Labview 2012 Runtime Application Crash: Access Violation Error

hi All,
my rather large app that I been develping over teh last few years has recently been crashing.
I do not know if it is since I began compiling it in LV2012 SP1 that the problem occurred or I have some programming error
that I cannot track down.
It use to run with uptimes over months, even with some memory leaks.
If I monitor using Task Manager there is no decernable increase in memory usage.
It crashes on two different systems - both running Windows XP.
The developer version running in LabVIEW 2012 f5 ( Windows XP ) does not crash. Only the runtime version crashes.
It also crashes either if the program sits idle for a few days - 5 or so ( memeory footprint stable ), or if it is used extensively to actively gather and control several instruements ( memory increase matches data size increase )
It does call several external API via ActiveX to spawn off processes, however from the lvlog.txt it seems the crashing is a simple open file that uses the NI supplied String to Config.vi.
I have double/triple check my code and I close any refernces open by the calling vi.
I am sure how to read teh mini-dump files so if someone can look at these it would be apreciated
thanks
Michael
Here are two crash logs:
Attachments:
fde86f7f-a024-417d-ac1c-d38b2e9a41e3.zip ‏61 KB
4f75c413-793d-46db-b66c-889a2f2daf69.zip ‏59 KB
00660fb7-749d-4af5-bcb1-ac5cad73a5cb.zip ‏56 KB

Hi Michael,
It's tough to tell what's going on, especially since it seems like you've really covered your bases! I'm curious about the fact that you don't see the crashes in LabVIEW (LV), just in the Run-Time Engine (RTE). Have you ever tried running it in LV for an extended period of time?
Also, do you have any loops in your program? Perhaps shrinking any waits that might be present and allowing your program to run faster would decrease the amount of time to see these errors from days to shorter.
In the future, when you get a dump file, submit it to our R&D department. It then pops up on a website that allows me to read them. I can also use win debug but that will take me a bit, so I'll have to get back to you on that.
Also, if you could take a picture of the error, that would help as well.
Julian R.
Applications Engineer
National Instruments

Similar Messages

How to resolve and debug access violation Error.

Hello
I'm stucked with an access violation error which forces my exe build to shut down. I tried also from development environment but its the same there. The error happens after 5-60minutes.
I played around with disabling a part of the program where it was possible and I think I'm now able to accuse the vi "gastimer.vi". But since this vi leads through the measurement procedure, there are some commands outgoing which I was not able to map one to one.
My question is: what can cause such access violation errors? I have no dll calls, no third party library, actually the hardware communication is done serial by COM ports. The architecture principle is something adapted from producer consumer loop, except that i have often more than one consumer, so I called them like controller loop - multiple task. The communication within this loops (tasks) are done by queue cluster with an enumerator and variant.
The indicted vi "gastimer.vi" was transfered from an older and more simply architecture. This vi works with sequence structure and a lot of local variables.
Since I'm testing sensor on their response to gas concentration I have 10 comports to which I'm listening in parallel.
What styles or archtiecture are prone to access violations? Where can they happened? where should I look more carefully in the code?
How can I use the desktop execution trace toolkit to get more information about the cause of the access violation?
Attached are two different lvlog but I guess with the same error source. In the second lvlog are two vi's named. What have they to do with the access violation error? What kind of information can i get from these lvlog files?
Last attachement shows a runtime fatal error which happens quite a bit frequently in the recent time when working with this project. Might there be a connection, propably a crashed vi, typedef or whatever?
Thanks for any help
U. Siegenthaler
Solved!
Go to Solution.
Attachments:
first.zip ‏203 KB
second.zip ‏40 KB
Fatalerror.PNG ‏21 KB

Have you checked your code to try to isolate any areas of possible memory leaks? I was able to find some discussion forums with similar problems. Check out the links below to see if any of these resources can be of assistance to you.
"Exception: Access violation (0xC0000005) at EIP=0xFDD76383"
http://forums.ni.com/t5/LabVIEW/Exception-Access-violation-0xC0000005-at-EIP-0xFDD76383/m-p/2257502
"Exception: access violation (0xc0000005) at EIP=0x00BD0984 "
http://forums.ni.com/t5/LabVIEW/Exception-access-violation-0xc0000005-at-EIP-0x00BD0984/m-p/2303864
"Access violation (0xC0000005)"
http://forums.ni.com/t5/LabVIEW/Access-violation-0xC0000005/m-p/2269694
Let me know what you find and if you have any other questions.
Best regards
Matijas

"Access Violation" error messages in Diadem 9.1

We have recently purchased Diadem V.9.1 and are encountering numerous "Access violation" errors as well as Runtime errors.The most frustrating aspect of trying to run this software are the constant crashes we are experiencing.
It is taking us 3X as long to process one subject as it should. I posted a request to NI technical help but I think it is the Thanksgiving holiday in the US.

Actually, DIAdem 9.1 is a very stable version. If you are continuously
experiencing crashes this might be due to some problems with your
computer hardware or configuration.
Is your PC matching the recommended system requirements as found in the
helpfile? What OS are you using, did you install the most recent
servicepacks?
Do you have similar problems with other software on this computer as
well? Unexpected system crashes often occure because of corrupt
RAM chips. DIAdem is using a lot of memory - so maybe you are accessing
regions that other programs dont use and - for that reason - see
the crashes only in DIAdem.
You are writing that the processing takes 3 times longer than expected.
How do you compare? Have you been using elder versions of DIAdem which
were faster, or are you comparing with the processing speed of another
computer?
There are some things I would do to try to improve the performance.
Check that you have at least 256MB RAM
Check that you are using Windows 2000 with servicepack 4 or XP with servicepack 1 at least
Reinstall DIAdem, use the version 9.1 SP2 instead of the installer you have been using. You can download this installer here.
Add servicepack 2b afterwards. The latter is a selfextracting zipfile
which has to be unpacked in the DIAdem directory while the first is a
complete DIAdem installer.
Replace the RAM modules of your PC.
You are welcome to post again if you dont get any further. In this case
please give some more information about the system such as CPU, OS,..
and the crashes. When do they occure? Is it a specific function or
module you are using when DIAdem crashes. What does the error messages
tell you about the module in which the exeptions occure?
Regards
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany

Java.exe Access Violation Error(URGENT)

Hi all,
I have created a application for my company. This application requires a user to login into the site by giving his userid/pwd. Once the person logs into the site, there is this error "Java.exe Access Violation Error" which pops up and terminates the Web Server.
My Login page is a HTML page which inturns calls a Jsp which authenticates the user.Once the authentication is completed, the user id is put into the session so i can check for the existence of user session on each subsequent page. After the user successfully logs in, the error pops up.
Please get back to me incase u have ever encountered this error and what might be the solution.
I am using Tomcat Webserver 3.2.3, Sql Server 7.0 as the Database Server, JDK1.3 .
Regards,
Yatin

As far as i remember i faced this problem when the memory of my pc was broken. So it may not be a problem of java or html code.

Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

Hi All,
I'm using diadem from .net Program. While on the run I'm getting the following error.
Error While executing "" Command
Error type ACCESS VIOLATION
Error Address: 0006898E
Module name:gfsdesk.DLL
Anyone have any idea why this is happening?
regards,
Swaroop

Hi Swaroop,
It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
Andreas

Access Violation error with Diadem 2011

I've started using Diadem 2011, and have run into an Access Violation error when loading some of my existing reports. I've created a simple example which shows what's happening:
I've created a simple Bar plot:
If I change the left hand bar to be "Filled" instead of "Right Diagonal", Diadem throws up an access violation error. I've attached the TDM and TDR files used to create the graph. The error in the log file is:
139 Error while executing "" command
     Error type: ACCESS VIOLATION
     Error address: 0004F5E5
     Module nameIAdem.exe
Diadem: 11.0.3f4563 TDM
USI: 1.9.0f4551
DataFinder: 3.0.0f4556
(By the way, it would be great to be able to copy those version details directly from the About page!)
Attachments:
Data.zip ‏7 KB

I've tried this as administrator, and have exactly the same issues, so it doesn't appear to be a permissions problem. I've uninstalled and reinstalled DIAdem and everything's the same.
Here's another ZIP file with hopefully all of the required files. I've created the data files from scrathc several times, and see the same problem. One other thing I've just noticed is that it only occurs when filling the bars with the color Black, not blue or red or anything else.
Attachments:
Data.zip ‏9 KB

JDeveloper 3.2 Problems - Access violation errors

Hi,
I suddenly got the following error message on a dialog box when I was editing code in the visual designer:
QUOTE
Access violation at address 00402FC8 'jdeveloper.exe'. Read of address FFFFFFF
UNQUOTE
When I tried to save my work, I was not able to received a similar message. When I tried to exit, I recived the following message:
QUOTE
JDeveloper was unable to autosave the current workspace. Do you wish to close the workspace anyway?"
UNQUOTE
After exiting the workspace, I was not able to reopen the workspace. I created a new workspace and added my projects to the new workspace. I was happy that I did not lose my work.
I have received the access violation error before. I do not know what causes it and I would appreciate very much if the JDev team explains why such an error occurs.
Thanks.

Hi,
We intermittently see postings of this kind. The more information you can provide us about your environment and what you are doing when you get the error, the better:
1. What OS are you running (include version and SP).
2. What kind of processor does your machine run?
3. Do you have a single processor or multiple?
4. What kind of project were you working on? Did you create an empty project and a new class file and were just editing source code, or did you create some initial content using one of the wizards from the Object Gallery and were modifying the generated code, or did you import existing code from some other location?
5. How many source files did you have in the project?
6. Was the source file you were editing a .java file, or a .jsp, .xml, .html?
7. Does this happen frequently, or is this the first time? Has it happened since?
Again, the more detail you can provide, the better we are able to identify possible sources of trouble.

ACCESS VIOLATION error in Report

Hi,
I am getting an access violation when trying to save a report. The report only has two worksheets. ONe is a table of contents and one of them is a template for plotting data.
Error while executing "PicSaveAs(FileDlgName)" command
Error Type: ACCESS VIOLATION
Error Address: 89FFEE10
Module Name: DIAdem.exe
I am using Diadem 2011.
Basically, I am trying to create a template file to make plots with. I have a script that copies my template plot, plots the next channel, and repeats for all channels in the data portal. The script works fine, and I got it to run once. HOwever, I wanted to make a change, and something happened to my original template file. So I open my report with 100 pages, delete all pages (and by the way WHY CAN I NOT DELETE MORE THAN ONE PAGE AT ONCE? this is very annoying that i have to do this one at a time (and confirm every time) either by manage or delete options) except one, and I try to save this as my template plot and I get this error...tried several times...Any ideas?
jason

Hello Jason,
a workaround for you could be to open two instances of DIAdem. Open your report in DIAdem one.
Open first page and select "Edit->Select All" and "Edit->Copy" go to your second DIAdem and open Report with an empty report. Select "Edit->Paste" and your template is restored.
Greetings
Andres
P.S.: Please post your report anyway if possible to help us to find the issue.

Crash: "Access violation (0xC0000005)"

Hello,
One of our programs has crashed (crash of LabVIEW Runtime).
The reason was an "Access violation (0xC0000005)" in the LabVIEW Runtime.
Because it was an Error of the LabVIEW Runtime, I can not log the Error. This Error occurs only very seldom > than every 3 weeks.
Attached is the error report and a Screenshot of the Error Window.
So I have no Idea how to locate the error.
1. What can cause this Kind Error?
2. How can I locate the error cause?
3. Can National Instrument isolate the error?
Thanks
Sletrab
Attachments:
Error Window.jpg ‏20 KB
1ba236e7-4073-4e5e-9fe2-517a4eb8d8da.zip ‏40 KB

These types of crashes are very conserning, and difficult to isolate (as you already have discovered). Here's what I've done in the past.
Memory monitoring. Built into Windows 7 and newer is the Performance Monitor. Not sure where it is I always click Start then type Performance Monitor. It lets you log data over time and I usually set it up to log my application (or LabVIEW.exe) and look at different memory. There are all kinds of memory from private, to public, and several variations in between. This it self doesn't fix anything but may help in predicting when it happens. If memory increases at some rate and it always dies around the same value it might help.
If you can predict, and reproduce the issue, try changing the code to see if the issue goes away, or happens faster. For me I made my logging routine run twice as fast. So for all data I log I log it twice. If the issue happens sooner it is likly something in the logging routine.
After that I did a binary approach where I would disable parts of the logging code until the issue when away. Turns out it was a bug in the TDMS logging routine that I could isolate and post to the forums. NI agreed and fixed it in an update, and also had a work around until the update went live.
Another thing I've tried is to upgrade to the latest everything and see if it behaves differently. I would make an image of the harddrive as a backup, then upgrade to the latest LabVIEW and drivers for everything. Then try again. In a few cases things were fixed by upgrading, and the cost of upgrade was less than the weeks it would take for me to track down issues that may or may not be my fault.
EDIT: Oh and giving the crash report to NI is a good place to start. Not sure what they can understand from it.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Access violation error with 1.4.0

