Labview and Adobe Acrobat output

We currently can print (one at a time) a vi graph to Adobe pdf format,
where each instance promping for a file name. Having hundreds of data
acquistions, I would rather have a solution that prints to PDF files with
no
subsequent prompt for the user. Is there such an animal?

In response to your exact question, I don't know, if the filename is generated by you as a prompt in LabVIEW, then you are well on your way. If it is prompted for by the system, then good luck. Not having worked with this before, I can't offer much.
However...
If what you are trying to do is, as some others posting here, to print a graph periodically, then I can offer an alternative suggestion:
I once created a strip chart recorder program in LabVIEW 5.0.1. It took data at a configurable rate, and compiled it to a color graph. Periodically (also configurable, in number of data points???) it would print a b&w graph of the data collected in that set. At the end of a period, I would have a stack of neatly printed graphs, just like a strip chart record
er (sort of...)
The trick to doing this was to call a different VI with configured graphs, all neatly put up on a page, and populate the graphs with the latest data, and programmatically print the front panel. This allowed incredible flexibility with certain restrictions. As this was a front panel, you couldn't (in my version) easily configure the number of channels. All graphs were individual graphs, and were autoscaled, or scaling was manually configured. Additional information such as filename (data were also saved to disk at the same time it was printed), date, time, and other pertinent information were printed on the graph printout. It was quite inexpensive, and until daylight savings time, was quite reliable (good old windows 95 liked to shut down the system to tell you it was changing the time, and hold everything, waiting for you to say "ok"...gotta love it...)
This is an excellent method of producing strip-chart recorder type output to a printer without much fancy p
rogramming. While it does take a little bit of planning to execute properly, it really works well.
Hope that helps

Similar Messages

I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening? I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.

I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening? I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.

same problem, it's been happening to me for a week or two now i'm thinking about backing up my documents and just wiping it completely, see if that works. Has anyone else tried this? I'm loosing time and have already lost a good few hours of work as it just crashes randomly. need help!!!
- saving these threads on my favourites cause i'm about to crash . . .

This regards Adobe Reader XI 11.0.07 and Adobe Acrobat Pro XI 11.0.07 running on Win 7. Copying text in a text callout (to paste into a text callout in another pdf document (3 instances of Adobe open) sometimes (only sometimes) causes the program to crash

This regards Adobe Reader XI 11.0.07 and Adobe Acrobat Pro XI 11.0.07 running on Win 7. Copying text in a text callout (to paste into a text callout in another pdf document (3 instances of Adobe open) sometimes (only sometimes) causes the program to crash, losing unsaved work. Windows Task Manager shows only a small percentage of cpu used and plenty of memory available. What is causing this?

scholtzkie wrote:
"Please wait...If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade ... For more assistance.... Windows is either a registered trademark...."
This usually occurs if you use a browser that uses its own PDF viewer, not the Adobe Reader plugin; see http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Win 7 and Adobe Acrobat 8 Professional

I have a user with win 7 and adobe acrobat 8 pro and in the digital signature on the PDF, it has a question mark and a pick of a person over it on the left hand side. I have reimaged the machine, recreated the signature, same thing. Logged onto his computer as me, so a different profile, and it does the same thing. Emailed it to me on my computer and it works fine. No pics on the signature line. Anybody ever seen this?

Can’t ready your reply…
Tim West
Helpdesk Coordinator II
mailto:[email protected]
972-421-5236 Helpdesk
855-355-4638 Helpdesk
CONFIDENTIALITY NOTICE: This electronic mail transmission is confidential, may be privileged and should be read or retained only by the intended recipient. If you have received this transmission in error, please immediately notify the sender and delete it from your system.

Hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10

hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10
also, these were bought on line with no disc (god knows why)
how can I access these from adobe.com

Hi Dave ,
Could you please elaborate a bit more about the issue ,what exactly has happened?
Are you not able to launch and PDF' or getting some error message ?
You can log in to Adobe.com with your credentials .If you do not have any prior credentials ,you need to create an account .Adobe.com will either let you purchase the product or opt for a trial version.
Please go ahead if that matches your requirement.
Regards
Sukrit Dhingra

Adobe RoboHelp 9 and Adobe Acrobat X Pro

Hi there.
I am currently using Adobe RoboHelp 9 and Adobe Acrobat X Pro (windows) can you please tell me which is the lastest version I can upgrade too and the name of the current version as well. Cost as well. thanks

Acrobat? XI (11) http://www.adobe.com/products/acrobat/product-comparison.html
RoboHelp? 10 http://thankyou.adobe.com/en/na/products/RH/V2/070512_robohelp.html?sdid=JPRQJ&skwcid=TC|1026689|robohelp||S|b|17858056738

SAP 6.00 and Adobe Acrobat Reader 9

Hi gurus,
Can someone know why SAP 6.0 and Adobe Acrobat Reader 9 was not compatible ?
Thanks a lot
Soufiene

Hi Soufiene,
The last homologated version by SAP was 8.2. There are already some people using v9 and working fine, but I cannot assure support on any issue on it.
You should refer to PAM (product matrix availability) site to know everything that is homologated and supported by SAP:
http://service.sap.com/pam
I hope this helps.
Best regards,
Cristiano

Font difference between MS WORD and Adobe Acrobat Pro

I am facing an issue with Font difference between the PDF's which are created through MS word "Save as PDF" utility and Adobe PDF maker add-on. Let me explain what my analysis detail.
1. Both MS word and Adobe acrobat using the font from the windows\fonts folder where my font Univers ATT font resides. I have confirmed this with the Acrobat distiller. below is the screenshot.
2. If I check the font properties through File->properties->Fonts tab both PDF font properties looks same.
Save as PDF
Adobe PDF
When comparing the PDF we are able to see the font formatting mismatch between these two PDF. Below screenshot.
Please advise me how to resolve the issue. The form should be match in formatting level also in order to proceed the implementation in my project.
Expecting your answer soon.

