LabVIEW 8.0 (Prof.Dev.System) and Embedded controller programming?

Hallo!
Can someone please tell me if it is possible with this development system (as it is) to build applications that will run on Adlink Geme-2000 Embedded Controllers (http://www.smallformfactors.com/products/search/fm/id/?17483) ? They run either with OS WinXPEmbedded or WinCE.NET.
Or will I have to get me any toolkit to be able to do so or won't it work?
Thanx,
Stefan

Dear Stefan
You can run LabVIEW 8.0 on any Windows XP Embedded box.
See this tutorial for a step-by-step explanation: http://zone.ni.com/devzone/cda/tut/p/id/4011.
Best regards
Philipp Roessler

Similar Messages

X23 Bios and Embedded Controller Program Updating

I am trying to update my bios on my x23. I have relatively old versions of both the bios and the ECP, and both say that they won't work without more current version of the other. Which one am I supposed to update first?
thanks,
David

It is confusing; on the BIOS page it says update the BIOS first and on the ECC page it says update the ECC first
What I suggest is to look at the table at the very bottom of the pages to see which is compatible with what and carefully work out which, if necessary older, version of what can be installed first untill you reach the current versions of both. It may be possible to leap-frog some of the updates.
Hope I explained that well enough.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Reset password sedadm (SED - dev system) and SEQadm (SEQ - QA)

Hello Experts,
Resetting sedadm or seqadm password at OS level, will it affect any where in SAP application.
If so, what are the places we need to take care this user password in sap application.?
Note: sedadm (SED - dev system) and SEQadm (SEQ - QA)
Thanks
Praba

Hi,
Check below link to change password:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/aa/1dc94af0fa11d3a6510000e835363f/content.htm
Thanks
Sunny

How to Purchase group configer in dev system and how to traverse quality

Hi All
I need ur help regarding for how to configer the Purchaseing group in dev system and how to traverse to Quality and production.
Thanks
Happy

Hi,
You can create the Purchasing Groups using the following settings.
SPRO-MM-Purchasing-Create Purchasing Groups.
Create a new entry for Purchasing group & save it in a Transport request & transport it to QAS & PRD.
Note: We define the Purchasing Groups @ client level
Thanks & Regards,

[Request] Move Windows Control Panel applet from "System and Security" to "Programs"

The "Flash Player (32-bit)" Windows Control Panel applet should be moved from "System and Security" to "Programs" where the Java applet is.
Vote: https://bugbase.adobe.com/index.cfm?event=bug&id=2953107
Thanks

njb,
Why not just run the ThinkVantage System Update and let it install as usual. You can also "un-check" those drivers that you don't want to install.
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

Go to the Edit -> Preferences-> Playback
In The bottom section of the page click the drop down menu by Play Audio Using and select Windows Audio Session or something other than "Direct sound" or whatever it displays. Click Okay. This worked for me! I hope it works for you too!
Thanks,
John

Unable to update BIOS or Embedded Controller Program on X40

Hi,
I have an IBM Thinkpad X40 laptop. I currently have BIOS version 1.43 and Embedded Controller Version 1.32. I am trying to upgrade both of these separately using the following programs:
BIOS update (Non-Diskette) - ThinkPad X40
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-53881
Embedded Controller Program (Non-Diskette) - ThinkPad X40
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-53882
I download and run them, go through the 4 step wizard and then the machine reboots. The problem is that it doesn't update the BIOS or the ECP but it also doesn't tell me why or even tell me that it's failed.
Has anyone experienced this issue or know what causes this? I am unable to do this via a diskette because I don't have a floppy drive on this model.
Solved!
Go to Solution.

OK, I've fixed this now.
I had Kaspersky Internet Security installed and had disabled it manually but it was obvisouly still blocking fundamental system changes like these. I uninstalled KIS completely and then ran these updates again and all worked fine.

Should one update Embedded Controller program before a BIOS update ?