Our client/server application (RMI) ran fine in 1.3.1. When we compiled and deployed with 1.4.0, an error of "access violation" were thrown by Windows NT or Windown 2000 at run time. Stack trace posted as below. Anyone has any ideas on the cause of it. Thanks you very much.
Application exception occurred:
App: (pid=346)
When: 6/18/2002 @ 17:18:40.166
Exception number: c0000005 (access violation)
----> System Information <----
Computer Name: PAUL
User Name: paul
Number of Processors: 1
Processor Type: x86 Family 6 Model 4 Stepping 2
Windows Version: 4.0
Current Build: 1381
Service Pack: 6
Current Type: Uniprocessor Free
Registered Organization: Quarry Technologies
Registered Owner: Quarry Technologies
----> Task List <----
0 Idle.exe
2 System.exe
20 SMSS.exe
24 CSRSS.exe
34 winlogon.exe
40 SERVICES.exe
43 LSASS.exe
68 SPOOLSS.exe
81 defwatch.exe
86 inetd32.exe
93 MGABG.exe
94 mgasc.exe
97 mgactrl.exe
99 rtvscan.exe
45 rtsserv.exe
112 RPCSS.exe
117 portserv.exe
127 wtxregds.exe
130 WinVNC.exe
137 PSTORES.exe
140 mstask.exe
144 NOPDB.exe
200 NDDEAGNT.exe
122 explorer.exe
186 systray.exe
187 mgaqdesk.exe
44 vptray.exe
113 point32.exe
91 realplay.exe
209 winampa.exe
211 loadqm.exe
213 aim.exe
215 msmsgs.exe
218 wftpd32.exe
192 OSA.exe
238 esserver.exe
240 vpexrt.exe
241 CMD.exe
63 vncviewer.exe
255 JBuilder.exe
277 DDHELP.exe
274 CMD.exe
287 CMD.exe
293 SYSLOGD.exe
313 SYSLOGD.exe
270 P4Win.exe
310 javaw.exe
346 javaw.exe
443 javaw.exe
433 javaw.exe
354 DRWTSN32.exe
0 _Total.exe
(00400000 - 00406000)
(77f60000 - 77fbe000) dll\ntdll.dbg
(77dc0000 - 77dff000) dll\advapi32.dbg
(77f00000 - 77f5e000) dll\kernel32.dbg
(77e70000 - 77ec5000) dll\user32.dbg
(77ed0000 - 77efc000) dll\gdi32.dbg
(77e10000 - 77e67000) dll\rpcrt4.dbg
(78000000 - 78046000)
(6d330000 - 6d330000)
(77fd0000 - 77ffa000) dll\winmm.dbg
(6bd00000 - 6bd14000) K:\DDK\lib\i386\free\cm-pci.dll
(6d1d0000 - 6d1d7000)
(6d300000 - 6d30d000)
(6d210000 - 6d228000)
(6d320000 - 6d32d000)
(6d2d0000 - 6d2dd000)
(776d0000 - 776d8000) dll\wsock32.dbg
(776b0000 - 776c4000) dll\ws2_32.dbg
(776a0000 - 776a7000) dll\ws2help.dbg
(74ff0000 - 74ffe000) dll\rnr20.dbg
(77bf0000 - 77bf7000) dll\rpcltc1.dbg
(77660000 - 7766f000) dll\msafd.dbg
(77690000 - 77699000) dll\wshtcpip.dbg
(6d2f0000 - 6d2f5000)
(6d000000 - 6d0f6000)
(77c00000 - 77c18000) drv\winspool.dbg
(76ab0000 - 76ab5000) dll\imm32.dbg
(77b20000 - 77bd7000) dll\ole32.dbg
(6d180000 - 6d1d0000)
State Dump for Thread Id 0x18b
eax=6d3fb8cc ebx=00000000 ecx=00762700 edx=00000000 esi=0000012c edi=00000000
eip=77f682db esp=0006fc10 ebp=0006fc34 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:00f6e617=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
----> Stack Back Trace <----
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0006fc34 77f04f37 0000012c ffffffff 00000000 6d38b719 ntdll!NtWaitForSingleObject
0006fc7c 6d3b14c0 00000000 ffffffff 0076219c 007e0330 kernel32!WaitForSingleObject
----> Raw Stack Dump <----
0006fc10 a0 cc f1 77 2c 01 00 00 - 00 00 00 00 00 00 00 00 ...w,...........
0006fc20 50 05 7e 00 10 2f 76 00 - 30 03 7e 00 00 30 00 00 P.~../v.0.~..0..
0006fc30 04 01 00 00 7c fc 06 00 - 37 4f f0 77 2c 01 00 00 ....|...7O.w,...
0006fc40 ff ff ff ff 00 00 00 00 - 19 b7 38 6d 2c 01 00 00 ..........8m,...
0006fc50 ff ff ff ff 9c 21 76 00 - 10 2f 76 00 a0 21 76 00 .....!v../v..!v.
0006fc60 00 00 00 00 02 00 00 00 - 00 00 00 00 30 03 7e 00 ............0.~.
0006fc70 30 03 7e 00 10 2f 76 00 - 01 00 00 00 c0 fc 06 00 0.~../v.........
0006fc80 c0 14 3b 6d 00 00 00 00 - ff ff ff ff 9c 21 76 00 ..;m.........!v.
0006fc90 30 03 7e 00 30 03 7e 00 - 00 00 00 00 30 03 7e 00 0.~.0.~.....0.~.
0006fca0 d0 fc 06 00 05 86 36 6d - 5c 05 41 6d d8 fc 06 00 ......6m\.Am....
0006fcb0 00 00 00 00 00 00 00 00 - 75 85 36 6d 30 03 7e 00 ........u.6m0.~.
0006fcc0 d0 fc 06 00 b7 85 36 6d - 50 9c 77 00 30 03 7e 00 ......6mP.w.0.~.
0006fcd0 14 ff 06 00 d2 14 40 00 - bc 03 7e 00 56 00 00 00 ......@...~.V...
0006fce0 10 28 07 00 00 00 00 00 - 43 3a 5c 6a 32 73 64 6b .(......C:\j2sdk
0006fcf0 31 2e 34 2e 30 5c 6a 72 - 65 00 6a 61 76 61 77 2e 1.4.0\jre.javaw.
0006fd00 65 78 65 00 12 00 00 00 - a0 fe 06 00 00 e0 fd 7f exe.............
0006fd10 00 00 00 00 a9 a0 f6 77 - 9c fe 06 00 00 00 00 80 .......w........
0006fd20 70 fe 06 00 00 e0 fd 7f - 00 f0 fd 7f 00 00 00 00 p...............
0006fd30 5c 00 52 00 65 00 67 00 - 69 00 73 00 74 00 72 00 \.R.e.g.i.s.t.r.
0006fd40 79 00 5c 00 4d 00 61 00 - 63 00 68 00 69 00 6e 00 y.\.M.a.c.h.i.n.
State Dump for Thread Id 0x156
eax=02c29d90 ebx=007648d0 ecx=02c29d90 edx=00000009 esi=02c29d90 edi=26dbfd64
eip=6d3318d5 esp=26dbfc6c ebp=26dbfc88 iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000206
function: <nosymbols>
6d3318c0 8d4df0 lea ecx,[ebp-0x10] ss:27cbe68e=????????
6d3318c3 e875000000 call 6d33193d
6d3318c8 5f pop edi
6d3318c9 5e pop esi
6d3318ca c9 leave
6d3318cb c3 ret
6d3318cc 56 push esi
6d3318cd 8bf1 mov esi,ecx
6d3318cf 8b5604 mov edx,[esi+0x4] ds:03b28796=????????
6d3318d2 83c208 add edx,0x8
FAULT ->6d3318d5 8b4210 mov eax,[edx+0x10] ds:00efea0f=????????
6d3318d8 85c0 test eax,eax
6d3318da 7f25 jg 6d331901
6d3318dc 7d1b jge 6d3318f9
6d3318de 83c9ff or ecx,0xff
6d3318e1 6a04 push 0x4
6d3318e3 2bc8 sub ecx,eax
6d3318e5 8b4608 mov eax,[esi+0x8] ds:03b28796=????????
6d3318e8 d3e0 shl eax,cl
6d3318ea 8b4a4c mov ecx,[edx+0x4c] ds:00efea0f=????????
6d3318ed 8d440807 lea eax,[eax+ecx+0x7] ds:03b28797=????????
6d3318f1 59 pop ecx
----> Stack Back Trace <----
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
26dbfc88 6d34d03a 02c29d90 02c37c48 22fc8df4 02c37c48 <nosymbols>
State Dump for Thread Id 0x160
eax=00000004 ebx=00000000 ecx=052c2748 edx=00000000 esi=00000320 edi=00000000
eip=77f682db esp=26dffc10 ebp=26dffc34 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:27cfe617=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
----> Stack Back Trace <----
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
26dffc34 77f04f37 00000320 ffffffff 00000000 6d38d2fe ntdll!NtWaitForSingleObject
26dffc7c 6d39ead0 00000000 00000000 00000001 00767d30 kernel32!WaitForSingleObject
State Dump for Thread Id 0x11a
eax=00000004 ebx=00000000 ecx=052c2a60 edx=00000000 esi=00000430 edi=00000000
eip=77f682db esp=26e3fbd4 ebp=26e3fbf8 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:27d3e5db=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
----> Stack Back Trace <----
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
26e3fbf8 77f04f37 00000430 ffffffff 00000000 6d38d2fe ntdll!NtWaitForSingleObject
26e3fc40 6d39ead0 00000000 00000000 00000001 007670b0 kernel32!WaitForSingleObject
----> Raw Stack Dump <----
26e3fbd4 a0 cc f1 77 30 04 00 00 - 00 00 00 00 00 00 00 00 ...w0...........
26e3fbe4 b0 70 76 00 4c b3 75 00 - 10 87 76 00 30 04 00 00 .pv.L.u...v.0...
26e3fbf4 2a 14 39 6d 40 fc e3 26 - 37 4f f0 77 30 04 00 00 *.9m@..&7O.w0...
26e3fc04 ff ff ff ff 00 00 00 00 - fe d2 38 6d 30 04 00 00 ..........8m0...
26e3fc14 ff ff ff ff 00 00 00 00 - 40 27 2c 05 b0 70 76 00 ........@',..pv.
26e3fc24 00 00 00 00 b0 70 76 00 - 30 04 00 00 00 00 00 00 .....pv.0.......
26e3fc34 f4 8f 76 00 02 00 00 00 - 00 00 00 00 64 fc e3 26 ..v.........d..&
26e3fc44 d0 ea 39 6d 00 00 00 00 - 00 00 00 00 01 00 00 00 ..9m............
26e3fc54 b0 70 76 00 40 27 2c 05 - b0 70 76 00 70 3c b3 22 .pv.@',..pv.p<."
26e3fc64 84 fc e3 26 aa e7 36 6d - 00 88 76 00 00 00 00 00 ...&..6m..v.....
26e3fc74 00 00 00 00 b0 70 76 00 - b0 70 76 00 ac 3c b3 22 .....pv..pv..<."
26e3fc84 b8 fc e3 26 0d 96 ab 00 - b0 70 76 00 d0 fc e3 26 ...&.....pv....&
26e3fc94 00 00 00 00 00 00 00 00 - 9c fc e3 26 00 00 00 00 ...........&....
26e3fca4 d0 fc e3 26 c8 52 b7 22 - 00 00 00 00 70 3c b3 22 ...&.R."....p<."
26e3fcb4 c8 fc e3 26 f8 fc e3 26 - 9f 2d ab 00 00 00 00 00 ...&...&.-......
26e3fcc4 51 76 ab 00 00 00 00 00 - 00 00 00 00 40 27 2c 05 Qv..........@',.
26e3fcd4 03 00 00 00 40 27 2c 05 - d4 fc e3 26 34 0a b8 22 ....@',....&4.."
