LabVIEW 8.5.1 / Report Generation Toolkit / Office 2k3 & 2k7

Hi
I have just upgraded from LV8.5 to LV8.5.1 and it's toolkits and I don't see the report generation toolkit in my menu.
I would have accommodate myself if the problem was only with menus, but now some of the vis included in the toolkit don't work anymore.
I verified in C:\Program Files\National Instruments\LabVIEW 8.5\vi.lib\addons\_office and everything seem to be installed...
I was wondering if it makes a difference because I have both Office 2k3 and Office 2k7 installed on my machine.
Everything was working well with LV8.5 and both installation of Office.
I have tried to reinstall/repair the report generation toolkit, but nothing change.
Am I the only one with this problem?

It is true for each updater, that it overwrites the NIReport.llb. I just copy the llb into another folder and after updating but before mass compile I copy it back again. This worked for each update (7.1 -> 7.1.1; 8.0 -> 8.0.1; 8.2 -> 8.2.1).
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Similar Messages

LabVIEW 8.6 and report generation toolkit

I was wanting to upgrade to 8.6 but noticed that my rep gen toolkit(1.1.1) is not compatible.
Will NI be offering a free upgrade? or do I have to go to management and ask to purchase rep gen toolkit 1.1.3 for 500 US dollars? Purchasing the same toolkit every few years when you have an SSP for a full development system is getting kind of old.
Brian

Unfortunately there is some delay in us Aussies getting the original DVDs sent to us, so at this stage my NI rep has burned me a copy of the main LabVIEW install but I can't find the Report Toolkit on it.
I am an SSP customer but when I go to the Services Resource Centre I get this message:
Important Message
Access to the Services Resource Center could not be verified.
The email address is not subscribed and/or activated with the appropriate level of service. If this is the incorrect email address, please login here
Please confirm that your correct country information is specified, please select here
If you have just subscribed you may need to wait up to 48 hours for your subscription to be processed
If access is urgent, or to subscribe, please contact a NI Representative at (800) 206-2179. Outside of the US and Canada please contact your local NI branch office

Report Generation Toolkit V9.0.0 : Print Report.vi doesnt print

Hi,
i have migrated my Labview 8.5 Project with Report Generation Toolkit V1.1.2 to a Labview 2009 System with Report Generation Toolkit V9.0.0.
In this Project I use the Report Generation Toolkit for printing out a Standard Report with e few Tables and Graphs.
Now the VI Print Report.vi delivers the Error -41002 with the Text "Invalide Printer Name". I have, of course installed the propper Printer on the machine.
I don´t connect a string to the "Printer name" input of the VI, because i want to use the default printer.
In my oppinion, there´s a bug in the Print Report.vi: if you don´t wire the "Printer name" input, the vi should use the default printer, but in this case the vi connects the empty input string to the input of the method node it calls.
I fixed this bug, but the method node still returns the same error.
any ideas?
Thanks!
Solved!
Go to Solution.

Thank you for the link!
For some reasons i can´t find this specific article in the knowledge base (my browser is always rerouted to the german version of ni.com, because i am in Austria). I tried to search with the exact title of this article, and the error message string, but no results...
I have also installed Labview 8.5 and the "old" Toolkits on my new computer in addition to Labview 2009 and the "new" Toolkits and tested my program in 8.5. Here i got an error mentioning the margins and i had to change the margin settings for printing out, then in worked.
After reading the article, i have applied the same changes for the margins in the 2009-version of my program and it works too!
Problem solved!
Thank you very much!
PS:
I first wrote, that there´s maybe a bug in the new version of the Print Report.vi, but i´ve compared it with the old version and it seems to be no bug, sorry!
After all I decided to stay with Labview 8.5 for now, because of another problem:
it´s not possible to "save for previous version" from LV2009 to LV8.5 directly.
Laview crashes, when a VI contains an event structure as i found out by searching through the "known issues", and i have a lot of VIs with event structures!
I have to have the possibility to save my Labview projects for 8.0 and 8.5. The only way is to save for 8.6 and then save from 8.6 to 8.5.
That´s nasty and time-consuming!
Maybe a future update will solve this problem (without producing new ones)

Report Generation Toolkit Excel Vi's do not run after creating an executable. What am I missing?

