Labview 8.6 sound and measurement suite not installed properly under Vista 32 or 64 bit

I apologize if this isn't the correct place for this post but I'm in need of a solution. I recently purchased LabVIEW 8.6 Developer Suite with the Sound and Measurement Suite to create a NVH testing program at my company. I'm a newbe at Labview but I've been a programmer/computer hardware geek since the days of the TRS-80 model1. Here's my problem. I installed the package from the developers suite DVD's on my Windows XP professional desktop and everything is fine. I see the Sound and Vibration Measurement Suite listed under LabVIEW 8.6 in Measurement & Automation Explorer and the toolkit examples work in LabVIEW. When the laptop I purchased to do my actual work arrived with has Vista Business Edition 32 bit version installed I found the following problem. On that machine and two other Vista machines(one 64 bit and one 32 bit) that I tried, the installation doesn't register the Souind and Vibration Suite under LabVIEW 8.6 and they show the Sound and Vibration toolkit as not installed in the examples section. In the Windows control panel under National Instruments, all 4 machines show the Sound and Vibration Suite 6.0 as installed. I've tried to uninstall, reinstall, modify, from the control panel, and reinstall from the DVD's with no change in the outcome. I really need to get the laptop working as this is my actual development and test machine. Installing XP is not an option as the machine is newly purchased with a high end sound system and XP downgrade wasn't available. I'm out of ideas.
Solved!
Go to Solution.

I wanted to let close this as I got it working finally. This time I un-installed the Sound and Vibration entries from the LabVIEW control in Vista's uninstaller. Then re-installed and now it works. Before there were three entries, one for the suite, one for the runtime, and one for the toolkit. After removing all three and re-installing from the DVD, only the suite shows up, and all seems to be good.

Similar Messages

  • No sound and audio device not working properly, T61 vista

    I unistalled the audio device SoundMax integrated HD audio because I had problems getting the mic of my new webcam (Logitech pro 9000) to work. But after reinstalling the SoundMax audio driver the audio device is no longer working.
    Installing the SoundMax driver doesn't report any problems and the device manger also says that the SoundMax integrated digital hd audio device is working properly. But the speaker icon on the taskbar is crossed out. When hovering the mouse over the speaker icon it says Volume: 0 SoundMax integrated digital hd audio. When opening the Volume Mixer it says "No audio decivice is installed"...
    I've completly removed all drivers and reinstalling several times but I cannot get it to work so I really need some help now.
    All software + drivers regarging the webcam has been completly removed.
    System data:
    T61, Vista business
    Audio chip seems to be a Analog Devices 1984
    SoundMax driver version 6.10.1.5510 (latest available from lenovo)

    Really silly bug, but there are times with the T series laptops, specifically the T61s that seem to not project the sound through the speakers and the way to fix it is to just keep hitting the silver volume buttons up by your power button on the actual laptop.  This may or may not work for you, but I literally just got done with this on a T61 running a fresh installation of XP.  The buttons on the lenovo itself control the direct signal input and do a very poor job with integrating with Windows Vista and XP.
    Let me know if that works for you.

  • I downloaded newest itunes version and it would not install properly and now i can't open it. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. anybody having this problem.

    i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • ITunes 11.1.4 will not install properly - windows 8.1, 64 bit.  My only way to recover is to restore my system.  iTunes 11.1.3.8 functions properly.  When will Apply provide a workable update?

    iTunes 11.1.4 will not install properly - windows 8.1, 64 bit.  The only way I have found to recover is to restore my system.  I have unistalled/reintalled iTunes two times.  No success.  iTunes 11.1.3.8 functions properly (following system restore).  When is Apply expected to provide a workable update?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Firefox 13 and 14 will not install properly on my windows 7 starter. Also I cannot get the Scrapbook addon to work. Can you tell me why ?

    I have tried to install Firefox 13 and 14 on my netbook, running a Windows 7 starter OS. The installation begins to go smoothly from the setup.exe file; but after the installation seems complete, and I press the 'Open Firefox' button the firefox programme can be seen to start opening because it accumulates about 50mb of private bytes RAM on the windows task manager or on the 'process explorer' utility program by sysinternals. '''However the firefox screen/window never opens up and so firefox does not seem to be properly installed.'''' Also I have had problems with getting the Scrapbook" addon to install properly. I have another computer, a laptop, running XP Home, and I can get the Firefox 13 or 14 to install but it is on this other computer that I cannot get the 'Scrapook' addon to install properly; There is no notice on the Addon page saying the 'Scrapbook' addon does not work on Firefox 13 or 14, and the addon does install, but not properly, so it does not work.
    I have the old Firefox setup.exe files, and so I have managed to install an old version, firefox 3 or 4, on an external hard drive. I have successfully got this old firefox to work on the XP Home laptop from an external hard drive, and can successfully use the 'Scrapbook' addon in this way.
    I cannot understand why I have problems with Firefox 13 or 14. I think I first noticed the problem about 'Scrapbook' with Firefox 12.

