LAbview 8.0 and above

Anyone have Labview 8.0 and above ? I've tried to download the trial version but unable to do so. Please help me.
Thanks.

What exactly is the error you're getting with the download? Are you downloading from this page? Is it not starting, do you have a firewall, what?
We can't just give you LabVIEW.. that would be illegal!

Similar Messages

Creating a DLL in Labview 8.6 and calling it from Visual Basic 6.0

Dear friends,
I need to create a DLL in Labview 8.6 and call it from Visual Basic 6.0. The system works as follows:
I made an application using Labview 8.6 + Vision Assistant 8.6 where I can obtain the x,y coordinates of a template in an certain image being captured by an USB camera. The template coordinates change every time it moves and Visual Basic 6.0 must read these x,y values in real time. I found some information in the link http://zone.ni.com/devzone/cda/tut/p/id/3925, but it works for version 6.x of Labview and 8.6 version is different. Am I in the right path? If you have an updated tutorial like the one in the link above but for Labview 8.6 It would be very nice. Please help me.
Kind regards.
João Júnior

Hello Osvaldo,
I analysed the updated tutorial you sent me, but the thing is that it doen't show how to create the DLL in LV 8.6 but only show how to accessing the DLL from VB6. My problem is really HOW TO CREATE THE DLL IN LV8.6. In the link http://zone.ni.com/devzone/cda/tut/p/id/3063 there is detailed information about how to do this in LV6.x, the problem is that I don't find the path Tools»Build Application or Shared Library (DLL) in LV8.6, I think the procedure in LV8.6 is a little bit different. Don´t you have an updated tutorial on how to build a dll in LV8.6?How could you help me?
Kind regards.
João Júnior

Best way to move date between LabVIEW 7.1 and 2010

We have a large LabVIEW based control and data acquisition system that for reasons beyond the scope of this post is at and needs to stay at LabVIEW version 7.1 for the forseeable future... We are soon to add a camera diagnostic to this system that, again for reasons beyond the scope of this post, needs to be written in LabVIEW 2010... The 2010 piece of code will run and need to receive some information such as shot number, when to trigger, etc. from the 7.1 side of the system... Then after a shot has occurred and a camera image has been acquired, the 2010 code will do some on the fly processing of this image and within a few seconds will need to send back some results data to the 7.1 side...
The 7.1 code uses a tag engine approach to sharing data among different codes running on different machines... I think now that more modern versions of LabVIEW use a shared variable approach... But I need to communicate as I've described above between the two versions, 7.1 and 2010 (or it could be 2011 if that would offer some advantage)...
I'm new at this moving of data between versions like this so if something could offer some advice, especially if there is some tutorial information on this topic, that would be much appreciated... Thanks in advance for any help that you might be able to offer... thanks... bob...

It really depends if your tag engine like communication approach is a home brown solution or something like the LabVIEW DSC engine. If homebrown and well written you should be able to reuse the client library part of it in newer LabVIEW versions without to many hassles. If it is LabVIEW DSC it may be a bit more complicated since the only means to share DSC tags in version 7.1 was as far as I can remember their proprietary TCP/IP tag interface, which was replaced in newer versions with he shared variable engine.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Labview 8.0 and lvanlys.dll

I had an application developed on Labview 8.0 and has the main file of it as llb and included it as project as well.
I have 2 questions
1.How to create an installer using Labview 8.0 project window.?(i was able to creat exe,but when i create installer and install it in another pc which doesn't have any NI software,i'm not able to get the exe of the software.i'm not sure what im doing wrong?,Its able to show runtime engine 8.0.1 i guess)
2.My second is,My application requires lvanlys.dll.I had put the exe of the software in new pc and copied the lvanlys.dll file manually to that PC and when i try to run the executable,it shows "Generic Error:lvanlys.dll is not a valid labview file".Is this file dependant on labview version also?because i found in that PC,i have runtime engine of 7.1.1.But i had copied this dll (from resource folder)from a pc which has Labview 8.0 installed.
Is this a mismatch?
Kindly provide help on the above 2 queries.
Thanks
-Murali

1) To create installer in LabVIEW You have to right click Build Specification Select New and then Installer. A new window pops up ,select the way you you want installer to be made .Include the main VI in Source Files and in Additional Installers select LabVIEW RunTime Engine 8.0 (or the same LabVIEW Version in which you are creating the installer). After this click on Build and the installer will be made.
2) Better provide lvanlys.dll of the same version. Or insatall DAQ drivers(or device drivers) corresponding to the LabVIEW in which the installer was made. For 8.0 you can install any drivers after NI DAQ 8.0 on the system you are running the exe.Or youcan include NI DAQ in Additional Installers whilecreating the installer.
Gaurav Ahuja

How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
== URL of affected sites ==
https://storefront.kenexa.com/lithia/cc/Home.ss

There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
The menu item name changes to the browser UA you are presently using.
There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
You can just start trying IE versions (or the versions it says on the site) until it lets you in.

