LabVIEW and NI opportunities in the UK

Hi Everyone,
I am a Recruitment Consultant Specialising in the placement of professionals within National Instruments environments in the UK. A few years ago I noticed there was a lack of skilled agents within this environment and I have since built up a specialisiam. I have developed relationships with almost all of the NI alliance partners in the UK and I am always looking for people with all levels of experience with NI products.
If you or anyone else you know would be interested in hearing about the current opportunites across the UK please contact me either by replying to this blog or on:
[email protected] or my direct line is:01275 813 672
Many thanks,
Ashley Malpas

dherron wrote:
Example:
I top up £10 in October, I get 300 free texts & 150 free evening & Weekend minutes. Come November I still have nearly £10 credit in my phone because I didn't go over 300 texts and I only made phone calls in the evenings & Weekends. My free Texts and Minutes do not carry over into November so I start using the £10 credit that I never used all October. Come December i'll have no credit left so I top up £10 again and it'll do me the next 2 months.
Thanks for your help.
My plan says that I get 500 minutes to any uk landline or O2 mobile from a registered post code for £10. Other things I suppose cost set amounts, such as text messages, or to other mobiles, and they are detailed in the tariffs.
Now, if I understand what you are saying, at the end of the month, if I have only made say 50 minutes of calls to uk landlines and nothing else, I would still have my £10 balance, but I would lose my remaining 450 minutes and any calls I made from then on would start getting charged to my £10 balance at the rates spelled out in the tariff?
If at the end of the second month, I still had say £4 left on my balance, would that still be good to keep calling or texting and getting charged at the rates spelled out in the tariff?
So it seems that I would not need to top up every month to be able to make calls or texts until I had run out of balance on my £10 top up?
Have I understood you correctly?
The way I make calls, that £10 could last me 5 or more months!
What I really need to be sure of is that I would still be able to use my 12 month free bolt on for internet using their cloud and bt openzone networks and use internet, email and maps without it getting charged to my top up balance.

Similar Messages

  • Hi! can any1 pls let me know how to create a look up table in labview and use that in the vi.

    hello !
    i have no idea how to build a lookup table(as v use in microcontroller) in labview and use that in vi.pls help me
    txs
    nitin
    Solved!
    Go to Solution.

    If the lookup table is always going to remain the same (e.g. a character generator or something similar) you can place the values in a 2D array constant on your diagram, with the input value as one column, the equivalent as the other. When you need to perform the lookup you use an index array to return all the values in the "input column", search it using "search 1D array" and use the resulting index number to index the other column's data. If the values may change, then it would probably be best to load an array control with your equivalent values from a file.
    P.M.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • I am new to LabVIEW and I am having the classic problem of trying to configure several digital I/O lines in a single VI

    . I am using a PCI-1200 with 3 8255's. I wish to configure port a to all digital outputs. I want to control the states of the individual lines with boolean switches. I seem to get a strange mix of states on the outputs when I have more than one switch.

    . I am using a PCI-1200 with 3 8255's. I wish to configure port a to all digital outputs. I want to control the states of the individual lines with boolean switches. I seem to get a strange mix of states on the outputs when I have more than one switch.Have you looked at the examples? There's one called Write to 2 Dig Ports(8255).vi. It uses front panel Booleans and it looks easy to modify for three ports.

  • Same code gives different results in Matlab Script in Labview and Matlab

    I am implemeting a Matlab code into a LabVIEW application using Matlab script. When I import the exactly same code to the Matlab Script in LabVIEW it gives a different result than it is in Matlab. This code is a simulation code including first kind bessel functions. Using LabVIEW 7.1 and Matlab R14 service pack 3.

    Labview 8.5
    Matlab R2009b
    Attached are the graphs produced by matlab script in labview and in matlab.
    The minimum of graph produced by matlab code is below 1 and that in labview is above 1.
    Thanks a lot for your reply.
    Sorry, I haven't quantified the "sometimes" yet. 
    Attachments:
    matlabsResult.jpg ‏29 KB
    LV.png ‏84 KB

  • Any equalizer program in LabVIEW SVT which can control the dBPa under 1/3 octave frequency band?

