I do not have the daq assistant vi on my labview 2010 and have found no drivers for it. I downloaded the service pack but that did not have it either what should i do.

Hi Youzhang He,
Did you install LabVIEW first on your PXIe 8102 before the drivers? Most likely, you're missing LabVIEW support for your DAQmx drivers. Fortunately, this is an easy fix. What you should do is open Add/Remove Programs, select National Instruments Software, select Uninstall/Repair. In the window that pops up listing NI software, select NI-DAQmx 9.x and select Modify. In the window that appears, expand Application Development Support and select to install LabVIEW support. From here complete the install process and restart your system. LabVIEW support should be installed and DAQ Assistant should appear in your palette.
Allie

Can i use subfolders with source control for developer ?

We'd like to use the repository as source control for our developer files.
We planned to use the following structure in the repository:
- Application Container
- Folder
- Files
We uploaded the files in the repository.
Now if we open the file through the ron the file will open in form builder, which is pretty good.
The following thing I'de like to do is a checkout of the file ... ok ...i'm going to file - administration - checkout - the message occurs: no versionable object exists ! ... ? :-(.
So I go to file - administration - source control options .. i'd like to say forms that it has to look for the file in a subfolder of the application system .. ok.
After changing this i try again - the same message.
If I return to source control options the container entry has been changed to the application folder.
Are Subfolders not supported by the source control for developer ?
Does anybody have the same effects ?
Background informations ?
Thanks in advance
Mario
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by [email protected]:
Did you check the file in first? When you first put files in Repository, they are initially unversioned until the first checkin...
Brian<HR></BLOCKQUOTE>
Hello Brian
Sorry, for the delay. I worked for some day for another customer.
Yes, i did.
I'm working like this:
- upload file with check in Folder which is under an application Folder (app - fmb )
- then i check out the fmb in the repository
- doubleclick in repository, which opens the form in form builder
- change the file
- File - Administration - check-in - connect to repository - choosing the workarea - and defining the folder (app - fmb ).
- The file will be check-in, but directly under the folder app.
Thanks in advance
Mario
null

Strange problem of calling library function node in labview 2010 and 2011

one year ago,I develop a program to usb device data and it works well,in labview 8.6 or 2009(win xp).Recently, When I test
the program in labview 2010 and labview 2011(win xp).,the program always crash immediately.I check the program and find main
problem is in call library function node. In my program,I use labview 2009 library for the USBExpress driver for
Silicon Labs USB MCU's from:https://decibel.ni.com/content/docs/DOC-9522,for example, 2 functions SI_OPEN and SI_READ
can not work well.
the header definition of SI_OPEN and SI_READ is:
SI_STATUS WINAPI SI_Open(
DWORD dwDevice,
HANDLE* cyHandle
SI_STATUS WINAPI SI_Read(
HANDLE cyHandle,
LPVOID lpBuffer,
DWORD dwBytesToRead,
LPDWORD lpdwBytesReturned,
OVERLAPPED* o = NULL
the SI_STATUS is equivalent to int type.
orignally, for HANDLE * in SI_Open, the parameter type in call library function node is numeric, data format is unsigned 32 bit integer ,and pass pointer to value.
for HANDLE in SI_Read, the parameter type in call library function node is numeric, data format is unsigned 32 bit integer ,and pass value.The program works well in labview 8.6&2009,however,crash in labview 2010 &2011.
later,I debug the program, for HANDLE *, I choose parameter type in call library function node as adapt to type, data format is point to Handles.for HANDLE, I choose parameter type in call library function node as adapt to type, data format is Handles by Value.Crash not happend in labview 2010&2011,however,it cannot read any data from from USB device correctly as before.I can not find the reason.
Dear friends,I need your help to answer the problem. Thank you.

Based on the help page it looks like it should execute asynchronously.
The thing in the description that leads me to believe they execute asynchronously is that you can configure the library to run as a multi-threaded operation.
Please take a look here to see the difference between synchronous and asynchronous execution.
Since the code even has the ability to be multi-threaded, you can consider it as running in parallel to your other code.
Any data returned is passed to the thread that called that function.
Cory K

Is LabView good at precise motion control for things like running an assembly line with lots of cars moving about?

