[Labview 8.5] Centrer les curseurs dynamiquement

Bonjour,
J'aimerais savoir s'il est possible de centrer des curseurs sur un graphe XY de façon dynamique?
J'ai chercher avec les noeuds de propriétés mais je n'ai rien trouvé! Merci d'avance pour votre réponse.
Cordialement.
S.

Bonjour,
Pourtant il y a bien des propriétés...
Cordialement,
Micaël DA SILVA

Similar Messages

Comment enregistrer dans un fichier des photos prise via labview en vu de les utiliser pour un traitement d'images

bonjour !
je dois effectuer l'acquisition d'image via une camera et gérer le traitement d'image via labview.
j'ai déja créé les VI pour acquerir et traiter les images,mais seulement je n'arrive pas à enregristrer l'image acquise dans un fichier , pour pouvoir y retourner le rechercher lors du traitement d'image .
merci.

Labview standard a des fonctions pour sauver des images en différents formats dans la palette ''Graphics and Sounds''/ ''Graphics Formats'' (désolé j'ai la version anglaise). Il y a des fonctions additionnelles dans l'outil en supplément ''Vision Development''.
Il y a aussi un forum francophone. C'est probablement un meilleur endroit pour poser une question en français.
bonne chance
Marc Dubois
HaroTek LLC
www.harotek.com

Afficher les curseurs sur un graphe déroulant empiler

Bonjour,
Comment faire pour visualiser les coordonnées XY a partir d'un graphe déroulant dont les courbes sont empilées?
Remarque : sur un graphe déroulant avec des courbes empilées, il semble impossible d'avoir des curseur par contre sur un graphe, on peut avoir des curseurs mais pas empiler les courbes.

Bonjour,
Je t'envoie une solution alternative dans laquelle j'affiche les courbes dans deux graphes différents et je lie par programmation les coordonnées des curseurs de chaque grahe.
J'ai également trouvé un exemple qui montre comment enregistrer l''image d'un graphe.
En t'inspirant de ces deux exemples, tu devrais pouvoir réussir à obtenir ce que tu veux.
Johan G.
NIF
.NIDays2008 {font-family:Arial, Helvetica, sans-serif; font-size:12px; color: #065fa3; font-weight: bold; text-decoration: none; text-align: right;} .NIDays2008 a, a:hover {text-decoration: none;} .NIDays2008 a img {height: 0; width: 0; border-width: 0;} .NIDays2008 a:hover img {position: absolute; height: 90px; width: 728px; margin-left: -728px; margin-top:-12px;}
>> Avez-vous entendu parler de NI Days ?
Attachments:
Programmatically_Saving_Your_Waveform_Graph_with_Image_and_Color_Options.vi ‏72 KB
Curseur.vi ‏25 KB

Positions des curseurs dans un graphe

Bonjour,
comment peut on récupérer les indications de position des curseurs dans un graphe?
L'objectif est, quand on a 2 (ou +) curseurs dans un graphe, de faire calculer par labview le delta x et le delta y sur les curseurs.
Merci d'avance
Résolu !
Accéder à la solution.

Merci Kaleck0,
eloi76, merci de mettre ce post en résolu si la réponse vous convient.
Merci
Paolo_P
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France

Comment sur chaque pts d'un graphe superposer un curseur

Je souhaite selectionner les pts d'un graphe en fontion des choix des utilisateurs.Pour cela j'ai mis un curseur de couleur sur les pts du graphe et la sélection consiste à valider avec La proproiété Curseur Visible le curseur a partir d'un noeud de propriétés reférencé au graphe.
Mon pb est d'ajouter ces curseurs sur le graphe (qui change) car dans mes éssais j'ai mis "manuellement" les curseurs sur le graphe
Comment écrire, certainement à partir d'un noeud de propriétés du graphe, un curseur de couleur Rouge( par ex) sur chaque pts du graphe?.
Merci d'avance.

Utilise la propriété "Cursor List" (ou l'équivalent français). C'est un array de propriétés de tous les curseurs. Le nombre d'éléments dans l'array détermine le nombre de curseurs que tu auras.
LabVIEW, C'est LabVIEW

Rapport et Message Pass / Fail de Teststand avec LabVIEW 8.0.

Bonjour,
J'ai deux problèmes avec l'OI Teststand avec LabVIEW. J'ai modifié l'exemple présent de l'OI Teststand pour le piloté comme sous VI avec LabVIEW 8.0. Les problèmes étant que je n'arrive pas à afficher le rapport en dynamique pendant que les séquences sont lancées et dans le même les messages popup Pass ou Fail en fin de séquence ne s'affiche pas.
Merci,
Résolu !
Accéder à la solution.

