LabView 2010 Application Builder for EXE Always Included files are not Included
In LabVIEW 2010 F2, When I am using the Application Builder to build an EXE file, I have listed 10 or so files to Be "Always Included". But when I Explore the directory where the EXE was built, those "Always Included" files are not there or in any subdirectory under the EXE file.
This frequently makes my EXE file not work properly because important files are missing. I have to spend extra debugging time to find out the the cause of my problem is missing files that the Application Builder should have transferred "Always".
Why did the Application Builder, when building an EXE target, not include the files that should be "Always Included"?
Why does the Application Builder ignore these files specifications?
Dennis Knutson wrote:
The build does include files you select. Post an example project with a small VI and some separate files where this does not happen.
No, it does not appear that all of the files that I listed in the "Always Include" list are copied during the Build process to the Build directory or any subdirectory under that.
The Build Source Files.jpg file shows most of the list of the files that should be "Always Included". Notice the .VI and .ctl files that are listed
The Build Directory.jpg file shows the file in the Build directory that were built.
The Data Directory.jpg file shows the data directory under the Build directory and may include some of the files listed in the "Always Include", but not all of them.
The other subdirectories under the Build directory were created by me and do not include any files that were copied during the Build process.
So not ALL of the files that were included in the "Always Include" list were copied into the Build directory area as expected. ALL of the files that are listed as "Always Include" should be copied, if they exist. Those files existed when then were selected for the List and they existed at the time of the Build.
I can not include an example project that demonstrates this. I am prevented from doing so by the terms of an NDA. You are going to have to take my word that this event is real and happens the same way every time. This information should be sufficient for someone to investigate why do not ALL of the files listed in the "Always Include" list are copied into the Build directory area regardless of the file type or contents.
Attachments:
Build Source Files.jpg 151 KB
Build Directory.jpg 125 KB
Data Directory.jpg 131 KB
Similar Messages
-
for itunes 11: movie that are not purchased via itunes are now loaded into and catagorized as "home videos". I want all of my movies in one spot under Movies as they always were. How can i tweak/resolve this?
Cdaver wrote:
I have this issue too and want the same result, another feed suggests selecting the movie, going to get info, and changing this under options, but I suppose you have to do that movie by movie.
You can select all the movies you want and change them at once. -
When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.
I think there is not native rule for this, but you could try a transport rule which removes all attachments over a very small file size like 1KB.
http://blogs.technet.com/b/exchange/archive/2009/05/11/3407435.aspx
CRM Advisor -
Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ? My files are not corrupted after it is done like many other threads i have readed. Sometimes it's changing the title of a movie or editing the season and episode number of a TV show ect.....
Yup same here
I am running the latest iTunes, the latest updates to the OS and on an iMac 3.4GHz Quad core i7 with 8GB of RAM and the music stored on local HDD.
Still locks up iTunes for between 2 minutes up to 20 minutes.
Really annoying.
If you find a fix please, please let me know, I have just been throwing hardware at it with no joy at all -
Following Media Files Are Not Optimized For Final Cut Pro
I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
Thank you,
CraytonI did compress them to DV NTSC then burned it to DVD and the result was no bueno.
I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
- I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
- I rendered them in Premiere, then transfered the rendered AVI file to FCP.
- When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
- Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
- Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
Did that make sense?
Thank you again,
Crayton -
Everyting was perfect earlier. Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"
Everything is fine.
-They are the right format
-Quicktime is updated
-I have tried simply dragging them into the 'movie' library
-I have tried going to file<add file to library
Nothing works, has anyone else had this problem and found a way around it?
Any and all help appreciated.In addition to Mike's suggestions, you only have 4GB of RAM and Mavericks does use more RAM than other versions. You may also want to look at the apps that startup on login and the possiblity of upgrading RAM.
-
I'm running LR 4.4. Just picked up a Sony RX100 M3 cam. It's RAW files are not supported within my version. Is there a free update still available for my version or do I need to purchase an upgrade to LR 5?
Camera Raw plug-in | Supported cameras
The Sony RX100 III was first supported in Lightroom 5.5.
There will be no updates for older versions.
So your choices:
Upgrade to Lightroom 5, or
Download the free Adobe DNG converter, convert all Raw files from the RX100 III to DNG format then edit the DNGs in Lightroom 4.4
Photoshop Help | Digital Negative (DNG) -
I have lightroom 4 I've had it for years and it has imported my raw files from my CF card without issue . Now when I plug in my CF card to import new files it says import operations not performed and there are no image previews . When I continue by hitting "import" I get a pop up window that states "the files are not recognized by raw format support in Light Room"
Don't feel too bad. If the D4S has as many menus and custom functions as my Canon 5D Mark iii its easy to get messed up.
If you downloaded from the link I gave you it will be Lr 5.4. The link was just to show you when the D4S was supported. The newest version is 5.7.1 and can be downloaded here. Don't know your OS so you will have to pick Windows or Mac. Product updates
On my Mac I just run the downloaded installer program (its a full version and not an small update) and it installs the new version and erases the old version. If you are on Windows you will have to get help from a windows person. -
I worked for 5 hours in InDesign yesterday and today the files are not there?
