LabVIEW 7.0 Crashes when inserting "Instrument I/O Assistant" Express VI

Hi,
I'm unable to work with Instrument IO Assistant when ever i try to place the IIOA express vi on the blockdiagram a message pops up saying "MAX or IIOA is not installed correctly please install from NI driver CD". Also i've not installed NI-DAQ/mx on my PC.
I tried to install from IIOA.msi but the problem remained & also tried install/uninstalling MAX & IIOA many times but didn't work.At present i don't have Driver CD as well.
Plz help me out.
Thanks
sayaf

Sayaf,
Do you just get this message about IIOA not being installed correctly? Or does LabVIEW actually crash as the title of your post suggests? At what point does LabVIEW crash?
As far as the message goes, there are a couple of things to check:
1) Look under \vi.lib\ - is there a directory there titled "InstrIOAsst" with IIOA.LLB inside the directory? If this file is not there, then this is the source of the message you are receiving - I can help you get this straightened out if this is the problem.
2) If that file is present, then check your \Shared\ - is there a "LabVIEW Broker" directory there? If so, confirm there are two files present in that directory: LVBroker.dll and LVBrokerAux70.dll. If these files are not present then this could cause that message to show up as well.
-Tommy

Similar Messages

  • LabView 8.5 crashes when opening this VI

    I had LabView crashing the first time as I was saving this (sub) VI. Since, LabView will always crash when I try to open it. The funny part is that the code itself is still executed correctly when called by another VI. Just editing is not possible anymore ...
    Any help to recover this file or to stop LabView from crashing is highly appreciated.
    Thanx all,
    Robert
    Attachments:
    SubVi_scan_CSV.vi ‏109 KB

    Thank you for your replies!
    It could be missing this VI - I wonder how you can tell? I cannot even open it, LabView will crash before. Unfortunately I dont have a copy of this VI, its about 2-3 days brains in it ...
    I am not so sure how do use the VI server. I am not soo experienced yet, but I will look into it.
    I tried adding the VI as a subvi to a new VI, but LabView will still crash. There is not error message at all, it just goes bye bye, completely ...
    Message Edited by hempi23 on 02-05-2008 08:59 AM
    Attachments:
    SubVi_csv2array.vi ‏18 KB

  • Indesign CS5 crashing when inserting blank pages

    I wonder if anyone else is having this following problem with Indesign CS5?
    The program frequently crashes when inserting blank pages, especially several. I've noticed that this problem has something to do with amount of colums in the masterpage.
    Recently I had this problem when layouting a book with 9 colums per page. After converting them to guides the problem dissapeared. When using multiple column masterpages it's usually ok to insert 2 new pages a time. More than this the program crashes.
    Do I have to install the program again?

    Have you patched to 7.0.4?

  • Microsoft Word 2013 keeps crashing when inserting comments from the review ribbon

    Does anybody know if there is a fix for Microsoft Word 2013 that keeps on crashing when inserting a comment (Insert a Comment) from the review ribbon?

    Hi,
    Try to start Word 2013 in safe mode to check whether the issue is caused by some add-ins.
    Jaynet Zhang
    TechNet Community Support

  • Instrument i/o assistant express

    hi, i hav all ready installed the driver cds along the the labview7.1 software but i m not able to use the instrument i/o assistant express in my application then plz guide me how can get it.

    Could you give us a little more information? Can't use, how?
    Do you have the Instrument I/O Assistant Express VI?
    Can you drop it?
    Can you configure it?
    Does it then fail to operate ase configured?
    Where in the chain of use does it fail?
    Thanks,
    Bob Young
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • INSTRUMENT I/O ASSISTANT EXPRESS VI - PERFECT PARSING NO OUTPUT

    I am using the Instrument I/O assistant express VI to parse data from a (visa) serial port. Neatest thing since sliced bread! I initially send a write command followed by eight read/parse commands to retrieve eight tokens each ending with cr/lf. All seems well during i/o setup. The Vi compiles and shows all eight string tokens. I then connect each one to a string indicator. When the Vi is run no data appears in the indicators. Repeated runs during the I/O setup shows tokens extracted perfectly. What's going on? 

    Hello oledaqman,
    I tried to replicate the problem you are seeing, but everything seems
    to work fine on my system.  One option I would propose would be to
    use NI-SPY to determine if the reads are actually being performed when
    you run the VI.  NI-SPY should allow you to determine if the VISA
    commands inside the Express VI are being executed, as well as
    determining whether they are receiving any data.
    This will help us to determine whether the problem lies in the actual
    transmission of the data, or the parsing of the data after it is
    received.
    Let us know what you find, or if you have any questions, and we will be happy to help.
    Jason S.
    Applications Engineer
    National Instruments

  • Can I use the instrument I/O assistant express vi to communicate with a USB connected instrument ?