Voici quelques commentaires et questions car tout n'est pas clair:
-dans le VI TS OI: LoginOnStart est à False, par contre je ne vois pas d'appel à la front end callback loginlogout (du coup tu n'es pas logé sauf si j'ai raté quelque chose)
-Il y a des indicateurs (containeurs activeX entre autre) qui semble être invisibles (propriétés?)
-Le code gagnerait à être plus ordonné (il y a déjà les commentaires sa c'est bien)
-il y a un start de l'application manager, mais ou est le start de la séquence? normalement c'est un appuye sur un entry point qui le gère (testUUT par exemple)
-Il y a une méthode open sequence file, mais la reference du sequence file n'est pas utilisée...(c'est après qu'il faut faire une méthode pour lancer la séquence)
-la méthode Run sur le sequence file view manager sert à quoi?
-pas mal de fonctions mériteraient un sous VI
-Les fichiers séquences ne sont pas fournis donc je ne peux pas donner d'indications, par contre dans le VI les chemins pour appeler les séquences sont en dur, donc il y aura des problèmes pour exporter le projet sur une autre station.
J'espère que sa pourra t'aider, et je reste disponible pour d'autres infos.
Rodéric L
Certified LabVIEW Architect

What is the best way to connect PumpWorks to Labview? DDE or OPC

What is the best way to connect quizix PumpWorks to labview?
PumpWorks share data using Dynamic Data Exchange (DDE),what is the best way? To use an OPC Server betwen labveiw and pumpworks or DDE?
Solved!
Go to Solution.

Hi.
If the instrumet can communicate with an OPC server I think both methods are fairly equal.
There is a chance that you might have to reinstall LabVIEW without OPC server if you choose DDE, as it is known that it might conflict with the DDE server.
http://zone.ni.com/devzone/cda/tut/p/id/4531
http://zone.ni.com/devzone/cda/tut/p/id/7450
-Tom

I want to test my microphone using labview vi

Hello SIr,
I want to check my microphone using labview program, using labview vi i want to get dynamic vibrations of sound when we will give input to our head phone(In this we are having our microphone). From this while on speaking using our head phone, its possible for me to get the frequency of my sound.I m having labview 5.1 version. If you have any simple code for this problem, Please send me.
Kindly regards
Shridhar

Hi mpshridhar,
Yes, LabVIEW 5.1 is too old a release, so I'm in a fix too. However in LabVIEW 8.6 (and other newer versions) there's an Express VI that will help you acquire signals from your microphone.
Here's an image of the VI and the pop-up that will help you acquire the signal.
Regards,
Vaibhav.
Attachments:
sound example.jpg ‏49 KB

Systems Engineer(LabVIEW)

Excellent opportunity for Systems Engineer(LabVIEW)
Locationheffield
Salary:£30 to £37k per annum
Austin Consultants are a National Instruments Alliance Partner and have been the UKs highest certified LabVIEW Consultants for three of the last four years. We are an elite team of LabVIEW Engineering professionals and software programmers working across multiple industries with a passion for problem solving and being at the forefront of technology.
We are currently looking for a LabVIEW Systems Engineer to join our dynamic and expanding team in our northern office based in the heart of Sheffield . As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architectures primarily in the LabVIEW Programming Language and on the National Instruments Hardware Platforms.
Key Skills
Qualifications & Requirements:
◦ Minimum of 3 continuous year’s practical experience in instrumentation & control, industrial automation and ATE is required.
◦ Minimum 2.1 honours degree in engineering or science related field,
◦ Minimum of LabVIEW qualification of Certified LabVIEW Developer or equivalent.
◦ Firm knowledge and experience of National Instruments embedded systems, including LabVIEW FPGA and LabVIEW Real Time.
◦ Understanding and practical experience of object oriented principles.
◦ Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI,
◦ Practical electrical debug experience.
◦ Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦ Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦ Must be able to handle multiple tasks and enjoy working with people.
◦ Strong problem solving skills
◦ Excellent communication skill
◦ A proactive/can do attitude
◦ Legal right to live and work in the UK. Sponsorship is not available.
◦ Must hold a full clean and valid UK driving license and be flexible to travel throughout UK.
Key Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦ Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦ Developing intuitive GUIs.
◦ Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦ Providing timely, accurate and effective solutions to technical problems.
◦ Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦ Working with the business development team to develop proof of concepts for customers.
◦ Must be available and happy to travel and work on customer sites around the UK.
Kindly send us your updated CV or call us for confidential chat regarding the opportunity.
Mathi Narayanaswamy
Resource Consultant
(LabVIEW, TestStand, VeriStand, VISION and other NI technologies)
Austin Resourcing (Division of Austin Consultants, National instruments Silver Alliance Partner)
Studio 41, Clink Street Studios
Clink Street
London
SE1 9DG
Tel: 0800 772 0795
Mobile: 07809344621
Email:[email protected]
www.austinresourcing.co.uk
LinkedIn: uk.linkedin.com/in/austinresourcing
Twitter: www.twitter.com/austinrecruit
Austin Consultants are the highest certified LabVIEW Consultancy in the UK. Visit them at www.AustinConsultants.co.uk
Come and Visit Austin Resourcing's Stand at NI Day on Nov 4th ,2014