I have labview 8.5 and Report Generation Toolkit version 1.1.2. My vi works fine during development. When I make an executable or an installer the excel vi's do not work. I have seen this question posted before but it has always been for earlier revisions and the answers do not seem to apply with 8.5 and 1.1.2.

Hello ajh,
You will have to include Dynamic VIs in the executable you build. The following link has more information:
http://digital.ni.com/public.nsf/allkb/C38CE3F30542D65B86256F0E00740DD8
Prashant.

How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office

I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreet

Hi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi ‏23 KB

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

LabVIEW Report Generation Toolkit for Microsoft Office

Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
Stefan

Hi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel

How do I put data into a template using the Labview report generation toolkit for Microsoft Office?

I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason Phillips

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

National Instruments releases LabVIEW Report Generation Toolkit for Microsoft Office.

The new LabVIEW Report Generation Toolkit for Microsoft Office is a library of flexible, easy-to-use tools for programmatically creating and editing Microsoft Word and Excel reports from LabVIEW. Whether you need to generate reports summarizing manufacturing test results or compile process statistics to improve your production yields, this toolkit speeds your development of customized, professional reports.
To see examples of this toolkit or get more information please visit :
http://www.ni.com/labview/report_gen_toolkit.htm

It is a bit limiting though. I built my own set of VI's, a toolkit if you will, that does some of what this tookit does. But, I also wrote some functionality that isn't available in NI's kit, such as creating charts as separate worksheets and linking the charts to data on another worksheet. All in all, the toolkit is great, but you can't get as much out of it as you can using the ActiveX calls yourself.

LabView database connectivity toolkit 1.0.1 compatibility with MS-ACCESS 2010 / Labview report generation toolkit for Office 1.1.3 compatibility with Office 2010

In the very near future we will be forced to upgrade to Office 2010 Company wide and I am a little concerned with some of our older test platforms that have applications built in LabView 8.2.1. These applications save data to MS-ACCESS 2000 databases using the LabView database connectivity toolkit 1.0.1. Office 2003 is also loaded on these test platforms with all test reports generated using the LabView report generation toolkit for Office 1.1.3.
I have not gotten my hands on a copy of Office 2010 yet to see if there will be any compatibility issues. Does anyone have any experience in this area?

The MS-Access part is fairly well isolated through the ADO interface LabVIEW uses. The only possible problems there IMHO are difficulties with possible Acess compatibilities itself such as an example, SQL statement you may have invoked directly through the ADO interface. Maybe you did use a depreciated command back then that has since been removed. As long as the only thing you do are simple INSERT and SELECT statements only, I would expect it to just keep working.
The Report Generation interface is a different beast. Microsoft manages to change the Automation interface with every version of office in a way that strongly binding applications like LabVIEW break on. There is no good way around that except not changing those methods, but that is a cause that has been lost already. You will certainly have to verify the version dependant Report Generation API VIs to still work with Office 2010 and most likely you will have to make some changes to those VIs to make them work again with the modified ActiveX interface of Office 2010. Note, that I have no experience with porting report generation to Office 2010 but I have had some headaches from porting that between Office 97, 2000, 2003, and 2007.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

LabVIEW Report Generation Toolkit for Microsoft Office 1.1.2

Where is possible to buy LabVIEW Report Generation Toolkit for Microsoft Office v1.1.2?
Thanks.
Francisco

You are right, the page does not say that but the local distributor says that I have to purchase an update to the latest version of LabView: about USD 1000. I can't believe that.

Report Generation Toolkit Compatibility with Microsoft Office 2013 and LabVIEW 2012

Hello community,
on this page there is shown the Report Generation Toolkit Compatibility with Microsoft Office and LabVIEW.
In our company we use actually LabView 2012 and it works perfectly with MS Office 2010.
Has anyone ever tried the "Report Generation Toolkit" of LabVIEW 2012 with MS Office 2013? Does it really not work? Has anyone an emirical value for this topic?

