Labview 6.1 on Windows XP laptop with NI-DAQ 7.2

Installed PCMIA DAQ 6036E card with NI-DAQ 7.2on my laptop. Running XP and LabView 6.1. In Measurement Explorer I am only able to choose the +/-10V range. Expecting 4 ranges down to +/-50mV. Chose the traditional settings and not those used only for LabView 7.0.

Hello,
how is it illustrated that you can only change the +/-10V range in MAX? Do you get an error message by changing the values?
Normally, when you create a virtual channel in MAX you can change the unit and the range in the channel assistant. After the channel is created you can still change unit and range in the properties of the channel. The scope you choose does adjust automatically to the nearest range which is available for this DAQ-Card.
Regards
Thomas D.
NI Germany
(SRQ 210415)

Similar Messages

  • My windows 7 laptop with current itunes working will not recognize my ipod touch as new hardware/device. I tested my usb port, rebooted computer with and without ipod - no luck. Ideas?

    Mested usb port-oky windows 7 laptop with current itunes working will not reognize my ipod as a new device/hardware.  I have tested usb port-ok; rebooted with and without ipod plugged - no luck. Ideas?

    Not uncommon. Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Unable to make Acrobat X the default handler/opener of PDF files on a Windows 8 laptop with Acrobat Reader also installed.

    I have a user with a Windows 8 Sony Vaio laptop with Microsoft Office 2013 Professional, Acrobat X Standard, and Acrobat Reader installed. Another program on his system requires Acrobat Reader so we cannot just remove that and keep it off the system. Regardless of what he does to set the default program to open PDF files with, when he opens a PDF file it always opens it in Acrobat Reader and not Acrobat itself. We have re-associated it and set the default program handling repeatedly and have also tried complete uninstall and reinstall of both Acrobat and Acrobat Reader which had no effect on this. At this point I am of the opinion that this is a bug and the file association is being overridden somewhere in the registry besides the file association entries. Any help is appreciated.

    The only supported way to set the default handler (besides the Wizard and cmd line properties) is via the UI at Edit > Preferences > General > Default PDF Handler. The installer has to be invoked and many registry entries get touched during the switching process.
    You should also verify your dot versions of the product support Windows 8: Overview — Acrobat and Adobe Reader Release Notes.
    Finally, while you Acrobat 10 should work with Reader 11, try reverting to Reader 10 (that should be your last resort).
    Ben

  • Installing OfficeJet Pro 8500 Wireless on Windows 7 laptop with no network

    Just purchased the OJPro 8500 Wireless and am trying to install on a new laptop with Windows 7 installed. First the CD that came with the printer didn't like Windows 7, so I downloaded the latest drivers from HP and things started happening... but no cigar.
    I'm trying to connect the printer to a laptop using wireless<-->printer, there is no wireless network involved. The equipment is as follows:
    - 3-IN-ONE HP OfficeJet Pro 8500 wireless
    - Laptop MSI CX600 series with wireless/bluetooth
    I would really appreciate any info on how to accomplish this.
    Thanks.

    1st, thx for clue about ad hoc (wireless) NETWORK (on pg. 10 & 11) in hp OFFICEJET "Wireless Getting Started Guide".
    Windows 7 HELP & HP Solution Center were both pretty useless.
    (Specifically)
    Type "ad hoc" in Search Programs & Files (under START icon).
    Results will be; "Set up an ad hoc (computer-to-computer) network". (Click on this)
    Results will be; Dialog box to give name to network & set security, then SAVE.
           NOTE: My Officejet Pro 8500n recognized "Security Type" = "No Authentication (Open)" & "Encryption Type" = "None"
    (Go to)
    Control Panel > Network and Internet > Network and Sharing Center > Connect to a network
    Results will be; (in Dialog box for "Open Network and Sharing Center") a listing of your ad hoc network name & message (in bold) "Waiting for users"
    Finally, on Officejet Pro touch screen, Select "Setup Menu", "Network", "Wireless Setup Wizard",  [Name] (given to ad hoc Network in Windows 7), & OK.
    (Opps, 1 more thing) Also, follow instructions on pg. 10, to "Change from a USB connection".

