Labview 8.5 and dotNet 2.0 : Unable to load assemblies ...
Hi,
We are trying to upgrade a labview application written with 8.0/8.2 version to Labview 8.5.
Our application creates dotNet 2.0 objects and call dotNet methods.
Our program works fine in Labview 8.0/8.2 but with Labview 8.5 the Vi's are "Brocken". There is an error
on the constructor node. When we try to re-create the dotNet constructor, Labview is unable to load our dotNet 2.0 assembly.
We have mave the same test with microsoft dotnet standard assemblies ( system.windows.forms ), and it works fine !
Do you have some informations about this kind of errors ???
Thank you for help
Hello Eler,
I'm the AE from the french support who tested your class.
I tested your big class with different version of LabVIEW and with all the versions, I had the error.
I tested with LV8.5.1 french, LV 8.2.1 french and english, LV8.2 french and english,LV7.1 fench.
For me with LV 8.2.0 english version your class doesn't work.
I attached screen shots for all tests.
Regards
VéroniqueD
NI France
Attachments:
error assembly.zip 382 KB
Similar Messages
-
JSP, JavaBeans and iPlanet 4.1- Unable to load JavaBean
I get the following error when trying to access a JavaBean from a JSP page. I have tried just about everything including using the <@page import /> in the JSP page.
I can get it to run perfectly in Tomcat 3.2 but it must run in iPlanet 4.1. I think the solution should be fairly simple I just can't find it.
Any help would be greatly appreciated.
Thanks.
The exception is as follows (thrown on running the generatePage.jsp linked from index.jsp).
[29/Nov/2001:16:50:23] info ( 1364): Internal Info: loading servlet /TechCom/generatePage.jsp
[29/Nov/2001:16:50:23] info ( 1364): JSP: JSP1x compiler threw exception
org.apache.jasper.JasperException: Unable to load class JspPageLoader
at org.apache.jasper.compiler.BeanRepository.getBeanType(BeanRepository.java:183)
at org.apache.jasper.compiler.GetPropertyGenerator.generate(GetPropertyGenerator.java:97)
at org.apache.jasper.compiler.JspParseEventListener$GeneratorWrapper.generate(JspParseEventListener.java:728)
at org.apache.jasper.compiler.JspParseEventListener.generateAll(JspParseEventListener.java:190)
at org.apache.jasper.compiler.JspParseEventListener.endPageProcessing(JspParseEventListener.java:159)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:141)
at com.netscape.server.http.servlet.NSServletEntity.load(NSServletEntity.java:214)
at com.netscape.server.http.servlet.NSServletEntity.(NSServletEntity.java:104)
at com.netscape.server.http.servlet.NSServletRunner.loadServlet(NSServletRunner.java:607)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:357)
[29/Nov/2001:16:50:23] warning ( 1364): Unable to locate class: D:\Netscape\Server4\docs\TechCom (java.lang.ClassNotFoundException: D:\Netscape\Server4\docs\TechCom)
[29/Nov/2001:16:50:23] warning ( 1364): Internal error: Failed to load servlet (servlet=/TechCom/generatePage.jsp)To solve this problem you have to:
include <@page import /> tags importing the JavaBean to be used.
In the classpath of iPlanet include the directory in which your JavaBeans are placed.
Also in the classpath of iPlanet include the root directory of you web site containing the JSP's. this should then solve the problem. -
We had power outage and now I am unable to load apple TV . The screen states unable to load contents try agin later. Any suggestions?
Hi there,
Do you have icloud account? You need firstly turn off find my iphone (by go to icloud.com -->sign in --> go to "Find my iphone" and erase your iphone in it). And then you restore your iphone with DFU mode.
When you erase your Find my iphone and if you can not restore, your iphone has a problem with hardware.
Some infos can help you.
