LabVIEW 2010 App Builder: Registry editor has issue with keys of the same name at the same level in registry tree

This is a bug report for an NI application engineer. Please file a CAR.
In a LabVIEW 2010 project, create a new installer build and go to the Registry editor.
Enter some keys like the following
Click OK to close the installer wizard.
Now reopen the build specification and go to the Registry editor. The registry editor comes up blank and non functional.
I believe the registry entries are still written when the installer executes, but you cannot edit the registry any further in LabVIEW 2010. This was not an issue in LV 2009. The issue seems to stem from having two keys with the same name at the same level in the registry tree (in this case, the two "Test" keys).

Hi sensor_daniel,
This was reported to R&D (#305026) for further investigation.
Thanks for the feedback!
Have a great day,
Chris V
Applications Engineer
National Instruments

Similar Messages

LabVIEW 2010 App Builder/Installer- Target OS Options

I will shortly be migrating from LV8.6.1 Devloper Suite in Win XP 32 bit to 2010 running in Win7 64 bit.
Does the applicationbuilder and installer have the option to deploy Win XP 32 bit applications along with the corresponding run time engine?
Thanks
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~
Solved!
Go to Solution.

Hmmm, do you have a time machine?
LabVIEW 2011 is not released yet. You'll have to wait until August for that.
There is no specific Windows XP selection in the setup section of the Application Builder. It will simply create an installer for whatever Windows platform you are running at that moment. So if you run LabVIEW 32 Bit it will create a LabVIEW 32 Bit application and installer and if you run LabVIEW 64 Bit it will create an according application and installer. Needless to say that 64 Bit application and installer can only run on a 64 Bit system, while you can install the 32 bit application on either system.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

Go to Apple Menu > App Store > View my account > sign in and then edit the payment details with the new card details.
I am assuming that your card and supporting bank are in the same country as your residential (billing) address and that you are using the App Store of that country.

It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?

It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?

Hi clintfromid,
Thanks for using Apple Support Communities. I would recommend closing all your apps and restarting and maybe resetting as good initial troubleshooting steps for this:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari

What do I do if my mackeeper app says my computer has issues?

Ok so I was a little worried cause my cousin was visiting "innapropriate" websites on my computer and I wanted to make sure my mac was clean so I dowloaded mackeeper (I haven't bought the full version yet) anyway it said that my computer had approx.1037 issues and that I needed to clean up using instant activation and the program costs $88.00 so I was wondering? Should I be worried? Or is it just some sleazy programmer wanting to scare me into forking over nearly $90.00 so what should I do? Should I be worried?, and if so is there possibly a free application that would be better?

Get rid of MacKeeper. Uninstall it:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.
For any cleanup or maintenance see:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc. Other utilities are also available such as Onyx, Leopard Cache Cleaner, CockTail, and Xupport, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.

My wife has issues with her AOL email and was told to contact Apple about a virus scan. Has anyone else had a similar issue?

My wife has issues with her AOL email and a tech rep told her to contact Apple for a virus scan. Has anyone else had a problem like this?

You forgot to describe the 'issues' but there are no viruses that affect Apple OS X.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer some guidance on the main security threats and how to avoid them
Bear in mind that from April to December 2011 there were only 58 attempted security threats to the Mac - a mere fraction compared to Windows malware:
http://www.f-secure.com/weblog/archives/00002300.html
(I have ClamXav set to scan incoming emails, but nothing else.)

My magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.

hi,
my magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.
Anyone facing the same issue? Thanks.

Did you check System Preferences - Trackpad ? Also I'm not sure exactly what 3 fingered swipe are you referring to?