  • Labview 2009 install on windows 7 fails with error code 1935

    Hello all,
    I have problems installing LV9 on my windows7 machine.
    It always ends with:
    Any ideas would be welcome.
    Thanks
    Albert

    Since it is not simple to reinstall only .net framework on W7  (it is part of the operating system),
    I checked the .net framework with the .NET FRAMEWORK VERIFICATION TOOL
    ( http://blogs.msdn.com/astebner/pages/8999004.aspx.)
    Verification succeeded for .net 2.0,3.0 and 3.5.
    Since there are more problems on this pc. (1:windows update problems with strange errorcodes, 2:unable to turn windows features on/of)
    i decided to rerun the W7 setup.
    i selected the upgrade option , assuming this would update corrupted files, and it did.
    After that LV9 installed without problems.
    Albert

  • HT1329 Is there a possible way for me to sync all my iPod Touch (4G) 's content to a Windows 8 Laptop with iTunes? and be able to continue syncing weekly?

    So I've had this Windows laptop since 2009 and its very broken and slow but it has all my iPod's content on it (iTunes).
    Recently I bought a Windows 8 Laptop, and I'd really like to sync all the content from my iPod Touch 4 (mostly the songs) to my new laptop without having to delete anything important.
    (I also have a couple older iPods, but none of them have the same content as the one on the iPod Touch incase that helps)
    Thanks.

    MELODlE wrote:
    ... I'd really like to sync all the content from my iPod Touch 4 (mostly the songs) to my new laptop
    From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751
    An Added Bonus is that you will have a Backup of iTunes.
    If you do not have access to the iTunes Library on your Old computer... or its Backup...
    See these 2 Links...
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141

  • Previously backed up wife's Compaq Laptop along with my iMac and MacBook Pro to Time Capsule.  Replaced wife's Windows Vista Laptop with new Sony Windows 8 Laptop.  Now can't access Time Capsule to back-up.

    I also need advice on removing old Compaq back-up.  That laptop is dead.  Hard drive wiped and removed before recycling.  Help

    Windows 8 seems to still be waiting for bonjour..
    Open windows explorer and type in the TC address directly in the address bar.
    \\TCIPaddress or TCname
    Replace with the actual of course.
    If no go, ping the TC ip address .. still no go, then the networking on the windows machine is set wrongly.. never used win8 so no idea.. but turn off the firewall and ensure the laptop is in the home area, not work not public.
    You have to get ping response to open the TC.
    On the TC setup the guest access to on and full read and write access.

  • How do I reformat a windows 8 laptop with a 24gb SSD properly? (ideapad u310 touch)

    I wanted to reinstall windows on my laptop so that I have a clean install (no bloatware) but I didn't want to ruin anything because i'm not too familiar with how express cache works and the other features on my laptop,
    Also, windows 8 came preinstalled and I have no CD incase I wipe the hardrives. However, I backuped some drivers that I found in a folder on the SSD onto an external harddrive.
    Please help me clean install windows especially when it comes down to settings up partitions and how to properly configure the express cache features to work with the SSD properly for best performace. Thanks

    Also why is the ssd split up into these sizes? I thought the entire drive is supposed to be used for expresscache. Or am I wrong?
    Link to picture
    Moderator comment:Please don't post the same thread(s) in multiple places as it splinters the discussion. Duplicate(s) removed. Picture(s) totalling >50K converted to link(s) Forum Rules

  • Running LabVIEW 7.1 on Windows 2003 Server with Terminal Services

    We are setting up a newtork based solution with LabView. I have looked for documentation on installing LV 7.1 on a Windows 2003 server to run the applications and then have destkops connect to it. Can this be done with a Terminal Services Access solution? Another words, if we were to purchase the LV Volume License Manager, can you install LV 7.1 onto a Windows 2003 server and run the application through TS across a 1GB backbone from the desktop, which makes the server do all the processing?