Kind regards, -
Unable to load Oracle.DataAccess
Hi ,
I have created a website project on .net framework 4.0 in Visual Studio 2010 . But I am unable to add reference the Oracle.DataAccess dll. It is continously throwing the error " unable to load assembly Oracle.DataAccess . The system cannot find the file specified. "
But when I tried adding the reference in a web application project , it gets added. But when run the project it is throwing the same error. On the web page the error thrown is this :
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess' could not be loaded.
=== Pre-bind state information ===
LOG: User =***********
LOG: DisplayName = Oracle.DataAccess
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: Oracle.DataAccess | Domain ID: 2
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
Any help on this , please.. I have been trying all sorts of things and nothing seems to workl.BadImageFormatException occurs when you have a bit mismatch.
1) What is the TargetCPU set to when you compiled?
2) Are you running the app on 32 bit or 64 bit OS?
3) Confirm whether the app is running as 32 bit or 64 bit in the problem environment (open task manager, click the process tab, is there a *32 next to the name?)
4) Did you install 32 bit Oracle client or 64 bit Oracle client?
Cheers,
Greg -
Unable to load data / NullReferenceException only on certain tables when deployed
I have a LightSwitch app that works fine when being debugged locally. But it has a strange issue when deployed as a Cloud Service to Azure. I have two Silverlight grid controls on the page which display a red x and give the error, "Unable to load data.
Please check your network connection and try loading again."
Several other queries are running on this page and correctly pull data from other tables in the database. The queries that run correctly are tied to label or text box controls.
The queries that fail, return an HTTP Status code 500 (Internal error). If I try and pass the query to a constructor as an IVisualCollection,
and I wrap the call in a Try block,
the Inner Exception is "Object reference not set to an instance of an object." So, a Null Reference Exception. Checking for null before the constructor call and popping up a message box if the query was null as a means of debugging yielded nothing. I
create these helpers all over. Only two are causing an issue and only when deployed. In addition, running the query in the Management Portal also completes fine.
Try
'Check for nulls
If (Me.qQuoteByFirm Is Nothing) Then
Me.ShowMessageBox("qQuoteByFirm", "Error", MessageBoxOption.Ok)
End If
If (Me.qQuoteByFirm.Screen Is Nothing) Then
Me.ShowMessageBox("Screen", "Error", MessageBoxOption.Ok)
End If
If (New ModalWindowHelper(Me.qQuoteByFirm, "mwAddQuote", "Quote") Is Nothing) Then
Me.ShowMessageBox("Modal", "Error", MessageBoxOption.Ok)
End If
'Create helper
Me.HelperAddQuote = New ModalWindowHelper(Me.qQuoteByFirm, "mwAddQuote", "Quote")
Catch ex As Exception
Dim err As String = ""
For Each item In ex.Data
err = err & item.ToString()
Next
err = err & ex.InnerException.ToString() & vbCrLf & _
ex.Message.ToString() & vbCrLf & _
ex.StackTrace
Me.ShowMessageBox(err, "Error", MessageBoxOption.Ok)
End Try
'Constructor
Public Sub New(ByVal visualCollection As IVisualCollection, _
ByVal dialogName As String, _
Optional entityName As String = "")
_collection = visualCollection
_dialogName = dialogName
_entityName = If(entityName <> "", entityName, _collection.Details.GetModel.ElementType.Name)
_screen = _collection.Screen
End Sub
The actual construction of the queries does not seem to matter. I've tried several variations along with requesting the entire table. Same result. However, this only occurs on two specific tables. Grid controls displaying other tables on other screens work
properly.
Here's the weird part. If I comment out the call to the constructor, I can gain access to the gird control and add data to it even through the red box remains. If I refresh the grid control, the data disappears as if it wasn't saved or isn't there. But inspecting
the table in SQL Azure Management Portal shows that the data was properly populated in the table.