865PE Neo2-PLS users running on Prescott 3.0Ghz and above please come in

It's showing garbage for the cpu voltage in my bios and for those who read my previous posts know what I mean as I had posted the pictures before. I have flashed with different bios ver, tested using different psu, graphics, rams but no luck. Tested using different cpu on my mobo, the voltage showing correctly but they are northwood as I can't find spare prescott to test on my mobo.
I just called intel support to RMA and told them it's problem with the processor but I can't convince them
They want me to test my cpu on another mobo to test it out first but I can't find a spare 1
Anyone experienced garbage reading for cpu voltage so far using this mobo with prescott 3.0Ghz and above? Thanks

Well sad to say I forgot to ask them at the distro center haha coz I thought the problem lies on my mobo and hoping to get 1-1 exchange but when they showed me correct reading for the voltage when they tested my mobo using other cpu, I'm lost trying to figure out what could be the problem you see...
I did mail them today asking did they test my mobo using a prescott but I guess the earliest I can get their reply is tomorrow as they are closed today. Well I might be paying them another visit and ask them to test my prescott on other mobo as well the it's far from where I'm staying
Anyway now I just want to know if any users using this 865PE Neo2 P series mobo showing garbage for cpu voltage when using prescott 3.0Ghz and above to confirm. I guess I'm the only 1 so far haha

I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008.

I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008. I have selected system target file as nidll.tlc,make command as make_rtw and template nidll_vs.tmf. When I try to generate .dll file I get the following error.
Attachments:
SITProblem.JPG ‏101 KB

Hi,
No . I could not solve the issue. Presently we are using microautobox (from Dspace)for doing the RCP.
Himadri

Favor to ask : can you open this labview 2009 Vi and save it for me in a Labview 8.6 readable vi ?

Hi guys,
I have a favor to ask : May somebody would be nice enough to open this Labview 2009 VI and save it in a Labview 8.6 readable VI ? You'll probably have some missing blocks cause I use specials ones but I don't want to have to re-make all the VI.
Thanks you very much
G.
Solved!
Go to Solution.
Attachments:
Control3.vi ‏29 KB

notimperial wrote:
Probably not the right place to do this, but could someone onpen this in labview 2010 and save it in a format compatible with labview 2009?
Thank you in advance
You are right we have a thread for this here.
http://forums.ni.com/t5/LabVIEW/Downconvert-VI-Requests/m-p/1067229
Here is your vi please use the downconvert thread next time.
Tim
Johnson Controls
Holland Michigan
Attachments:
WFMreaderIII.vi ‏53 KB

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

Can't open pdf for Reader 9.0 and above on iPad2

Hi,
Would greatly appreciate the advice of the experts here.
My iPad2 can view most pdf documents, but when the pdf requires Reader 9.0 and above, it can't be viewed in the Reader I've installed (which is the latest version on iTunes). Here are the warning note and error message:
Warning note:
The PDF attachment is only supported by Adobe Reader 9.0 and above. If you are not able to view the attachment online, please right-click the attachment link and save the file onto your local machine. Please open the downloaded file using Adobe Reader 9.0 and above.
Error message:
>>>
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF
viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by
visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader
<<<

Hi SGckc,
This document is almost certainly a dynamic XFA form. Unfortunately, our mobile Reader does not support displaying or filling such forms. The application that produces this form embeds this message into the document so that non-supportive viewers (like ours) will display this "error" page when the document opens. I do realize that this is confusing and I would like to add some additional detection to our Reader for this case. However, we've avoided doing this for fear of confusing users even further. Your feedback helps though. Hopefully we'll find a way to detect this case and present a better message to the user like: This form is not supported by the mobile version of the Adobe Reader. Please open and fill it on the non-mobile version of the Adobe Reader for Windows, Linux or Mac OSX.
Thank you for contacting us!
Pat

Itunes 10.1 and above crashes when right-clicking any playlist entry?

trying to access the context menu in a playlist entry will bring the beach ball for a few seconds and forces itunes to quit unexpectedly. version 10.1 and above. on several machines (G5, intel)
here is what did not help:
– reinstalling 10.5.8 combo update
– reinstalling latest security updates (up to v007)
– reinstalling itunes 10.1.1 via installer instead of sw update
– deactivating all ore some quick time plug-ins
– system boot in safe mode
– log-in from a new created user account or as root
here is what helped so far - but is not satisfying:
– fresh install of 10.5.8 with all updates on a different volume
– switchback to v10.0.1
any suggestions??
thank you!

