Labview and Matlab inferfacing with each other

I currently have Labview Mathscript RT Module that allows me to insert my matlab script into my labview program, but the problem I’m having now is the mathscript module isn’t able to run the Simulink file I have. Currently my matlab script runs and saves some variables, then calls the Simulink module inside of it and returns to the matlab script to continue to run, then it gives my labview program the final outputs from the matlab script.
So my question is how should I go about editing the matlab script? Or is there a module I could download that would allow me to just call it directly from my mathscript RT module.

The Mathscript RT node does not actually run code in MATLAB®, but simply runs m script code. If you look in the help for the Mathscript RT Module there is no function call listed to open and run Simulink®. You may be able to accomplish this task using the MATLAB® Script Node which uses ActiveX to call MATLAB® software. If you'd like to try this you can find this node under, Functions >> Mathematics >> Scripts & Formulas >>Script Nodes.
You can find some more information about the Model Interface Toolkit and it's new features here, https://decibel.ni.com/content/groups/product-pulse/blog/2013/10/07/adieu-labview-simulation-interfa... or on it's product page.
MATLAB®, and Simulink® are the registered trademarks of The MathWorks, Inc.
Miles G.
National Instruments
Applications Engineer

Similar Messages

How to make your iPad and iPhone commicate with each other

How to make your iPad and iPhone commicate with each other

this is very easy...
firstly disconnect the DSL modem for the linksys..
then connect the computer to the linksys router (port 1/2/3/4)..
then access the linksys setup UI
open ur web browser
site: http://192.198.1.1/
username: [blank]
password: admin
now hook up the westell modem.. and goto the status page ...
check Internet IP.
if then Internet IP is 192.168.1.* then,
disconnect the westell from the router and goto the setup page.
change the LOCAL IP address to 192.168.2.1 (notice the 2.1 and not 1.1)
save settings....
connect the westell and viola ur online...
if the Internet IP is 0.0.0.0 then
goto the setup page and change the 'Internet connection Type' to 'PPPoE'
once done the page changes and give u a place to enter a username and a password.. this username and password is given by verizon..
sud be something like '[email protected]'
once done save settings...
goto the status page and hit connect... give it a few moments... u shud get a Internet ip address... if u get one ur online if not then power cycle the entire network. and try check to see if u get an ip..
hope this helps...
cheers..
Life is short... So get movin !!!
DopeLorD

IPod as a conduit to sync iCal and Outlook 2003 with each other?

I am able to synchronize my work Outlook 2003 calendar and home Mac iCal with the iPod in two separate files on the iPod. I can see them both if I select "All". My questions are:
1. What should I do to sync the PC and the Mac with the same file on the iPod?
2. Is it possible to snychronize the iCal and Outlook with each other via the iPod?
Thanks,
Iris
Powerbook G4 Mac OS X (10.4.5) PC/XP Pro

If you mount your iPod on your Mac, navgate to the iPod Calendars folder and double-click on an ics file it will import the calendar into iCal. So you can sync from the PC to the iPod to iCal uni-directionally. If Outlook 2003 can import an ics file then you should be able to sync the other way as well. However, in both cases you will essentially be copying over one calendar with another, not really synchronizing.

JTAPI and AXL interfering with each other

This has been driving me crazy today.
I had to write a custom callforward app, which upon setting the call forward, modifies some line properties as well (remove any pickup group that may be present).
To set the callforward, I've been using JTAPI and I've had this operation operational for over a year in a productive environment. Now I've added the updateLine axl command, and all of a sudden, the application no longer does what it's supposed to.
Here is what happens: via the phone interface, I enter the number I want to forward to, then send the request to my webserver. There, the forward is set via JTAPI without exceptions being thrown (since setting / removing a cfwd gets no feedback, getting an exception = it didn't work). Then, I send the updateLine for the lines I've just forwarded. It all works out nicely, the apps comes back telling the user all his calls have been forwarded to number X.
However, no callforwarding is actually made even though JTAPI came through telling me everything was okay. However, the pickup group does get removed from the line.
If you then try the same operation again, this time there's only the JTAPI part as the line no longer is in the pickup group, and now the operation works like as reliable as it has always done before.
Writing a sample app is going to be a bitch because this thing isn't quite so simple (and I'm re-using a lot of class libs of other projects so I can't just send the source code of everything to cisco) so I might not open a case on this but I thought I'd let you know.. and if Cisco employees visit this forum maybe they could spare some time trying to replicate.
Now I'm stick having to rewrite the whole callforwarding via axl which technically isn't a problem, but it's just going to take up time that wasn't forseen in this particular project :(

In order to modify a package, the developer would need to acquire a lock on the package. So Oracle would prevent two developers from modifying a package simultaneously. It would do nothing, though, to prevent two developers from serially overwriting each other's changes. That's one of the many reasons that you use an external source control system when developing any code, including database packages.
Justin

How do iPhoto and iTunes work with each other

I am very confused about how iPhoto (which is located in the file structure on my Macair under pictures) interacts with iTunes and Photos on my iPad. The management (including synching and moving photos) is not very intuitive. Anyone care to shoot me a link on where to find a good explanation or try their hand at explain this? Thanks.

