Labview 2010 Student Edition, will it work with the Labview FPGA module and Xilinx Spartan 3E??

Just as the title states.
I did a search here on compatibility, but I am coming up short with not much to show for it.
I have Labview 2010 student edition, 32bit and 64 bit. I am trying to do a Senior Design project for my undergrad, and I am having some issues.
I was able to download the Support for the Xilinx Spartan 3E and Labview FPGA.
I install it, it runs through the unzipping process, installs, and then mysteriously I cannot find it. I have looked through my programs list and it is not listed. I open both editions of LabView and I find ABSOLUTELY NOTHING indicating that either one has ANYTHING to do with FPGA.
Did I install it wrong? Or is it just not supported in the studend version of Labview???
Can someone help me, please?

M Boat wrote:
What about the trial version? Any chance of it being on there?
I think everything is available for download, and without activation it will be in trial mode and you have about a month (?) before the trial expires.
A trial version of the FPGA module is available for download here. I have no idea if it would work with the student version.
I would recommend to talk to your local NI sales representative for advice. Good luck.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Which cable (original apple usb or bmw y) shall i use to connect my 4th gen iPod photo 60 gb to bmw f10 (with com box) is it going to work with the apple usb cable and how long does it take till I can access the 33gb content via the bmw display?

    Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
    Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

    Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
    Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

  • My work computer runs Outlook 2003, which I know will not work with the iCloud, so I hard sync.  But then the new info on my iPhone does not backup to iCloud.  Is there a solution?

    I have a Macbook and iPhone and like to back up to iCloud.  However, my work computer runs Outlook 2003, which I know will not work with the iCloud.  The company has no plans to update anytime soon.  Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes.  The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud.  Is there a solution?

    I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!

  • HT4623 I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

    I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

    Also i forgot to add after a night of searching how to turn the Epson Workforce 435 printer into Airprint friendly and not iPrint (which are 2 completely different things) i donwloaded a program called (AirPrint Activator) from HandyPrint. The link is below to download the software. Once i installed the application i set my printer to be shared over my Home Network (Wi-Fi Network). Once you have done that, open the AirPrint Activator application you have just downloaded, swtich it ON from OFF mode, and then you should easily see your printer name in my case EPSON Workforce 435 and then just close the application. Then go to your IOS Device like your iphone/ipad/ipod touch select a picture that you want to test print or even an attached PDF from your email, and select Print in the share button. You will then be prompted to select your printer. Your printer you automatically be recongised then just select print. And now you have a complete AirPrint ready printer with a Printer that doesnt even support the function. Im sure you can do this to all Wireless Printers, even if they came out before Apple AirPrint service launch.
    And also if you still need guidance and a video to follow from just click the Youtube link below
    http://www.youtube.com/watch?v=9r75m_VUr0E
    Download AirPrint Activator Link
    http://netputing.com/handyprint/
    I hope that this helps your question and enjoy your day
    Kind Regards
    Ahmed

  • Will InDesign4 work with the newest MAC operating system -- OS10.9 I think.

    Will InDesign4 work with the newest MAC operating system -- OS10.9 I think.  My OS crashed and they have to wipe the computer to put on a new system. I don't want the latest system if it won't run CS4. I bought Creative Suite Cloud version and had nothing but problems with it and the system I was running. In fact all the problems with my computer started just after I put CS Cloud version on it.

    Thanks for answering. I'll try to be more specific in my question.
    Steve Werner <[email protected]> wrote:
    Steve Werner  created the discussion
    "Will InDesign4 work with the newest MAC operating system -- OS10.9 I think."
    To view the discussion, visit: https://forums.adobe.com/message/6587879#6587879
    >

  • If i buy a Unlocked iphone 4s and use it in another country will it work with the countrys data Services that are local

    If i buy a Unlocked iphone 4s and use it in another country, will it work with the countrys Local data Services

    hi guys,
    i recently bought a new iphone 4s factory unlocked. in order to avoid sim failures and invalid sim errors or No service errors, Each phone has to be unlocked by connecting it to the Itunes.
    Kindly follow the below steps to avoid any SIM card conflicts
    iPhone FULL Unlock - How it Works:
    -Connect your iphone to itunes without any network sim inside and when connected click on the iphones name.
    - Click Restore install latest version of iTunes on your Pc or Mac or click check for updates
    - Let itunes Backup your phone and then Flash to the Latest Version.
    - Now disconnect phone and reconnect after 10 seconds.
    - Now Enter another network simcard that's not the same network its locked on to
    - Connect phone to iTunes with not accepted (not valid) simcard
    - Wait until iTunes detects the phone
    - iTunes will display (Congratulations, Your iPhone is now unlocked)
    - Phone Unlocked
    - just follow the instructions about activating the Iphone.
    and iphone is unlocked
    NOTE : This is the only FULL LIFE TIME UNLOCK solution for Apple iPhone as the IMEI is registered as UNLOCKED in Apple database.
    This solution should be used ONLY THOSE WHO BOUGHT FACTORY UNLOCKED iPHONE 4S.
    Your phone will always be unlocked even after each new update of your phone firmware !
    All reasons given like bad IMEI series, manufacturing defects etc blah blah are not logical as everything was tested before every sale.

