LabVIEW 8.2 can't work with DAQmx program written using LabVIEW8.0 ?

My old LabVIEW program is using the DAQmx sub-vis from folder: C:\Program Files\National Instruments\LabVIEW 8.0\vi.lib\DAQmx
e.g. C:\Program Files\National Instruments\LabVIEW 8.0\vi.lib\DAQmx\create\channels.llb\DAQmx Create Channel (AI-Voltage-Basic).vi
After I installed LabVIEW 8.2 and NIDAQ831.zip (~600MB), there isn't a folder called DAQmx in folder:
C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\
When I load my old program, it need I specify the location of, e.g. DAQmx Create Channel (AI-Voltage-Basic).vi,
I copied DAQmx folder from \LabVIEW 8.0\vi.lib\ to \LabVIEW 8.2\vi.lib\
After I copied the DAQmx folder, right click on "block diagram" under "measurement I/O" the folder "NI-DAQmx" comes out and I can pick all the vis inside "NI-DAQmx"
However, all the vis are not executable.
My old program find all the vis needed to load; however, the vis are not executable, e.g. DAQmx Create Channel (AI-Voltage-Basic).vi, please see the attachment.
Anyone know how to solve this? Thanks.
------- LabVIEW 2009, So Easy, Even a Therapist Can Do It -------
Attachments:
DAQmx_Error.JPG ‏97 KB

You should make sure that in the installer options of DAQmx the support VI's for LV 8.2 are installed.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Similar Messages

How can I work with lightroom when I use two computers ?

I am new to Lightroom and work with a laptop at home and a PC at work. Before I started to use LR3 I simply duplicated my pic files onto both machines, edited on whichever machine I wanted and then synchronised the folders. This system provided me with a working copy at either home or work and also a backup copy on the other machine.
I would like to operate the same system with LR3 but am unable to figure it out due to the automatic filing system used by the programmme to seperate the raw files and the instructions for those files.
Can anyone provide me with simple step by step instructions on how to transfer the files/instructions by using a flash drive and "Copy and replace"system
as I am totally confused by the grammar, syntax, and terminology used by Adobe.

Hi Geoffbubbles,
if you see only 1 photo you did export only 1 photo in the catalog.
Make sure you select all (e.g. <ctrl> A or remove the tick from "export selected photos only" in the dialog box of export-as-catalog =>will pick the total folder).
What Dorin mentions are catalogs as transportation vehicles between the two LR computer catalogs.
Let's assume you start on your home-comp and transfer to the work-comp.
When you EXPORT you give a name "home-to-work" for the transport catalog. You decide if you include the pictures by ticking "exclude negative files".
You would do so only for the first time, when your work-comp would not yet have them.
These are the original files which would never be touched, but which LR needs to have available to do develop work (i.e. to write develop instructions into its database). [Or maybe only you need them in order to have LR display the effects of what you are doing, if your slider settings achieve your desired result.]
When you transfer your new settings from the work-comp to the home-comp which has the original files already you only need to transfer the DB-records for the files, i.e. the catalog parts. Then it is sufficient to export-as-catalog (name it "work-to-home") without the tick for the negative files. Which will obviously save a lot of data to transfer.
As would leaving off the tick for "include available previews", but then your receiving computer would have to render the previews itself - your choice where you spend the effort.
Depending on your ticks checked in export dialog the data on the transfer stick will show different folders:
1 wrapping folder with the name you specified as transportation catalog name (in the example above "home-to-work")
therein the catalog file *.lrcat (home-to-work.lrcat)
if "include negative files" ticked: as many subfolders as the original folder structure/names of the pictures in it had on the sending machine
if "include available previews" ticked: an *Previews.lrdata-folder ("home-to-work Previews.lrdata") with lots of subfolders labelled 0...F
On the receiving computer, when you IMPORT FROM CATALOG, you only select the *.lrcat-file.
In the dialog box you decide if you import the negative files (prereq you had included them) or if you just add them without moving (why not leave them on the stick i.o. actually copying over to the work-comp?). If there are no new photos, but just new settings, you can either overwrite your old settings (which is probably your intention) or tick "preserve old settings as virtual copies".
When you use Dorins smart collection "Touched today" the virtual copies should not show up upon re-export on the way "work-to-home", provided you have further tweaked the master versions only. Or they do because in the end you liked them better and continued tweaking on them.
Note if you do not include previews: you might need to tell LR on the receiving comp to rerender the previews if it contains the photos and earlier previews already - I am not sure, if LR starts off on its own to rerender them.

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

SGD4.6 can't work with Java update7.51

SGD4.6 can't work with Java latest version update 7.51. The webtop keeps showing "loading", is there any patch for this issue?
When Java released update 7.21, it also can't work with SGD4.6, then Oracle fixed it by updating a patch, so how about this problem?

Have a look at this Thread:
https://community.oracle.com/thread/2614978

How can I work with big iMovie 6 file?

I am trying to make a one 70 minute movie with iMovie 6 but am having great difficulties because the file has reached 78 gig and is now unworkable because it is just too slow to even play. Even cutting it in half does not solve the problem. Each half will play but I can't work with them in the timeline. I need to add more audio files and music. Any suggestions?

