Labview 6.0 cannot call ActiveX functions after upgrading to Teststand 2

I'm running on Win2K on my development system. I have been running fine with Teststand ver 1.0.3 and Labview 6.0 with several VI's using ActiveX to work with the TestStand engine. I tried installing TestStand 2.0 (dated Aug 2001) next to 1.03 (not on top of it) to start upgrading and all those ActiveX VI's no longer functioned.
NI's documentation says Teststand 2 installs the LV RTE 6.02 on the system and to run a "REPAIR" on the LV RT Server 6.02 if installing LV 6.0 after Teststand (not my case). I ran the "repair" anyway to no avail.
I tried running NI's ActiveX example "Write Table to XL.vi" and it also does not run (Error -2147024891, "Access is denied.
in Open Excel and Make Visible.vi->Wr
ite Table to XL.vi"). I have run this before just fine.
I've even tried re-installing LV 6.0 and re-running the repair to no avail, also mass compiling everything in site. Always the same error!
Please help, anyone. My system is DOWN!.....

We have not seen this exact problem before with TestStand 1.0.3, 2.0, and LabVIEW 6.0. If your system is still down, please give us a call and we can talk through getting everything working. You can make a phone support request online by going to Request Support and choosing "Phone NI" from the Communication Method Pull Down menu.
Regards,
Shannon Rariden
Applications Engineer
National Instruments

Similar Messages

  • Facetime cannot call my contacts after upgrading to iOS 8

    My Son
    Is getting frustrated that he cannot call any of his friends on Facetime after upgrading to iOS 8.
    We have reset all his settings, gone through the 11 troubleshooting steps here:
    http://www.macworld.co.uk/how-to/iphone/11-fixes-for-when-facetime-is-not-workin g-3527872/
    Also we have restarted the device several times and updated to 8.0.2.
    Any suggestions on how we can fix this?
    Thanks,

    Can you receive FT calls?
    What exactly happens when you try to call someone with FT? Error message?
    Have you tried when connected to another network?

  • Cannot End Call on Q10 after upgrading to OS 10.2

    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

    marootz wrote:
    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
    From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Call javascript function after submit process

    Hi,
    How can I call javascript function after my submit process ?
    Thanks.

    Hi Carl,
    You say that I must have an Item or region that contains my js with conditionnal display. With this method I can execute my js with specific request value.
    My problem is that I tried to integrate the "save large value workaround" in my application with the APEX wysiwyg (fckeditor). To do that I have to call the javascript function clob_submit on the save button. This function save the value of my field but if I want to save other item value, how can I do that ?
    If I use your method, I will submit the page, save the other field and after that, I will branch on the same page. At this moment, I will execute my javascript file.
    Is it what did you said ?
    Sylvain Michaud
    Homepage : http://www.insum.ca
    InSum Solutions' blog : http://insum-apex.blogspot.com

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

  • I cannot view my videos after upgrading to OSX

    I cannot view my videos after upgrading to OSX. Each video I try to open the message on the black background is Blocked Plug-In. In system preferences I have the latest Java but Flash Player does not upgrade to Flash 12 after numerous attempts.

    HI MortenEJ,
    Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
    I still encounter the same problem. I have important messages in my inbox I want to keep. 
    I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

  • I cannot edit my contacts after upgrading to IOS5 .

    I cannot edit my contacts after upgrading to IOS5 . I can restore to factory settings but I want to keep my messages as they were.. what can I do? please someone help.. thanks in advance.

    HI MortenEJ,
    Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
    I still encounter the same problem. I have important messages in my inbox I want to keep. 
    I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

  • Cannon MP830 can't use the scanner function after upgrading to Mavericks.

    I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks.  Can someone help?

    There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

  • Cannot open aperture v3 after upgrading to  OS 10.6.8.  Bought the upgrade online so cannot reload the software.  Can you help?

    Cannot open aperture v3 after upgrading to  OS 10.6.8.  Bought the upgrade online so cannot reload the software.  Can you help?