    Can I use the instrument I/O assistant express vi to communicate with a USB connected instrument ? My PC is running Windows 2000 et Labview7 express.
    where can I get information or examples on the assistant and USB communication ?

    Yes you can - the Instrument I/O Assistant communicates with message-based instruments through VISA. VISA 3.0 supports USB instruments and VISA 3.0 is the version of VISA that installs with the Assistant.

  • Dreamweaver CS 6 crashes when inserting images

    Dreamweaver CS 6 crashes when I try to insert images into a webpage. This makes the app pretty much useless.
    It crashes when the alt attributes window pops up.
    How do I  stop this from happening? I'd like to actually be able to use this VERY EXPENSIVE software.
    version 12.0 Build 5842, OS X 10.7.4,  2.8GHz Intel Core 2 Duo, 8GB RAM

    n8-zilla wrote:
    version 12.0 Build 5842, OS X 10.7.4,  2.8GHz Intel Core 2 Duo, 8GB RAM
    I'm not sure what the correct build number is for Dreamweaver 12.0.2, but it looks as though you have 12.0.1. Try getting the 12.0.2 updater from http://www.adobe.com/support/dreamweaver/downloads_updaters.html.

  • InDesign crashes when inserting new page(s)

    I have a landscape document with facing pages. The origin was an Indd CS3 document opend with CS 5 and saved. I can move pages from one location to another but the attemt to insert one or two new pages will cause indd to crash. This is not a general problem this seems only to happen with this particular doc.
    indd CS5 (7.0.2) , win xp, sp 3

    Ther have been reoprts of an apparent bug that causes crashes when insering pages based on masters with more than one column. If that's not your problem, try Remove minor corruption by exporting

  • Why does LabView 7.1 crash when using "Get Channel Info" vi ?

    Hello,
    I have written a program to get channel information for all my virtual channels. It worked fine in Labview 6i but when we upgraded to 7.1, it crashes with "Labview has generated errors and will be closed by WIndows". We have a SCXI-1001 with 6 SCXI 1102 modules, 2 SCXI 1102B modules, 1 SCXI-1102C module, and one SCXI-1140 module. Debugging reveals that the program crashes when the 1102C module channels are reached. I have attached the code I am currently using. Any help is appreciated. Thanks, Neil
    Attachments:
    maxinfo.zip ‏133 KB

    Hello,
    I have two questions for you please:
    1. You mentioned early that debugging revealed that the problem was being originated on the SCXI-1102C module. Can you please try taking this module out and test your program again? Also try testing only one module and see if it works, then keep on adding more and see what happens.
    2. I run your program on LabVIEW 7.1 and it didn't give me any problems. In general, anything on LabVIEW 6.1 cab be recognized by LabVIEW 7.1, so maybe the order of installation you did is not correct. Did you first take the board out, uninstall the previous version of NI-DAQ you had, install LabVIEW 7.1, then NI-DAQ 7.3 and then plugged the board in?
    Please let me know about this.
    Thanks,
    LA

  • Captivate 7 crashes when inserting an animated gif

    Hi guys,
    new day different problems. I upgraded to Captivate 7 and want to insert some animated gifs. Some of them import fine, but I have two that cause Captivate 7 to crash on insert. I created them with Adobe flash and exported them with the following settings:
    I'm not sure what the problem is, since the settings were the same for all animations. The size didn't play a role either. I have to insert these animations as animated gifs, because we will publish the project in HTML5 for web and devices.
    Thanks for all your help!
    Nat

    Guys,
    I'm sorry, I'm just seeing your messages now. Just fyi, Adobe support never did get back to me about those gifs. What I ended up doing was changing all those settings until something worked (I did this for hours!). And the weirdest thing, there wasn't one setting that worked for all of them. The following are just two different settings I used for pretty much the same animation. There was no big difference in creating them, except for the publishing process, and only for HTML5 formats.
    And this is for the other animation, totally similar in style:
    I tried forever to change setting, publish, insert into Captivate 7. From there it was a trial and error experience.

  • Iweb crashes when inserting Divx html snippet

    Hi there,
    I am new to iweb but it seems very cool. i have been using the widget feature to paste youtube and bliptv links and works great. But when i try doing the same thing with stage6 links iweb crashes when i click "apply". I prefer stage6's divx format...has anyone been able to make this work? if so how?
    Cheers

    thanks for this. You are brilliant for replying, however its still not working even after an uninstall(?)
    It works OK on my sons Imac and for the sake of arguments I have created a brand new site and tried to upload with a brand new domain file and it still crashes with the above.
    Guess I will either need to speak to Apple Care, connect my Macbook Pro to my sons mac and run in target disc mode to hopefully run disc warrior or if all else fails rebuild the laptop. Such is life.....