    Could we adjust the dBPa of a wav file by equalizer and then save the dBPa modified file to the other wav file for play? The equalizer should be controlled under 1/3 octave frequency band.

    Taipo,
    If you import the .wav file into LabVIEW and convert it to the waveform data type, you could use the SVT to do third-octave analysis on the waveform and then use the SVT Weighting Filter VI to adjust the level of different octaves in the signal.
    If you are looking for a pre-made equalizer example for a .wav file in LabVIEW, we do not have an example that does that at this time. However, there are many programs available on the internet that can equalize a .wav file.
    Sincerely,
    Ross C
    Applications Engineer
    National Instruments

  • I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

    i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it.  I am gettting the data from rs232 interms of 0 or 1.  and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

    I have attatched the vi.  Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off.  suppose if 0 comes the corresponding data status is wrtten into the text file.  But here the problem is the same data will be printed many number of times.  so i have to make it like if there is a transition from 1 to o then only print it once.  how to do it.  I am doing this from few weeks please reply if you know the answer immediatly
    thanking you 
    Attachments:
    MOTORTESTJIG.vi ‏729 KB

  • How to get the data of Open Opportunities and Closed Opportunities

    Hi Guys,
      i'm studying about Sales Opportunities in SAP BusinessOne.
    i'm able to get the data about Sales Opportunities(i enterd), Opportunities Report and Lost Opportunities.
    But i dont know how to get information about Open Opportunities Reports and Closed Opportunitiesn Reports.i'm unable to find even their names of tables.
    plz send a reply.................
       with regards,
    santh

    Thanq Alexey for ur Helpful Answer,
       i'm aware about execution of a query in the Query Analyzer of SQL Server.but i dont know how to move to ShowDebugInformation Menu.
       can i find it in  the SAP Business One Tool. or do i need
    to check any data base help given by B1(Ex:- REFDB2004).
        plz give answer for  this also............
      with regards,
    santh

  • Can I use a camera for application in Labview and VBAI at the same time ?

    Dear all,
    I'm trying to save an AVI file with Labview and make an image process with VBAI at the same time, in one machine.
    The error : "Camera already in use" displayed.
    My Camera is a GIGE and I work with Imaqdx. I've test the multicast mode but it only operate with several machines.
    How can I do this ?
    Thank's to help me,
    Yoann B

    I'm not necessarily saying that.  It's been a while since I've used VBAI, so I don't remember all of the capabilities, but if VBAI can do the inspection and recording at the same time, you should be fine.
    The trick is that only one program can access the camera at the same time.  That application reserves the camera, thus making it unavailable to others.
    Chris
    Certified LabVIEW Architect
    Certified TestStand Architect

  • Can I run 64 bit LabVIEW and 32 bit LabVIEW on the same machine?

    If I have a 64 bit OS (Windows 7 64 bit or Server 2008 64 bit) can I install and run 32 and 64 bit LabVIEW on the same machine?
    John

    LabVIEW 64-Bit vs. 32-Bit Applications FAQ
    Q. Can I have both LabVIEW 32-bit and LabVIEW 64-bit installed on the same 64-bit machine?
    A. Yes.
    The FAQ will likely answer other questions you have regarding the restrictions and issues you will have with having both versions and compiling in one vs the other.

  • How to know the stake amount of both the won and lost opportunities

    Hi,
    I need to create a report.
    I would like to have a chart related to the last year opportunities.
    I would like to know in the same reports, the stake amount of the opportunities with the sales stage = Closed/Won, the stake amount of the opportunities Won + Lost (without the stake amount of the open opportunities).
    And I would like to create a third field to calculate:
    ==> Stake Amount Won / (Stake Amount Won + Stake Amount Lost)
    I create a formula inside the stake amount to put 0 if the sales stage <> closed/won and the real value of the stake
    amount when the sales stage = closed/won. In my report I see the value "0" for opportunites <> Won but when I ask for the grand total, the system give me the results of the stake amount of all the opportunities.
    Do you know how to design this report?
    Regards,

    Hi Venky
    For the moment I can't create a formula for my needs. I'm going to try to use Union analysis.
    I would like to make
    - a first report which give me the stake amount *(1)* of all the opportunities with a sales stage=closed/won.
    - a second report which give me the stake amount of all the opportunities *(2)* with a sales stage = closed/lost and closed/won
    - a consolidated report where I can use the results of the 3 previous reports and make formula based on those results.
    formula = *(1) / (2)*
    Do you think it is possible to create formula based on the results of two reports?
    Regards,

  • I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

    I have written a binary file with a specific header format in LABVIEW 8.6 and tried  to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

    I can think of two possible stumbling blocks:
    What are your 8.6 options for "byte order" and "prepend array or string size"?
    Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
    LabVIEW Champion . Do more with less code and in less time .

  • Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

    Hi i am new to labview
    I want to extract data from a text file and display it on the front panel.
    How do i proceed??
    I have attached a file for your brief idea...
    Attachments:
    extract.jpg ‏3797 KB

    RoopeshV wrote:
    Hi,
    The below code shows how to read from txt file and display in the perticular fields.
    Why have you used waveform?
    Regards,
    Roopesh
    There are so many things wrong with this VI, I'm not even sure where to start.
    Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
    Not using Read From Spreadsheet File.
    Use of local variables to populate an array.
    Cannot insert values into an empty array.
    What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
    Also, how does this answer the poster's question?

  • What are the current versions of Labview and Teststand

    Hello,
    i am currently downlading the current versions of teststand and labview for evaluation.
    In the Teststand-link i saw that it is called "Teststand 2012".
    1. But there was no version-information in the Labview-Download. Is this also version 2012?
    2. Are both things 32-bit-software?
    3. After i installed the evaluation-downloads - can they be activated with a key or do i have to install it again when the CDs arrive in my office?
    Thanks for help
    Solved!
    Go to Solution.

    OnlyOne wrote:
    Thx for the links.
    I am using Windows-7-64bit - should i prefer then also Labview 64? (The NI-download-Links only provides 32bit for download)
    Will there be any problems converting my existing Labview 8.5-Vis to the new Labview2012?
    Thank you
    You can have both the 32-bit and 64-bit installed.  Just remember your target when you build an exe.  64-bit compiled programs can only run on 64-bit machines.
    You should have no problem upgrading your code from 8.5.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How to connect mysql database to labview and plot the graph

    Hi all,
     I am doing my final year project about labview. I need to connect my mysql workbench database to labview and plotting two sinwave in same graph. I can already connected my labview to mysql and showing the data in labview table.But I need to plot the two sinwave in on graph according to table data. Eg: table data&colon;      timestamp   wind speed  wind direction
                                                      ​                                                  ​                                                  ​                                            2004-01-01         0.5                 56
                                                      ​                                                  ​                                                  ​                                            2004-01-01         0.6                 60
      The attachemtn vi is about inserting file and plot the graph. And now I  want plotting the sinwave using table data and the  wind speed Y-axis,wind direction Y-axis in both side of my graph and the X-axis is showing the whole day timing like 00:00:00-24:00:00.  Can anybody combine these 2 vi to polting the graph according table data not according to file data.Thanks
    Attachments:
    Mysql.vi ‏11 KB
    Insert File.vi ‏25 KB
    Wind Project.vi ‏24 KB

    Please don't start a new thread. Stick to the original.
    http://forums.ni.com/t5/LabVIEW/How-to-plot-wavefo​rm-or-graph-using-table-database-which/td-p/294036​...

  • I've got the labview vi written to read my IMU data from a serial port in COM1 and it displays onto the table on the front panel. I'm having trouble getting this data onto an excel spreadshee​t. Any ideas?

    I've got the labview vi written to read my IMU data from a serial port in COM1 and it displays onto the table on the front panel. I'm having trouble getting this data onto an excel spreadsheet. Any ideas? Right now my data will collect one reading instead of continuously reading my IMU which displays data in a continuous stream.
    Thanks
    Attachments:
    Read_IMU_Drew.vi ‏21 KB

    Hi
    Your vi is in 2009 version, which i am unable to open in 8.6
    However, if you want your data to be saved in excel sheet, here is the VI
    Somil Gautam
    Think Weird
    Attachments:
    save to excel.vi ‏12 KB

Maybe you are looking for