    On Fri, 29 Oct 2004 07:42:13 -0500, ITIQ wrote:
    > By running a session through Terminal Services you are NOT running
    > anything on the desktop it all runs on the server. So if the software
    > was installed on the server and you had the correct number of licenses
    > that you allow to connect through Terminal Services, would this not be
    > allowed under the EULA?
    Sorry for the delay. I'm surprised Philip didn't get back to us... Phil
    are you there? Based on his comments, I think he misunderstands your
    situation (no offense Phil).
    You and I are both talking about the same thing. You basically want a
    terminal server license. NI will not provide it. They told me (over the
    phone) to get a multi-seat license (MSL). IMO, that's unacceptable. I
    expect a LV license taylored specifically for thin client networks. A
    multi-seat license is for -->installing<-- on multiple machines. It
    conforms to a totally different set of rules. One big one, an MSL assumes
    that you intend to run LV locally to interact with DAQ hardware. Since
    this won't be done with the thin client, you shouldn't have to pay for it.
    > I am not sure if the question is if the license is valid or not, I am
    > first just trying to figure out if you can even install LV on a Windows
    > 2003 server and run it through a Terminal Services Session.
    Since you are talking about a Microsoft operating system, I would say this
    cannot be done without some additional/costly junk installed.
    Here's another option. If the people you're supporting don't have any
    platform dependent things like ActiveX in their LV applications, you
    should consider using a Linux-based terminal server. I know for a fact it
    works.
    I've assisted in setting up a network like this before:
    * One Linux terminal server with LabVIEW for Linux (Full Dev)
    * One WinXP box on the network with LabVIEW for Win (Prof Dev)
    * 5 cheap thin clients
    They developed LabVIEW source code on the thin clients and then compiled
    packages on the WinXP box for distribution to their customers. The WinXP
    was only used for compiles so they just hopped on when necessary. The
    eventual plan is for the thin clients to simply open a RemoteDesktop
    (using RDP) terminal session and do the compiles from there. I'm not sure
    how to do that yet... on the Windows side.
    > I see the comments on calling VIs through LV. I am a Network Engineer
    > not a LV Developer, so unfortunately I do not know what a VI is. All I
    > am looking to do is run low end PCs with LV if I have to, but use the
    > server as the workhorse to process all sims etc.
    Phil must have thought you needed a LV application to access the front
    panel controls of another LV application running on a remote machine. The
    VI server is handy in that area but useless in your case.
    Hey, you wanna hear about cheap network infrastructure? We bought our
    thin client boxes for $15 each! Go to ltsp.org if you want more info on
    configuring Linux as a terminal server.
    You, and anyone else, can also email me at gnu_voodoo [at] netzero [dot]
    com for questions/comments.

  • I have a title on my site I did in MS Word Art. It displays fine in IE on an XP system, but the same system with firefox 3.6.17 it shows a rectangle box. The same on my windows 7 laptop with FF4.

    I have a website standing-tall.com. On the home page half way down below where it says "Please take time to watch this presentation." is a link that says All Hands on Deck. That link was done in Frontpage with Word Art. It displays fine with my XP system in IE, but not firefox. I don't know if it needs and add-on, plugin or what. Please help.
    Bob 805-552-7634

    The '''bgsound''' tag isn't compatible with much except for Internet Explorer. <br />
    http://kb.mozillazine.org/Background_music_does_not_play
    Also, FrontPage isn't the best tool for creating webpages, it tends to code for older versions of Internet Explorer instead of "standards compatibility" mode.
    http://kompozer.net/

  • Re: How do I reformat a windows 8 laptop with a 24gb SSD properly? (ideapad u310 touch)

    Lenovo staff good at moderating but not answering questions

    None of the moderators are Lenovo staff. We are all member volunteers charged with maintaining a constructive and cordial environment for all members.
    Additionally, from the Community Rules:
    "While members from Lenovo may participate at intervals to engage in the discussions and offer advice and suggestions, this forum is not designed as a dedicated and staffed support channel."
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • I can't open a forum index on my laptop with Firefox but it works in IE. What can I do to correct firefox?

