LabView 8.2 hangs when trying to edit multicolum​n listbox cell on tab control
The message subject states the problem. The only other thing that might be useful is that the code processing the listbox is within an event structure. A scaler control and boolean operate OK independently until the list box cell is selected and the keyboard enters one digit causing the hang.
Thanks, Fran
Thank you for the update Fran.
I lost my bet and you earned your stars.
So it sounds like the issue was the multiple event structures alone.
I just like to keep track of what the final fixes are.
Ben
Message Edited by Ben on 12-06-2006 04:50 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Similar Messages
-
ICal hanging when trying to edit/delete recurring event
I have a calendar entry in iCal that recurs every week through the end of the year. I know this particular entry is causing issues in iCal so I have tried deleting it and/or editing it, and every time I do, it hangs iCal. Any thoughts/ideas? I do sync to a Palm using MissingSync but this calendar entry does not show up on my Palm so I can't delete it there. Any ideas? I would just like to delete the entry.
Wow, just found the answer - YzGy posted this link <http://discussions.apple.com/thread.jspa?messageID=7449164�> and I did as instructed and I'm back up and running. For some reason, this recurring event was on my calendar 12,300 times.
-
Build: 281393 hanging when trying to edit file using RDS
Hi
OS is Windows 7 Professional Service Pack 1. Crash report is:
Version=1
EventType=APPCRASH
EventTime=129774040658891708
ReportType=2
Consent=1
UploadTime=129774040659881765
ReportIdentifier=a82cdc01-78c0-11e1-8508-001f16c23110
IntegratorReportIdentifier=a82cdc00-78c0-11e1-8508-001f16c23110
Response.BucketId=2858491085
Response.BucketTable=1
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=CFBuilder.exe
Sig[1].Name=Application Version
Sig[1].Value=0.0.0.0
Sig[2].Name=Application Timestamp
Sig[2].Value=4d87abff
Sig[3].Name=Fault Module Name
Sig[3].Value=MSVCR71.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=7.10.3052.4
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=3e561eac
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=000128fe
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=2057
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=7f8a
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=7f8a085c4e5875ea037589b22bfcd15b
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=03ba
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=03baba7e97b6772126ebdb1387282ba1
UI[2]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\CFBuilder.exe
UI[3]=CFBuilder.exe has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\CFBuilder.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\Windows\system32\kernel32.dll
LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
LoadedModule[4]=C:\Windows\system32\USER32.dll
LoadedModule[5]=C:\Windows\system32\GDI32.dll
LoadedModule[6]=C:\Windows\system32\LPK.dll
LoadedModule[7]=C:\Windows\system32\USP10.dll
LoadedModule[8]=C:\Windows\system32\msvcrt.dll
LoadedModule[9]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6 .0.7601.17514_none_41e6975e2bd6f2b2\COMCTL32.dll
LoadedModule[10]=C:\Windows\system32\SHLWAPI.dll
LoadedModule[11]=C:\Windows\system32\IMM32.DLL
LoadedModule[12]=C:\Windows\system32\MSCTF.dll
