LabVIEW 7 and NI Switch and DMM function, Won't compile
After installing labview 7, I get broken arrow for PXI Ni Swich. Error occurs in NiSwitch Initialize.vi when initialzing Switch. The error message indicates: "Call Library Function Node: Function not found in library"
Thanks for you input. I did installation in the sequence you mentioned but it didn't help. With a help of apps at NI and being on the phone for soooo long, he found out that two dll files called ivi_Switch.dll and ivi_switch_32.dll were listed in VXIPNP\WINNT\bin folder as well as C:\programfiles\ivi\bin. By removing those dll from VXIPNP folder fixed the problem.
Bottom line is - leave the dll fils in C:\programfiles\ivi\bin as it is!
Similar Messages
-
I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?
Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Using Acrobat 9 Standard on desktop running Win 7 32Bit - and an HP1536dnf MFP - Scanner function
Using Acrobat 9 Standard on desktop running Win 7 32Bit - and an HP1536dnf MFP - Scanner function won't run - message states that driver missing - have tried to re-load original software many times from CD and download from HP website - that times out. Have tried many times to load in just driver - won't load-in. Have tried the unplug from power source and turning off firewall. Nothing works. Paid a lot of money for Acrobat and very helpful tool when I was running WinXP, but out of business since loading Win7 . . . . . . . Please help?
PSS love adobe wrote:
Have tried many times to load in just driver - won't load-in.
That sounds you are having a problem with the scanner driver, not Acrobat. Are you installing the Windows 7 drivers with the correct bitness? -
Help me to choose Right Core switches and Edge switches as per my Spec
Dear All
Please help me to choose Core and Edge switches and all required hard ware and software.
the spec details as per below
Core Switches
1. High performance, highly scalable core switch to provide multi-10GE connectivity to various segments in the network.
2. Switch should have redundant switch fabric and routing engines or management / supervisor modules
3.should have separate control and forwarding planes
4.Each switch should have redundant power supplies in N+N or N+1 fashion
5. Must allow for two spare slots once services, management, processing modules and line cards populated
6. Easy to manage firmware- i.e. single code type enterprise/service provider) or train, and robust operating system
7. Supports for the VRRP, NSR, GRES, BFD, STP, MSTP, RSTP, VSTP, LACP redundancy protocols
8. Hot plugging and removal
9. The switch should have native switching architecture with up to sufficient performance such that the loss of one switching fabric should not lead to degraded performance
10. Switch should support switching at least 400Mpps
11. Switch should be able to support 40 10Gig line rate ports in a fully redundant configuration
12. Chassis that can scale to 700 Gbps
13. The proposed Backbone switch should support, but not be limited to the following Layer 3 features:
Static ip routing
Routing information protocol (RIP) and RIP2
Open shortest path first (OSPF)
IGMP v1, v2 and v3
IGMP Snooping
IP multicast routing protocol
14. The switch should support the following features at a minimum:
Spanning Tree 802.1D, 802.1S, 802.1W
GVRP
802.1x single and multi-supplicant: VLAN and ACL assignment
Dynamic ARP Inspection (DAI), DHCP snooping, IP Source gurard
LLDP, LLDP-MED
802.3X, 802.3ad
Redundant Trunk Group (RTG)
IGMP snooping
Unicast static, OSPF v1/v2, RIP v1/v2
Multicast IGMPv1/v2, PIM
Graceful Route Engine SwitchoverI have gone through your document and I am surprised to see MORE information in the document than what you've posted. I am so mildly suspicious about the authenticity of the document and spreadsheet you've attached.
So far, based on this document, the client wants a chassis that can support up to 700 Gbps backplane. The only candidate, other than a full-blown Nexus solution, is the 6807-X.
Next, the document also states dual supervisor card with two spare slots. Good luck trying to get that much empty space on a 6807-X. This means 6509E. You can't use a 6513E because of line-card-to-slot limitation.
If you look under the heading "Edge Switching", the first sentence already makes references to 6800ia switch.
There's also a reference stating that the product should have a 100 Gbps backplane. You can take the 6509E chassis out of the equation.
So you see, I am suspicious about the authenticity of the document. I agree with mali's and devil's recommendation that if you are serious, you would be engaging Cisco SE/AM in your region. There are only three reasons, that I can think of, why you've posted this here. One of them is the intended purpose of this document (and the audience). -
Attempting to eliminate a dead spot in Wifi coverage [and implement AirPlay] have one Airport Extreme 802.11n and two Airport Express 802.11n's.
http://support.apple.com/kb/HT4145
The Airport Extreme is of course connected to cable modem and Ethernet switch, and one Airport Express is connected to the Ethernet network. As per instructions for creating a "Roaming Network", Airport Express is set to same SSID, security type, and Password.
Questions:
1. How does the client device know which Airport to connect to? In other words, will it switch to the closer WiFi transmitter automatically? The WiFi reception problem is intermittent in the fringe areas so what I do not want it for it to stick with the more distant Airport Extreme in the basement when the Airport Express which is closer will work better.