    I can't open a forum index. I'm using a new windows 7 laptop with the lates firefox. Site works fine on home desktop and cell with firefox. Also on this laptop with IE.
    Here is the config settings.,
    "application": {
    "name": "Firefox",
    "version": "18.0",
    "userAgent": "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:18.0) Gecko/20100101 Firefox/18.0",
    "supportURL": "http://support.mozilla.org/1/firefox/18.0/WINNT/en-US/"
    "modifiedPreferences": {
    "browser.cache.disk.capacity": 358400,
    "browser.cache.disk.smart_size.first_run": false,
    "browser.cache.disk.smart_size.use_old_max": false,
    "browser.cache.disk.smart_size_cached_value": 358400,
    "browser.places.smartBookmarksVersion": 4,
    "browser.startup.homepage": "about:blank",
    "browser.startup.homepage_override.buildID": "20130104151925",
    "browser.startup.homepage_override.mstone": "18.0",
    "extensions.lastAppVersion": "18.0",
    "gfx.direct3d.prefer_10_1": true,
    "network.cookie.prefsMigrated": true,
    "places.history.expiration.transient_current_max_pages": 104858,
    "places.database.lastMaintenance": 1358019789,
    "privacy.donottrackheader.enabled": true,
    "privacy.sanitize.migrateFx3Prefs": true,
    "security.warn_viewing_mixed": false
    "graphics": {
    "numTotalWindows": 1,
    "numAcceleratedWindows": 1,
    "windowLayerManagerType": "Direct3D 10",
    "adapterDescription": "Intel(R) HD Graphics Family",
    "adapterVendorID": "0x8086",
    "adapterDeviceID": "0x0106",
    "adapterRAM": "Unknown",
    "adapterDrivers": "igdumd64 igd10umd64 igd10umd64 igdumdx32 igd10umd32 igd10umd32",
    "driverVersion": "8.15.10.2559",
    "driverDate": "10-21-2011",
    "adapterDescription2": "",
    "adapterVendorID2": "",
    "adapterDeviceID2": "",
    "adapterRAM2": "",
    "adapterDrivers2": "",
    "driverVersion2": "",
    "driverDate2": "",
    "isGPU2Active": false,
    "direct2DEnabled": true,
    "directWriteEnabled": true,
    "directWriteVersion": "6.1.7601.17789",
    "webglRenderer": "Google Inc. -- ANGLE (Intel(R) HD Graphics Family)",
    "info": {
    "AzureCanvasBackend": "direct2d",
    "AzureFallbackCanvasBackend": "cairo",
    "AzureContentBackend": "direct2d"
    "javaScript": {
    "incrementalGCEnabled": true
    "accessibility": {
    "isActive": false,
    "forceDisabled": 0
    "libraryVersions": {
    "NSPR": {
    "minVersion": "4.9.4",
    "version": "4.9.4"
    "NSS": {
    "minVersion": "3.14.1.0 Basic ECC",
    "version": "3.14.1.0 Basic ECC"
    "NSSUTIL": {
    "minVersion": "3.14.1.0",
    "version": "3.14.1.0"
    "NSSSSL": {
    "minVersion": "3.14.1.0 Basic ECC",
    "version": "3.14.1.0 Basic ECC"
    "NSSSMIME": {
    "minVersion": "3.14.1.0 Basic ECC",
    "version": "3.14.1.0 Basic ECC"
    "extensions": [
    "name": "Bing Bar",
    "version": "5.0",
    "isActive": false,
    "id": "[email protected]"
    "name": "Search Helper Extension",'
    "version": "1.0",
    "isActive": false,
    "id": "{27182e60-b5f3-411c-b545-b44205977502}"
    Here is the part of the site I can get to. I can log into the site, but can't get to the forum. You do not need to login to get to the forum page.
    http://forum.guzzitech.com/forum.html
    and the screen says it may be from not allowing cookies, but I am.