LoadedModule[13]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\plugins\org.eclipse.equinox.launcher.win32.win32.x86_1.1.100.v20110502\eclipse_1406.dll
LoadedModule[14]=C:\Windows\system32\ADVAPI32.dll
LoadedModule[15]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[16]=C:\Windows\system32\RPCRT4.dll
LoadedModule[17]=C:\Windows\system32\VERSION.dll
LoadedModule[18]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\jre\bin\client\jvm.dll
LoadedModule[19]=C:\Windows\system32\WINMM.dll
LoadedModule[20]=C:\Windows\system32\MSVCR71.dll
LoadedModule[21]=C:\Windows\system32\apphelp.dll
LoadedModule[22]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\jre\bin\verify.dll
LoadedModule[23]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\jre\bin\java.dll
LoadedModule[24]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\jre\bin\zip.dll
LoadedModule[25]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[26]=C:\Windows\system32\rsaenh.dll
LoadedModule[27]=C:\Windows\system32\USERENV.dll
LoadedModule[28]=C:\Windows\system32\profapi.dll
LoadedModule[29]=C:\Windows\system32\CRYPTBASE.dll
LoadedModule[30]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\jre\bin\net.dll
LoadedModule[31]=C:\Windows\system32\WS2_32.dll
LoadedModule[32]=C:\Windows\system32\NSI.dll
LoadedModule[33]=C:\Windows\system32\mswsock.dll
LoadedModule[34]=C:\Windows\System32\wship6.dll
LoadedModule[35]=C:\Windows\system32\NLAapi.dll
LoadedModule[36]=C:\Windows\system32\napinsp.dll
LoadedModule[37]=C:\Windows\system32\pnrpnsp.dll
LoadedModule[38]=C:\Windows\system32\DNSAPI.dll
LoadedModule[39]=C:\Windows\System32\winrnr.dll
LoadedModule[40]=C:\Windows\system32\IPHLPAPI.DLL
LoadedModule[41]=C:\Windows\system32\WINNSI.DLL
LoadedModule[42]=C:\Windows\System32\fwpuclnt.dll
LoadedModule[43]=C:\Windows\system32\rasadhlp.dll
LoadedModule[44]=C:\Windows\system32\uxtheme.dll
LoadedModule[45]=C:\Windows\system32\ole32.dll
LoadedModule[46]=C:\Windows\system32\CLBCatQ.DLL
LoadedModule[47]=C:\Windows\system32\OLEAUT32.dll
LoadedModule[48]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\jre\bin\nio.dll
LoadedModule[49]=C:\Windows\System32\wshtcpip.dll
LoadedModule[50]=C:\Users\Brian\Adobe ColdFusion Builder 2.0 Configuration\configuration\org.eclipse.osgi\bundles\244\1\.cp\swt-win32-3738.dll
LoadedModule[51]=C:\Windows\system32\comdlg32.dll
LoadedModule[52]=C:\Windows\system32\SHELL32.dll
LoadedModule[53]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[54]=C:\Windows\system32\WININET.dll
LoadedModule[55]=C:\Windows\system32\Normaliz.dll
LoadedModule[56]=C:\Windows\system32\iertutil.dll
LoadedModule[57]=C:\Windows\system32\urlmon.dll
LoadedModule[58]=C:\Windows\system32\CRYPT32.dll
LoadedModule[59]=C:\Windows\system32\MSASN1.dll
LoadedModule[60]=C:\Windows\system32\dwmapi.dll
LoadedModule[61]=C:\Windows\system32\propsys.dll
LoadedModule[62]=C:\Users\Brian\Adobe ColdFusion Builder 2.0 Configuration\configuration\org.eclipse.osgi\bundles\244\1\.cp\swt-gdip-win32-3738.dll
LoadedModule[63]=C:\Windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601 .17514_none_72d18a4386696c80\gdiplus.dll
LoadedModule[64]=C:\Windows\system32\WindowsCodecs.dll
LoadedModule[65]=C:\Windows\system32\msimg32.dll
LoadedModule[66]=C:\Windows\system32\oleacc.dll
LoadedModule[67]=C:\Windows\system32\explorerframe.dll
LoadedModule[68]=C:\Windows\system32\DUser.dll