    How did you buy it online? Did you buy a registration number from the Apple Store?
    Then you can download the Trial version from this link:
        Aperture 3.1 Trial 
    and run Software Update immediately after installing.
    Go to the Applications folder and delete Aperture.
    Download the Aperture 3.1 Trial.
    Open the Aperture Trial disc image.
    Double-click the "Aperture Trial.mpkg" file.
    Follow the onscreen instructions to install Aperture.
    After the installation completes, choose Software Update from the Apple () menu.
    Cannot open aperture v3 after upgrading to  OS 10.6.8. 
    But what exactly is the error you get, when you try to launch Aperture? Maybe you need to do more than updating.
    Regards
    Léonie

  • How itunes cannot sychrnoise with iphone after upgrading latest IOS

    why itunes cannot sychrnonise with iphone after upgrading the latest IOS?

    Sounds like your iPhone was previously hacked/jailbroken. If true, try using google.

  • Calling ActiveX function

    I am using an ActiveX function that has following format (in C++)
    HRESULT GetLuminanceImage([in] long aMax,
    [out,size_is(aMax)] float fBuffer[],
    [out, retval]short *sRet);
    How can I call this function in labview.
    I need to know how to define the parmaters in Call library function node in Labview
    Thanks in advance.
    -SK
    Message Edited by CKSlv on 01-20-2006 03:11 PM

    Hi Lycangeek ,
    I got stuck in the same kind of problem , I am using Automation open to load my COM library.
    My Com dll is having an exposed function like
    CAN_Write([in]long ID,[in] long DLC, [in,size_is(DLC) unsigned char* Data,[out,retval]long *pRetStat);
    But when i am calling this function using automation invoke node in labview the Data is not a pointer reference its just accepting unsigned char Data . Can you please let me know how shall i pass the data to this array?? Or shall i need to change my DLL function...
    Thanks in Advance.

  • Cannot call AS3 Function from JavaScript

    Hi,
    I am trying to call an ActionScript 3 function with JavaScript. The problem I cannot seem to get any of the browsers to trigger this AS3 function. The debuggers say that the function is undefined when I call it on the flash object. 
    What is supposed to happen is - the javascript function calls the AS3 function, and passes it an integer value.   That integer is then used to pull one of 20 swfs, and load that into the flash movie.
    Please let me know if you guys can think of anything that I can do to make this work!  I've been stuck for hours, and can't seem to make it happen.
    Here is my actionScript:
    import flash.net.URLRequest;
    import flash.display.Loader;
    import flash.external.ExternalInterface;
    var movies:Array = ["idle-ok.swf", "idle-good.swf"];
    // It first loads this "hello swf".
    var helloLoader:Loader = new Loader();
    var helloURL:URLRequest = new URLRequest("idleAvatar.swf");
    helloLoader.load(helloURL);
    addChild(helloLoader);
    var setAvatar:Function = loadAvatar;
    ExternalInterface.addCallback("callSetAvatar", setAvatar);
    // Then, this function should be called by JavaScript to load one of the other swfs.
    function loadAvatar(indx:Number){
        var url:URLRequest = new URLRequest(movies[0]);
        var ldr:Loader = new Loader();
        ldr.load(url);
        addChild(ldr);
    Here is my JavaScript:
    <script type="text/javascript">
    function callExternalInterface(val) {
              document.getElementById("loader").callSetValue(val);
    </script>
    Here is my embed code:
    <div>
    <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="250" height="350" id="loader" name="loader">
    <param name="movie" value="loader.swf" />
    <param name="allowscriptaccess" value="always" />
    <!--[if !IE]>-->
    <object type="application/x-shockwave-flash" data="loader.swf" width="250" height="350">
    <param name="allowscriptaccess" value="always" />
    <!--<![endif]-->
    <a href="http://www.adobe.com/go/getflashplayer">
    <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
    </a>
    <!--[if !IE]>-->
    </object>
    <!--<![endif]-->
    </object>
    </div>
    <a href="#" onClick="callExternalInterface(1)">CLICK</a>

    You don't appear to be calling any function in your actionscript.  The names between and within do not agree. 
    document.getElementById("loader").callSetValue(val);
    should be calling a function identified with the string "callSetValue" in your actionscript, but you only have a function identified with "callSetAvatar"  and the function associated with that on your AS3 side is specified to be setAvatar...
    ExternalInterface.addCallback("callSetAvatar", setAvatar);
    but you do not have a function named setAvatar, you have one named loadAvatar
    Here's a link to a tutorial that might help you to see how the functions are specified between javascript and actionscript using the ExternalInterface class.  It gets confusing so I suggest you copy the code to a word processing file so you can clearly highlight where they have the same language between them.
    http://viget.com/inspire/bi-directional-actionscript-javascript-communication

