"LabVIEW 2010 Not Detected" shown when I install VBAI Development Toolkit

I have installed the following products:
(1) LabView 2011
(2) VDM 2011 SP1
When I wish to install VBAI 2011 SP1 with enabling "Development Toolkit", the error message prohibits me to continue the installation.
According to documentation "NI Vision Builder for Automated Inspection Development Toolkit Tutorial", I need this toolkit in order to create custom steps.
Some expert please guide me on this.
My products installed:

The error message is correct. The VBAI 2011 SP1 requires LabVIEW 2010 to be installed.
Vision Builder 2011 SP1 is a LabVIEW application that was build using LabVIEW 2010 and uses the LabVIEW 2010 runtime engine.
For people who would like to develop custom steps on Windows only, we could potentially come up with technical solutions, which would allow to use newer versions of LabVIEW (because LabVIEW installs side by side on Windows). However, Real-time targets like smart cameras and embedded vision system do not support side by side install of LabVIEW. For this reason, we decided to require the use of LabVIEW 2010 to develop custom steps.
Christophe

Similar Messages

Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not an upgrade); when I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Sno Lprd loads? thx!

Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not upgrade). When I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Snow Leopard Loads? thanks!

Hi Donald,
No it doesn't erase anything by default, it does what we used to call an Archive and Install feature, which can give you a new OS, yet preserve your files and settings if you have enough room on your HD...
http://docs.info.apple.com/article.html?artnum=107120
But it does it automatically unless you specifically erase the Disk, but will replace Tiger completely for the OS & several Apple Apps like Safari, Mail, etc, yet preserve your old settings for those!
If you think you may need Tiger to run any APPs that do not work in SL/10.6, then clone or backup first.
I would recomend 2 things before installing though...
Make sure you have enough RAM & HD space.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
"Try Disk Utility
1. Insert the new Mac OS X SL/10.6 Install Disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214

0PS_C02 update rules are not getting activated when i install 4rm BI conten

Hi All,
In BI Dev. sys for PS module- Project System - Dates 0PS_C02 cube- update rules are not getting activated when i install from the business content and its giving the error " IC=0PS_C02 IS=0PS_DAT_PRJ error when checking the update rules Message no. RSAU461" .
I deleted the inactive update rules(6 nos) and installed again from BI Content, then the same issue raising.
Can anyone help me out as i stuck up with this to move to go-live.
Thanks,
Sakali

Hi Vassu,
here are some of the reasons for getting error in update rules activation.
1. Check the formula or routines that are used in Update rules and check is there any syntax errors.
2. check whether the mappings are correct or not.
3. check the info objects which ur used for mapping are in active or not..
(or) if the info object may be deleted which ur using for mappings.
Thanks
Sai Chand.

How long does face detection take when first install Aperture3?

How long does face detection take when first install Aperture 3?
I just upgraded from Aperture 2 to Aperture 3 and installed latest updates to Aperture 3.2.2 and I have a message at the bottom of the browser: "Face detection..." with a spinning wheel. This has been going for over an hour. But it took six hours for Aperture 3 to upgrade my Aperture 2 library (approximately 60,000 photos). Am I looking at the same sort of time frame for "face detection"?

Thanks for the info... but I just answered my own question: I went to Aperture Preferences (thanks to someone's suggestion that this is where to turn off Faces) and an activity screen popped up showing Face detection progress. (Cool!) It's going thru all my images... and right now the status is 4,080 of 55,182. Very nice. So looks like I have a few more hours to go!

OUI does not detect RAC installation while installing 10.2.0.3

Hello all,
I have a 2 node rac on 10.2.0.2 on Solaris 10.
The other day when i tried to upgrade them to 10.2.0.3, the installer was not detecting
installation as a RAC(the cluster nodes were not shown), but as single installation. Even 'opatch lsinventory' didnt show the rac details which it was supposed to show in a RAC. So i have left my CRS with 10.2.0.3 and RDBMS as 10.2.0.2.. Seems like inventory got screwed, but not sure.
I am not sure how this installation was done.
A friend of mine said that there could be another means of installing RAC other than letting the OUI itself to copy the files to the node2 while installation and that is why it doesn't show the RAC details.
Is it possible to have Oracle Single instances on 2 machines to act as a rac by doing some changes?
Could someone let me know the different methods of setting up RAC (other than the default method of letting the OUI to do the part.) ?
Will there be some problem if i proceed installing 10.2.0.3 even if the OUI does not identify it as a rac installation?
TIA,
JJ