Found out:
itunes 10.1 and above is not compatible with openmenu X, up to current version 2.05. excluding itunes in the advanced tab solves the described problem.

I accidentally deleted Garageband on my MacBook Pro, version 10.6.8. The new version of Garageband is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD for my computer

I accidentally deleted GarageBand on my MacBook Pro, version 10.6.8. The new version of GarageBand is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?

The new version of GarageBand is only compatible with 10.9 and above.
If your Mac can run MacOS X 10.6.8, it probably can be upgraded to Yosemite, if you don't have to stick to Snowleopard for other reasons.
Is it possible to still get the older version?
Amazon or eBay are still selling iLife '11 installer disks, and you could reinstall GarageBand from these DVDs. But it will be expensive.
Have you checked your backups, if you can restore GarageBand from a backup?
OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
Sometimes the AppleStore Support will replace missing installer CDs for a fee.

TS1398 I have an iPhone 4 and want to download an audio book from audible . Com . My device is saying safari can't download , also tried it on iPad and it won't work . Why is this ? Also can't find app for audio player for iOS 4 only iOS 5 and above . Can

I have an iPhone 4 and want to download an audiobook from audible.com. My iPhone says safari can't download the item . Why? Also the audible app is for iPhone 5 and above ? Any suggestions ?

Also the audible app is for iPhone 5 and above
According to https://itunes.apple.com/us/app/audiobooks-from-audible/id379693831?mt=8 it only requires iOS 5 or later and it is "optimized" for iPhone 5. I think it will likely work well on your iPhone 4.
Compatibility: Requires iOS 5.0 or later. Compatible with iPhone, iPad, and iPod touch. This app is optimized for iPhone 5.

Printing an iframe with pdf using javascript is not working in IE8 and above

I have a problem with printing and Iframe with PDF in IE 8 and above
Following is my javascript:
var urlValue="";//Path of the file to be printed
var div = document.getElementById("printerDiv");
div.innerHTML = '<iframe src="' + urlValue + '" id="frame" name="frame" style="width:100%;height:100%;"></iframe>';
frame.focus();
frame.print();
This same thing is working fine in other browser but for IE is just not invoking the print dialog.
Also I tried to get the frame.print(); on load of the frame but even that is not working exactly as that way it print the parent window in output.
Few things I tried like:
1) div.innerHTML = '<iframe src="' + urlValue + '"
onload="this.contentWindow.print();"></iframe>';
2) frame.contentWindow.focus();
frame.contentWindow.print();
3) window.document.getElementsByTagName('iframe')['frame'].onload = (function () {
frame.focus();
frame.print();
I need to get the print of only the content which is in Iframe which I am binding in "printerDiv" by javascript.
Any perfect/different solution from which I have tried then please post here?
Thanks.

PDF documents are hosted in an ActiveX or netscape plugin control which have their own printing functions.
Start>Adobe Reader>Edit>Preferences - to adjust what functionality the PDF document viewer addon displays (menus etc).
Tools>Manage Addons>Show all addons
make sure you have both the x86 and x64 versions of your PDF reader Active X control installed and enabled. I would recommend also that you update to the latest version of the vendors' (Adobe?) plugin.
Possibly you have disabled scripting of ActiveX controls in the IE security zone that your parent page maps to. Also there is an IE security zone feature that prevents navigation to a domain in a zone of lower integrity.
Tools>Internet Options>Security tab, click "Reset all zones to default".
when asking developer related questions it is helpful if you can include a link to your website.
Rob^_^

Windows 7 with labview 8.5 and NI-8451

Hello,
I am using LabVIEW 8.5 with NI-8451 device on Windows 7. I installed 1.1 driver for NI-8451, but I am unnable to access any subVI connected with NI-8451. Can you advise?
Thank you.

Hi miso2562,
The issue is most likely compatibility between the drivers, LabVIEW, and the OS. LabVIEW 8.5 is not supported on Windows 7 (only up to Vista), and NI-845X 1.1 is not supported on Windows 7 either (only up to XP). Also, NI-845X 1.1 does not support LabVIEW 8.5 either (only up to 8.2).
Ideally, if you use Windows 7 you should have LabVIEW 2009 SP1 or newer and NI-845X 2.1 or newer (1.1.4 could work as well). If you can move to XP, LabVIEW 8.5 and NI-845X 1.1.1 should work.
References for compatibility:
http://digital.ni.com/public.nsf/allkb/B972242574D4BB99862575A7007520CB
http://download.ni.com/support/softlib//i2c_spi/ni-845x/1.1/readme.htm
As for your main question "unable to access any subVI connected with NI-8451", do you mean they do not show on the function pallete?
- FCTesting

LAbview 8.0 and above

Similar Messages

Maybe you are looking for