  • Cannot call member function on object type

    On 8.1.6 I cannot call a member function from SQL in the way described in the manual.
    The following example is almost copied from the manual:
    create or replace TYPE foo AS OBJECT (a1 NUMBER,
    MEMBER FUNCTION getbar RETURN NUMBER);
    create or replace type body foo is
    MEMBER FUNCTION getbar RETURN NUMBER is
    begin
    return 45;
    end;
    end;
    CREATE TABLE footab(col foo);
    SELECT col,foo.getbar(col) FROM footab; -- OK
    select col,col.getbar() from footab; -- ERROR
    The second select is the way it should be, but I get an error "invalid column name".
    Using the first select, I get the result. This is strange because this is more or less the 'static member' notation (filling in the implicit self parameter myself).
    Is this a known bug in 8.1.6, maybe fixed in later versions?

    Konstantin,
    Did you use loadjava to load the compiled class into the Oracle Database?
    Regards,
    Geoff
    Hello!
    I need to write a member function for object type with java.
    for example:
    create type test as object(
    id number,
    name varchar2(20),
    member function hallo return number);
    create type body test as
    member function hallo return number
    as language java
    name 'test.hallo() return int;
    create table test of test;
    My java-file is:
    public class test {
    public int hallo() {
    return 5;
    select t.hallo() from test t;
    It's does not run. Why?
    I get always an error back. Wrong types or numbers of parameters!!
    please help me.
    thanks in advance
    Konstantin

  • Executable created in LabVIEW 7.1 containing Call Library Function Node runs but creates error when Call Library Function Node is executed

    I have created a simplee application that controls a piece of equipment with all control via a supplied dll.  Hence, there are a number of Call Library Function Nodes within the code and a modicum of other LabVIEW code.  Everything works fine as a LabVIEW application, but when converted to an executable, although the application runs and functions, as soon as any Call Library Function Node is executed, calling from the dll, I get the C++ debug error in the attachment.
    Is this something that I can solve from within LabVIEW, or is the problem likely buried in the dll?
    Damian
    Attachments:
    CLFN error.JPG ‏22 KB

    Hi Wise,
    Try building an executable from a very simple VI that makes one call to the dll. Have you also try using the Call Library Function node on other simple dlls that you know will work?
    Regards,
    Stanley Hu
    National Instruments
    Applications Engineering
    http://www.ni.com/support

  • ActiveX problems after upgrading to 7.0

    I upgraded from 6.1 to 7.0. I kept the 6.1 version intact. Afterwards the ActiveX functions did not work in either version. For example, the 3D plots within Labview did not work. I had to uninstall 7.0 and reinstall 6.1 for it all to work again. Any comments?

    Greg McKaskle wrote in message news:<[email protected]>...
    > > I upgraded from 6.1 to 7.0. I kept the 6.1 version intact.
    > > Afterwards the ActiveX functions did not work in either version. For
    > > example, the 3D plots within Labview did not work. I had to uninstall
    > > 7.0 and reinstall 6.1 for it all to work again. Any comments?
    >
    > I suspect that this isn't a general ActiveX problem, but a problem with
    > the specific 3D graph control. I don't really know why that happened,
    > but the first thing to do would be to install 7.0, on a safe machine and
    > see if other ActiveX, such as to Excel, or dropping the calendar control
    > works or not. You might then want to search the support site and see if
    > this is alr
    eady known, otherwise contact them and see if they can help
    > you debug it.
    >
    > Greg McKaskle
    Here is a simple test I would do if I fall into such a problem.
    I would install LabVIEW Express(7.0)on a windows 2000 machine (a clean
    machine would be prefereable).
    Then drop a automation open function. Create a Control and then select
    an ActiveX class to the Microsoft Common Dialog Control Version 1.0
    type library.
    Select the CommonDialog (MSComDilg.CommonDialog.1) object.
    You can select any of the objects depending on the type library
    choosen.
    Now go back to the diagram and drop the property node. Connect the
    property node and take care the error handling. Now by selecting
    different properties, one ata time you can check if there is any error
    returned.
    Repeat the same procedure with LV 6.1.
    If there is an error returned in one property when using LabVIEw
    Express but it works fine with LV6.1, then probably this is to be
    reported to an Application engineer of NI.
    Good luck

Maybe you are looking for