Hi,
myuolicdbd01 [SHCL1N01]$ ./opatch lsinventory -oh $ORA_CRS_HOME
Invoking OPatch 10.2.0.2.0
Oracle interim Patch Installer version 10.2.0.2.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home       : /u01/app/oracle/product/crs
Central Inventory : /u01/app/oracle/oraInventory
   from           : /u01/app/oracle/product/crs/oraInst.loc
OPatch version    : 10.2.0.2.0
OUI version       : 10.2.0.3.0
OUI location      : /u01/app/oracle/product/crs/oui
Log file location : /u01/app/oracle/product/crs/cfgtoollogs/opatch/opatch-2007_Dec_04_15-33-47-JST_Tue.log
Lsinventory Output file location : /u01/app/oracle/product/crs/cfgtoollogs/opatch/lsinv/lsinventory-2007_Dec_04_15-33-47-JST_Tue.txt
Installed Top-level Products (2):
Oracle Clusterware                                                   10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 2                            10.2.0.3.0
There are 2 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
Rac system comprising of multiple nodes
Local node = myuolicdbd01
Remote node = myuolicdbd02
OPatch succeeded.
myuolicdbd01 [SHCL1N01]$The below is for the RDBMS home and it does not show the node list.
myuolicdbd01 [SHCL1N01]$ ./opatch lsinventory -oh $ORACLE_HOME
Invoking OPatch 10.2.0.2.0
Oracle interim Patch Installer version 10.2.0.2.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home       : /u01/app/oracle/product/10.2.0/db_1
Central Inventory : /u01/app/oracle/oraInventory
   from           : /u01/app/oracle/product/10.2.0/db_1/oraInst.loc
OPatch version    : 10.2.0.2.0
OUI version       : 10.2.0.2.0
OUI location      : /u01/app/oracle/product/10.2.0/db_1/oui
Log file location : /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/opatch/opatch-2007_Dec_04_15-34-22-JST_Tue.log
Lsinventory Output file location : /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/opatch/lsinv/lsinventory-2007_Dec_04_15-34-22-JST_Tue.txt
Installed Top-level Products (2):
Oracle Database 10g                                                  10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 1                            10.2.0.2.0
There are 2 products installed in this Oracle Home.
Interim patches (2) :
Patch 5490848      : applied on Thu Nov 16 01:26:37 JST 2006
   Created on 5 Oct 2006, 10:16:33 hrs US/Eastern
   Bugs fixed:
     5407466, 5092134, 4925103, 5099995, 5079037, 5242650, 5079038, 4604970
     4763768, 4523125, 5225799, 5490937, 5490848, 4669305
Patch 5117016      : applied on Wed Jul 19 19:48:22 JST 2006
   Created on 30 Mar 2006, 12:52:17 hrs US/Pacific
   Bugs fixed:
     5117016
OPatch succeeded.
myuolicdbd01 [SHCL1N01]$Details of the Cluster Verification Utility
==============================
myjpsuolicdbd01 [SHCL1N01]$ cluvfy stage -post crsinst -n myuolicdbd01,myuolicdbd02
Performing post-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "myuolicdbd01".
Checking user equivalence...
User equivalence check passed for user "oraprd".
Checking Cluster manager integrity...
Checking CSS daemon...
Daemon status check passed for "CSS daemon".
Cluster manager integrity check passed.
Checking cluster integrity...
Cluster integrity check passed
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations.
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check passed.
Checking CRS integrity...
Checking daemon liveness...
Liveness check passed for "CRS daemon".
Checking daemon liveness...
Liveness check passed for "CSS daemon".
Checking daemon liveness...
Liveness check passed for "EVM daemon".
Checking CRS health...
CRS health check passed.
CRS integrity check passed.
Checking node application existence...
Checking existence of VIP node application (required)
Check passed.
Checking existence of ONS node application (optional)
Check passed.
Checking existence of GSD node application (optional)
Check passed.
Post-check for cluster services setup was successful.TIA,
J J