LoadedModule[69]=C:\Windows\system32\DUI70.dll
LoadedModule[70]=C:\Windows\system32\RpcRtRemote.dll
LoadedModule[71]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\plugins\com.aptana.ide.core.win32_1.5.0.25222\os\win32\x86\core_1_3_1.dll
LoadedModule[72]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\jre\bin\awt.dll
LoadedModule[73]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\jre\bin\fontmanager.dll
LoadedModule[74]=C:\Windows\system32\ntmarta.dll
LoadedModule[75]=C:\Windows\system32\WLDAP32.dll
LoadedModule[76]=C:\Windows\system32\NetworkExplorer.dll
LoadedModule[77]=C:\Windows\System32\shdocvw.dll
LoadedModule[78]=C:\Windows\system32\slc.dll
LoadedModule[79]=C:\Windows\system32\SETUPAPI.dll
LoadedModule[80]=C:\Windows\system32\CFGMGR32.dll
LoadedModule[81]=C:\Windows\system32\DEVOBJ.dll
LoadedModule[82]=C:\Windows\system32\LINKINFO.dll
LoadedModule[83]=C:\Windows\system32\mlang.dll
LoadedModule[84]=C:\Users\Brian\Adobe ColdFusion Builder 2.0 Configuration\configuration\org.eclipse.osgi\bundles\135\1\.cp\jWinHttp-1.0.0.dll
LoadedModule[85]=C:\Windows\system32\WINHTTP.dll
LoadedModule[86]=C:\Windows\system32\webio.dll
LoadedModule[87]=C:\Windows\system32\dhcpcsvc.DLL
LoadedModule[88]=C:\Windows\system32\dhcpcsvc6.DLL
LoadedModule[89]=C:\Windows\system32\SspiCli.dll
LoadedModule[90]=C:\Windows\system32\credssp.dll
LoadedModule[91]=C:\Windows\System32\ieframe.dll
LoadedModule[92]=C:\Windows\system32\PSAPI.DLL
LoadedModule[93]=C:\Windows\system32\SXS.DLL
LoadedModule[94]=C:\Windows\System32\mshtml.dll
LoadedModule[95]=C:\Windows\System32\Secur32.dll
LoadedModule[96]=C:\Windows\system32\msimtf.dll
LoadedModule[97]=C:\Windows\system32\msls31.dll
LoadedModule[98]=C:\Windows\system32\d2d1.dll
LoadedModule[99]=C:\Windows\system32\DWrite.dll
LoadedModule[100]=C:\Windows\system32\dxgi.dll
LoadedModule[101]=C:\Windows\system32\WINTRUST.dll
LoadedModule[102]=C:\Windows\system32\d3d10_1.dll
LoadedModule[103]=C:\Windows\system32\d3d10_1core.dll
LoadedModule[104]=C:\Windows\system32\D3D10Warp.dll
LoadedModule[105]=C:\Windows\system32\MMDevAPI.DLL
LoadedModule[106]=C:\Windows\system32\wdmaud.drv
LoadedModule[107]=C:\Windows\system32\ksuser.dll
LoadedModule[108]=C:\Windows\system32\AVRT.dll
LoadedModule[109]=C:\Windows\system32\AUDIOSES.DLL
LoadedModule[110]=C:\Windows\system32\msacm32.drv
LoadedModule[111]=C:\Windows\system32\MSACM32.dll
LoadedModule[112]=C:\Windows\system32\midimap.dll
LoadedModule[113]=C:\Windows\system32\RASAPI32.dll
LoadedModule[114]=C:\Windows\system32\rasman.dll
LoadedModule[115]=C:\Windows\system32\rtutils.dll
LoadedModule[116]=C:\Windows\system32\jscript9.dll
LoadedModule[117]=C:\Windows\system32\sensapi.dll
LoadedModule[118]=C:\Windows\system32\d3d10.dll
LoadedModule[119]=C:\Windows\system32\d3d10core.dll
LoadedModule[120]=C:\Windows\system32\DSOUND.dll
LoadedModule[121]=C:\Windows\system32\POWRPROF.dll
LoadedModule[122]=C:\Windows\system32\igdumdx32.dll
LoadedModule[123]=C:\Windows\system32\igdumd32.dll
LoadedModule[124]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\plugins\com.adobe.ide.coldfusion.communityhelp_2.0.1.281393\os\win32\x86\ahclient.dll
LoadedModule[125]=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\plugins\com.adobe.ide.coldfusion.communityhelp_2.0.1.281393\os\win32\x86\HIL_JNILib.dll
LoadedModule[126]=C:\Windows\system32\MPR.dll
LoadedModule[127]=C:\Windows\System32\drprov.dll