    hello jlzibell, please go through the troubleshooting steps described at [[Websites say cookies are blocked - Unblock them]].

  • Email account on Windows 8 Laptop to iPhone & iPad help needed

    Hello all,
    I have a Windows 8 laptop with an Eastlink (pop) email account using Outlook 2010 as my email software.  I have an iPhone 4s and an iPad mini.  In the past on a older laptop with Outlook 2003, and prior to ios7, when I checked my email on my phone, I could see the messages and delete, read etc.  Then when I checked my email later on using my laptop, the messages on my phone would disappear and move to my laptop email. This is no longer the case.  I have configured my Eastlink mail on the iPad and iPhone as imap and when I check my email, I can see the Eastlink email messages but they stay there and do not ever show up in my Outlook 2010 account on my laptop. I need to figure out the settings to change to get this working the way it used to.  Can anyone help?  Thanks in advance.
    Leslie Harnish
    Windows 8 laptop, iPhone 4s, iPad Mini user

    I think I'm understanding but correct me if I'm not getting it.  My laptop is a POP account so when I check mail, it is removed from the Eastlink mail server and the messages end up in my Outlook 2010 software on the laptop - this setting has been in place long before I got an iPhone.  It is my "master account" for lack of a better word.
    Then, when I got my iPhone, I was able to check my email through the settings for IMAP.  If I'm understanding correctly, what I see on my phone is a copy of what is still sitting on the Eastlink server and the original stays on the Eastlink server until I physically download it to the POP account.  I don't want all of my mail on the Eastlink server all the time, I'd like to clear it off of there and have it on my laptop.  I have a large archive of messages in my Outlook software, some going back to 2008 which I need to keep as they pertain to things I can't delete.  Am I missing something by thinking that if I had my laptop email set as IMAP all along, even when using the laptop, I would have been leaving all those messages on the Eastlink server and that would have had me over my quota pretty quickly? 
    When I first got the phone, my laptop settings were never changed to IMAP yet when I checked the mail on my phone, I could see the messages, then when I got home to my laptop and downloaded my email, they magically disappeared from my phone automatically because they were no longer on the Eastlink server but were now on the laptop.  This stopped after one of the upgrades that eventually ended up being IOS7.  I swear it used to work that way.  I've gone to wiki and read about IMAP and POP but I must be missing some basic understanding.
    Thanks in advance and thanks for your patience with me as I try to figure this out. 

  • I have photoshop elements 13 and would like to run portrait pro 12  standard hw do i do this on a windows 8 laptop

    hello i have phtoshop elements 13 and would like to add portrait pro 12 as a plugin i am running a windows 8 laptop with correct spec please help asap

    I don't believe the standard edition includes a photoshop or photoshop elements plugin
    http://www.portraitprofessional.com/editions/

  • Why was I required to load the 32 bit version of LR4.3 on my wife's Windows 8 Laptop?

    I was setting up my wife's new windows 8 laptop with LR 4.3 and during the installation, I was informed that only the 32 bit version could be installed. It appears as though it performs much slower than windows 7 computers. Other programs installed seem to run at the same speed or faster. Is it due to windows 8 and will windows 8 Pro allow the installation of the 64 bit version??

    You installed the 32bit version of Win 8 - or at least LR4 thinks so. Verify that. If yes, then everything is as it should be. If not, something went wrong, but we'd need a lot more info...
    Mylenium

Maybe you are looking for