Hello All,
I have an IBM Thinkpad 600E 2645 4AU that has an old version of BIOS that am trying to update to the latest.
I read on the net that before updating the BIOS its required to update the Embedded Controller program.
This is what I read and am quoting :
" It is also important to understand that Thinkpads from IBM have two separate firmwares: the BIOS, and the Embedded Controller program. A given BIOS version will require a certain version of the Embedded Controller program. The IBM documentation is sometimes unclear about the order in which these two firmwares should be updated. On most, but not all Thinkpads, the correct update order is Embedded Controller program first, and then the BIOS. Make sure to do the two updates immediately one after the other. Newer models from Lenovo update both the Embedded Controller program and the BIOS at the same time, so you don't have to worry about it."
Could anyone let me know if this applies ? I searched the Lenovo site for a Embedded Controller program for my laptop model but found none. So wondering if this model would require the Embedded Controller program update ?
Thanks.
Alex

OK, I've fixed this now.
I had Kaspersky Internet Security installed and had disabled it manually but it was obvisouly still blocking fundamental system changes like these. I uninstalled KIS completely and then ran these updates again and all worked fine.

Botched Embedded Controller Program Service Utility upgrade.

Hi,
It seems that I might have a little problem. I've recently started updating my T43 with ThinkVantage Update program and the first couple of updates went like a breeze. Even the new BIOS installed alright. But when I started upgrading Embedded Controller Program Service Utility it suddenly stopped at that gray screen saying that the system was now updating and is telling me not to turn it off in any case. The thing is, it says it should take about 30 seconds while I have been waiting for over an hour but to no avail.
I am a little afraid of turning of my computer, don't really want to damage it. Does any of you have any ideas what should I do in such circumstances? Any help would be much appreciated.

with the bios upgrade through windows, the process is quite simple but there is potential for interference from other programs that is going on in the background, this is especially a problem with laptop that have not been maintained properly in terms of regular virus scanning, deleting unwanted programs, keeping background processes to the minimal. For a more secure update, try to do the bios update through the ISO image method.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Determine Version of Embedded Controller Program in T-40

Using the reboot and press the ACCESS IBM button method doesn't reveal which version of the Embedded Controller Program is on the older T-40's. How would I determine if I have the most recent version?
Thanks
T41 2373-7FU
Windows XP Pro, 1.6GHz Pentium M, 2GB RAM, 160GB HDD

Using the reboot and press the ACCESS IBM button method doesn't reveal which version of the Embedded Controller Program is on the older T-40's. How would I determine if I have the most recent version?
Thanks
T41 2373-7FU
Windows XP Pro, 1.6GHz Pentium M, 2GB RAM, 160GB HDD

Copy LabView VI from on dev system to another dev system?

We have two development systems here. I need a VI that is on the other system. How do I get the VI from one development system to the other development system? Do I need to deploy it? Or can I just copy it?
Thanks,
Steve
Solved!
Go to Solution.

Just copy it over. Make sure you have all of the subVIs that it might possibly call.
And if these systems are for the same thing, I recommend networking the two systems together and use a source control software (like SVN) to keep the codes in sync.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How can eCATT used for testing of z program on DEV system &data on Quality?

Hello All,
Background - Custom object is (for e.g. any report program) which I want to test is present on DEV system and required data (e.g. data that will be passed to selection screen fields of program) on Quality system.
Question -How to do testing of program using eCATT without transporting my program to Quality box? Please anyone can give me any insights on this to fix the data availability issue.
My efforts - Created System data container specifying RFC connection for Quality system. Created Test Data Container with data available on Quality box. Here, I specified target system as 'Quality' for the data. Created Test script (for SE38 tcode ) and did the parameterization(giving program name as parameter , other selection screen fields) and set the Target system for each parameter to QUALITY. Created Test Configuration specifying with all required parameters .
When I ran the test script from Test Configuration, test script started to run on Quality system. But failed saying program/object does not exist on quality box.
Importance - This is required as no data available on DEV box, need to move program/object to Quality system. Hence, multiple transort requests are created.
Edited by: Tripti on Feb 26, 2012 9:29 AM

