Labview 2014 crashing(windows 7)

Hello for some reason my labview 2014 crashes when i try to open the labview application. It was working fine until yesterday but not having any luck today. Also i cannot see my labview software in the programs and feature section on the control panel even though i have administrative privileges in my computer. I have attached my error report below.Any help would be appreciated.
Attachments:
crash_report.PNG ‏109 KB

Hi go_sa,
In Programs and Features are you looking under National Instruments Software for LabVIEW 2014? If so, and LabVIEW is not listed, have you tried re-installing the software?
If it is listed under National Instruments Software, it sounds like there may be some software corruption causing the error. The next step would be to try repairing the program. If this does not work, you can try force re-install the program (link below) or uninstalling and reinstalling it.
http://digital.ni.com/public.nsf/allkb/ADD22E807D5A12AD862579EC00760F79
Julia P.

Similar Messages

Edge Animate 2014 crashes Windows explorer

While working with Edge 3.0 there were no conflict between win7 and edge. But when my html5 development team updated edge 3.0 to edge 2014 all of us getting this error : "Windows explorer has stopped working" while rightclicking on desktop or copying files from a folder to another. I get this error even while doing nothing (no clicking or pressing keys). And my solution for this crash is rolling back for now. Uninstalled edge 2014 and reinstalled edge 3.0 everyrthing is okay. So is this common error for you guys? Anyone knows a solution?

Hi preran,
it's the desktop explorer not the browsers. Adding screenshot... as you can see animatecc2014 even not opened but when I uninstalled it and installed edge 3.0 I don't get this error anymore.

USB-6009 with Labview 2014 on Windows 8.1

Hi,
I have trouble connecting USB-6009 OEM with my new laptop with windows 8.1. My USB-6009 OEM device is not shown up in NI Max. So when I check Device Manager, there is a question mark on "NI USB-6009 OEM FW". I tried to install Labview 2011 but still the same. When I tried to choose the driver in Device Manager manually, I can only find NI-VISA driver as the closest one. It is still not working when I open DAQmx to check my card. It is still not detected in NI Max and anywhere within labview. When I used NI-VISA driver, and try to connect the device in NI Max, I get timeout error. I think I need to see NI-USB driver instead of NI-VISA driver. Any help would be appreciated.
Cheers,

Hi Thoo,
You may also want to try reinstalling the DAQmx 14.5 driver first. DAQmx 14.5 is supported on Windows 8.1. Some of the driver files may have been corrupted and reinstalling the driver may solve the issue. If not, using the DAQmx Base driver could be a good option as Dennis suggested.
Thanks,
Frank
Application Engineer
National Instruments

LabVIEW 2014 x64 AppCrash StackHash crash

Our application is crashing somewhat inconsistently in the x64 compile, but not the x32 compile. We are using LabVIEW 2014. When it crashes, LabVIEW stops responding and has to be closed from windows. The View Details feature says it's AppCrash and further says StackHash_someHEXnumber. Another member of the team analyzed dump files and seemed to think it's crashing in the LabVIEW run time.
Any known issues out there that would explain this?
It happens on the original release of LV2014x64 and SP1. It happens in LabVIEW and in a compiled executable. If is not consistent, if we open the software and start running tests, sometimes it will never crash, other times it will crash before 1500 test runs. Our way of testing this has been to run 1500 runs, then close it then reopen it, run again. If it doesn't crash within 3 times of doing 1500 runs, we say that the crash probably isn't going to happen in that version of the software. So we've been selectively disabling parts of the software trying to figure out which code is triggering the crash.

Some more information:
In addition to not happening in LV2014x86, it does not happen in LV 2014 MacOS x64. So this is specific to LV 2014 Windows x64. Furthermore, if we save our code to previous and open it in LV2013x64 there's no crash (there's some hickups with the downgrade so it's not 100% apples-apples though) .
We have narrowed the crash down to a specific changelist in source code control. In that changelist we changed the architecture of how we pass messages around in our program. We used to use User Events to pass messages and the vi listening would subscribe to the user event. However, we found this created a memory leak in LV2012. So we switched to a queued based messaging architecture in this changelist. We created a variant which held the queues as a variant attribute associated with the message enum. This was so that when a message is sent we could do a fast lookup by taking the message and getting a varriant attribute associated with it (thus giving us the queues subscribing to that message). When we introduced this in LV2012 we stressed tested it all and it worked great. Later we upgraded to LV2014 and that's when the crashing started, we have gone back to this specific changelist and tried it with LV2014 it crashes.
We have found other parts of our code which if we disable the crashing goes away. Our suspicion is that this occurs due to a perfect storm of calling vi's asyncronously (which call other vi's ascncronously), passing messages to them via queues, and maybe the variant's containing queues in attributes. Based on what various programmers have seen via a variety of observations, our suspicions are that some combination of those circumstances is triggering some sort of LV2014 windows x64 bug.