2. How can I tell which of the Airports the attached client device is using?
The third Airport Express will be in a third location - I was planning on using it also for expanding coverage but after reading the warnings about performance suffering when purely using WiFi for the expansion in this location ("Wireless Extended Network" without an ethernet connection) I have figured that the single wired Airport Express will be adequate and will use the third Express to do Airplay only.
http://support.apple.com/kb/HT4259
Question: Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
Mitch1. How does the client device know which Airport to connect to?
The Mac computer will automatically connect to the wireless access point with the strongest signal...which is probably the closest AirPort. An iPhone or iPad may not do this and will tend to stay connected to one AirPort.
2. How can I tell which of the Airports the attached client device is using?
On a Mac, open Macintosh HD > Applications > Utilities > AirPort Utility. Click on one of AirPorts. In the area to the right, locate the AirPort ID and jot that down. Then do the same for your other AirPort.
Move your Mac near one of the AirPorts and log on to the wireless. Hold down the option key on the Mac while you click the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device to which you are connected.
If you are close to the "remote" AirPort, and you see the AIrPort ID of the "main" router when you are testing, then you know that the network is not configured correctly.
Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
There will be a modest 10-15% bandwidth loss with the "extend" setup, assuming that the Express is located where it can receive a strong wireless signal from the AirPort to which it is associated. You can avoid the bandwidth loss if the Express is also connected via Ethernet as part of the roaming configuration. -
I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).
There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit -
Mac mini 2009 Mavericks won't boot. Chimes and power light comes on. USB ports have power. Blank display no logo,etc. Tried all keyboard boot functions, no help. Replaced RAM w/known good. No help. Removed HD and mounted in external enclosure and ran permissions and repair. No help. Upgraded HD to Yosemite and was able to boot another mini from HD mounted in external enclosure, reinstalled HD still no boot. Any ideas on how to proceed appreciated.
- Make an appointment at the Genius Bar of an Apple store. You have a hardware problem.
Apple Retail Store - Genius Bar -
Safari question here... Can I purchase a browser update for my mac book? I have OSX 10.6.8 and the "update software" function won't let me get past Safari 5.1.10. Please tell me I don't need a new computer just yet... Thx!!
You need to upgrade OS X.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
When I open a pdf document (like an E-version of a newspaper) in Mozilla and then switch to another tab to view another webpage, I am unable to use the scrolling function on the touchpad. I have to use the up and down arrows to get other pages to scroll. When I close that pdf document, everything works fine. I talked with customer support with Dell, and he said it was probably a glitch with Mozilla. So I tried to do the same thing on IE, and there was no problem scrolling with the touchpad while a pdf document was open on another tab. I would like to get a fix for this so I don't have to keep closing open pdf documents in order to scroll with the touchpad while on other tabs. Thank you
Hi elliezzz,
If you are having issues with your iPhone not being recognized by iTunes, you may find the following article helpful:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
- Brenden -
Sometimes when I open a link in a new tab and then switch to the tab, the address bar clears and I'll have to re open the tab and hope that doesn't happen again. Sometimes this happens again and again. Most of the times if I just open the link in a new tab and don't switch to it, this won't happen. But as I switch too the tab, the text would disappear and the link wouldn't open.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows) -
Switch and IIF Functions keep adding values.
Help,
My Report is adding my values with both Switch and IIF Functions.
I have reworked the below Switch expression as an IIF Function, I have used Null and IsNothing in replace of "0", I have replaced True with Not(Fields!January2014.Value =
"0"). But Unfortunately, no matter what I do in the below syntax it adds my values. The goal is to run a projection either from this
year's numbers or last year's, so if this year's numbers have not been created or equal "0" to use last years. Unfortunately, when there is a this year and there is a last year it is adding those two values. Any ideas? Please provide input.
Thank you,
=Switch(Fields!January2014.Value =
"0",CDbl(Fields!January2013.Value),True,CDbl(Fields!January2014.Value))What does your IIf statement look like?
=IIf(Fields!January2014.Value="0",CDbl(Fields!January2013.Value),CDbl(Fields!January2014.Value))
How is the January2014 field created in the dataset? And the January2013 field?
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek. -
iphone 3 dropped in salt water. Appears non-functional - won't turn on. Nothing on SIM card -- had that checked. Is there ANY way to retrieve the photos and contacts. There is no backup of them.
leave the phone in rice for >24 hours to see if it will recover
you can check itunes as well to see if there are backups there from the top of the screen hit edit (itunes on mac) > preferences > devices , and see if a backup is listed
also check icloud.com to see if you had any of the information backed up there (only possible if have have a 3gs or higher)
also there are data recovery companies that can recover data even from wrecked hard drives but its not cheap, if your interested in that I would say lookup a company called drivesavers, I believe they are authorized to work on even in warranty iphones
good luck -
My iMac won't start, it only has the apple sign with the timer and downloading bar at the bottom and then switches off.
Hi Paula2808,
I’m sorry you are having trouble starting up your iMac, that must be quite frustrating. There are some troubleshooting steps I would suggest in order to get you up and running again.