LoadedModule[128]=C:\Windows\System32\WINSTA.dll
LoadedModule[129]=C:\Windows\System32\ntlanman.dll
LoadedModule[130]=C:\Windows\System32\davclnt.dll
LoadedModule[131]=C:\Windows\System32\DAVHLPR.dll
LoadedModule[132]=C:\Windows\system32\wkscli.dll
LoadedModule[133]=C:\Windows\system32\cscapi.dll
LoadedModule[134]=C:\Windows\system32\netutils.dll
LoadedModule[135]=C:\Windows\system32\wpdshext.dll
LoadedModule[136]=C:\Windows\system32\PortableDeviceApi.dll
LoadedModule[137]=C:\Windows\system32\audiodev.dll
LoadedModule[138]=C:\Windows\system32\WMVCore.DLL
LoadedModule[139]=C:\Windows\system32\WMASF.DLL
LoadedModule[140]=C:\Windows\system32\EhStorShell.dll
LoadedModule[141]=C:\Windows\system32\EhStorAPI.dll
LoadedModule[142]=C:\Program Files\Microsoft Office\Office12\GrooveShellExtensions.dll
LoadedModule[143]=C:\Program Files\Microsoft Office\Office12\GrooveUtil.DLL
LoadedModule[144]=C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195 _none_d09154e044272b9a\MSVCR80.dll
LoadedModule[145]=C:\Program Files\Microsoft Office\Office12\GrooveNew.DLL
LoadedModule[146]=C:\Windows\WinSxS\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_ none_11ecb0ab9b2caf3c\ATL80.DLL
LoadedModule[147]=C:\Windows\System32\cscui.dll
LoadedModule[148]=C:\Windows\System32\CSCDLL.dll
LoadedModule[149]=C:\Windows\system32\ntshrui.dll
LoadedModule[150]=C:\Windows\system32\srvcli.dll
LoadedModule[151]=C:\Users\Brian\Adobe ColdFusion Builder 2.0 Configuration\configuration\org.eclipse.osgi\bundles\132\1\.cp\os\win32\x86\localfile_1_0 _0.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=CFBuilder.exe
AppPath=C:\Program Files\Adobe\Adobe ColdFusion Builder 2\CFBuilder.exeWow, just found the answer - YzGy posted this link <http://discussions.apple.com/thread.jspa?messageID=7449164�> and I did as instructed and I'm back up and running. For some reason, this recurring event was on my calendar 12,300 times.
-
LabView hangs when trying to load the same VI with a different user logged onto Win2k
When 'User A' is logged onto Win2k, a particular VI loads and runs fine. When 'User B' logs onto the same Win2k box, LabView hangs when trying to load the VI.
I'm also not seeing the setup channels in the Data Neighborhood in MAX when logged on as 'User B'. I tried loading the configuration when logged on as 'User B' that I think is being used for 'User A', but nothing happens.
Where are the configuration files (of whatever type) that tell LabView which user is logged on?
Thank you!There are no configuration files that tells LabVIEW what users are logged on. It is Win2K permissions settings that allow different users access to different folders and applications. Try changing the permissions for the LabVIEW folder and see if that doesn't fix your problem.
-
Macbook (black) first edition hangs when trying to read Serial-ATA
My Macbook recently died on me. In thinking it was my hard disc I have installed a new one. It did find it briefly when trying to install Snow Leopard again this failed since it could not communicate with the hard disc. Now I am stuck, using the System Profiler it just hangs when trying to read the Serial-ATA device tree.
Any idea of what is wrong and if it is worth repairing it?
with kind regards,
ChristianTurns out that the brand new Seagate that I got was faulty. Have now installed yet another drive and this seems to have done the trick.
-
Hello!