26e3fce4 20 fd e3 26 78 0c b8 22 - 00 00 00 00 c8 09 b8 22 ..&x.."......."
26e3fcf4 18 fd e3 26 40 fd e3 26 - 76 2e ab 00 00 00 00 00 ...&@..&v.......
26e3fd04 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
State Dump for Thread Id 0x1ca
eax=00000000 ebx=00000000 ecx=00000001 edx=00000000 esi=26e7ff28 edi=00000000
eip=77f6791f esp=26e7ff14 ebp=26e7ff30 iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000206
function: NtDelayExecution
77f67914 b827000000 mov eax,0x27
77f67919 8d542404 lea edx,[esp+0x4] ss:27d7e91b=????????
77f6791d cd2e int 2e
77f6791f c20800 ret 0x8
77f67922 8bc0 mov eax,eax
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
26e7ff30 77f1cebe 0000000a 00000000 6d39138c 0000000a ntdll!NtDelayExecution
26e7ff5c 6d3af3f5 0076a380 0000000a 00000000 00000000 kernel32!Sleep
State Dump for Thread Id 0x1c8
eax=78002432 ebx=00000000 ecx=6d38ac38 edx=00000000 esi=00000120 edi=00000000
eip=77f682db esp=26ebfef4 ebp=26ebff18 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:27dbe8fb=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
26ebff18 77f04f37 00000120 ffffffff 00000000 6d38b6bf ntdll!NtWaitForSingleObject
26ebff60 6d3af53e 00000001 ffffffff 22b40f78 0076a210 kernel32!WaitForSingleObject
State Dump for Thread Id 0x15e
eax=78002432 ebx=00000000 ecx=0006fa28 edx=00000000 esi=0000069c edi=00000000
eip=77f682db esp=26effe3c ebp=26effe60 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:27dfe843=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
26effe60 77f04f37 0000069c ffffffff 00000000 6d390d49 ntdll!NtWaitForSingleObject
26effea0 6d390d8d 00000001 6d38e927 0076b370 0076b2c0 kernel32!WaitForSingleObject
State Dump for Thread Id 0x1c4
eax=00000001 ebx=00000000 ecx=26f3fc28 edx=00000000 esi=000001f4 edi=00000000
eip=77f682db esp=26f3fe80 ebp=26f3fea4 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:27e3e887=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
26f3fea4 77f04f37 000001f4 ffffffff 00000000 6d38b719 ntdll!NtWaitForSingleObject
26f3feec 6d3c1f67 00000000 ffffffff 0076b190 01e37000 kernel32!WaitForSingleObject
*----> Raw Stack Dump <----*
26f3fe80 a0 cc f1 77 f4 01 00 00 - 00 00 00 00 00 00 00 00 ...w............
26f3fe90 10 c3 76 00 50 29 76 00 - 30 b0 76 00 30 b0 76 00 ..v.P)v.0.v.0.v.
26f3fea0 e0 c3 76 00 ec fe f3 26 - 37 4f f0 77 f4 01 00 00 ..v....&7O.w....
26f3feb0 ff ff ff ff 00 00 00 00 - 19 b7 38 6d f4 01 00 00 ..........8m....
26f3fec0 ff ff ff ff 90 b1 76 00 - 90 b1 76 00 50 29 76 00 ......v...v.P)v.
26f3fed0 00 00 00 00 02 00 00 00 - cc 03 00 00 30 b0 76 00 ............0.v.
26f3fee0 30 b0 76 00 50 29 76 00 - 01 00 00 00 00 00 00 00 0.v.P)v.........
26f3fef0 67 1f 3c 6d 00 00 00 00 - ff ff ff ff 90 b1 76 00 g.<m..........v.
26f3ff00 00 70 e3 01 40 ff f3 26 - 00 00 00 00 46 29 3c 6d .p..@..&....F)<m
26f3ff10 e0 b0 76 00 30 b0 76 00 - 80 c2 76 00 30 b0 76 00 ..v.0.v...v.0.v.
26f3ff20 e0 c3 76 00 00 d8 76 00 - 08 d8 76 00 f4 db 76 00 ..v...v...v...v.
26f3ff30 54 ff f3 26 30 b0 76 00 - 30 b0 76 00 08 d8 76 00 T..&0.v.0.v...v.
26f3ff40 6c ff f3 26 02 f9 3a 6d - 30 b0 76 00 30 b0 76 00 l..&..:m0.v.0.v.
26f3ff50 30 b0 76 00 30 b0 76 00 - e0 c3 76 00 00 d8 76 00 0.v.0.v...v...v.
26f3ff60 08 d8 76 00 f4 db 76 00 - c0 c3 76 00 84 ff f3 26 ..v...v...v....&
26f3ff70 d2 f8 3a 6d 18 88 b5 02 - 30 b0 76 00 cb fe 38 6d ..:m....0.v...8m
26f3ff80 80 c2 76 00 b8 ff f3 26 - 8d 24 00 78 30 b0 76 00 ..v....&.$.x0.v.
26f3ff90 18 88 b5 02 d0 f8 06 00 - 80 c2 76 00 ff ff ff ff ..........v.....
26f3ffa0 90 ff f3 26 91 76 11 80 - dc ff f3 26 6a f5 00 78 ...&.v.....&j..x
26f3ffb0 d0 33 03 78 00 00 00 00 - ec ff f3 26 de 4e f0 77 .3.x.......&.N.w
State Dump for Thread Id 0x1ac
eax=00000004 ebx=00000000 ecx=02b73c40 edx=00000000 esi=00000500 edi=2717fbfc
eip=77f682db esp=2717fbe0 ebp=2717fc04 iopl=0 ov up ei pl nz na pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000a03
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:2807e5e7=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
2717fc04 77f04f37 00000500 000493e0 00000000 6d38d2fe ntdll!NtWaitForSingleObject
2717fc4c 6d39ead0 000493e0 00000000 00000001 0077f5e0 kernel32!WaitForSingleObject
*----> Raw Stack Dump <----*
2717fbe0 a0 cc f1 77 00 05 00 00 - 00 00 00 00 fc fb 17 27 ...w...........'
2717fbf0 e0 f5 77 00 ec b2 75 00 - f0 f4 77 00 00 a2 2f 4d ..w...u...w.../M
2717fc00 ff ff ff ff 4c fc 17 27 - 37 4f f0 77 00 05 00 00 ....L..'7O.w....
2717fc10 e0 93 04 00 00 00 00 00 - fe d2 38 6d 00 05 00 00 ..........8m....
2717fc20 e0 93 04 00 00 00 00 00 - 38 b1 32 05 e0 f5 77 00 ........8.2...w.
2717fc30 00 00 00 00 e0 f5 77 00 - 00 05 00 00 00 00 00 00 ......w.........
2717fc40 02 00 00 00 02 00 00 00 - 00 00 00 00 70 fc 17 27 ............p..'
2717fc50 d0 ea 39 6d e0 93 04 00 - 00 00 00 00 01 00 00 00 ..9m............
2717fc60 e0 f5 77 00 38 b1 32 05 - e0 f5 77 00 70 3c b3 22 ..w.8.2...w.p<."
2717fc70 90 fc 17 27 aa e7 36 6d - a0 e3 76 00 e0 93 04 00 ...'..6m..v.....
2717fc80 00 00 00 00 e0 f5 77 00 - e0 f5 77 00 ac 3c b3 22 ......w...w..<."
2717fc90 c4 fc 17 27 0d 96 ab 00 - e0 f5 77 00 dc fc 17 27 ...'......w....'
2717fca0 e0 93 04 00 00 00 00 00 - a8 fc 17 27 ac 3c b3 22 ...........'.<."
2717fcb0 dc fc 17 27 c8 52 b7 22 - 00 00 00 00 70 3c b3 22 ...'.R."....p<."
2717fcc0 d4 fc 17 27 0c fd 17 27 - 9f 2d ab 00 00 00 00 00 ...'...'.-......
2717fcd0 51 76 ab 00 e0 93 04 00 - 00 00 00 00 c0 ae 32 05 Qv............2.
2717fce0 01 00 00 00 00 00 00 00 - 01 00 00 00 c0 ae 32 05 ..............2.
2717fcf0 e0 fc 17 27 b9 c8 d6 22 - 3c fd 17 27 60 ca d6 22 ...'..."<..'`.."
2717fd00 00 00 00 00 b0 c7 d6 22 - 3c fd 17 27 5c fd 17 27 ......."<..'\..'
2717fd10 9f 2d ab 00 00 00 00 00 - 00 00 00 00 e8 a7 66 05 .-............f.
State Dump for Thread Id 0x1be
eax=02b621d8 ebx=7766b100 ecx=00000001 edx=00000000 esi=0007b2b8 edi=00000568
eip=77f682db esp=271bf6a4 ebp=271bf6f8 iopl=0 nv up ei ng nz ac pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000293
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:280be0ab=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
271bf6f8 77661202 00000568 0000052c 00000002 00000004 ntdll!NtWaitForSingleObject
271bfb60 776bb101 0000052c 271bfc00 271bfc10 00000000 msafd!<nosymbols>
271bfb98 776bb08c 0000052c 271bfc00 271bfc10 00000000 ws2_32!WSAAccept
271bfc14 00ab960d 0076fe84 271bfc58 271bfc54 271bfc28 ws2_32!accept
*----> Raw Stack Dump <----*
271bf6a4 ce 89 66 77 68 05 00 00 - 01 00 00 00 d0 f6 1b 27 ..fwh..........'
271bf6b4 d4 b2 07 00 bc b2 07 00 - 1a 00 00 00 00 44 be ab .............D..
271bf6c4 0d 17 c2 01 ff ff ff ff - ff ff ff 7f ff ff ff ff ................
271bf6d4 ff ff ff 7f 00 00 00 00 - 58 ae 07 00 ad 1f 6a 77 ........X.....jw
271bf6e4 d8 11 66 77 2c 05 00 00 - 00 00 00 00 00 00 00 00 ..fw,...........
271bf6f4 00 00 00 00 60 fb 1b 27 - 02 12 66 77 68 05 00 00 ....`..'..fwh...
271bf704 2c 05 00 00 02 00 00 00 - 04 00 00 00 00 00 00 00 ,...............
271bf714 18 69 07 00 28 88 07 00 - 66 00 02 00 00 00 00 00 .i..(...f.......
271bf724 00 00 00 00 00 00 00 00 - 08 00 00 00 00 00 00 00 ................
271bf734 00 00 00 00 00 00 00 00 - 00 00 00 00 e9 03 00 00 ................
271bf744 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271bf754 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271bf764 00 00 00 00 02 00 00 00 - 00 00 00 00 00 00 00 00 ................
271bf774 01 00 00 00 06 00 00 00 - 00 00 00 00 00 00 00 00 ................
271bf784 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271bf794 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271bf7a4 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271bf7b4 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271bf7c4 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271bf7d4 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
State Dump for Thread Id 0x1ce
eax=00ab017d ebx=7766b100 ecx=00000011 edx=00000000 esi=0007b548 edi=000005cc