I worked on a file in InDesign yesterday and today my current files are not there. I saved, I searched. Anyone know what else to try?
What version of ID? What OS? did you save from the menu, or by using the keyboard shortcuts?
There seems to be a bug, I think in CC 2014 on Mac, that is disabling the save and undo functions for some users. There are several threads about this. -
I purchased the Adobe pdf Pack to combine 50 PDF files to one and when I select them from my folder it claims "the files are not in a format supported for conversion to PDF". They already are pdfs, what am I doing wrong?
Moved to Adobe PDF Pack (read only)
-
I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
(I have replaced actual name with x's).
I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
I am at a loss to know how to take this forwards. I do not use IIS.
Any help would be appreciated.
Michael.Hi Michael,
For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
Xamarin or others?
Maybe you could disable or remove all add-ins in your VS IDE, test it again.
please also install the VS2013 update 4 in your side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
PR's are raised for components(PM2 Secondary Packing) are not in BOM
Dear Gurus
It was found that PR's are raised for components(PM2 Secondary Packing) are not in BOM
after MRP run. In MRP4 view of the material (Material type ZVER Primary Packaging material) i found that :
<u>SLoc MRP indicator# </u>
Reorder point 0 & Replenishment qty 0
Can u pls explain how to solve this problem??
Ragesh pkHi Ragesh,
Do u mean to say after the MRP run for header material, PR is created for Components which are defined in Header material BOM, if so
1.Please check Dep requirements created along with PR for components, this ill give pegged requirement (Source header Material).
or
use where used list to find out header material list inwhich , the component has included as BOM item.(CS15)
or
The component may be a followup material for another component.
Please try and come back
Regards
pradeep
Regards
pradeep -
After doing the recording for transaction fpcj, the values are not being se
after doing the recording for transaction fpcj, the values are not being sent to the g/l.
HI,
When you are recording.. you might be creating the values... ensure that they are updated into the GL before u write program. I doubt you might have missed the save ..
Thanks
Mahesh -
I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT
Check to make sure cellular data is not disabled in settings. If it's on, try re-setting the phone. If that doesn't fix it, call AT&T.
-
There are values for cost element 80000 that are not assigned to any line I
Hi,
While calulating WIP I am getting below error:
There are values for cost element 80000 that are not assigned to any line ID
Message no. KJ161
Diagnosis
Not all values for the cost element are assigned to a line ID.
Procedure
Assign the cost element to a line ID. If you don't want to include the cost element in results analysis, assign it to a line ID of category N.
You can access a detailed list of unassigned cost elements as follows: Start results analysis in the individual processing mode (transaction KKA1, KKA2, or KKA3). Select the field Full log. Execute the function. On the next screen, choose Logs -> Parameter List in the menu. A list is generated. The unassigned values are shown at the end of the list.
If cost element "+++++++++" was shown in the message, this is because in the assignment of costs and revenues to line IDs, you have not used a cost element other than the full masking "+++++++++". In this case a presummarization eliminates the information on the cost element.
Cost Element 80000 is of type 43 Internal activity allocation, I have Masked this in OKGB as below:
Controlling Area = FLGP
RA Version = 0
Masked Cost Element = 000008++++
Masked Cost Center = ++++++++++
Masked Activity Type = +++++
ReqToCap= COS (Secondary Cost)
I have Configure OKGA also but still system is giving error.
Please help me to understand.
Regards,
VivekI was wondering if you could help me I am trying to configure the RA key for Refurb orders and when I go into txn OKGB for the Assignment of C/E for WIP there is sample config already there which I copied. But I am having difficulty getting the KK1A to work I am getting the message as outlined above. Could you explain how this OKGB works and how to configure it a bit more fully. In my sample config there is a ReqTOCap section and in it there are letters like ABR, EK, FK, EL what do they mean. This is a screen shot of it. I am not sure how to go about this entirely so any light you could shed would be greatly appreciated. Can you suggest a good resource or documentation you may have, would be greatly appreciated.
Maybe you are looking for
-
IPod Cannot be updated or mounted with ipod updater or itunes
Every time i try to update my ipod on itunes i either get "The iPod "Tdunks iPod" cannot be updated. The disk cannot be read from or written to." or i will get "The iPod "Tdunks iPod" cannot be updated. Required file not found." When i try to use ipo
-
HAFileAdapter based OSB processing 1st file twice in 2 node cluster env
Hi, I am trying my hands in OSB with HA File Adapter and came across a strange issue where in OSB service designed to pick up a message of "*.CSV" format and process it's record one at a time recursively as per below details: The reason I am saying i
-
My iMac spontaneously re-booted while I was working on a photo. Now when I try to open the application, I get this warning: Can't proceed beyond quitting. No idea what to do to get to my photos. Have done a verify and repair of permissions, and a v
-
My mac is slow, freezing and has horizontal lines. How do I fix this?
Hi, my mac is freezing, slowing down and horizontal lines appear. How do I fix this?
-
Weird question in SSIS 2012 package
hi folks: I've created a SSIS 2012 package in my local machine using Microsoft SQL Server Integration Services Designer Version 11.0.3436.0 This package contains a script task using .NET framework 4 . Everything works fine and I decided to deploy