I suspect most slowdowns occur because of complex audio, not the size of the project. It sometimes helps to export the audio to an AIFF file, then re-import that file back into the project and place it in its own audio track. When you disable the audio of the other tracks, playback is improved.
That makes it harder to edit a half-finished project, however. It's a technique best reserved for almost-finished projects.
You could export the timeline to the camera, then re-import it to a new project. That will both make the project smaller and "flatten" its audio and video. Most clips will return as the clips they are now.
70 minutes of video is ordinarily about 15GB, so something has increased the size substantially. (That's not normally a problem you have to worry about; the size of the project itself is probably not the problem.)
Karl

Can't work with the Query after I save a 3.5 Query in 7.0 Query Designer

Hello,
my Problem is, I open a 3.5 Query in a 7.0 Query Designer. Then I save as another name. When i Open the Query
i can't change things... WHY ? A Standart Transport is OK in RSA1, Transport, BexTransport. all ok..
can't work with the Query after I save a 3.5 Query in 7.0 Query Designer
Best Regadrs

Hi,
I cant click on it. It is grey..
I open the 3.x Query in a 7.0 Query Designer and save as another name.. Then I try to open it with the 7.0 tool. The Query is displayed. But I cant change something...
thnx

Can TS work with sql server compact or express?

I'm don't have much experience with the underpinning of database systems. I know conceptually how they work and can hack my way through sql queries. Is there something fundamentally different about a Sql Server Compact itnstall versus Sql Server versus Sql Server Express? Can TS work with any of them with a proper connection string?
My problem is at our local site a previous employee set us up on Sql Server and wrote a web app (.asp) to do the query for presentation on a web page. At an offsite location they can't install Sql Server and I'm trying to figure out the best path for them to be able to use the same .asp tool we have. My gut feeling is the .asp tool is probably set up such that it wouldn't take much to make it work with MySql but because I don't have the luxury of time I'm hoping someone can point me in what they think might be the easiest direction (whether that is sql compact if possible or MySql for them).

Hi,
TestStand works with SQL server express. (not sure about SQL server compact).
Ravi

Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

Ear Sir: Yesterday on 18.09.2014 evening, I wanted to install IOS 8.0 according to your instructions iPhone 5S.during installation Stopped working and was closd, I can not work with him. Ibought it in the United States Apple Store Fifth 40venue 767 N

Dear Sir: Yesterday on 18.09.2014 evening, I wanted to install
IOS 8.0 according to your instructions iPhone 5S.during installation
Stopped working and was closd, I can not work with him. Ibought it in
the United States
Apple Store Fifth 40venue 767 New York NY1053
iPhone 5s Spase Gray 32 gb verizon.
Part Number: ME344ll / A.
Serial number: DN*******NjM.
Model A1533. I would like to request a new password for opening the
iPhone. Passwod..... Thank you very much,
Im not difficult for you to request a quick answer.Israel.
<Personal Information Edited By Host>

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - it looks like somebody has asked the hosts to remove your personal info from your post (it's not a good idea to post any personal info on any public forum).
What do you 'stopped working and was closed, I can not work with him' ? What exactly are you seeing on the phone's screen ?
If it's the activation screen and you can't remember your password for your account then see if you can get it reset via http://iforgot.apple.com

Can Kuler work with Photoshop Elements 5.0

Can Kuler work with Photoshop Elements 5.0 and is it of
value?

Hi Chuck,
Photoshop Elements 5.0 does not support Adobe Swatch Exchange
(ASE) files, but you can copy/paste HEX values from kuler into
Elements.
Lydia

My hard wear and soft wear crashed, did a backup on all my files.When I now open them the are all "preview"!!! How do I get my old documents back? it should be pages, and numbers, ight now I can't work with them

My hard wear and soft wear crashed, did a backup on all my files.
When I now open them the are all "preview"!!!
How do I get my old documents back? it should be pages, and numbers, right now I can't work with them

Reinstall OS X

Why the same UI login script can't work with OS X 10.7 but 10.6 fine

HI everyone,I can use a script as
/usr/bin/osascript <<AppleScript
tell application "System Events"
keystroke "username"
keystroke return
delay 1.0
keystroke "password"
delay 1.0
keystroke return
end tell
AppleScript
to remote log in via UI when I'm in mac 10.6, but now it can't work with Lion,
got an "execution error:An error of type -10810 has occurred.(-10810)" message
then try another one which also works fine in 10.6:
osascript<<EOT
tell application "System Events"
tell process "SecurityAgent"
set value of text field 1 of group 1 of window 1 to "root"
set value of text field 2 of group 1 of window 1 to "password"
delay 0.5
key code 36
delay 0.5
key code 36
end tell
end tell
EOT
still got error,need your help ，thanks a lot ~

Either purchase Snow Leopard (if it will run on your computer) and then upgrade to iOS 7 or return the Nano.

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
Product updates

Can XI work with a query or infoset in ECC?

Hi All,
Can XI work with a query or infoset in ECC? if it possible how can achive that?????????
Regards

Hi ,
XI Cann't work directly with query or infoset . Either you can use ABAP Proxies or RFC . Which will help you
Regards,
Jude

Does T400 can only work with up to 4GB RAM?

Does T400 can only work with up to 4GB RAM?
Here (http://support.lenovo.com/en_NO/product-and-parts/detail.page?DocID=PD005598), it says 512 MB, 1 GB, 2GB, or 4GB memory.
So if more than 4GB RAM, will it do harm to the hardware of T400? Or just only 4GB will be used, and no any harm?

That doc was probably written when there were not 4GB DIMMs available, or at least being commonly used. T400 will work with any combination of 1GB, 2GB and 4GB DIMMs, up to 8GB total. I tried single 8GB DIMM and it didn't work

LabVIEW 8.2 can't work with DAQmx program written using LabVIEW8.0 ?

Similar Messages

Maybe you are looking for