    It seems your Mozilla installation is broken. Try the following steps to fully uninstall Mozilla Firefox:
    1. Uninstall Firefox as you would normally do.
    2. Open a command prompt as administrator.
    3. By using the cd and rd command, remove Firefox AppData and Roaming folders, for example:
    C:\Users\USERNAME> cd AppData
    C:\Users\USERNAME\AppData> cd Local
    C:\Users\USERNAME\AppData\Local> cd Mozilla
    C:\Users\USERNAME\AppData\Local\Mozilla> rd /s Firefox
    C:\Users\USERNAME\AppData\Local\Mozilla\*.* - Are you sure? (y/n) y
    C:\Users\USERNAME\AppData\Local\Mozilla> cd ..
    C:\Users\USERNAME\AppData\Local> cd ..
    C:\Users\USERNAME\AppData\> cd Roaming
    C:\Users\USERNAME\AppData\Roaming> cd Mozilla
    C:\Users\USERNAME\AppData\Roaming\Mozilla> rd /s Firefox
    C:\Users\USERNAME\AppData\Roaming\Mozilla\*.* - Are you sure (y/n) y
    C:\Users\USERNAME\AppData\Roaming\Mozilla > exit
    Remember to press Enter each time.
    4. After that, open a hard disk clean-up tool (such as CCleaner or Windows built-in) and remove all temporary files from your computer.
    5. Restart your computer. Download '''again''' the Firefox package from [http://www.mozilla.org/es-ES/download/?product=firefox-14.0.1&os=win&lang=es-ES Mozilla official servers] and try to install Firefox. If the problem persists maybe your computer has a problem or is infected with viruses.
    About the Scrapbook add-on, I could get it to work. It has no icon when docked to the toolbar, but you can anyway open it. Right-click a button on the toolbar, click Customize... find the Scrapbook icon, drag it to the bookmarks bar so you can see the icon and click on it to open it. Whenever you need to save a page, right-click that page and choose Save page.

  • Sound card driver is not installed properly whatever I do

    Hi
    I have a new hp pavilion dv6-1215ee just bought it last week and it has a problem with its sound card driver :
    I have 2 run the setup that installs the driver every once in a while if I don't then no voice comes of the speakers at all and when I run the media player it puts that red x sign on the voice file, say that there is a problem and gives a link 2 a troubleshooter on the net . Even if I reinstall the driver the next time I open the computer it is the same all over again .
    so what do u think ?
    http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=emea_middle_east&product=398...#
    these r the drivers as u can c it is IDT High-Definition Audio
    thanks 4 reading even if u don't post
    Message Edited by aymony1 on 08-11-2009 03:48 AM

    Hi,
    You are using now 6.10.6159.0 D (SP43935.exe) version? Right?
    So uninstall Your audio drivers and try to install previous version 6.10.6087.60 C from here.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • CS5 not installing properly

    I tried to install CS5 yesterday (from boxed disk of the software received directly from Adobe) and it did not install properly and/or completely. First I got a bunch of errors and then when I tried to install it again, it appeared to have done so but no files were ever extracted and no PS icons ever appeared on my desktop. I went searching for the software on the c: drive and finally found it under program files (x86). However, when I try to open it a bunch of sub folders appear and there is nothing to unzip, etc. I don't understand what happened.
    The laptop I'm using is an HP G71-340US. Intel Core Duo 2 T660, MS Windows 7 Home Premium 64 bit, 2.2GHz, 4GB DDR2 AM, Intel Graphics Media Accelerator 4500MHD, 320 GB Sata Hard Drive, Duel layer DVD +/- RW...
    I have Photoshop Elements 8 installed as that's what I've been using.
    I don't understand why CS5 will not install and unzip. Can anyone help? 

    Did you check the Start menu?
    Do you have these files on your system?
    C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
    C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Photoshop.exe
    If you do have these files, what happens when you try to execute them?
    -Noel

  • Sound and Vibration Suite - Leq Measurement?

    Hello,
    I am new to Sound and Vibration Suite and can't seem to find how to measure Leq. To clarify, I do not have LabView with this package, just the S&V Suite 2010. Currently the only options are Linear, Exponential, Peak and Equal Confidence (all found under the SPL Octave Analysis step).
    Do I need LabView to perform an Leq or Running Leq measurement???
    Solved!
    Go to Solution.