The app and the database are clearly connected and able to communicate fine. So why when reading from these two tables (but not writing to) are my grid controls throwing exceptions? Why does this only happen when deployed? What other techniques can I use to
get more information?I am not very familiar with Lightswtich. But 500 is a server side error. Do you manually code the server side, or does Lightswitch automatically generates the server side code? If you manually coded, then please try to catch exceptions in
your server side code. If the code is automatically generated, you may want to consult a Lightswitch forum on how to troubleshooting such issues. What's more, when you refresh the grid, what code are invoked? Try to check that piece of code and see if there're
any problems, such as you reload the grid with empty data. -
Itunes unable to load data class information from Sync Services
Hi
I have an I Phone 4 , after upgradation to IOS 7.0.1 i tried to connect my phone to itunes, i showed that i need to upgrade my Itunes to version 11. I did the same even after both upgrading the phone and Itunes. Itunes is unable to detect my phone and continuously shows :Itunes unable to load data class information from Sync Services.
After this i upgraded my phone to IOS 7.0.2 still the problem persist. I have logged in as an administrator also , have uninstaaled itunes and have again installed it. Have even tried to change prferences and have reset the sync history, still Itunes is unable to detect my phone and sync it and comes up again and again with the same message :
Itunes unable to load data class information from Sync Services. I have a windows 7 PC.Doublechecking. In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert -
"Unable to load network list" on new sim card overseas on unlocked iphone 4
I recently bought an Iphone4 (unlocked) from australia. While traveling overseas I inserted a new sim and got the message "unable to load network list", and could not activate my new sim card. Could not find the answer on the discussion board here but got in touch with my provider back in oz who helped me.
Solution: You need your laptop with Itunes on it. Turn the phone off, then connect to your laptop with Itunes already running and then turn the phone on. When you click on your phone icon in Itunes it will say "Congratulation, your iphone is unlocked". You can then eject your phone and your new sim is activated.
Hope this helpsSorry not sure why your new sim card isn't supported...not sure if it helps but I had my laptop connected to wifi at the time also, but I don't think it should matter. Its worth a try connecting to internet with ITunes on, connect your phone and then turn it on and see what happens.
-
ITunes was unable to load data class
I just bought my first iPhone today and when I get home and connect it to my computer iTunes opens up but it takes forever to load (thought it froze) then after 5mins it finally loads and says "iTunes was unable to load data class information from Sync Services", I've restarted multiple times have tried different usb ports, then I connected my brothers 8gb iPod nano and it works just fine.. Im using the latest iTunes out (8.0.2)
You have not mentioned if you tried removing and reinstalling iTunes.
This article will give you the steps for removing iTunes.
http://support.apple.com/kb/HT1925
Download and install iTunes again and see if you get the same error. -
ITunes was unable to load data class.. iPhone3g
I just bought my first iPhone today and when I get home and connect it to my computer iTunes opens up but it takes forever to load (thought it froze) then after 5mins it finally loads and says "iTunes was unable to load data class information from Sync Services", I've restarted multiple times have tried different usb ports, then I connected my brothers 8gb iPod nano and it works just fine.. Im using the latest iTunes out (8.0.2)
John L316 wrote:
Does anyone know what is causing this
see if this support article helps:
iTunes 10.2: "iTunes was unable to load data class information from Sync Services" alert after installing Xcode 4. -
From today's morning , We are having Issue on Our Online SharePoint Site.
Each WebPart is not loading and displaying this Line
Unable to load type Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException required for deserialization.
Please write in quick response to fix it at
[email protected]Hi,
According to your post, my understanding is that SharePoint Online Site was unable to load web part and got the “Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException” error.
Per my knowledge, the SPUpgradeCompatibilityException occurs during upgrade when the front-end Web server attempts to connect to an incompatible database.
Please check whether the database is compatible.
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Unable to load mapping - Integration Repository
Hi,
I created a Message Mapping and saved it, then when I close it and try to open it again I can't see it and this message appears:
"Unable to load mapping"
Any ideas why? I'm on XI 3.0 SP17Hi,
Problems may be because of some java patches.
Is this error is repeatable/reproducable in the different namespace/SWCV. Check this
Have a look into this -
Unable to load mapping
hope this helps
Regards,
moorthy -
Powerbook G4 unable to load from Airport Extreme...