First I suggest using the steps in this article for the Apple logo appearing -
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
If things still are not working correctly, you may want to continue with the steps in this article -
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Thanks for using Apple Support Communities.
Best,
Brett L -
I cannot find a Loose Fit property for the new 3D plots (waterfall, ribbon) in LV 2009. As a result, my data range of 1402 to 1407 ends up on a Z axis range of 1400 to 1500 and looks like a flat line.
The Z Active Axis properties Range Maximum and Range Minimum can be used to set the range but the Z Axis Autoscale property had to be changed to False using either the front panel Plot Properties at edit time or using the Range Auto Scale property at run time on the block diagram. It could not be changed at run time by popping up on either the plot border or on the Color Palette.
In edit mode, R-clicking on the Color Palette's AutoScale Z did not make that property toggle or stick and did not change its function.
At run time, there are two AutoScale Z selections shown. One along with the X and Y scales and another by itselfat the bottom. Again, clicking the one that is part of the X and Y axis did not make its setting stick and did not have an effect. What does happen though is that the other AutoScale Z shown at the bottom of the Color Pallete popup does toggle its state. But clicking on the AutoScale Z shown at the bottom does not toggle its state.
The grey border region of the plot area contains at run time, popup setting for X,Y and Z AutoScale that likewise have no effect.
Or am I missingsomething ?
Message Edited by SteveP on 08-15-2009 07:55 PM
Attachments:
LV 2009 3D Plot Axis Autoscale.vi 18 KBSteve,
you should be able to successfully change the scales based on the min and max values as long as you explicitly turn off autoscale. In your program, I just right-clicked the Range Auto Scale property selected "change to write", then made a control so that I could set the value myself. Clean up the broken wires, and the program runs like it's supposed to - resetting it's scale range:
is this the result you wanted?
Misha -
Getting errors and LabView with ARM project won't compile
Hello there, I am currently turning to make a project run on a STM32f103C8 chip using LabView with ARM. I am currently trying to compile a ARM project but I have no been successful.
I have tried using the STM32F10x template uploaded by Joshua, and it tries to compile. At first I was getting the "stm32f10x_tim1.c" file missing error, but that was solved by downloading the file from firmware v1 and adding it to the includes folder. but now i am getting a new error saying "profile_timer.h" is missing.
I am using:
Windows 7
LabView 2010 evaluation
NI ARM module
and I am trying to compile a empty project
Here is the error code message, any hepl will be useful, thanks:
[12:39:37 PM] Status: Error
Build target 'LabVIEW'
compiling RTX_Config.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling Retarget.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling TargetInit.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling ARM_Serial.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling LVTree.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling Pict.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\include\os\rtx\LVDefs_plat.h(17): error: #5: cannot open source input file "profile_timer.h": No such file or directory
compiling arrresize.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\analysis\development\include\platdefines.h(321): error: #35: #error directive:
Target not created
Status: Build failed.blank projects using other included boards seem to compile fine
and i have added a mock "profile_timer" to the keil library (just as a quick fix) and it seems to have stopped a lot of the errors, however i am still getting a few
these seem to be:
compiling CCGDatalogSupport.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\libsrc\comms\CCGDatalogSupport.c(23): error: #5: cannot open source input file "CCGFileSupportPriv.h": No such file or directory
compiling CCGFileSupport.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\libsrc\comms\CCGFileSupport.c(22): error: #5: cannot open source input file "CCGFileSupportPriv.h": No such file or directory
compiling CCGFileSupport2.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\libsrc\comms\CCGFileSupport2.c(22): error: #5: cannot open source input file "CCGFileSupportPriv.h": No such file or directory
compiling CCGIrDASupport.c...
compiling CCGNetConnRefNum.c...
compiling CCGSerial.c...
compiling LVTree.c...
compiling Pict.c...
compiling arrresize.c...
F:\National Instruments\LabVIEW 2010\CCodeGen\analysis\development\include\platdefines.h(321): error: #35: #error directive:
Target not created
Status: Build failed.
i'll see if i can find a file for the ccgfilesupportpriv.h but the error directive worries me a bit
Maybe you are looking for
-
LiveCycle Designer problem saving in Adobe Reader
I re populated an old PDF file in LiveCycle Designer. Text, Date, Check boxes. When the new file is opened in Adobe Reader x, it will not save the data. Any way to fix this?
-
WYSIWYG - Diff between preview and print
I have a question. I converted a report to utilize an XSD in order to get the Dynamic Images to work. Customer was viewing report with ColdFusion and I converted to view with .NET. This was resolved. However, when viewing the report with ColdFusion i
-
Dynamic displaying fileds of a record
hi, i am doing a jsp app. user can register personal infomation into database. he can also customized which field of his own reocrd will be displayed. how can do that?
-
Hello: Do you know about programming new technology WIMAX with Lingo. Any Xtras, or documentation about this. Many thanks to all of you.
-
My ipad shows an error message saying, "Ipad not backed up. This ipad hasn't been backed up. Backups happen when this iPad is plugged in, locked, and connceted to wifi." I press "ok" and then it pops up again asap. Not able to do anything with my iPa