"IR Hardware Not Detected" message when trying to set up TV on Idea Center A700

When I am trying to set up my computer to get TV from my set top box the computer identifies my signal and shows a small picture of the live TV. When I click on next I get a message - IR Hardware not detected. Can someone please tell me to what this refers? My wireless remote works and the set top box has an IR cable that is only a few feet away. My TV remote picks it up easily. Is there more hardware that needs to be bought for the TV to work with this computer?
Thanks,
David

Ok, I have now gotten Reader 10 installed, can open files from my desktop but IE 9 keeps crashing when I try to open PDF files even though I exited and relaunched IE 9. I did take ownership of all the folders containing Reader 10 and then clicked OK when I got the error notice about the shortcut being installed. I did make a copy of the crash error report and it reads as follows:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 9.0.8112.16421
Application Timestamp: 4d76255d
Fault Module Name: IEFRAME.dll
Fault Module Version: 9.0.8112.16440
Fault Module Timestamp: 4eb319a7
Exception Code: c0000005
Exception Offset: 001b174b
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
Any help is greatly appreciated!

TS1538 Got an Iphone 5, and i have no sim card. i wanna use it as a tablet but im stuck in activation mode. i made an itunes account and my pc would not detect it when i plug into my pc. what do i have to do because im stuck in selecting english, united s

My iphone 5 has no sim card because i wanna use it as a tablet. i start it up and im stuck in setting the language, country , and then wifi. i select wifi which it connects perfect. then it trys to activate through wifi doesnt work and says contact apple.com/support. also says try to connect through itunes. i made a account and i plug in my iphone 5 to my windows 7 pc. computer doesnt detect it when i have it in itunes mode. my iphone 5 shows connect to itunes. what do i do?

You can not activate it without a SIM. If it is carrier locked, the SIM must be from the carrier it is locked to.
The SIM does not have to be tied to an active line of service, but it MUST be present.

Why does Local Folders not show up when I install Thunderbird on certain computers?

I've installed Thunderbird on my computer and it looks normal with "Local Folders" showing up in the left pane. I didn't add an email account, I just installed Thunderbird and an add-on called ImportExport tool and left it with only Local Folders. But when I try to do the same thing and install it on someone else's computer to help them import an .mbox file, when I install Thunderbird on their computer, "Local Folders" is not there. The left pane is just completely blank. And it looks like I can't import an .mbox file without it being there. I tried installing it on another laptop too and the same thing happened with no Local Folders. Why is "Local Folders" not showing up for these other two computers?

I circumvented the problem by copying the c:\users\username\appdata\local\thunderbird folder and the c:\users\username\appdata\roaming\thunderbird folder from my working PC to the nonworking computers, and Local Folders appeared in Thunderbird on those computers. It seems like these files aren't being generated properly on installation.
I tried uninstalling Thunderbird from my working PC and reinstalling it again to see what would happen (after also deleting those two appdata folders so that fresh ones would be created), and this time Local Folders did not appear on my PC as well. I don't think I did anything different during installation either. So I'm not sure why the Local Folders are no longer being generated at installation.

Event Structure's value change, not detecting changes when tabbing thru array of clusters

Hi! I have an array of clusters (int, int, string, int) control, and want to detecting changes made to the it. I used the Event Structure's value change case on the array, it works excellent except that it'll only detect the changes when you click out of the element or press the enter key (the one by the numbers, not carriage return). I want it to detect the changes when I tab thru the cluster or array too, but I can't figure it out... Does anyone have any ideas?
Thanks!

mfitzsimons wrote:
altenbach
Tried Value Change with my example done in 7.1 and it doesn't trgger an event. That is why I suggested Mouse Down.
Curious. I did a few minor edits in 8.0 before saving as 7.1, but the simple value change event got triggered just fine when the value vas terminated with a tab in 7.1. Every time. Strange....
Are you on 7.1 or 7.1.1? Maybe there's a difference (I am using 7.1.1).
LabVIEW Champion . Do more with less code and in less time .