  • Acrobat Pro 9.5.4 crashes when inserting pages into exisitng PDF

    When I try to insert pages into an exisitng PDF document Acrobat Pro 9.5.4 running on Mac OS 10.8.2 hangs and crashes every time. Please HELP!!!

    Any PDF I try and insert to any PDF. It does not seem to be isolated to one document.

  • Problem with CS5 crashing when inserting or deleting page

    I have a legacy file (educational textbook) that was created in CS2 and has been edited and updated over the past couple of years with no problems. The file is approximately 360 pages with around 30 illustrations, a ToC, and large index. When updating the material today, I went back to insert a page due to overflow text and InDesign crashed. This happens every time I try to insert or delete a single page. I can insert a single page on pages i through viii, but when I try to insert a page beginning at Sec2:1 InDesign crashes. I can open and close the file and edit it anywhere with no problems.
    If I insert 2 pages at a time, it works fine and I can flow the text into the page. But, when I go to delete the extra page I don't need, it crashes. It doesn't seem to be specific to any particular master page in the file. I tried several times to export to an IDML file, reopen and save it to an InDesign file but the same problem occurs.
    The same thing happens with the file on the same verson of InDesign that is on my laptop. This problem does not occur with other InDesign files that I have created in the past. I need some help. Thank you!

    I think Steve was looking for a bug that affects new Macs, which we can rul out at this point.
    I suspect some corrupt text of some sort, but that's just a guess. Ther first thing I'd do is make a copy of the file for backup, then start trying to find the problem.
    You mentioned this was a CS2 file originally. What was the last version, and how much editing has beeen done in CS5? Do you have the old file and can you add pages in that version?
    In the CS5 version, are you able to select half of the pages at a time in the Pages panel and use the Move Pages command to move them to a new file (you need to make the new file first)? In the new file, before you move the pages, rename Master Page A to something that you didn't use in the file that is giving you trouble so that it isn't applied to any of your pages when they are moved, and open the Paragraph Styles panel flyout menuand choose Load Styles. Load the [Basic Paragraph] style from the problem doc and replace the existing one, then you are ready to move the pages.
    If you are able to move the pages, move half the pages into one file, and the other half into a second file. Save both files with new names. This is a divide and conquer search technique to see if we can isolate a problem page. With each half document, see if you are able to add or delete a page. Hopefully the answer will be yes for at least one half. If it's yes for both, move the pages from one of the new docs into the other to recombine them (you may have broken a text thread when moving the pages, so check for that at the point where the two were originally separated), save As with a new name and you should be good to go.
    If only one half is working, repeat the exercise with the bad half, moving halves to two more new files. Continue to do this until you are down to a single page from the old file, then remove half the text (or illustrations) and try the test again. You should be able to isolate a problem very quickly this way -- about 8 steps to get a 360 page book to down to one page.
    If NEITHER half doc works, it might be a corrupt style (and that may be the problem even if one of the half-docs is OK if that style is rarely used and doesn't get imported). When you move pages to a new doc, the styles will travel with them unless there are same-named styles already there. If you suspect a bad style, you should make a new blank doc, then define, not load, duplicate styles for all of the styles in the problem file, before moving the pages. This may be a lot of work, so an easier alternative might be to place your cursor in each story, then export that story to InDesign Tagged Text (If you ask over iin scripting, someone may have a script to export all the stories at once). You can then place the tagged text into a brand new file and see if that works.
    Keep us posted.

  • Dreamweaver CS6 Crashes when Inserting... anything

    I've been encountering this problem frequently. When I use the Insert menu, whether from the menu bar or from the quick tab panel, (usually) Dreamweaver crashes. It happens with flash videos, form elements, you name it. There's no error message, just a windows alert stating that Dreamweaver CS6 has encountered a problem and needs to shut down. Checks for solution, and fails.
    So, has anybody else encountered this? I don't even know where to start, since there's no alert getting thrown by DW, and it doesn't stop responding either. It just goes from working to dead.
    Thanks

    Thanks for the replies. No, I'm not running any extensions. Everything is right "out of the box". Meaning, how I downloaded it from Adobe. I checked the extension manager anyway, not much to see there...
    As for deleting te personal cache, the walkthrough for locating and removing that file is inconsistent with my system. As stated, I'm running Win7, but there is no winFileCach.******.dat file on my C: drive. I've turned on hidden file visibility, and searched three times while writing this reply, just to make sure I'm not overlooking something simple. But I'm not finding anything.
    The one configuration folder I did delete, as I suspected, broke Dreamweaver entirely, but that was an easy fix. I knew what was wrong, lol.

Maybe you are looking for