Hi digital_badger,
as you sure have seen in the link it is not officially supported by NI, which means to you one of the following things:
1. You could upgrade your LabVIEW and your Report Gerneration Toolkit to Version 2014 and use MS Office 2013
2. You could just try it with MS Office 2013 which might work but if it's not working you don't get any support from NI.
Even if someone tried it already and it worked for him does not mean that it will work on your machines. It is possible that on some of your machines it could work but not on others. Their can be a lot of problems while playing around with unsupported setups.
3. You could leave your setup as it is and stick to your MS Office 2010.
I hope I could give you a good answer to your question

엑셀파일을 핸들링하기 위해서는 관련 툴킷(Microsoft Office용 NI LabVIEW Report Generation Toolkit)이 필요한가요?

안녕하십니까? 대전 이엘케이(주)의 박창규입니다.
현재 Labview를 사용해서 엑셀데이터를 리딩 => 데이터 분석 및 요약, 그래프 삽입, 기타 => 원하는 template로 저장
하는 프로그램을 작성하려고 하고 있습니다.
이렇게 프로그램하기 위해서는 전용 툴킷(Microsoft Office용 NI LabVIEW Report Generation Toolkit)이 필요한 건가요?
현재 30일 평가버전인 2011버전을 사용하고 있습니다.
관련한 예제 나 설명자료등이 있으시면 도움도 함께 부탁 드립니다.
감사합니다.
박창규 드림.

Error involving Report Generation Toolkit and Labview Run Time Engine

Developed an application using LabVIEW 6.1 and LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1. From there, tried to build a shared application for use with the LabVIEW Run Time Engine. The Run Time version functions properly until "New Report.vi" is called and then an error is generated, code 7, calling out "Open VI Reference in New Report.vi" could not be found. When building the application, I did include the "NI Reports Support" in the advanced installer options. The machine used for original development and application build is running Windows XP Pro and Office XP. Any suggestions??

I am having the exact same problem but with LV 6.1 and M/S WORD 2000. It appears that the "New Report.vi" is trying to open "C:\APP.DIR\Word_Open.vi" and "C:\APP.Dir\Word_Open_Document.vi" by reference. The "OFFICE 2000.TXT" says that "_exclsub.llb and _wordsub.llb must be added as support files when building an application or a dynamic link library with the application builder." I added them as Support Files and I copied them to the "C:\TESTER\" where the TESTER.EXE is and I still get ERROR 7 in "NEW REPORT.VI" at VI OPEN REFERENCE.
Do I need to make a "C:\TESTER\DATA\" sub-dir and put the support files there?
I am building on MY COMPUTER on F: Drive on a network and transporting files to the real Tester.
I displayed my App.Property of APP.DI
R at start up and it is C:\TESTER\ ! How would my application know that "Word_Open.vi" and "Word_Open_Document.vi" are actually inside the _wordsub.llb?
Any ideas ?
Greg Klocek

Report Generation Toolkit on Vista and Office 2007

Hi,
I am trying to install Report Generation Toolkit 1.1.2 on LabVIEW 8.5 on a computer with Vista Business and Microsoft Office 2007.
The installation is starting, but I am receiving a message saying that "Microsoft Office 2000 or later is not detected on the computer"
The installation stops and the toolkit is not installed.
What can I do ?
Tom

Tom SAVU wrote:
Hi,
I am trying to install Report Generation Toolkit 1.1.2 on LabVIEW 8.5 on a computer with Vista Business and Microsoft Office 2007.
The installation is starting, but I am receiving a message saying that "Microsoft Office 2000 or later is not detected on the computer"
The installation stops and the toolkit is not installed.
What can I do ?
Tom
The Report Generation Toolkit does probably not support Office 2007 yet. This is because the Office ActiveX interface used to change with each version and the Report Generation Toolkit comes with specific libraries for each of the Office versions it supports. With the wrong office version the Report Generation Toolkit VIs are normally broken and can't run without some more or less involved modifications.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

LabVIEW 8.5.1 / Report Generation Toolkit / Office 2k3 & 2k7

Similar Messages

Maybe you are looking for