eip=77f682db esp=271ff6a4 ebp=271ff6f8 iopl=0 nv up ei ng nz ac pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000293
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:280fe0ab=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
271ff6f8 77661202 000005cc 00000590 00000002 00000004 ntdll!NtWaitForSingleObject
271ffb60 776bb101 00000590 271ffc00 271ffc10 00000000 msafd!<nosymbols>
271ffb98 776bb08c 00000590 271ffc00 271ffc10 00000000 ws2_32!WSAAccept
271ffc14 00ab960d 00777e44 271ffc58 271ffc54 271ffc28 ws2_32!accept
*----> Raw Stack Dump <----*
271ff6a4 ce 89 66 77 cc 05 00 00 - 01 00 00 00 d0 f6 1f 27 ..fw...........'
271ff6b4 64 b5 07 00 4c b5 07 00 - 1a 00 00 00 f0 7a 09 b5 d...L........z..
271ff6c4 0d 17 c2 01 ff ff ff ff - ff ff ff 7f ff ff ff ff ................
271ff6d4 ff ff ff 7f 00 00 00 00 - 84 ae 07 00 ad 1f 6a 77 ..............jw
271ff6e4 d8 11 66 77 90 05 00 00 - 00 00 00 00 00 00 00 00 ..fw............
271ff6f4 00 00 00 00 60 fb 1f 27 - 02 12 66 77 cc 05 00 00 ....`..'..fw....
271ff704 90 05 00 00 02 00 00 00 - 04 00 00 00 00 00 00 00 ................
271ff714 50 aa 07 00 28 88 07 00 - 66 00 02 00 00 00 00 00 P...(...f.......
271ff724 00 00 00 00 00 00 00 00 - 08 00 00 00 00 00 00 00 ................
271ff734 00 00 00 00 00 00 00 00 - 00 00 00 00 e9 03 00 00 ................
271ff744 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271ff754 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271ff764 00 00 00 00 02 00 00 00 - 00 00 00 00 00 00 00 00 ................
271ff774 01 00 00 00 06 00 00 00 - 00 00 00 00 00 00 00 00 ................
271ff784 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271ff794 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271ff7a4 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271ff7b4 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271ff7c4 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
271ff7d4 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
State Dump for Thread Id 0x1c2
eax=00ab017d ebx=00000000 ecx=00000019 edx=00000000 esi=000005b0 edi=00000000
eip=77f682db esp=2723fba0 ebp=2723fbc4 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:2813e5a7=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
2723fbc4 77f04f37 000005b0 ffffffff 00000000 6d38d2fe ntdll!NtWaitForSingleObject
2723fc0c 6d39ead0 00000000 00000000 00000001 00780730 kernel32!WaitForSingleObject
*----> Raw Stack Dump <----*
2723fba0 a0 cc f1 77 b0 05 00 00 - 00 00 00 00 00 00 00 00 ...w............
2723fbb0 30 07 78 00 2c b3 75 00 - 00 07 78 00 b0 05 00 00 0.x.,.u...x.....
2723fbc0 2a 14 39 6d 0c fc 23 27 - 37 4f f0 77 b0 05 00 00 *.9m..#'7O.w....
2723fbd0 ff ff ff ff 00 00 00 00 - fe d2 38 6d b0 05 00 00 ..........8m....
2723fbe0 ff ff ff ff 00 00 00 00 - 38 ae b5 02 30 07 78 00 ........8...0.x.
2723fbf0 00 00 00 00 30 07 78 00 - b0 05 00 00 00 00 00 00 ....0.x.........
2723fc00 2c b3 75 00 02 00 00 00 - 00 00 00 00 30 fc 23 27 ,.u.........0.#'
2723fc10 d0 ea 39 6d 00 00 00 00 - 00 00 00 00 01 00 00 00 ..9m............
2723fc20 30 07 78 00 38 ae b5 02 - 30 07 78 00 70 3c b3 22 0.x.8...0.x.p<."
2723fc30 50 fc 23 27 aa e7 36 6d - 20 14 78 00 00 00 00 00 P.#'..6m .x.....
2723fc40 00 00 00 00 30 07 78 00 - 30 07 78 00 ac 3c b3 22 ....0.x.0.x..<."
2723fc50 84 fc 23 27 0d 96 ab 00 - 30 07 78 00 9c fc 23 27 ..#'....0.x...#'
2723fc60 00 00 00 00 00 00 00 00 - 68 fc 23 27 ac 3c b3 22 ........h.#'.<."
2723fc70 9c fc 23 27 c8 52 b7 22 - 00 00 00 00 70 3c b3 22 ..#'.R."....p<."
2723fc80 94 fc 23 27 c4 fc 23 27 - 9f 2d ab 00 00 00 00 00 ..#'..#'.-......
2723fc90 51 76 ab 00 00 00 00 00 - 00 00 00 00 08 ac 32 05 Qv............2.
2723fca0 01 00 00 00 08 ac 32 05 - a0 fc 23 27 34 0a b8 22 ......2...#'4.."
2723fcb0 ec fc 23 27 78 0c b8 22 - 00 00 00 00 c8 09 b8 22 ..#'x.."......."
2723fcc0 e4 fc 23 27 0c fd 23 27 - 76 2e ab 00 00 00 00 00 ..#'..#'v.......
2723fcd0 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
State Dump for Thread Id 0x1cd
eax=00000004 ebx=00000000 ecx=22d8b980 edx=00000000 esi=000005c0 edi=2727fc48
eip=77f682db esp=2727fc2c ebp=2727fc50 iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000206
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:2817e633=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
2727fc50 77f04f37 000005c0 0000ea60 00000000 6d38d2fe ntdll!NtWaitForSingleObject
2727fc98 6d39ead0 0000ea60 00000000 00000001 00781270 kernel32!WaitForSingleObject
*----> Raw Stack Dump <----*
2727fc2c a0 cc f1 77 c0 05 00 00 - 00 00 00 00 48 fc 27 27 ...w........H.''
2727fc3c 70 12 78 00 6c b3 75 00 - c0 11 78 00 00 ba 3c dc p.x.l.u...x...<.
2727fc4c ff ff ff ff 98 fc 27 27 - 37 4f f0 77 c0 05 00 00 ......''7O.w....
2727fc5c 60 ea 00 00 00 00 00 00 - fe d2 38 6d c0 05 00 00 `.........8m....
2727fc6c 60 ea 00 00 00 00 00 00 - 98 d3 32 05 70 12 78 00 `.........2.p.x.
2727fc7c 00 00 00 00 70 12 78 00 - c0 05 00 00 00 00 00 00 ....p.x.........
2727fc8c 4b 96 34 6d 02 00 00 00 - 00 00 00 00 bc fc 27 27 K.4m..........''
2727fc9c d0 ea 39 6d 60 ea 00 00 - 00 00 00 00 01 00 00 00 ..9m`...........
2727fcac 70 12 78 00 98 d3 32 05 - 70 12 78 00 70 3c b3 22 p.x...2.p.x.p<."
2727fcbc dc fc 27 27 aa e7 36 6d - 20 28 78 00 60 ea 00 00 ..''..6m (x.`...
2727fccc 00 00 00 00 70 12 78 00 - 70 12 78 00 ac 3c b3 22 ....p.x.p.x..<."
2727fcdc 10 fd 27 27 0d 96 ab 00 - 70 12 78 00 28 fd 27 27 ..''....p.x.(.''
2727fcec 60 ea 00 00 00 00 00 00 - f4 fc 27 27 00 00 00 00 `.........''....
2727fcfc 28 fd 27 27 c8 52 b7 22 - 00 00 00 00 70 3c b3 22 (.''.R."....p<."
2727fd0c 20 fd 27 27 50 fd 27 27 - 9f 2d ab 00 00 00 00 00 .''P.''.-......
2727fd1c 51 76 ab 00 60 ea 00 00 - 00 00 00 00 98 d3 32 05 Qv..`.........2.
2727fd2c 03 00 00 00 98 d3 32 05 - 2c fd 27 27 92 ea d8 22 ......2.,.''..."
2727fd3c 74 fd 27 27 28 ed d8 22 - 00 00 00 00 20 ea d8 22 t.''(..".... .."
2727fd4c 74 fd 27 27 84 fd 27 27 - 7d 01 ab 00 00 00 00 00 t.''..''}.......
2727fd5c 00 00 00 00 00 00 00 00 - 00 00 00 00 98 d3 32 05 ..............2.
State Dump for Thread Id 0x1b8
eax=00000004 ebx=00000000 ecx=2323ba90 edx=00000000 esi=00000924 edi=276cfc38
eip=77f682db esp=276cfc1c ebp=276cfc40 iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000206
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:285ce623=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
----> Stack Back Trace <----
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
276cfc40 77f04f37 00000924 00007530 00000000 6d38d2fe ntdll!NtWaitForSingleObject
276cfc88 6d39ead0 00007530 00000000 00000001 007dc330 kernel32!WaitForSingleObject
State Dump for Thread Id 0x18a
eax=00000004 ebx=00000000 ecx=02bbf9a0 edx=00000000 esi=000009b0 edi=00000000
eip=77f682db esp=2770fbe0 ebp=2770fc04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function: NtWaitForSingleObject
77f682d0 b8c5000000 mov eax,0xc5
77f682d5 8d542404 lea edx,[esp+0x4] ss:2860e5e7=????????
77f682d9 cd2e int 2e
77f682db c20c00 ret 0xc
77f682de 8bc0 mov eax,eax
----> Stack Back Trace <----
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
2770fc04 77f04f37 000009b0 ffffffff 00000000 6d38d2fe ntdll!NtWaitForSingleObject
2770fc4c 6d39ead0 00000000 00000000 00000001 007dda00 kernel32!WaitForSingleObject
----> Raw Stack Dump <----
2770fbe0 a0 cc f1 77 b0 09 00 00 - 00 00 00 00 00 00 00 00 ...w............
2770fbf0 00 da 7d 00 ec b3 75 00 - 80 c1 7d 00 b0 09 00 00 ..}...u...}.....
2770fc00 2a 14 39 6d 4c fc 70 27 - 37 4f f0 77 b0 09 00 00 *.9mL.p'7O.w....
2770fc10 ff ff ff ff 00 00 00 00 - fe d2 38 6d b0 09 00 00 ..........8m....
2770fc20 ff ff ff ff 00 00 00 00 - e8 ef bb 02 00 da 7d 00 ..............}.
2770fc30 00 00 00 00 00 da 7d 00 - b0 09 00 00 00 00 00 00 ......}.........
2770fc40 ec b3 75 00 02 00 00 00 - 00 00 00 00 70 fc 70 27 ..u.........p.p'
2770fc50 d0 ea 39 6d 00 00 00 00 - 00 00 00 00 01 00 00 00 ..9m............
2770fc60 00 da 7d 00 e8 ef bb 02 - 00 da 7d 00 70 3c b3 22 ..}.......}.p<."
2770fc70 90 fc 70 27 aa e7 36 6d - 20 dc 7d 00 00 00 00 00 ..p'..6m .}.....
2770fc80