Hello: I have been wanting to go wireless at home and finally purchased a new Airport Extreme base station at the newly opened Apple store in San Luis Obispo. The unit is connected to Earthlink DSL and is working when connected to the LAN ports. However, my 12 inch Powerbook indicates it is receiving the signal, but fails to load internet pages. The light is green on the Airport Extreme and dashboard reads, just unable to load any internet pages. I know that the 12 inch Powerbook works on wireless because it has been flawless. Is it possible that Earthlink DSL doesn't work with Airport Extreme since it is not the new base station or the G4 Powerbook? Could it be the older G4 PowerMac that the Airport Extreme is connected?
Triple Thanks,
PowerMac G4, Powerbook G4 Mac OS X (10.4.10)Hello OpticalArtisan. Welcome to the Apple Discussions!
Is your current network configuration, with the 802.11n AirPort Extreme Base Station (AEBSn), something like the following...
DSL modem > (Ethernet cable) > [WAN port] AEBSn > (wireless) > wireless devices?
If so, can you get Internet access with any of your Macs connected to any of the AEBSn's LAN ports? -
ITunes says iTunes was unable to load data sync services.
I am unable to sync my new iPhone 5 to iTunes. When I plug it in an error pops up and says iTunes was unable to load data sync services.
Hey tbestsr,
Welcome to the Apple Support Communities. I found an article based on the alert that you cannot load the data sync service. In this article it will give troubleshooting steps to help resolve it.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Regards,
-Norm G. -
Mac- 'unable to load metafile'
trying to download/install flash player on our mac* and it keeps giving 'unable to load metafile' error; tried uninstalling flash/re-installing and no luck. Found a helpful-looking topic on here with links to solutions, but the links no longer work.
thanks in advance for your help!
Graphic Ink Art Dept
*our Mac- OS X 10.9.5Try the offline installer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg -
"unable to load labview project" in Deployment Machine
Hi all,
well the Deployment Target works fine on Development machine
But has problem Loading on the Deployment System "unable to load labview project"
has anyone had similar issues and ound a soln.
NI Support has not responded yet to the solution.
Attachments:
unabletoload.PNG 17 KBHi aparab,
I think I will need more information to solve this issue.
You told "NI Support has not responded yet to the solution." Do you already have a service request number of the NI support?
Can you post your project? Which RT-target do you use? Which hardware?
You can also post a MAX report of you windows computer and one of your target:
1. Start -> Programs -> NI MAX
2. File -> create protocol -> choose technical support and my system (development computer) -> next -> next -> choose path -> next -> finish.
3. File -> create protocol -> choose technical support and your RT-target (real-time system) -> next -> next -> choose path -> next -> finish.
Best regards
Suse
Certified LabVIEW Developer (CLD)
Maybe you are looking for
-
IBooks not displaying pictures, why?
I bought a book in iBooks. It's a book made for iBooks, but the pictures are not being displayed. What's wrong? I've already erased the book and downloaded it again, no success. Don't know what to do.
-
Messages are being deleted automatically
We have been using TB successfully on Windows 7 for a couple of years having previously used Outlook. My wife's incoming e-mail messages are being deleted after one month. They are also deleted from Webmail. The ISP says that they have not been delet
-
Crystal Reports XI Release 2, ActiveX Resizing
Does anyone know the methods to resize the activex control dynamically when a window resizes. When using Visual studio it will automatically resize with the window, however we are not using .NET. There must be some methods to resize the control but I
-
I have photoshop elements 10 and I cant add text
ok so I have elements 10 and Im trying to add my text it was just working on one picture I went to edit another picture and now my text wont show up it says its there in the layer window but I cant see it at all can someone help me?
-
I Have an iPad 2. Since download of iOS 8.1.2 every time I use the browser--usually Google --this message comes up "a problem occurred with this webpage so it was reloaded". Touchpad also seems slow and jerky.