Lion / Safari 5.1 has issues with the pinch/zoom (embedded links don't zoom correctly)

Ever since upgrading to Lion Safari 5.1 has issues with the pinch/zoom. Any embedded link does not zoom in proportion to the surrounding page and it makes it unusable. (the embedded link zooms much more). Any ideas? This makes safari almost unusable for many webpages.
Is there a fix to this? Or can I consider uninstalling 5.1 and rolling Safari back to 5.05? Not sure if this is a Lion issue or a Safari issue. Everything worked great prior to Lion.
(I have to say, Lion has been more annoying than beneficial to this point!)

Here are 2 screenshots of the issue (before and after a zoom) see how the add in the first one that shows 25% off in the first picture zoomed too large after the zoom to see the whole thing?

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist. However, if I search the album name, all the songs show. How do I get the songs to show under songs?

For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist. However, if I search the album name, all the songs show. How do I get the songs to show under songs?

Hi Spam_Valley,
I understand that you are having issues with your music displaying correctly. This may be an issues with the metadata stored within that song, and iTunes interpretation of that info.
We may need to repair this. See the following resources for information:
iTunes 10 for Windows: If song titles don’t appear correctly
http://support.apple.com/kb/PH1468
Fixing Incorrect Song or Album Listings in iTunes
http://support.apple.com/kb/TA24677
Thanks,
Matt M.

How to sincronize with itunes an 3G iphone that has the same name as the new 4S

I've just boght a new 4s iphone to substitute my old 3G so when asked by itunes I didn't change the name of the new iphone. Now I have two I phones with the same name and the old one is not able to sinchronize with I tunes any more. It's not even able to restore it self so I could change its name to use it under a different Iphone, does any one have any idea of what can I do to reutlize it,. I'd much appreciate your advise, thank you,
León Nik

It's easy to rename each unit. When you connect your iPad and it syncs, the unit will appear on the left of the iTUnes screens just click on the unit there and you can rename it. You should do this immediately so you can see which unit was backed up by it's name. You can sync as many decices as you want in one iTunes library and you can even share Apps as long as you're going to sync both from teh same iTunes account. My household has 2 iPad 2s and we share our apps, and we also share downloaded books, magazines, music, etc.......

TS3510 I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?

I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?

I spoke with Apple Support this morning and they believe anything MobileMe related is due to the conversion over to iCloud that's taking place.
As for other email clients, check with your host to see if settings have changed on their end. I use inmotionhosting.com and over the weekend the updated their outgoing requirements so that a password authentication is now needed.
Hope that helps get some on the right path to resolving their issues!

Hi. My iPad has pb with his own light. Like all the lights for the screen don t work... You have like shadow on one edge. I bought two weeks ago! Thanks for answering

Hi. My iPad has pb with his own light. Like all the lights for the screen don t work... You have like shadow on one edge. I bought two weeks ago! Thanks for answering

Make an appointment with the Genius Bar at your Apple Store. If they determine there is an issue with your iPad, it will be replaced.

We had some accuracy issues with NI 5112 scope in one of the ATE and then I decided to perform self calibration using Labvidew vi to perform "niScope_CalSelfCalibrate(handle, "", 0);" function.

We had some accuracy issues with NI 5112 scope in one of the ATE and then I decided to perform self calibration using Labvidew vi to perform “niScope_CalSelfCalibrate(handle, "", 0);” function.
But it made it worse. I tried using option 2 to restore but it did not work.
Could you pls advice me to resolve this issue.

Hi Ana10,
Are you using this digitizer with NI VideoMaster? if not you should probably post this in the Digitizer forums. That said I would suggest using the self calibrate function in MAX for this device rather than the LabVIEW API method just so that you can rule out any errors in correctly configuring the digitizer for self cal in LabVIEW. Also you should ensure that all inputs are disconnected before performing a self cal. If this still results in an error in calibration you could refer to the following document or arrange to return the digitizer to NI for external calibration.
http://www.ni.com/pdf/manuals/370328e.pdf
Hope this helps,
Nick

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

LabVIEW 2010 App Builder: Registry editor has issue with keys of the same name at the same level in registry tree

Similar Messages

Maybe you are looking for