I am seeing exactly the same error. I started seeing it after we started making extensive use of introspection in our code. It happens repeatably when we are load testing our software.

Adobe Acrobat 8 Professional Random Crash (Access Violation)

hi all. first time poster. long time reader.
i have encountered an odd access violation problem - 'ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at "blah" referenced memory at "blah". The memory could not be "blah" - in 'acrobat.dll' recently with a customer who is experiencing seemingly random crashes with adobe acrobat 8 professional.
they are running the application off a citrix presnetation server 4.5 server (windows server 2003 R2 with service pack 2). each server is hosting about 8 or more users per server per day. every now and then, ie once a day, adobe acrobat crashes during use. there doesn't appear to be anything consistent in so far as the action the user is performing. they will be mid-way through marking up a document and it will just crash for one of them. all the others will continue working fine.
i have access to numerous crash dumps and nothing seems to really stand out...other than 'Acrobat_3000000!AVAcroALM_Destroy'. For example...
STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
0012f96c 0343c3e1 46e4e58d 0839ce58 0012faa0 Acrobat_3000000!PDDocCreateWordFinderEx+0x59641
0012f9a0 0343c479 0000004d 00000000 46e4e5f5 Acrobat_3000000!AVAcroALM_Destroy+0x30afe
0012f9d8 0343c94a 08650e08 0000004d 0012f9fc Acrobat_3000000!AVAcroALM_Destroy+0x30b96
0012fa68 0343cea2 08650e08 0000004d 0012fab0 Acrobat_3000000!AVAcroALM_Destroy+0x31067
0012faf8 0343d0a3 08650e08 0000004d 0bbf6748 Acrobat_3000000!AVAcroALM_Destroy+0x315bf
0012fb4c 0343d8da 08650e08 00000000 46e4e7e5 Acrobat_3000000!AVAcroALM_Destroy+0x317c0
0012fbc8 03182465 08e6e808 0012fc48 00000000 Acrobat_3000000!AVAcroALM_Destroy+0x31ff7
0012fc1c 0309eeba 0bbf6748 0012fc48 00000000 Acrobat_3000000!PDPageGetFlippedMatrix+0x471d
0012fc88 030ae925 00000000 08dd9798 03098f43 Acrobat_3000000!PDDocCreateWordFinderEx+0x378ef
0012fce8 0300e9f7 0003007a 0300d5c9 000004d3 Acrobat_3000000!PDDocCreateWordFinderEx+0x4735a
0012fd04 7739b6e3 0003007a 00000113 000004d3 Acrobat_3000000!WinMain+0x24a4
0012fd30 7739b874 0300d1bf 0003007a 00000113 user32!InternalCallWinProc+0x28
0012fda8 7739ba92 00000000 0300d1bf 0003007a user32!UserCallWinProcCheckWow+0x151
0012fe10 7739bad0 0012fe54 00000000 0012fe90 user32!DispatchMessageWorker+0x327
0012fe20 0300a597 0012fe54 0012fe70 03ca2d20 user32!DispatchMessageW+0xf
0012fe90 0300aece 46e4e2e5 00d40068 03ca2d20 Acrobat_3000000+0xa597
0012fec8 0300c517 00000000 0012ff2c 00000000 Acrobat_3000000!AXWasInitViaPDFL+0x76a
0012fedc 0300c649 00000005 0040a77c 0012ff2c Acrobat_3000000!AXWasInitViaPDFL+0x1db3
0012fefc 00402d5f 03000000 00400000 001524e0 Acrobat_3000000!WinMain+0xf6
0012ff30 00403281 00400000 00000000 001524e0 Acrobat+0x2d5f
0012ffc0 77e6f23b 00000000 00000000 7ffd4000 Acrobat+0x3281
0012fff0 00000000 00403402 00000000 00000000 kernel32!BaseProcessStart+0x23
...or another...
STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
0012f6e0 222cb7ad ad0d64ee 00000000 1398c0d8 Annots!PlugInMain+0xa9198
0012f830 2091b7db 0012f934 0012f9f4 56433230 Annots!PlugInMain+0x1ca425
0012f8d4 20913957 0850f3a0 0340f043 0850f3a0 AcroForm!DllUnregisterServer+0x10798b
0012f900 0340f385 00000001 51ab7765 000000df AcroForm!DllUnregisterServer+0xffb07
0012f940 034dda17 0850f3a0 00000001 51ab77d1 Acrobat_3000000!AVAcroALM_Destroy+0x3aa2
0012f9f4 034454fa 00000000 084ce5c8 ffffff84 Acrobat_3000000!AVAcroALM_Destroy+0xd2134
0012fa14 034451cb 084ce5c8 ffffff84 000000df Acrobat_3000000!AVAcroALM_Destroy+0x39c17
0012fa3c 034451f0 084ce5c8 ffffff84 000000df Acrobat_3000000!AVAcroALM_Destroy+0x398e8
0012fa5c 033e4a92 00fd0540 084ce5c8 ffffff84 Acrobat_3000000!AVAcroALM_Destroy+0x3990d
0012fadc 033e6c01 084ce5c8 00000000 00000001 Acrobat_3000000!PDDocSetXAPMetadata+0xf227f
0012fb24 033b0fbf 00000065 000000e3 00000001 Acrobat_3000000!
...continued in next post 'cause it keeps getting truncated ?!