Is LabView good at precise motion control for things like running an
assembly line with lots of cars moving about? Precise speed and
acceleration control? Safety interlocks?
Thanks for any help you can offer!
Sent via Deja.com http://www.deja.com/
Before you buy.

If you are a long time Nokia/Symbian fan then you will Know full well that Nokia phones ALWAYS improve with software updates, Symbian will not be abandoned and will not be replaced by WP7, it will continue to evolve and improve, as will the handsets. Anyone who desires or wants a different OS should try one, because it's a free world, but really, the 'perfect' OS doesn't exist, and Symbian suits me for now and I will rely on Nokia to keep it up to date, and reliable.
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi?

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi? There is probably a trivial, easy way to get this info, but I have not yet found it! Thanks..

Or if you want to grab all the paths programatically, try the attached VI.
Open the top level that you want all the paths from and close all others, then open the
attached and run it. It will return an array of all the VIs that the VI
in question uses, including vi.lib VIs. You can filter these as well if
you like.
Ed
Message Edited by Ed Dickens on 08-01-2005 07:01 PM
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Get all paths.vi ‏29 KB

How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
Vishal Goyal

Hi Vishal,
I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
look article on below link to enable developer dashboard on specific master pages
https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Let me know if this helps.
Thanks
Bhism

Does Measurment Studio Standerd edition contains graph and chart ActiveX controls for VB6

A Very Simple quistion:
Does Measurment Studio Standerd edition contains graph and chart ActiveX controls for VB6?

Shady -
Measurement Studio 7.0 Standard Edition provides support for Visual C++ 2003, Visual Basic .NET 2003, and Visual C# 2003. It just so happens that the Visual C++ support includes ActiveX controls, which are usable in VB6. The CWGraph ActiveX control provides both graphing and charting functionality.
However, full Visual Basic 6 support, including examples and documentation is not in the Standard edition. It is in the Professional and Enterprise Editions.
The best thing to do would be for us to get in direct contact with each other to make sure that we get you exactly the (minimum) package you need. If your profile includes your email address, we can contact you. Otherwise, you'll need to go through ni.com/support and refer to t
his discussion thread to open a direct dialogue.

I have a state space model of a complex system. can anyone help me for implementing MPC and e-MPC control for the same?????

Hi everyone. I am new to the forums, so let me be as mprecise as possible. i know the basic functionalities of Labview with MPC block etc. However, i dont know how to go ahead with implementing MPC control for a system whose state space model i possess. can anyone help me out?? the problem is that i dont even know the approach or the starting point..

This happens if you remove a program manually, but still have the registry keys to load files from this program.<br />
You can use the MSConfig program or the Autoruns utility to see which software and services are getting started.
*http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
You can use registry editor and do a search (Ctrl+D) for imesh to see if you can locate the registry key(s) that launches this program on a reboot.
Try to ask advice at a Windows oriented forum if you can't fix this.
* http://www.bleepingcomputer.com/forums/ - BleepingComputer.com - Computer Help Forums
* http://windowssecrets.com/forums/ Windows Secrets Lounge

Labview 2010 crashes XP while looking for webserver

Hi,
I am using a Windows 7 laptop with LV 2010 to compile my 32-bit executable. I've copied it to my target Windows XP, SP3 computer and after running it for a short while it rebooted the computer automatically (I believe the reboot was caused by a BSOD).
I've gone into the Windows Event Viewer and there is an event that says "Labview information: Error: 404 "Not Found" for "national instruments/ni-rpc/interface/eadfc80d-1e6f-425b-8986-12ccef98f646/ncalrpc", file "c:/program files/national instruments/shared/ni webserver/www/national instruments/ni-rpc/interface/eadfc80d-1e6f-425b-8986-12ccef98f646/ncalrpc": Can't access URL ."
I'm attaching a jpg of the Event in case I typed it incorrectly. There is another post that mentions this error but there is no resolution and the discussion went in a different direction: http://forums.ni.com/t5/LabVIEW/LabVIEW-2010-unstable-on-Windows-7/m-p/1247366/highlight/true
Neither my Win 7 development laptop or my target Win XP system have this www folder.
Has anyone seen this before or know the cause? Thanks.
Steve
Attachments:
Event Viewer small.jpg ‏69 KB