    Hello,
    The LEQ analysis can be found under analysis. Have a look at the following screenshot.
    Let me know if this is not what you are looking for.
    Eric
    Eric Liauw
    AE Specialist - Automated Test | CLD | CTD
    National Instruments

  • LabView, Sound and Vibration Suite

    Hi, I currently have NI sound and vibration suite and using this to collect and ananlyze vibration data from the NI modules like 9223. For other signals and data i am using DASYLab software to grab from NI modules. I am thinking to write program using just one software for everything, so I am thinking to purchase LabView.
    I believe LabView has functionalities to let us analyze vibration data (like order spetrum, calculate phase angle, polar plot, etc). My question is if I purchase LabView, my NI Sound and Vibration become kind of not very much needed, i.e. I am kind of waste it? or I can still get quite a bit benefit from having it when I write the LabView program? Any comments?
    Thank you very much for your help.
    regards,
    Yutao

    Hello Yutao1,
    You don't NEED LabVIEW and Sound and Vibration however if you want to get the most out of the Sound and Vibration Measurement suite then LabVIEW is the way to go. 
    If you want to export your current Signal Express project to LabVIEW you can do so by following the directions on page 6-4. That manual if for SignalExpress 2013, refer to your version of the manual for version specific examples. 
    Jonathan L.
    Applications Engineer
    National Instruments

  • Measurement and Automation Explorer not installed correctly

    I have a trial version of LabView 8.5.  Upon trying to change the Instrument I/O Assistant, I get "Measurement and Automation Explorer not installed correctly.  Please install from driver CD."  Well, I don't have the CD since this was a trial download.
    Basically, what I am trying to do is this:  I want to pull 4 variables/tags from an Allen Bradley PLC and log them to an Excel spreadsheet.  I am using RSLinx to communicate with the PLC, and LabView to compile the info. 
    Any help would be appreciated.

    Any Ideas?  I have the program running right now, and I'm kinda in a bind.  I also tried RSView32 Works to log the info, but there isn't enough flexibility in logging.  I need to log flow rate test results from a large automated machine.  The mahcine does a number of operations, but we are most concerned with these four tags (since it conducts four tests at once).  The problem is, the cycle time varies with the lot of product.  Some products require more time as the process is more delicate.  So, I can't use a time-interval logging method.
    As for variable change, I can't do that either because it records the 4 test results in series; not all at the same time.  That, and if the test is aborted (no tube), the previous test result value stays in the tag until there is a successful test.
    I found a variable that changes once per cycle.  I'd like to log the four tags once per cycle.
    BUT I can't do anything until I get the I/O Wizard working. 

  • My sounds and audio is not working. it's not in mute. help please

    i need help. my sounds and audio is not working. but it's not in mute button.

    Hi,
    Can you post back with the following details.
    1.  The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Sound and picture did not match?

    After recording the presentation it was OK and I could show it. But the fourth time I would show the presentation the sound and animation did not match the pictures? t.i. Keynote did not move to next picture (e.g. I was in picture No. 3 and it shoud move to next picture 4 but it doesn't -  and the voice to the next picture No. 4 started continued in picture 3)
    Why does this happened? Is Keynote not reliable?

    If sound files and images are placed on the slide and timed using Inspector  > Builds they will maintain the timing.
    I have suggested to do that instead of using the recording feature built in to Keynote which has proven to be unreliable with large numbers of slides and  longer voice overs.
    Switching to using builds will eliminate these errors.

  • HT1551 sound and picture do not match

    Certain movies on Netflix, when played, the sound and picture do not match.  It looks like a voice over.  You see lips move to the wrong voice. 

    various. I have some of my dvds that i converted plus numerous others bought off itunes store. the problem seems fairly reccurrrent over all videos?

  • Very recently when typing an email in Firefox, if I make a typo and try to backspace to correct, I get a sound and it will not backspace.

    I am on MacBook running on OSX 10.6.8. When I'm typing an email, if I make a typo and try to delete it or backspace, all I get is a computer sound and it will not allow me to do anything. I have to close that page and start over completely. It will not do it every time but does it frequently. I don't know what triggers it and how to make it stop.

    If you are printing to physical printer from Safari : Use Reader print button from Reader toolbar
    If you want to save a PDF from Safari to your local : Use Reader Save button from the Reader toolbar.
    PS: if you have PDF in read mode the  hover the mouse at the bottom of the page and the floating Reader toolbar will appear.
    Please let me know if this solves your issue.

  • How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

    How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

    Double-click the Home button and swipe the Task Bar to the right. Check Volume and Mute Settings.
    Message was edited by: Diavonex

Maybe you are looking for

  • Audio Mixer to Mac

    I just bought a Behringer Xenyx 502 mixer for use with a Shure microphone. I just want to record vocals with it. I didn't think about the inputs from the mixer to the Mac until after I bought it. The mixer has two 1/4 out's. I bought a cable that has

  • Cant take photos when chatting using ebuddy on my ...

    I have a nokia 6230i  and i am unable to take photos when chatting on ebuddy.What could be the solution to this problem?

  • How to compile using J2ME Wireless Toolkit?

    Hello! i'm doing a bluetooth application and i just want to ask how to compile using J2ME Wireless Toolkit? Is it the "Build" button? thanks!

  • IPhoto keywords are not supported in iMovie Media Search?

    Entering a search term in the Photo's tab in Media does not show any iPhoto pictures that have been taged with the Keyword that matches the search term? it only shows pictures that have the search term in the name o fthe file ... If this is how it wo

  • Question with Query

    Hello all, This might be simple for a experienced user. I wrote a query in my sql 2000 database, to retrieve records. The query looks like this. select employee.employeeLName,employee.employeefname,employeepay.badgeNumber, from employee INNER JOIN em