Adobe photoshop cc 2014 crashes at startup / GC driver up to date (nvidia 740M) / windows 8 / uninstalled software reinstalled disconnected creative cloud and reconnect / nothing solved /error report ready to send

Help
in this for 3 and a half hours now and really nervous bout it.
adobe photoshop cc 2014 crashes at startup /
solely photoshop : lightroom illustrator indesign okay /
GC driver up to date (nvidia 740M) /
windows 8 /
uninstalled software and reinstalled from creative cloud app /
disconnected profil creative cloud and reconnect /
moved preferences out /
I just have installed a fresh OS windows 8 and nothing but the adobe apps /
nothing solved /error report ready to send
(edit)
funny cannot send the image of the errors because i DO NOT have a photoshop working version !)
(did the screen copy, exported in jpeg srgb from illustrator)

exported the error log from lightroom still not working as it seems like the file (it's a screenshot) is more than a 8mo size file !
i ignored i was using a 8k screen till now
please help
Cheers,
Arnaud.

Premiere Pro CC 2014 crashing on export using Windows 8.1

Hello
I am using Windows 8.1 and ever since I did the most recent update of creative cloud for my apps PR CC 2014 crashes every time I export to media encoder, I have found a little work around by opening media encoder and choosing the file I want manually, but as I type this the video is rendering so I don't know if there will be any visual or audio bugs as a result.
Is there a fix for PR CC, 2014 export issue on windows yet?
I did look through the forum a little before writing this but all the other threads regarding this issue are on MAC and I'm running Windows.
Thanks for any help
Andy

What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Labview logging program crash windows after 2 days

I am using Labview 8.0, and running the executable the program. What this program does is that it acquires data and then writes to hard drive. Each set of data is small but it writes also every second. It will create a new file every day so the file does not get too big.
After 2~3 days running, it crash windows. I think it somehow used up all the resource so the windows would not even response any more. And we need to run this program continually for at least one month.
So is this a memory leak problem of the executable program generated by Labview app builder? or could that be Labview does not release memory after it writes data to the file, and eventually used up the resource?
any suggestions?
Thanks

It is on a laptop with win xp, 1GB Ram. each data is only 40~50 bytes. The concatenate strings does not duplicate in memory, right? what about build path and open file? Do I need to close the file inside the loop? It is a very small program so I attached a screen capture here.
I am going to let it restart again and check memory usage tomorrow.
Thanks,
Attachments:
screen shot.gif ‏36 KB

LabVIEW 8.6.1 Installation Builder Crashes Windows 7

Hello, my very helpful friends. I have what I think to be a rather complicated issue and for which I've run out of ideas. Recently, I had to go through the dreaded enterprise wide Windows 7 upgrade. Upon completing that slog, I reinstalled LabVIEW 8.6.1 onto my machine by going to the distributions folder and installing each piece one at a time. After completing this process, I opened a pre-existing project (stored on a separate server) which had some pending changes in a couple VIs which needed to be incorporated into the executable and installation builds. The executable build worked without a hitch, but when I attempt to build the installation, I get most of the way through the build, but then it crashes Windows 7 via the blue screen once it gets to this point in the build:
This is at the part where the progress bar stops proceeding for a minute or so. I've tried deleting the installation and executable builds from the pre-existing project and recreating them, but that didn't work. I've also tried completely reconstructing the project from scratch to no benefit either. I've been able to succesffuly build both executables and installers in other projects since upgrading to Windows 7 so it seems particular to what's going on in this project. The only other bit of information I can think of which might be useful is that every now and then, building the installer only crashes LabVIEW and not full Windows 7.
Any ideas or suggestions are appreciated. Thanks in advance!
Andrew

I never tried using this, but one of the options you could consider...
http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7
TailOfGon
Certified LabVIEW Architect 2013

File dialog crashes LabVIEW 2014 on Mac OSX Yosemite

I know that Mac OS 10.10 (Yosemite) is not technically supported by LabVIEW 2014. If that's the only answer to this question, then so be it.
The following causes LabVIEW 2014 to crash on Mac OSX 10.10 (Yosemite):
1. Run the native File Dialog in LabVIEW 2014 (Express VI) , using "New or Existing File" as the selection mode
2. Select "New File..." when the file dialog appears
3. Enter anything as the file name and click OK
4. LabVIEW either crashes immediately, or hangs indefinitely and must be force quit.
Is there an update for LV 2014 (and the RTE) that does support Yosemite?
This bug makes deploying apps to the Mac basically impossible, Yosemite is the latest OS. Does anyone have a workaround for the issue?
Thanks.

