Labview 7.1 won't run under Windows 7
Hello -
I recently upgraded my system to Windows 7 (Ultimate, x64). Unfortunately, when I now attempt to run Labview 7.1 on this machine I get an error saying the following:
The requested feature is unavailable on "localhost".
I am not sure of where to go from here. The built in compatibility mode (running it as if it were XP SP3, for example) produces the same result. Searching on this forum I found someone with the same message after installation errors (dealing with registry privileges) but I saw no such errors during what was an uneventful, clean install. One thing I am wondering about (although it does not seem to be an issue with any other program that I have) is I happened to notice that Windows 7 seemingly makes all subdirectories under "Program Files" (Program Files (x86) in this case) read-only. I turned this off for the National Instruments subdirectory and all of its subdirectories, with no change. I also attempted the "fix" for registry privileges (in the aforementioned post on here) with no luck.
Has anyone else seen this? It'd be nice if it gave me a more detailed message but this seems to be all of the information available with this error.
Thanks,
Brett
Hmm, you've just about stumped me. If this is on a laptop, please try disabling the WIFI card so only one network adapter is present (there are activation issues in later versions related to this). Are you using the default LabVIEW.INI file or are you migrating your settings from a previous install?
Also, do you have any drivers installed? If so, from what Driver CD are you installing them from (month/year)?
The system I tested LV 7.1 on is a virtual machine with Windows 7 Professional x64. I'm not sure I know many more "tricks" to try in order to get this to work, but I am not sure this is even an issue related to Windows 7. The other thread documents this issue on a Windows 2000 system. Once engaged by one of the NI Applications Engineers, you might try installing LabVIEW 7.1 from another copy of the distribution/installer.
-Bob
Message Edited by B O B on 11-10-2009 04:44 PM
Message Edited by B O B on 11-10-2009 04:45 PM
-Bob
Similar Messages
-
Application Runs Under Windows 8.1 But Not Under Windows XP (I Know XP Is Deprecated)
The problem is with the obtuse error message put out by Windows's program loader. It reads, in part, "..is not a valid Win32 application." The application runs everywhere except on Windows XP. Looking for root cause of the problem. It's a very
simple application. Only a few lines of code.
C:\Packaged-Software\32-BIT\Reboot.exe is not a valid Win32 application.
Proposed nature of the problem:
1. The file was downloaded from a website but the download was incomplete.
2. The full file system filename path contains bad characters such blank space.
3. Visual Studio constructed an application that won't run anywhere much less on XP.
4. The supporting libraries are not properly installed (e.g. .NET Framework4, and VCREDIST).
Retorts:
1. The file wasn't downloaded from a website and is intact.
2. The filename path doesn't contain any spaces.
3. The application runs under Windows 8.1. Also on Windows 7.
4. The supporting libraries are properly installed.
So, what's the problem? One surely will not discover the root cause from "not a valid application."
Body must be 4 to 60000 characters long. I had put the code here. It isn't 60000 character long. But it validated as if there are more than 60000 characters. Sorry for the incomplete submission due to website construction error.
MARK D ROCKMANHi F7H2fw,
How did you develop the application ?
Here is a similar symptom and this may explain the issue somehow:
Setup.exe is not a valid Win32 application
http://blogs.msdn.com/b/vsnetsetup/archive/2012/10/16/setup-exe-is-not-a-valid-win32-application.aspx
I suspect there is a compatibility issue here .
Considering this is more likely a developing issue .It is recommended to ask for help from our MSDN Forum .They are more familiar with the developing issue .If it is possible ,please attach the code in that thread .Thanks for your understanding and cooperation.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
HP OfficeJet J6410 won't install under Windows 8
Hello to you all,
Two days ago, I bought a new notebook for my daughter. She needs it for her study. It's the HP Pavilion TouchSmart 11-e000ed.
Again, just like the situation I wrote about before in this topic over here (link: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind... the OfficeJet Printer J6410 won't install under Windows 8.
Now this is what I've done before the problem occured:
- I made a username and password for her,
- I activated Windows 8,
- I made a recovery-point,
- I took my external DVD writer, installed Office 2007 Home and Student for her (o.k, I know it's old, but it's very o.k - and legal copy -. for her study, used it myself as well and still do, and never any complaints about that one), and activated it,
After that and restarting the notebook;
- the notebeek activated USB 2.0 (it does that automatically at first use),
- installed XPS2OneNote (to use for Office OneNote 2007),
- installed SaveAsPDF&XPS,
- removed Norton Internet Security (I never use it, I use something else for that purpose, but was - and still am - planning to install that on a later moment),
- I made sure the notebook can access the server we have here at home, and made a share for her.
After that I used the OJ_AIO_J6400_Full_Win_WW_140_408.exe file (Dutch, but I'll translate the text in English).
From this point on I will describe as precisely as possible what happened
- - the program extracts some files, no problems there,
- - when the first screen appears, I pressed 'Install',
- - a bar appears, and after that another pop-up that says tha you must allow all HP processes. I pressed 'Next',
- - system is controlled, and after that one must agree with the licence agreements. I checked the box, and pressed 'Next',
- - the system is prepared for installation and - yes! - there it comes... an error message.