Thank you Bill.
Actually the difference not showing until we are selecting the Formatting option. The below screenshots illustrate the same.
Comparing two documents:
The difference not showing before selecting formatting.
Selecting the formatting option.
Once selected the formatting I am getting the formatting level difference between the PDF's. One is created with MS word SAVE AS PDF utility. The other PDF created with ADOBE PDFMAKER.
The comment pop-up clearly says in terms of font, fill color there should be difference. But I am not sure how Compare documents option comparing and showing the result. What all are the factors would be consider during comparison. Please help. Until resolving the issue I can't resume my project. Thanks in advance.

Merging Smartform Output and Adobe Form Output in a single PDF File

Hi All,
My Requirement is as follows -
I have multiple Smartforms and a single Adobe Form.
I want to merge the Smartform Outputs and Adobe Form output in a single PDF.
I am able to merge multiple Smartform Output in a PDF , but not able to find any way to merge smartform and adobe form output as the Smartform output is in OTF Format and Adobe form output is in PDF Format itself.
I have tried few ways , but could not find any success.
Request you all to give me some direction to this problem.
Thanks & Regards
Bhavika

Kumar,
I am afraid this is not possible using SAP functionality. There are probably 3rd party tools which allow you to merge several PDFs into one, but SAP itself does not offer such a mechanism. There is an internal SAP function, though, which can merge several "parts" (=several PDFs) within an Adobe-created spool request into a single PDF, intended for downloading this PDF from SP01.
This is described in note 1717357.
Best regards,
Alexander

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The Acrobat 9.x product family passed into "End of Support" mid-year of 2013.
Acrobat 9 support of MS Project via PDFMaker stops with Office 2007.
For Office 2013 support you must use Acrobat XI (11.0.1) or newer.
A good to have reference:
https://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Acrobat Pro and Standard DC are what are currently available for purchase.
Be well...

I am having autocad not respond when I am making a pdf using autocad 2002 and adobe acrobat XI

I am having autocad not respond when I am making a pdf using autocad 2002 and adobe acrobat XI
We have adobe acrobat 8 on another system that seems to work fine, what elsedo we need to do to get this trial version to work properly.
We are able to get everything set up , sized, etc, but when the actual process starts it is stating "autocad not responding and it just spins and never makes the actual final pdf.
Any help on this would be appreciated

It's probably a compatibility problem with the updated PDF libraries vs. you hopelessly old ACAD that can't be resolved. In any case, I'd consider it one of those things of trying to attack the problem on the wrong end. All major CAD programs have native PDF export these days and even ACAD has had since v2006 at least...
Mylenium

Safari (and Adobe Acrobat Pro) take minutes to quit!!!

Safari 4.0.4 (and Adobe Acrobat Pro 9.2.0) take several minutes to quit on Mactel with Mac OS X 10.5.8. I thought that they had frozen after selecting to quit such applications, or logout, restart or shutdown the Mac, but if I leave the Mac for several minutes, they eventually quit.
What can it be? The Console does not indicate any special activity.

Thanks for the reply. Short answer: Safari, or Acrobat Pro.
In short, if I open Safari (or Acrobat Pro, or both), and quit them after a while (a few minutes or so), no problem. They quit as expected.
But if I open any of them (or both) in the morning (I cold boot the Mac in the morning and shut it down at night every single day) and try to quit any of them (Safari or Acrobat) at night, each one of them takes several minutes to quit. In fact, if instead of quitting them I try to shut down, I get the error:
"Logout has timed out" - "The application Safari failed to quit and is not responding"
or
"Logout has timed out" - "The application Acrobat failed to quit and is not responding"
If then I leave the Mac idle a few minutes and them try to shut down the Mac again, it shuts down (this time, immediately; in one second or so).
IN SUMMARY. Something is preventing Safari (and the same for Acrobat Pro) to shut down normally in a few seconds. Instead, they need minutes to shut down.

Where can I download Java and Adobe acrobat for games

Where can I download Java and Adobe Acrobat for games?

Sorry you can get flash player for iPad has flash player is dead
Not sure about java may be some one else can help you on that

What is the different between adobe reader and adobe acrobat reader?

what is the different between adobe reader and adobe acrobat reader?What are the procedure to download a Acrobat reader?

Good day,
Adobe Reader is a free application we offer for viewing and printing PDF files. Many years ago, it was known as Acrobat Reader. You may still see some users refer to Adobe Reader as 'Acrobat Reader'. Old habits are sometimes hard to break!
You can download Adobe Reader by visiting: http://get.adobe.com/reader/
Kind regards,
David
Adobe Systems

Outlook 2007 and Adobe Acrobat Standard 8.0

I have Outlook 2007 and Adobe Acrobat Standard 8.0. I had to reformat my computer recently. I am using Win XP.
I used to have a couple of adobe buttons in outlook that allowed me to pdf entire email folders. Now, no matter what I do, I can't get these buttons back. It is super frustrating.
Any input highly welcome.
LM

Try updating AA8. It is at something like AA8.2.5.

Labview and Adobe Acrobat output

Similar Messages

Maybe you are looking for