0012fbb4 030abb9e 00000065 000000e3 00000201 Acrobat_3000000!PDDocSetXAPMetadata+0xd9998
0012fbd4 030abd6f 00000201 00000001 00e30065 Acrobat_3000000!PDDocCreateWordFinderEx+0x445d3
0012fbf0 7739b6e3 000200ca 00000201 00000001 Acrobat_3000000!PDDocCreateWordFinderEx+0x447a4
0012fc1c 7739b874 030abd08 000200ca 00000201 user32!InternalCallWinProc+0x28
0012fc94 7739bfce 00000000 030abd08 000200ca user32!UserCallWinProcCheckWow+0x151
0012fcc4 773b0463 030abd08 000200ca 00000201 user32!CallWindowProcAorW+0x98
0012fce4 20b8e182 030abd08 000200ca 00000201 user32!CallWindowProcA+0x1b
0012fd04 7739b6e3 000200ca 00000201 00000001 AcroForm!DllUnregisterServer+0x37a332
0012fd30 7739b874 20b8e132 000200ca 00000201 user32!InternalCallWinProc+0x28
0012fda8 7739ba92 00000000 20b8e132 000200ca user32!UserCallWinProcCheckWow+0x151
0012fe10 7739bad0 0012fe54 00000000 0012fe90 user32!DispatchMessageWorker+0x327
0012fe20 0300a597 0012fe54 0012fe70 03ca2d20 user32!DispatchMessageW+0xf
0012fe90 0300aece 51ab70ed 00d40068 03ca2d20 Acrobat_3000000+0xa597
0012fec8 0300c517 00000000 0012ff2c 00000000 Acrobat_3000000!AXWasInitViaPDFL+0x76a
0012fedc 0300c649 00000005 0040a77c 0012ff2c Acrobat_3000000!AXWasInitViaPDFL+0x1db3
0012fefc 00402d5f 03000000 00400000 001524e0 Acrobat_3000000!WinMain+0xf6
0012ff30 00403281 00400000 00000000 001524e0 Acrobat+0x2d5f
0012ffc0 77e6f23b 00000000 00000000 7ffde000 Acrobat+0x3281
0012fff0 00000000 00403402 00000000 00000000 kernel32!BaseProcessStart+0x23
is 'AVAcroALM' to do with licensing?
other than advising them to bring citrix presentation server 4.5 up to date (HRP2) i'm at a loss what to advise. citrix often have issues with seamless published applications when spread across multiple monitors (as in this case), hence, my reason to ask them to bring their software up to date. often the funtion called will be different - often times 'Acrobat.dll!PDDocCreateWordFinderEx', other times 'Acrobat.dll!PDDocAcquirePage' and there are others.
i can post more of the mini-dump if required. any - and ALL - assitance appreciated.
thanks.