Altenbach,
Thanks for the quick reply.
Yes, the time stamp of this error coincides with the crash. I guess I assumed that it caused the crash because I see about 20-25 instances of it in the Event Viewer. Immediately before these errors appear there are two instances of the NI Configuration Manager with the Description saying "Opening configuration database".
This only happened on time and I have not been able to reproduce it again.
I'll need to explain to my customer why this Error has appeared so many times in the Event Viewer, and also how I can get it to not happen again. Do you have any suggestions? Once I isolate this error and prevent it from happening again then I can monitor the computer for future crashes.
Thanks.
Steve

Labview 2010 and internet toolkit 2012

We at our company are using labview 2010 for creating quick test applications.
I've recently created a program that uses features that are linked to the internet toolkit.
When creating an installer and installing the application on another system it didn't work, i later found out that you need internet toolkit installed in order to use these features.
In order to install the toolkit i have to install labview. Is it also possible to just have the runtime engine installed (2010 version) together with the interInternet toolkit 2012 in order to use these functions?

Like mentioned before the internet toolkit does not have to be installed on the target PC. If VI where missing from the executable, it will not run at all and return an error stating it is missing VI's. What I think happens is that the toolkit VI's are in an error state but since you do not stop the loop on an error the loop will just continue to run and because of the error it is not doing anything. You can do a couple of things:
1. Debug the executable. How that is done is described in the following KB:
http://digital.ni.com/public.nsf/allkb/8DA679805915DE40862572D5007B2F70?OpenDocument
When you are connected to the running executable you can use the normal debugging methods like probes to see what happens. Especially the error line would be good to monitor.
2. Let the loop stop on an error. The executable will then show the error (if any) in the error cluster.
3. Monitor the error line within the loop to see if there is an error occurring.
Let me know what the outcome of one of these actions is.
Regards,
Rik Prins, CLD
Applications Engineering Specialist Northern Europe, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Tftp on Labview 2010 and windows 7

I am having difficulty running tftp on my Labview 2010 on windows 7 using the system exec vi. I already enabled tftp client on windows 7. What is interesting is that tftp runs when I execute it directly from the command prompt but gives an error when I try using the system exec vi. The error says tftp is not recognized as an internal or external command, operable program or batch file . Please help. I have attached the vi I used
Attachments:
tftp_problem.vi ‏8 KB

If you use system exec, you either have to specify the entire path to the executable or if it is a system utility, launch the Windows Command Shell utility first with "cmd /c" and prepend the rest of your command after that. System Exec is NOT the Windows command shell but simply a way to spawn a new process. As such it has no notion of "Windows", "System32" and what else directories to search for unqualified command utilities. The only paths it probably will recognize for such unqualified commands is the "current directory path" and possibly the directories in the PATH environment variable. It won't look for directory paths that are specified for the Windows Shell in the registry.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Source control for SAP Netweaver development studio

Hi
Which source control product would be best to use with SAP Netweaver development studio?
And how do i integrate it into SAP Netweaver development studio? I've had a look through the various menus and settings in SAP Netweaver development studio and havent found any options for using a source control product to secure my java code.
Thnx

one way is to use NWDI for your code management.
/people/robert.schimansky/blog/2009/04/09/maintain-pi-71-adapter-modules-in-nwdi

I purchased a new Apple Keyboard and now the controls for the top row (the f1,f2, f3, etc...) will not function properly.

I cannot use expose, itunes controls, or anything. When I hit the controls for itunes, it activates either expose or the dashboard or something else. I can deactivate this in system settings under the keyboard controls, and I can even rebind the keys in there, however there seems to be no way for me to get my audio controls to work. How do I get skip, play/pause, mute, and volume controls to work again? I can't find anywhere I can go to bind the f-whatever keys to those functions again. This is very frustrating as I constantly use these audio controls.