The error message says:
C:\users\<username of my daughter.\AppData\Local\Temp\7zS0FF0\Setup\de..
Please not that this is a different message than the one I got before, as I described in my posting before, (link again: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind...
Nonehteless, I assumed that, as before, the problem was with the C+++, just like before. That is why I made the following steps:
- I used the OJ_AIO_J6400_140_408_Scrubber program, run L4 4 times.
- I looked for the KB2565063 update, but it isn't there anymore. So, instead, I ran all updates there are until the system said that there are no updates to be found,
- After that I took the old installation disk that came with the OfficeJet J6410 printer, and (tried to) ran hpsetup.exe. It doesn't do a thing! Literally!!
- after that I tried to run the the OJ_AIO_J6400_Full_Win_WW_140_408.exe file again. No success. I got the same error as before (see above, the ..\7zS0FF0\Setup\de.. thing again.
So, what to do now?
Anyone got some helpfull tips for me? I would really appreciate your feedback / help.
Thank you in advance,Hi again,
No, it didn't work. And, the solution you offered neither.
This is what I've done.
After downloading the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file, I tried to install it.
It failed. I got an error message similar to the one before.
'C:\users\<username of my daughter.\AppData\Local\Temp\7zS57DB\Setup\de.'
I tried to ran the scrubber again, and the CCCUninstaller and tried again.
Same error message occured.
After that I tried to look for the KB2565063 file again. Found it this time and ran the vcredist_x64 file.
I rebooted the system, tried to run the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file again.
Same error message ocuured.
So, after that, I followed the steps you proposed.
Step 2 - searching for hpoins*.dat --> no results found.
Step 3 - searching for hpwins*.dat --> no results found.
Step 4 - I ran the Run Dialog box and typed MSIEXEC /REGSERVER (with AND without the extra space between ('MSIEXEC /REGSERVER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /REGSERVER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /REGSERVER. Check if you typed the name correctly and try again'.
Step 5 - I ran the Run Dialog box and typed MSIEXEC /UNREGISTER (with AND without the extra space between ('MSIEXEC /UNREGISTER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /UNREGISTER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /UNREGISTER. Check if you typed the name correctly and try again'.
So... conclusion: NOTHING worked.
My ideas for a possible solution didn't work, and neither did your ideas for a possible solution.
Reason why I want it to work is because of the HP Solution Center. If I can not install it with the software from the original installation disk, or the software that one can download from the HP site (the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file that is), than I have no HP Solution Center. That would be a pity, for I am sure my daughter would really love the use and ease of the program, and would really use it a lot for her study.
What's next? What else can I try to solve the problem?
Got any more idea's or helpful hints?
Thanks in advance, -
Hello
I'm currently developping an image processing algorithm using Labview 7.1 and the associated IMAQ Vision tools. After several tests, I found a weird result. Indeed, I put the labview algorithm - including the IMAQ VI on the library to get sure that I use all the time the same VI - on my memory stick and used it on two different computers. I tested the same picture (still in my memory stick) and had two very different results.
After several hours trying to understand why, I found that there were a difference between the results given by both computers at the very begining of the algorithm. Indeed, I used a JPEG file.
To open it, I first create an Image with IMAQ Create (U8). Then, I open it.
Then in my first sub-VI, I use IMAQ Cast Image to be sure that the picture is a U8 grayscale picture.
Right after that, I use the IMAQ Linear Averages. The results of this VI are different on the two computers.
I tried several time on the same picture : one computer always give me the same result but the two computers give me a different result. So there is no random variable on the results.
So my question is : Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?
My bet is on IMAQ Cast Image but I'm not quite sure and I do not undestand why. The labview and IMAQ are the same on both computers.
The difference between the two computer are above :
Computer 1 :
Pentium(R) 4 CPU 3.20GHz with a RAM of 1Go. The processor is an Intel(R).
The OS is windows XP Pro 2002
Computer 2 :
Pentium(R) 4 CPU 2.80GHz with a RAM of 512Mo. The processor is an Intel(R).
The OS is windows XP Pro 2002.
If anybody can help me on this problem, it would be really helpful.
Regards
Florence P.Hi,
Indeed it's a strange behaviour, could you send me your VI and your JPEG file, (or another file that reproduces) so that I could check this inthere ?
I'll then try to find out what's happening.
Regards
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception -
JavaSoundRenderer now running under Windows
Hello,
I found out that the JavaSoundRenderer could run under Windows but only if you use Java 6.0 Beta.
So if you've problems of playing audio in Windows then just install the new Java (6.0) and it will work.
best regards,
thomasHi,
Refer [SAP Note:1337708 - Crystal Reports support of 64 bit Operating Systems|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333333337333733303338%7D.do] and also have a look at
[SAP Note:122050-An error has occurred while attempting to load crystal reports on 64bit|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233323330333533303331%7D.do] might be helpful -
Photoshop CC2014 running under window 8.1. How do I access mini bridge. It does not show under FILE or WINDOW-EXTENSIONS. Works ok with CS6
Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG
-
I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?