We have the following problem:
LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program
We freshly installed LabView 8.2 (2006) and NI-DAQ 7.4.4 on a PC running Windows XP (Service Pack 3). We built a larger vi that remotely controls a traditional NI-DAQ card (AT-AO-10) on a second PC via NI-VISA 5.0.3. We were successfully running this program until a power failure caused the first computer to crash. After this crash we were unable to start the program again: LabView freezes while loading the vi. LabView itself can be started but freezes when adding I/O operations from the NI-DAQ palette to a block diagram.
We have tried to re-install NI-DAQ 7.4.4, but it did not help. We then re-installed all NI software, but still no improvement. In the end we decided to reinstall ALL software, first Windows XP, then LabView and finally NI-DAQ 7.4.4. This worked. However, after a few days of running the program we had to abort LabView via Windows Task manager and afterward we again experienced the same problem as before: LabView freezes when loading the program.
Obviously, we cannot afford to reinstall Windows every time. Are there any known Windows XP / NI-DAQ issues that might cause the freezing of LabView? We would be very grateful for any idea.
Best regards,
MatthiasHello Sprice,
Browse the shipping examples according to “Directory Structure” and then select
DAQ to find the Traditional DAQ examples.
There a lot of examples that are written for counters (Counter >>
daq-stc.llb >> Count Edges (DAQ-STC).vi).
What kind of signals are your photons creating? Are they TTL compatible at a certain
frequency? You don’t care about overwriting
your buffer?
Respectfully,
Rob F
Test Engineer
Condition Measurements
National Instruments -
Have been using the Vibe X2 since 2 months. Phone keeps hanging when trying to pullup the contacts or when opening the SMS function. Terribly dissatisfied with the functioning.
*Moderator note:Message edited for a better understanding of the problem/ compliance with the Lenovo Community Participation RulesSolved, I found the option there:
Contacts - local menu - More features and settings - More display options - Matching digits of number - 7 digits
Works great now,
Regards, -
Dreamweaver CS6 hangs when trying to access SFTP site (Mac)
Dreamweaver CS6 hangs when trying to access an SFTP site - or at least I think that SFTP could be the reason.
Beachball forever....
It works fine when trying to access other sites.
The one addity is that when I go into "Manage Sites" and test it, it connects fine.
I am running OSX 10.8.2. I upgraded from 10.7 to see if this problem would go away.
Message was edited by: deeed (typo)When CS6 first released, some people experienced problems with the FTP feature. A critical update was released which addressed these issues. Did you install it?
http://www.adobe.com/support/dreamweaver/downloads_updaters.html
Nancy O. -
I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.
At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect. -
Aperture 3.5.1 on OS X 10.9.2 hangs when trying to update the backup
Aperture 3.5.1 on OS X 10.9.2 hangs when trying to update the backup. I get the rotating beach ball cursor for hours but not get the confirmation dialog known from 3.4.2 aksing whether I really want to back up.
On old Mac Mini with OS X 10.6.8 and Aperture 3.4.2 there was no such issue.Creating a new vault and populating it always works but then turning around and updating that vault hangs? The drive is formatted OS X Extended, correct?
That is strange. Before abandoning vaults, they should and do work in 3.5.1, I'd try this
Run a library repair on the library. I always do this now as it seems to cut down and hangs when updating a vault.
Before starting the vault update open the Aperture activity window Aperture->Window->Show Activity.
Now do the update. I can't give you anything specific to look for, just try to get an idea of where the hang is happening (if it happens after the repair).
As for rsync, it should work OK but keep in mind as a lot of the data now in 3.5 is in database files any change to Aperture will result in reync seeing a lot of files has having been changed so I'm not sure now much of a savings that will be over just copying the library. To be honest I've never tried rsync on an Aperture library so this may not be an issue but something to keep in mind. BTW do you have much rsync experience? It can be a bit of a bear to setup if you're not familiar with it.