Thank you for your quick response, BalusC. I really appreciate your answer.
Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
Best Regards, Ailsa

Problem when transporting form from DEV system to PRODUCTION system

Hi Experts,
We are developing forms in ABAP, for example there is a form developed in dev system and this form has JS coding in some UI elements events like initialize, on change and on exit; also has one script object defined as variable. this script object has some functions defined in order to do some common validations and field specific ones too.
The form in DEV work fine, all the functions calling, all the validations and the events are working properly as expected. But there is a problem when we moved the changes done in development system into production system. Specifically the script object has the problem: even though the coding is the same in both systems, in production system we had an script error: "Body.CATALOGPARAMS has no properties", as if the Body.CATALOGPARAMS was never instanciated, or it is not defined...
The code that produces this error is the following:
var itemCount = 0;
itemCount = Body.CATALOGPARAMS.DATA.instanceManager.count;
CATALOGPARAMS is table defined as context table coming from an ABAP FM where is filled and passed into the form.
In order to fix this problem I changed that part for the following
var itemCount = 0;
var catalogTable = null;
catalogTable = xfa.resolveNode("Body.CATALOGPARAMS.DATA");
itemCount = catalogTable.instanceManager.count;
This still works as fine as the other in DEV system. But my question is: will I have the same problem when we transport the changes to production system, you have to know that a transport is not something that you can do every day, so I am taking precautions before the transport. Which of both coding is the best for doing this?
Any observations, comments, questions in order to clarify some points are welcome, so please do it.
In advance, thanks a lot.
Mauricio.-
Edited by: Mauricio Poblete on May 11, 2010 4:20 PM

As always, you are the first one to reply... thanks for that!
before everything, I activated the form, then I added this form to a new transport using se80 transaction: I navigated through the form objects and I added the form to a new transport by second click on the form -> other functions -> write transport entry. is this the correct way to assign a transport package with the entire form (including script objects, layouts, and all you told in the last reply)??
Can you give me a guide on how-to add the specific parts to the same transport for forms?
as always, thanks in advance.
Mauricio.-

Activation BC first time in DEV system

Hi,
I was told to activate following BC in DEV system and it is CRM-BI implementation. I need to activate: 0CIC_MP01, 0CIC_MP02, 0CRM_CT_I, 0CRM_CT_O, 0CRM_C06, 0CRM_C07, 0CRM_TGRP, 0CRM_TGCT, 0CSAL_C01.
My questions are:
01.Exactly same above objects do I need to activate in QA and PROD also?
02.In "Grouping" tab, if I select 'Only Necessary Objects', is it enough or do I need to select 'In Dataflow Before and Afterwards'.?
03. What are general steps should I follow beginning of project, regarding Business Content Activation?
Thank you.
Regards,
Md

01.Exactly same above objects do I need to activate in QA and PROD also?
You collect the objects in a transport and send it across systems - you do not activate in the PRD systems...
02.In "Grouping" tab, if I select 'Only Necessary Objects', is it enough or do I need to select 'In Dataflow Before and Afterwards'.?
If nothing is there currently - you would have to do Dataflow before and after...
03. What are general steps should I follow beginning of project, regarding Business Content Activation?
Make sure you can raise requests in the system before doing so. Also the source systems should be available and also the datasources required for the same should be replicated into the BI system.

Can't update embedded controller

tried different ways including thinkvantage and everytime update will freeze at the update screen. bios update always succeeds. Any clues?. laptop is T43 1871 came with bios 1.23 and embedded controller 1.03. I was able to update the bios to 1.29 but I was always faced with embedded controller 1.05 update screen freeze problem. my question if bios firmware has to match embedded controller firmware and using thinkvantage update why bios update was listed as recommended and embedded controller update listed as optional? TIA.

I'm having the same problem.
Help!

LabVIEW 8.0 (Prof.Dev.System) and Embedded controller programming?

Similar Messages

Maybe you are looking for