If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my PC runs under Windows 8.1. and Iphone runs under IOS 7.1. Someone can help me, please?
It seems I have solved my own problem . . . well hopefully !! ;-)
I was using a 'non' Apple cable. When I swithced to using the stock cable that came with my iPhone, iTunes can now see that I have a 'Device' and identifies it correctly as my iPhone.
Hopefully this may help others . . . ?
Cheers,
Grant. -
Is there any way at all to install Windows 7 32 bit onto a MacBook Pro 13 in Retina Late 2013? The windows software I need won't run on Windows 7 64 bit.
Not using Boot Camp, but you should be able to using virtualization software such as Parallels to run Windows concurrently with OS X.
-
Is Adobe PageMill 3.0 still available? I use it to run three websites but it does not run on my new desktop which has a 64-bit operating system. However it would run on my laptop which runs under Windows Vista. But the original installation was from floppy discs and I do not have a floppy disc drive.
I am sorry Lcosahedron I am not aware of a download location for Adobe PageMill 3.0. It appears it was discontinued in 1999. You can find more details at Adobe PageMill - Wikipedia, the free encyclopedia.
-
Can't install mcafee in vmfusion running under windows xp; error is not understandable; any ideas?
Can't install mcafee in vmfusion running under windows xp; error is not understandable; any ideas?
Please repost in a VMWare Fusion forum, you can find it at:
http://communities.vmware.com/community/vmtn/desktop/fusion. -
Hi, I have adobe acrobat 6.0 but it won't run on windows 7, is there an update availabe?
Hi, I have adobe acrobat 6.0 but it won't run on windows 7, is there an update availabe?
I agree with Doc, but there may be a work around. Actually, your best solution is to just buy AA XI. The work around depends on what you mean by does not work. Do Acrobat and Distiller both install and appear to function? Is the problem one of not being able to print? If both of these answers are yes, then you can install an independent PS printer (maybe one from Adobe or one of the HP color PS printers), change the name to Adobe PDF for your use (not required), and change the port to FILE. Then to create a PDF you would print to that printer and open the file created in Distiller to create a PDF file. May or may not work. However, AA6 is so old, it is likely to cause other problems, even if this process works. If nothing else, it will not open some of the newer PDFs that are being created today (at least I would guess that will be the case). So buying XI is really in order.
Other issues that may crop up will be activation (will likely fail) and updates that have to be obtained from the FTP site and not the web. -
Why does a specific site open with Firefox 3.6 running under Windows 7 Ulimate but not under Windows 7 professional?
== URL of affected sites ==
http://www.bmw.co.ukWhy does a specific site open with Firefox 3.6 running under Windows 7 Ulimate but not under Windows 7 professional?
== URL of affected sites ==
http://www.bmw.co.uk -
HP Utility won't run in Windows 7
The HP Utility application for an HP Designjet Z3200 won't run in Windows 7. I browse to the application and nothing happens when I try to open it. I've rebotted several times as well as uninstalled and reinstalled the latest version of the app downloaded from HP.
Anyone have any clues as to why this is happening?
TonyThis forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Flash Player won't run. Windows 7, IE9, Firefox 16.01
Flash Player won't run. Windows 7, IE9, Firefox 16.01. I use the flash player uninstaller, make sure there are no flash player sub-folders reinstall current version, says installed .. no "video" no box, no info. redone several times both in Firefox and IE
Did you install both the ActiveX (for Internet Explorer) and plugin (for Firefox)? And both browsers show the same problem?
On Internet Explorer
is Shockwave Flash object enabled (http://forums.adobe.com/thread/885448)?
is ActiveX Filtering disabled (http://forums.adobe.com/thread/867968)?
Maybe you are looking for
-
Recover photos from iPad 2 that's stuck in recovery mode (no backup)
My iPad 2 is stuck in recovery mode (genius bar can't get it out). This happened while I was on vacation and unfortunately some of the videos and photos are not backed up/synced. Before I "restore" through itunes (and erase everything), is there any
-
Problem Connecting Patch Manager to Update Server
Hi: I'm having this error: # smpatch analyze Cannot connect to retrieve patchdb: Connection refused Im newbie on Solaris. Thanks, Irvin Irizarry
-
HT1766 will I lose my unlock if I update my iPhone 4S iOS 6.1.3 to iOS 7.0 beta?
will I lose my unlock if I update my iPhone 4S iOS 6.1.3 to iOS 7.0 beta?
-
MP3s not visible in Artist/Album
I added an album from run-d.m.c. to my phone via the file manager. Did a refresh and it said added 19 new songs. I can see/play them in my genre list and in my content search and in file manager. However When I go to the usual Artist/Album view it do
-
Okay - here's something new - and annoying: I am trying to relink a whole bunch of files (due to a NAS crash). The problem is - somewhere down the line, FCP has changed clips with longer names to abbreviated versions of their names. It cuts off the c