JVM 1.4.2 crash "access violation" Tomcat

Hi
We're getting nasty crashes with JVM 1.4.2_03 (other versions not yet been able to test) and cannot seem to find any log file with more information. However, I do have a DrWatson log which states among other things "access violation".
Situation: We're testing a webapplication on Tomcat (runs as a Windows service (Tomcat.exe) ). During testing the Tomcat-service suddenly ends, the Windows eventlog logs states something like: "...service ended unexpectedly..."
Environment: Tomcat 4.1.29, JDK 1.4.2_03, Windows 2000ProSP4, bi-processor Xeon machine.
While analyzing the DrWatson log file, I can always find the same important (I think) information in the same order:
- function: NtReadFile
- a bit further on: function: NtWaitForMultipleObjects
- function: NtWaitForSingleObject
- etc..
Other snippets I can also find every time are texts like these, they appear in the so called "Stack Back Trace"-sections of the drwtsn32.log:
!JVM_RegisterUnsafeMethods,
!JVM_RegisterPerfMethods,
ntdll!NtDelayExecution,
kernel32!Sleep,
!JVM_Sleep,
msafd!WSPSetSockOpt,
ws2_32!WSAAccept,
ws2_32!accept,
ws2_32!recv,
!Java_java_net_SocketInputStream_socketRead0.
If needed I can post the complete drwtsn32.log file, I only left it out because it's a bad practice to dump long texts. So if you want to take a look, please don't hesitate to ask !
The problem only seems to occur when the servermachine is completely left alone (and not logged in or in locked state) Additionally, it usually occurs after between 30-60 minutes or so. When I keep monitoring (logged in) the machine while the tests are running the crash doesn't seem to occur ?! This makes me think it could be an issue with power-saving that kicks in, like e.g. with the network-adaptor ?
If we don't use JNI, and "access violation"s are stated, does this mean it's a JVM-issue or ... ? Or is it more likely it's an issue of this Tomcat.exe ?
On a sidenote, does anyone know why a logfile might not be produced, and if there is anything i could try to make the jvm produce some intelligable output upon crashing?
Kind regards,
David

Hi again,
First of all thanks for the valuable help so far !
As I'm still searching an anwser for the problem, I noticed the drwtsn32.log file also (sometimes) mentions HotSpot, this is a line from my drwtsn32.log file:
mov ecx,[gHotSpotVMLongConstantEntryValueOffset+0x13f48[/i]
Now, I'm not an expert on HotSpot, but I too know there have been numerous problems reported before with this technology.
Ramesh, it sure looks like your hypothesis about the runtime compilation corresponds to this problem a lot.
Additionally, I must also mention the fact that the problem only seems to occur during stress-tests (concurrency-problem?) and is NOT reproducable reliably. All of this makes me think even more that it's a JVM problem of some kind, what is your (anyone) opinion about this ?
Again, thanks for your support, it sure helps a lot !
Kind regards,
David

Labview 2012 Runtime Ubuntu

Hello. I am trying to distribute a compiled labview program on Ubuntu linux machines. However, I can't seem to get the Labview Run Time Enviroment to install on Ubuntu in order to run the executable. Has anyone managed to do this? I have tried using Alien to convert the .rpm into a .deb. However, whenever I do this I get a weird Alien error that I can't seem to debug:
Error executing "rpm -qpi 'labview-2012-rte-12.0.0-1.i386.rpm'": at /usr/share/perl5/Alien/Package.pm line 489.
I would appreciate any help.

This configuration is not officially supported by NI, but this forum post may be helpful to you:
http://forums.ni.com/t5/LabVIEW/LbVIEW2012-Linux-Ubuntu-12-Installation/m-p/2304470
Applications Engineer
National Instruments

Applications crashing with dyld error messages: CFURLStorageSessionGetDefault

All was working fine (been told to hold off on updates so have not installed them, yet I am running 10.6.8 [10K549]). Suddenly after a reboot applications crash with the same error:
Dyld Error Message:
Symbol not found: __CFURLStorageSessionGetDefault
Referenced from: /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
Expected in: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
Can not open Terminal. Can not open Skype (removed 2.x version, downloaded latest 5.3.59 and installed), can not run Evolution (starts, but when clicking a message same error). Attempted to install 10.6.8 bundled update (manual download), but when selected to open get yet again - the same crash error.
Was able to create a new user and same issues with that account. Any help?!

My system has a PGP encrypted disk (so no booting from CD to fix). It appears that one of Apple's AUTO updates (though I have them manually turned off!!) has screwed my system to the point of making the OS show up as a version that is not running. Due to the versioning not being right the applications crash. The verdict: rebuild.
So yeah, this *****.

LabVIEW 2012 f1 Patch crashes

I've just installed LabVIEW 2012 and unfortunately I've already run into some troubles.
I received a "Setup has stopped working" when I installed the device drivers. But the installation appeared to be fine. LabVIEW started and MAX would open. I did not try connecting to any hardware yet.
When attempting to install the f1 patch, LabVIEW crashed again. Subsequent retries net the same thing.
Has anyone else had this trouble with the patch?
This is on a Win7 machine with LV 8.6, and 2011 previously installed.
Patrick Allen
Solved!
Go to Solution.

Why do you have LabVIEW open when you are trying to install a patch? Are you running other versions of LabVIEW when performing the install? It is highly recommended you are not running anything NI when running installers from NI.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Labview 2012 Runtime Application Crash: Access Violation Error

Similar Messages

Maybe you are looking for