Another option is to look at one of the cloning programs Carbon Copy Cloner or SuperDuper. They have the ability to make clones and then update only the changes since the last clone operation. In reality, I believe one or both actually use rsyn as the backend but give you a much nicer way to set it up and schedule it. -
Acrobat X Pro v 10.1.10 (Mac OS 10.9.3) hangs when trying to save some PDF files, after opening or after commenting. Applies for any of the Save options. "Watch" then "spinning beach ball" appear and application is indicated as "not responding." Mac OS Preview has no problem with the same files. Files can be displayed with Acrobat, just not saved. I would prefer to use Acrobat's commenting tools to mark up the document.
"Mac Office 2008"? You must mean Microsoft Office 2008. Try posting in the Microsoft forums here:
http://www.officeformac.com/productforums/ -
For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help
Right-click (Mac Cmd-click) on another panel header such as "Tone Curve". Make sure there is a checkmark for Basic as was all other panel sections that you want displayed.
-
Error Message received when trying to edit page
I have received this following message when trying to edit a site page in SharePoint or in SharePoint designer. I haven't ever seen this error message before and am not really sure what the issue is. I am not the owner of this
particular site but merely an owner of a specific page on this site so I am limited in my ability to troubleshoot but the actual owner is stuck on what the potential issue is and how to resolve this. I manage and own three seperate sites myself and have never
seen this issue so I am trying to assist in any way I can. Any ideas whats the issue?
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(),response filters, HttpModules,
or server trace is enabled.
Details: Error parsing near '
<!DOCTYPE html PUB'.Hi,
We need more information of the issue page. As suggested by Mokhtar, you could check if the issue is related to permission.
The issue might also occurs to the page which is developed based Ajax registration. Then it might be caused by AAM configuration.
And you could also refer to the link below if the issue is related to SSRS:
http://blogs.msdn.com/b/sowmyancs/archive/2012/07/10/ssrs-javascript-error-sharepoint-sql-reporting-services.aspx
Regards,
Rebecca Tu
TechNet Community Support -
After iPhoto update some photos go black when trying to edit them and am unable to edit those photos
After iPhoto update some photos go black when trying to edit them and am unable to edit those photos. How do I fix this as this is the latest update?
If I hold down the Option key while launching iPhoto, I get the option to start a new library. Do I have to import all my thousands of photos into the new library?
In his original post the poster referenced the following. As to the new Library, see the end.
There are several possible causes for the Black Screen issue
1. *Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. *Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. *A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. *A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. *A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*If none of these help*:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD -
Java error when trying to edit file - access denied
We have been running Vibe 3.0 for a couple years with no issues but suddenly users have begun to get java errors when trying to edit a file from Vibe. When a file entry is opened and the "Edit this file" link is clicked, a dialog pops up that says :
Error from command:
java.security.AccessControlException: access denied (java.io.FilePermission <<ALL FILES>> execute)
Has anyone else seen this? Could it be related to some windows security update perhaps? Any ideas how to resolve would be appreciated. This happens with regular users as well as admin.
Vibe is running on SLES 10 with mysql. We are using IIS Windows Authentication.
Thanksdangross,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Maybe you are looking for
-
Blank screen after update to 10.3.1
I have a Z10 which has a totally blank screen now.... not quite sure what is going on as the backlight works, but nothing is coming up on the screen. I have connected it to Link and even tried downgrading the software... but still nothing... I got a
-
IWeb and SEO Tool - best practice?
I have made an iweb website (published to a MobileMe account) and have downloaded iWeb SEO Tool. I have understood that there is one certain procedure in doing SEO that's a lot better than the other. What I usually do after making changes in iWeb is
-
Simple Flash Detector (k)
I need a SIMPLE flash detector for flash 8. I have been using the Dreamweaver behavior method for years. But with Flash 8 it doesn't work. I have downloaded the Flash Detection kit, but am having a hard time making heads or tails of it. Why is this d
-
Apple IPod Silver slim-line.: Lost for many years, found and charged it. Turns on Has picture of IPod on the screen with an unhappy smilie on it. Message says contact Apple.com/Support. On Back designed by Apple California made in (China) I think. 1s
-
Hi everyone, Has anyone made prints with iLife 11? How is the quality? Is there an option to make collage prints? Thanks!