LabVIEW 2014 SP1 seems to solve that problem here on my Mac OSX 10.10 system.
Now Apple may be nice for end users, but all those Apple fan boys sure would think a little different about it, if they had to write programs on the Mac. Apple keeps changing its APIs and their behaviour continously, inventing new APIs (which is fine) in a rapid pace, only to depreciate and remove older APIs at almost the same speeed!
Microsoft sometimes goes to the other extreme with maintaining backwards compatibility but working with Apple systems surely isn't easy as a programmer (unless maybe when one uses their high level click and point together web design applications, but I don't know that).
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Photoshop CC 2014 on Windows crashes everytime

Hello
I have Adobe CC installed on my work computer and a handful of the apps on my home computer. Just tried Photoshop CC 2014 on the home PC (Intel i7, 8MB RAM, AMD7570 gfx) and it ALWAYS crashes after the launch and initial prompt to import settings. Photoshop CC 64-bit (earlier version) is running fine. It doesn't matter if I say yes or no to the import settings.
Crash log has all this...
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 15.0.0.58
Application Timestamp: 536b438e
Fault Module Name: aticaldd64.dll
Fault Module Version: 6.14.10.1607
Fault Module Timestamp: 4ea7647e
Exception Code: c0000005
Exception Offset: 0000000000441382
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: dd55
Additional Information 2: dd55198a6a1e8431eebab190b03ca471
Additional Information 3: 8159
Additional Information 4: 815945626f49fa66c5afed4cff35fc96
I have installed the 7.2 release of Extension Manager CC. Little else can be tried since it crashes so quickly.
Thoughts?

Thanks John,
That put me on what should have been a straightforward update drivers path. And ultimately was the correct answer.
I did not mention this was a Dell XPS 8500. It may have been some misstep I took or some proprietary quirk of Dell, but ultimately the Catalyst Control Center would not recognize the card or load any drivers. At one point it said I had a mobile device (?).
So I went back to the Dell site with my service tag and got their update utility. It said I needed a video driver update (among other things I never use) and did its work.
Now Catalyst reports I have an AMD Radeon HD 7570 with a BIOS date of 2012/01/16. I'm pretty sure there are newer, but at least my problem with Photoshop CC 2014 crashing is gone.
Thanks again!

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Photoshop CC 2014 crash when opening or creating new files when running with Cintiq 13HD.

I have a problem where Photoshop CC 2014 crashes when trying to open or create a new file while the Photoshop window is being displayed on my Cintiq 13HD.
When Photoshop is being displayed on my main monitor it doesn't crash.
I'm running Windows 7 (64 bit) and have updated my graphics and wacom drivers to their latest versions and Photoshop is completely up to date. (I'm running the 30-day free trial)
Here's the event log of the crash:
Faulting application name: Photoshop.exe, version: 15.2.1.257, time stamp: 0x543dbc5e
Faulting module name: atig6txx.dll, version: 8.14.1.6398, time stamp: 0x54176130
Exception code: 0xc0000005
Fault offset: 0x00000000000122b7
Faulting process id: 0x23dc
Faulting application start time: 0x01d0030b1092334e
Faulting application path: D:\Program Files (x86)\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\Windows\system32\atig6txx.dll
Report Id: 61680f48-6efe-11e4-aeeb-bc5ff45851ea

As you can already see, your ATI/AMD video card drriver is crashing.
Update the driver from AMD's website to pick up all the bug fixes you are missing.