Hello Fred,
Can you please tell me if Indian citizen can apply for this position. I have a graduate degree from US and have the work permit to work anywhere in US. So can I apply?
Thank you.
-Ujwal

Remote debugging an executable with dynamically loaded subpanel VIs

All,
A colleague of mine is attempting to perform remote debugging of an executable he has inherited. It includes subpanels that show dynamically loaded VIs. When connecting with the remote debugger, the main executable shows fine, but the dynamically loaded VIs are not showing their front panels. They appear ok on the remote PC where the executable is running, but they don't appear on his laptop from where he is running the debugger.
I don't have access to LabVIEW currently, and he cannot get this to work, so I thought I'd ask the community this generic question:
"Is it possible to remotely debug a LabVIEW executable with subpanels that show dynamically loaded subVIs?"
Technically he can see and probe the block diagram of the main executable, but the subpanels are blank where the dynamcally loaded subVI front panel should show, making it impossible to interact with the program.
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Thanks Josh. Does this issue have a CAR number I can tag?
Thoric (CLA, CLED, CTD and LabVIEW Champion)

TestStand not passing VISA info to LabVIEW

Hi All,
I am encountering a problem passing a VISA resource name to LabVIEW (2014) from TestStand (2014) which I cannot for the life of me understand or solve. Thus and so, I would be exceptionally grateful for any help.
I have two Thurlby Thandar LXI power supplies in a test rack, each with unique IP and socket addresses, of the form (TCPIP0::192.168.0.3::9221:OCKET). I have a LabVIEW project which contains a number of VIs, each related to the various functions of the PSUs, which are called from TestStand as appropriate.
I'm calling the LabVIEW 'Initialise.vi' in TestStand within a "ForEach" loop to individually extract the PSU's addresses from an array, open a session, then store the SessionNumber, but the resource name data doesn't seem to make it through to the VI's front panel VISA control. I've checked, checked and re-cheked that the correct values are being pulled from the array, I've even tried putting the LabVIEW call in a sub-sequence, just so that I can verify the data is not being corrupted in any way, but all seems to be well. It's as if the link between TestStand and LabVIEW is somehow broken.
To clarify the issue, on the very first run, the VISA information does get through, but subsequent runs retain this value, rather than overwriting it with the next value in the array. Setting the Run Options of the LabVIEW Action step type to Load Dynamically then Unload after step executes overcome this issue, but cause problems when trying to control the PSU later on in the test sequence.
The most maddening thing is that this used to work up until a couple of weeks ago, but unfortunately I can't remember what, if any, changes I may have made.
I've reinstalled TestStand and LabVIEW, but it hasn't solved the problem.
I've made the VI re-entrant, but that doesn't make any difference (in truth it shouldn't, as although the VI is called numerous times, all calls are sequential rather than simultaneous, so re-entrancy shouldn't be an issue).
I've configured the PSUs in MAX and given them aliases and tried the addresses direct, but that makes no difference either.
I've also tried performing the same exercise of passing data to LabVIEW just using strings and that all works fine, it just seems to be an issue with VISA resource names.
I have a suspicion I've checked or un-checked a check-box somewhere in the bowels of TestStand that's causing all of this, but haven't a clue how to find it.
If anyone can shed some light on this why this issue is occurring, or could even just point me in the direction of some utility which could sniff dataflow between TestStand and LabVIEW, I would be very grateful.
Many thanks in advance

Personally, I use Action Engines to handle my instrument resources. You can call the AE directly in TestStand. What I typically do is have a string input for name and then do a quick lookup for the desired VISA Resource to then control the instrument. This keeps all of the VISA stuff (including resource references) in LabVIEW. Have never had a problem with doing it this way.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