Labview can not detect my smart camera ,1774c

Hello.
I have a 1774c camera and a computer with Labview2012 with Vision Acquisition Software and Real Time module installed as well.
MAX detects my camera and allows me to grab video or snap pictures.
But when I try to create a Labview vi and use a example to learn,but no camera is found.
Can anyone help me with this problem? If you need any more details just ask.
Thanks in advance!
Attachments:
sos.jpg ‏13 KB

I believe you have to create a target in your project for the smart camera. To LabVIEW, it is a separate computing device so it needs its own target. Inside that target, everything should work fine.
Bruce
Bruce Ammons
Ammons Engineering

Iphone not detected after snow leopard install

I just upgraded to snow leopard (and did a clean install so I deleted everything) but now iTunes isn't detecting my iPhone. When it's plugged in it charges but it doesn't show up in the iTunes sidebar. I already did the "authorize computer" thing and it didn't work
Please help!!

I basically have the same issue... i have an iPhone 3G and a Macbook:
- was running Leopard - ran software update
- installed Snow Leopard
- tried to plug in my iPhone to my Mac
- iTunes started up and got the neverending pinwheel
Noticed the following:
- iPhoto sees my iPhone fine.
- Remote app for my iPhone interfaces with iTunes fine.
Only have the "not responding" message with pinwheel after connecting my iPhone to my Mac with the USB cable. Not sure what's going on... hope the devs get a solution running soon!

Some frames are not being shown when printed but it is there in print previ

Hello Experts,
I am currently developing a form in smartform wherein I need to put frames in all cells. When
I print preview, all the frames are there. But when I print it, some of the frames are not shown.
What could be possibly the problem?
Thank you guys and take care!

Hi,
Refer to this link...[box not seen in smartform print |box not seen in smartform print]

Time machine not detecting external drive after installing OS X Server

Hi,
Recently I installed OS X Server to set up a vpn but while I have been setting it up I have noticed other Mac's with in the network can not back up anymore the the external hard drive that they used to.
I have made sure that the external drive is on shared folders etc. and the other Mac's can detect the hard drive if I use connect to server to connect to my Mac Mini that the hard drive is attached to.
I have tried to connect it to the Airport we have here but it wont come up on any computers under the Airports name, we are using its hard drive at the moment to back everything up to but we need to back up to the external hard drive ASAP.
The hard drive in question is a SmartStor DS4600 6TB using USB 3 to connect to the Mac Mini and all the Mac's are running Mavericks.
This needs to be resolved ASAP so any help would be greatly apreciated.
Thanks,
Bruce

I *think* with OS X Server to use an attached external drive as a TM backup, it has to be setup this way. You're right, a shared folder is setup under a Backups folder. However, each Mac on the LAN will create its back up in the Backups/Shared and those back ups will be visible if they ever need to restore.
I don't understand why you need to have the back ups created at the root of the volume. And I don't know if or how this can be done using OS X Server. I have always used the TM Backup service and have not tried to share an externally attached drive to be used as a back up. You may be able to do this by going into the File Sharing service and define your back up drive there. You'll have to give read/write permissions to each user just like you would do for any other shared folder.

My microsoft life cam is not compatible anymore when i installed os lion

Why is it that after I installed OS Lion, my microsoft life cam is not compatible anymore...please help me

Probably running on a PPC driver.
Is there any error message given when you try to use the camera? If so, what does it say?

Help me-adobe flash player install box "run" or "saveas" will not pop open when I install or update

I have windows vista 64. I already have flash player13 and reader x 10.1.9 but I can not get FLASH back.
It wasn't working on youtube. So I tried to update it. Went to adobe and clicked the yellow button to check to see if I had adobe flash. It said I didn't have it installed. I then went to control panel and checked programs and IT WAS installed. So I deleted it. Then went back to adobe page and tried to re-install the newest flash player.
Again. . . the dialogue box that normally pops up to choose;run or saveas Will not and Does not POP! I re-set my cpu 3 times during the process in order to get a clean go at it too.
Anyway thanks for your help and let me know please.
ps I figure this is something that may be fine in a week or two. But I still want to know wtf happened here and what did I do wrong.
Thanks
peace
josh

Flash Player for ActiveX (Internet Explorer)
Save that. Close your browser and run it. Then, it'll be installed.
Then, see: http://forums.adobe.com/thread/885448 and http://forums.adobe.com/thread/867968

"LabVIEW 2010 Not Detected" shown when I install VBAI Development Toolkit

Similar Messages

Maybe you are looking for