Instructions here > iTunes: How to share music between different accounts on a single computer
And here > iPhoto: Sharing libraries among multiple users

Wireless keyboard & wireless mouse interfering with each other

Hello,
Since I've had the mac, my wireless mouse and keyboard interfere with each other.
The mouse tracks very slowly, and I have to keep waking the keyboard.
This seems to happen when I'm using Safari and the airport.
I have new batteries.
Any ideas please.
Thanks for help over this very frustrating problem.
Trump Marker.

I am having the same problem. Now, my wireless mouse sometimes works, mostly doesn't, and often sends the text into spasms (suddenly shifting to the right, or wildly highlighting passages) that require quitting Safari or Word. A few times I haven't even been able to force quit. And one time my computer started making a godawful noise, like it was wailing, until I had to shut down with the power button. I'm sooo sorry I downloaded this update and would like to hear from an Apple representative!

How do I Help Apple Care Stop Warring with Each Other and Fix the Problem with My iPhone that They Acknowledge Creating?

How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please researc

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates. There are several applications available that remove duplicates, but I am not sure which ones work or don't work. I want information on this, but most importantly I want to understand how to fix this problem permanently. Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates. I don't have Lion, but I would be willing to get it, if this would fix the problem.

Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
Message was edited by: mfduran

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

I have an I pad2, an iMac desktop and an I phone 5, how do I get them all to be bale to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Ay help gratefully received !!

I have an I pad2, an iMac desktop(2012) and an I phone 5, how do I get them all to be able to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Any help gratefully received !!

Graham,
For the iPad, iMac you need to create verifyible e-mail addresses created with one of the providers such as Yahoo, Gmail,etc. For the iphone you should use it's phone number, but an e-mail could be used for it too. If you want to associate these e-mail addresses with a single ID, I'm including a link to give you info about how you can do that. Read it carefully, as it can be a bit confusing.
http://support.apple.com/kb/HE68

I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button

I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button to navigate back to my starting point the bookmarks are replaced by "page thumbnails". Is there anyway to stop this from happening?

Hi Pusman,
While setting up the links, if you choose to open the file in a new window then you won't face this issue, then you can simply switch to the previous file and bookmark view will remain as it is.
Does that helps with your query?
Regards,
Rahul

I have the iPhone and my own Apple ID. I would like the iPad to have my husbands Apple ID so we are able to communicate with each other (he is deaf). How can FaceTime and iMessage be set up to do this?

I have the iPhone and my own Apple ID. I would like the iPad to have my husbands Apple ID so we are able to communicate with each other (he is deaf). How can FaceTime and iMessage be set up to do this?

Log into each device with your own Apple ID's in Settings > iCloud.
Then, so you can share preiously purchased apps, log into both devices using the Apple ID used to make those purchases, but ONLY in Settings > iTunes and Apps Stores.
Verify that each device uses your own Apple IDs in Settings > Facetime and Settings > Messages.

HT1386 My husband and I traded ipod with each other. Now, I am unable to put my entire library on the ipod. Only some songs imported. HELP

My husband and I exchanged ipods with each other. I attempted to import my whole music library to this current ipod. only certain songs imported. Not all. How do I get the WHOLE library to this ipod?

if I sign in my iTunes on my husband's computer, will it delete his iTunes library?
LOL! If Home Sharing deleted the other person's library, then Home Sharing wouldn't have too many users, would it?
Seriously, Home Sharing sounds like a fine solution to the need you express.
However, your question suggests that your library is not backed up, right? You and your husband should each make a backup of your libraries.

Hi my mum has recently gotten a white iphone4 and i have a black iphone4 we both would really want to switch over our phones with each other i was just wondering if there would be any issues would the data contract be switched over???

please can someone help me i have got a black iphone 4 and my mum has got a white iphone 4 we would like to switch both of our phones with each other we are just worried if the data services and our contracts will be switched over we dont care about our phone music and contacts ok thankyou

Most carrers won't care if you change phones as long as you are payng for al the services they require. Since you both have iPhones, it probably won't be an issue, but since we don't know who your carrier is we can't say it they will have a problem with you making that change or not. The only way to make certain it won't be a problem is to contact your carrier...

My husband and I each have iphones, how can we share the contact and calender info we have have in our iclouds with each other?

My husband and I each have an iphone 4S, how can we share the contact and calender info we have in our iclouds with each other?

You can make one or more calendars of one iphone sharable and the other user will be able to have those sharable calanders synced. Unfortunately, you can't do that with contacts. But you could go to the computer account used by you or your husband, perform a backup of the contacts (see the file menu), copy the file to the other account used to sync the other iphone, and restore. It's a manual process that has to be performed periodically, but doable.
The other method is for each of you to use the same iCloud ID and have both iphones synced to be identical. But I don't recommend that otherwise you'll each get the same text messages and who knows what else.

Labview and Matlab inferfacing with each other

Similar Messages

Maybe you are looking for