OpenCL for Labview is now Open Source

Howdy,
I wrote OpenCLV (OpenCL for Labview) about a year ago and have decided to make it an Opensource project availible on GitHub. It contains all my C code to compile DLLs, all the Labview code, some pre-compiled x64 DLL code and a pre-built .vip project if you just want to download and install it.
https://github.com/amcelroy/OpenCLV.git
My email is in the GPL license header in the C code if you find any bugs or have any comments.
Austin

tst wrote:
While I don't have use for something like this myself, the willingness to share open source code is appreciated.
One problem I would have with this, though, is the license. I'm far from an expert on licensing, but my understanding is that the GPL license is infectious - if you use a component which uses it directly in your code, you have to make your own code GPL as well to adhere with the license and the only way around that is to separate the GPL component into a separate, dynamically linked, component which would allow the end user to replace it if they want. See their FAQ here - http://www.gnu.org/licenses/gpl-faq.html#GPLInProprietarySystem
My understanding is that this is the reason that OpenG switched from GPL to BSD some years ago - BSD is more permissive and basically just requires you to place the copyright notice somewhere where the user can see it.
The strict interpretation of GPL prohibits integrating a GPL component into a non GPL software even dynamically. That is why there is a LGPL. And that was indeed why OpenG changed from LGPL (not GPL!) to BSD several years ago. Many of the most influencing OpenG supporters felt that it was rather cumbersome to use it in non (L)GPL software. The most prominent product of this nowadays is VIPM.
The only exception to that change are the shared library components of the libraries that I wrote. I didn't feel that there was any bad influence from integrating them as LGPL into any sort of LabVIEW application, as they are fully dynamic anyways and by the nature of LGPL have no viral effect on the application that uses them.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Labview generates an exe file but cannot close it properly

Hi all, I have used source code to generate an exe file. And I also load dynamic vi using this exe file. However, right now it cannot be closed properly by clicking "X" on top right corner. I think it is caused by loading dynamic vi but do not know how to solve it. Could you help me about this? Thank you!

Its here:
C:\Program Files\National Instruments\LabVIEW 2011\examples\viserver\dynload.llb\Dynamic Load Example.vi
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.
Attachments:
dynload.llb ‏118 KB

Dynamic calls from executable

Hi all,
I used to have LabVIEW application, as executable, which does dynamic calls to any VI. Until now it was done and built with LV2009 and worked fine as long as the vi.lib folder was copied to same of folder than the executable (this was needed for dependencies).
I've now moved to LV2012 and my application does not work anymore. It seems that dynamically loading any VI in vi.lib which calls an LLB is not possible and leads to an error. Is this known ? Is it a bug or a new limitation in LV2012 ?
Thanks,
Alex

Here is how to reproduce this issue :
First, open the attached GetVIDependencies.vi in the LV2012 development environment. In the "VI Patch" field, enter the path of the attached "Test.vi" and then execute the VI.
You should get 38 found dependencies and 0 missing. Then do the same with the exe version of GetVIDependencies. You should get 1 dependency which is missing. This is normal because the runtime does not know where <vilib> is placed. If you place the exe in the LabVIEW.exe directory (where vilib stands), you will get the same result.
Then, if you have LV2009, try the same with the 2009 executable version and "Test_LV2009.vi". It will work as soon as you place the executable in the LabVIEW.exe (2009) folder, no matter where "Test_LV2009.vi" is placed.
Attachments:
GetVIDependencies.vi ‏24 KB
Test.vi ‏7 KB
GetVIDependencies_LV2009.vi ‏23 KB

Labview 64bits et reels

Bonjour,
J'utilise un code labview avec des dlls pour faire des calculs optimisés.
Je souhaite compiler mes programmes en 32 bit et 64 bits avec le même code.
J'ai compilé mes dll en C en 32bits et 64bits, en utilisant les fin de nom qui vont bien pour utiliser le même code labview, et dans certains cas, utilisé les structures à condition désactivés.
Comment Labview 64bits considère les Réels [SGL]? sont-ils convertis en [Dbl]? Est-ce possible de le faire automatiquemenet sans avoir à changer le code? (initialisation de tableaux, indicateurs, etc...)
Merci d'avance,
- lippoi-

Bonjour lippoi,
Les SGL comme les DBL sont des nombres formatés de façon précise, définis par la norme IEEE 754. En ce sens, la taille de ces types de données ne varie pas en fonction des OS 32 ou 64-bits.
Cordialement,
Eric M. - Application Engineering Specialist
Certified LabVIEW Architect
Certified LabWindows™/CVI Developer

[Labview 8.5] Centrer les curseurs dynamiquement

Similar Messages

Maybe you are looking for