I guess you have been to System Pres -> Keyboard? Use this to see if it changes:

Branch office Exchange 2010 Role base administration control for branch site administrator

Dear sir,
   Customer has a Exchange 2010 Main and Branch office environment:
- Main office Exchange 2010 CAS x2 +HTS & Mailbox x2 (Server1,2 & Server 3,4)
  (Main office administrator:domain1\administrator) - DAG1
- Branch office Exchange 2010 CAS+HTS x2 & Mailbox with DAG x2 (Server5,6 & Server7,8
   (Branch Administrator: domain1\badmin) - DAG2
   Customer would like to know what is the role which permission should grant / delegate for ID: badmin in order to manage Exchange server 5,6,7,8 ? (with manage user account and performance in DAG2 failover & branch exchange server)
Regards,
Joe Tam

Dear Brian,
   I have try in my lab to scale down into 2 x Server in 1 AD Single Domain And Single Forest. It still have many unexpected behaviour, can you please suggest whether it is a design or bug of Exchagne 2010 SP1?
Procedure:
============================================================================
Exchange 2010 Role Delegation Problem: (Single AD, Single Site)
Environment:
Server: Windows 2008 R2 AD x1 + (CAS+HTS+Mailbox) Server x1
AD Server: AD1
Exchange2010 Server : EX2010 (with SP1) – Member Server Joined to testdomain1.net
Domain Name: testdomain1.net (NETBIOS: TESTDOMAIN1)
In AD,
Login as domain administrator: Testdomain1\administrator
1. Create an Organization Unit OU1.
2. Create User User1 under OU1
3. Delegate User1 to allow create user in OU1
Select all item in “Delegate the following common tasks:
In Exchange 2010 Server,
Login as domain administrator: Testdomain1\administrator
1. Rename existing database name to HKDB1
2. Create a new database AUDB1 in EX2010 Server:
AUDB1 Create Done.
Assign testdomain1\User1 as Exchange 2010 local administrators group.
Logoff Testdomain1\administrator and Login Testdomain1\User1
Open Exchange EMC: (Failed, because no user management roles is grant).
Logoff Testdomain1\User1, Login Testdomain1\Administrator
Open Exchange 2010 PowerShell:
Delegate User1 to allow perform recipient management in HKDB1 only:
====================================================================
New-ManagementScope "HKDBSCOPE" -DatabaseRestrictionFilter {Name -Eq 'HKDB*' }
$RoleGroup = Get-RoleGroup "Recipient Management"
New-RoleGroup "HKDBRecipientManagement" -Roles $RoleGroup.Roles -CustomConfigWriteScope "HKDBSCOPE"
Add-RoleGroupMember “HKDBRecipientMANAGEMENT” -Member User1
====================================================================
Result:
In Exchange 2010 Server, logon as domain user: Testdomain1\User1
Open Exchange Management Console: (User1 able to open EMC now)
Perform Create User User2 in OU1 with Mailbox located in HKDB1
Mailbox Creation Failed because it cannot match the Database name = HKDB*
Logoff Testdomain1\User1, Login Testdomain1\Administrator
In Exchange Management Shell, enter:
Set-ManagementScope "HKDBSCOPE" -DatabaseRestrictionFilter {Name -Like 'HKDB*' }
Logoff Testdomain1\administrator, Login Testdomain1\User1
Open Exchange Mangement Shell and Create User2 again.
Create user successfully.
Perform create User User3 in OU1 with Mailbox located in AUDB1
User3 Creation Failed because it is not meet the Database restriction of User1 – Like HKDB*
Logoff Testdomain1\User1, Login Testdomain1\Administrator
Open Exchange Management Console, create User3 in AUDB1
Create User3 in Users Container, by administrator ID.
Logoff Testdomain1\administrator, Login Testdomain1\User1
Perform mailbox remove of User2
User2 mailbox remove successfully.
Perform deletion of User3
Mailbox User3 Remove Successfully.
Why User3 is allowed to deleted mailbox which is located in by using delegated of User1?
Moreover, it found that User3 properties can also be changed by using User1. Why?
Does it mean delegation cannot handle delete operation?
In Active Directory User and Computer: User2 is deleted successfully by using User1 ID.
In Active Directory User and Computer: User3 is also deleted successfully by using User1 ID.

Labview 2010 and MSSCCI Source Control for TFS

Similar Messages

Maybe you are looking for