Premiere Pro CC 2014 and Media Encoder CC 2014 Crashing constantly

Running out of options and ideas...
Symptom: Every time I work on any project in Premiere Pro CC 2014 or try to render out in Premiere Pro CC 2014 or Media Encoder CC 2014, the software crashes after 2-3 minutes of use/rendering when the GPU is enabled in Premiere/Media Encoder, or after 5-10 minutes of use/rendering in software only mode. The crash is a software crash, Windows continues to run fine.
I have tried all the standard list of steps that adobe reps post on threads like these - clearing media cache, software only on render, new project, etc. https://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html
Windows event is not that helpful to me:
Faulting application name: Adobe Premiere Pro.exe, version: 8.2.0.65, time stamp: 0x5486db4a
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00007ff5ecb4de40
Faulting process id: 0x1dc8
Faulting application start time: 0x01d04a503cd82df2
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: unknown
Report Id: cacdfbab-b717-11e4-826d-8863dfc268bc
Faulting package full name:
Faulting package-relative application ID:
I have wiped adobe off the machine and reinstalled - same problem. I have tried projects that crash the machine on other machines and it works fine.
The machine is new, clean install and runs everything else great - 3ds max, high res games, scientific computing - max memory use, etc.
Spec:
5K iMac running bootcamp and Windows 8.1
Intel Core i7-4790K @ 4.0 GHz
32 GB ram
1TB SSD
AMD Radeon R9 M295X 4GB GDDR5
I have used this bootcamp/imac configuration for 5+ years on 3-4 machines and everything has always just worked great. Guess it was my time for a problem, but I'm open to new ideas to try...
Finally - I hope someone from Adobe reads this. I have spent 2 nights on the phone with support. The first night I got an over confident answer that it's a gpu driver issue, just go with software only (no luck - same crashes and different drivers aren't solving the problem). Tonight I was hung up on "by accident" as the agent looked up my video card after waiting 15 minutes to talk to someone, only to be hung up on a second time while on hold after calling back and waiting 20 minutes (because I assume the Adobe call center closed). No message to say so, just hung up on. An overall very disappointing experience.
Thanks in advance to anyone with ideas on things to try,
Cheers!

I am having a similar problem.
Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
My timeline is 2K, 58 minutes in 23.976
Only effects applied are Lumetri LUTs - no third party.
I've exported as recently as a week ago without issue.
Running OSX 9.5 on an X99 board
3.75 GHz 8-core
64GB 2400 MHz RAM
EVGA Titan Black 6GB
Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
Thanks Adobe, for checking this out.

Photoshop CC 2014 crashes right after start in Win7 Ultimate. amtlib.dll seems to blame.

Photoshop CC 2014 crashes right after start in Win7 Ultimate. Installed a new graphics card MSI GeForce GT730 and did an immediate driver update. Also completely updated Windows. Bridge and Lightroom 5.5 work fine. After several attempts to get PS up and running, also after checking possible solutions on the web and in this community I was still left with a crashing application.
Then tried a cracked amtlib.dll in the Photoshop directory and PS worked fine! But not able to check in to CC. Then replaced the cracked amtlib.dll with the original and PS again crashed a few seconds after launch. Oh, and yes, I did check out of Creative Cloud and checked in again but nothing worked so far.

After browsing through several sites I finally stumbled upon the message below, posted a couple of months ago in this forum.
This sequence finally was the solution to my problem with Ps crashing after launch.
PROBLEM SOLVED!!
After dozens of fruitless attemps to solve the problem and many, many hours of searching the web, I stumbled upon a thread in the PS community that helped me fix the problem and made my day (weekend).
The thread was originally posted by MrNameloc here and ALL CREDITS got to him. A public "Thank You" to MrNameloc is also in its right place.
The solution is as follows:
Un-install Photoshop CC.
Un-install Adobe CC.
Go to: C:\Program Files (x86)\Common Files\Adobe and find SLCache and delete it.
Go to: C:\ProgramData\Adobe and find SLStore and delete it.
Restart.
Install Adobe CC.
Install Photoshop.
Restart.
@Adobe, you might wanna write this one behind your ear just in case it shows up again in the forums... 'cose it will.

Cc 2014 crashes

I have installed and de-installed Photoshop 2014 CC two times - still it crashes.... My Photoshop 5,5 runs fine.
But since I have ordered and installed CC 2014 I work only on the technical side. I do not get the plug ins (e.g. Topaz adjust seen in 2014 CC nor I can be sure that 2014 CC crashes next time I get in ......)
I am very unhappy with the situation - I installed it first yesterday since then I could work only a bit (maybe 20 minutes)....
I tried alredy some Ideas I found by Googele (start PS as Admin, re-install etc) but nothin works.
I have installed my Windowws 7 just new - so its very clean!
My system is:
Operating System System Model
Windows 7 Home Premium (x64) Service Pack 1 (build 7601)
Install Language: Deutsch (Deutschland)
System Locale: Deutsch (Deutschland)
Installed: 23.08.2014 21:52:17
Display
Samsung SyncMaster [Monitor] (7,2"vis, s/n 1463956023, Februar 2011)
Why is PS shown as Trial?
Adobe Systems - Adobe Photoshop CC 2014 (trial)
Thanks for help
George

What do the Window 7 reliability history crash reports show is the cause of the CC 2014 crashes? The Windows UI in German should look something like this:

Labview 2014 crashing(windows 7)

Similar Messages

Maybe you are looking for