  • I bought lightroom student edition will my access to the product run out?

    i bought lightroom student edition will my access to the product run out?

    Do you mean when you graduate?
    No.

  • Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and  both carriers verizon and Yemen mobile work by the CDMA system don't know whey

    Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and  both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

    A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
    Regards.

  • Will it work with the 2010 MacBook Pro?

    Can anyone tell me if the Apple DVI to ADC Adaptor will work with the 2010 MacBook Pro with DisplayPort using Apple's "Mini DisplayPort to DVI Adapter"?
    Cheers,
    Mitch

    I'd suggest checking out the drives at OWC:
    http://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD
    They speak Mac and have excellent customer service.

  • Will this work with the titanium ? (pic)

    Hey guys planning to buy a new pioneer 89. I want to connect it to my titanium card. so i plan to connect it using analog RCA to mini jack.
    What I want to know is will the BD/DVD multi in work with the titaniums analog ports?

    im not experince with digital receivers.
    Old games such as counter strike don't use digital 5.1 hence why im using analog inputs. i think analog will work well unless you or anyone can tell me another way i can emulate 5.1.

  • Will Bootcamp work with the 3T fusion drive with the Mountain Lion update?

    The notes on the update say it will work with the 3T drive but in typical minimalist fashion, Apple doesn't mention whether that includes the 3T fusion drive.  Why can't they just explain things fully?
    anyway, does anyone have an answer?

    I installed 10.8.2 update today with my 2012 MBA.  The details of the update include:  Resolves a video issue with some VGA projectors when connected to certain Mac notebooks.
    I tried using the MBA with a video projector and it found the correct resolution and connected with the projector automatically.  Using detect displays in the disoplay preference pane wasn't even necessary. 
    I hope this is the fix I have been waiting for with the 2012 MBA.
    Thank you Apple.
    RC
              (http://support.apple.com/kb/HT5460)

  • Will iCloud work with the original iPad?

    Will iCloud work on the original 1st generation iPad?

    Partially. Click here for more information; it's limited to the features compatible with iOS 5.1.1.
    (107884)

  • If I buy an iPhone 5s in America will it work in Ireland , and will it work with the irish 4g

    Hi I am going to America next week and want to buy an iPhone and I am wondering if an iPhone 5s bought in America will work with the irish 4g network when I come home? Please help

    In general LTE will only work in the world region the device was designed for. And for it to work correctly all of the bands for your region must be supported by the device.
    So assume that a North American iPhone will not work on LTE in Ireland, and decide if it is worth the difference in cost. Remembering that the prices you see advertised in the US are subsidized prices, and an unlocked phone costs much more than that. For example, a 5S 16 GB is $649, a 32 GB is $749, and a 64 GB is $849. To this you must add sales tax, typically 8% to 10% depending on where you buy in (NYC is 8.75%).
    Then once you get it back to Ireland you must pay import duty and VAT, unless you smuggle it in. If you get caught smuggling it there will be a penalty on top of the duty and VAT, and they may even seize the phone. I have no idea what the chance of getting caught is, but if I were a customs inspector I would watch for things like that.
    And finally, once you have it safely in Ireland if it ever needs service you will have to bring it back to the US.

  • Before I downloaded the latest version of Firefox I could us the Norton Idnetity Safe. It will not work with the new version. What do I have to do to make it work?

    I am not sure if this is a plugin or extension. All I know is that it worked with the old version of Firefox. It is very important to me to be able to use this feature. Any help would be appreciated.

    THIS ISSUE IS RESOLVED FOR ME.
    When I opened this pop-up to view the settings (File > Page Setup > "Format & Options": Scale ), the Scale value was 40%. Changing it to 100% corrected the issue I observed.
    To my knowledge, I have not been inside this pop-up window before to set the Scale option. Could this value be affected by other actions within Firefox? I noticed this while using v12 which was installed 24Apr2012.I know it worked correctly since that installation, so why did the Scale value change?
    UPDATE: I just realized that the Scale option in print preview sets the Scale value in the settings. NOTE TO ALL: This is a sticky setting, not just a setting for a specific output request.

  • Will the ELVIS board work with LabVIEW 2010 Student Edition?

    I recently acquired a traditional ELVIS board (with the PCI DAQ board). So far I've only installed the evaluation for LabVIEW 2010 (x64), and when I attempt to install the ELVIS Traditional 3.0.5 software I get the following message: "This installer requires LabVIEW 8.5 Full Development system or later to be present on this computer. LabVIEW Base Development System in any version of LabVIEW is not supported. Please install LabVIEW and then run the NI ELVIS installer again."
    I am eligible to purchase a student license for LabVIEW 2010 and would like to know if the ELVIS Traditional 3.0.5 software will install after I've acquired a student license.
    I am running windows 7 (x64) with an evaluation version of LabVIEW 2010 (x64). 
    Solved!
    Go to Solution.

    Perhaps I spoke too soon. I purchased a student license for LabVIEW 2010 and am still receiving the same error. I've provided screenshots of my license and the message from the ELVIS Traditional 3.0.5 installer.

Maybe you are looking for