LabVIEW Application Builder Crash : ntdll.dll faulting module
Hello guys,
I'm currently experiencing problems while building my project (LV2012 (32 bits) , Windows 7). At the very end of application build, LabVIEW crashes with no explanation (Screenshot in french, sorry)
Windows error logging follows :
Event 1000 Application Error
Faulting application name LabVIEW.exe, version : 12.0.0.4024, time stamp : 0x4fea600e
Faulting module name : ntdll.dll, version : 6.1.7601.17725, time stamp : 0x4ec49b8f
Exception code : 0xc0000374
Fault offset : 0x000ce6c3
Faulting process id : 0x16fc
Faulting application start time : 0x01cda5350f41f87c
Faulting application path : C:\Program Files (x86)\National Instruments\LabVIEW 2012\LabVIEW.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id : 8e5b1344-1128-11e2-97d8-c0f8dae81bad
I had the same problem on LabVIEW 2011. I tried to build my application with another computer (also LV2012 32 bits and Windows 7 64 bits) and I do not have any error.
What is wrong with my computer?
For french people, topic in french
Thank you for your help,
Regards,
Quentin
Solved!
Go to Solution.
Solution found :
-Uninstall all NI products
-Clear registry keys related to LabVIEW
-Delete National Instruments directory into Application Data
-Reinstall LabVIEW
Similar Messages
-
Please help me solve this problem.
I get the appcrash when i pause my the downloding apps...and i cant really understand why everytime i open my itunes the music files video and app were missing and i have to insert them over and over again when i want to sync my ipad..this problem actually happened before i got my ipad2 that time im using my ipod touch..i hope u can help me solving this problem :)
-
2014.2 Random Crashes ntdll.dll
Pretty consistent crashes of the version 2014.2 Always fault module name ntdll.dll
This is happening on our desktop and laptop, on different projects. It happens if we use the "Mercury Playback Engine" or the "Software Engine" Both machine are only used for video editing. Nothing else is installed. The crashes are completely random to what work we are doing on each machine. Sometimes is happens during playback, sometimes scrubbing the timeline, sometimes zooming in on the timeline, sometimes opening a new window. Totally random. This is a pretty "crappy-way" of having to get your work done. Talk about slow. Every time I touch a key I'm holding my breath, and when is doesn't crash I immediately save the project file. On top of that I have to spend valuable time searching the forums for some type of solution. Don't get me wrong I think the forums are awesome. 10,000 times better than Adobe phone support. The only solution I could find quickly was to convert back to a earlier version of premiere prior to the latest update. Anyone else having similar issue?
If I understand some of what was mentioned, the only problem with that is any work saved on the latest version will not convert back.
Both of our machines are running windows 7 professional. As far as we can tell all updates have been applied. A couple of these projects where started prior to the latest adobe update and we didn't have any issue until now.
Ok Adobe, you guys decided to go this "New" scheme of delivering your software so we could have the latest updates. If you are going to make changes "quicker" and "more often" and allow us to "roll-back" to earlier versions of the software as temporary solutions to update problems, wouldn't it make sense to allow us to "roll-back" our projects as well? Just at least 1 version?Greetings, I have been experiencing this exact same problem. Just preformed a complete re-install of my OS making sure all Win 7 64 updates were properly installed and then re-installed all Adobe sw again too all on to brand new SSD drives. I also tried removing about 1/3 of my installed fonts too. I will mention that I am also using a Matrox MXO2 Max using their latest sw and have worked with their support team who has now suggested that Adobe is who I need to get in touch with now. I am NOT able to make myself the Ginny pig here but I do need a solution ASAP! Here are my crash results: (I am now experiencing a crash about every 15 minutes to 1 hour).
==========================================================================
Date: 05-04-2015 Editing for about 15 minutes continuing color grading using Matrox primary (advanced) plugin.
here are the crash details:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 8.2.0.65
Application Timestamp: 5486db4a
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.18798
Fault Module Timestamp: 5507b864
Exception Code: c0000005
Exception Offset: 000000000004f8d6
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: e48e
Additional Information 2: e48ecf9f2560a4e1b4f01d97ad1a464f
Additional Information 3: a4b1
Additional Information 4: a4b123fbc2e03edde0d0483bb2ae95b7
=========================================================================
Please let me know if anyone figures this out as this has now started to effect my business!
Thanks, Rip Noel -
Can I repair the ntdll.dll fault that prevents InDesign CS4 from opening in Windows 7?
I am running Windows 7, all updates installed, and CS4, updated to 6.0.6.622. This problem does not affect any other app in CS4. Starting yesterday, InDesign would crash as soon as I opened a document. Then it would crash before I could open a document. Now it crashes once the small pink splash screen displays. The Windows detail is this:
The same behavior occurs with with my machine in Safe mode.
I have not added any fonts.
I attempted the manual "trash preferences" procedure found on this site.
I attempted the "default printer" solution.
I already rolled back my system to October 13 (my earliest possible restore point) and then reinstalled InDesign, then when the problem persisted installed the 6.0.6 patch again. So rolling back from the update is not a solution. Would uninstalling inDesign before reinstalling be required?
This department (3 users) got new laptops witn Windows 7 and CS4 in January, and I am the only one experiencing this. I know I am current on all updates, but I can't speak for everyone else. Perhaps I am too up-to-date.
My IT dept thinks the standard solution of re-imaging the hard drive is required, but that takes a day and then another two to reinstall/re-register/reconfigure all my apps. I have work to do!
I sure hope someone else has solved this already; I have spent a lot of time searching for a clue. Thanks all, in advance.
Problem Event Name: APPCRASH
Application Name: InDesign.exe
Application Version: 6.0.6.622
Application Timestamp: 4caa28e2
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7600.16559
Fault Module Timestamp: 4ba9b21e
Exception Code: c0000005
Exception Offset: 00028e0e
OS Version: 6.1.7600.2.0.0.256.4
Locale ID: 1033
Additional Information 1: abcc
Additional Information 2: abcc8f7853b48d9807d6d51eb1fa5df9
Additional Information 3: abcc
Additional Information 4: abcc8f7853b48d9807d6d51eb1fa5df9I just tried the Recovery Folder solution, where you delete the contents of the folder. This sounded promising, because the first time ID crashed, a document was open. When I launched ID again, the doc was recovered. I closed it without saving changes, after which ID crashed. After that point, ID never got beyond the splash screen. There were two items in the folder (see screenshot), but alas, no joy.
Thanks Peter for the cleanup - I had not spent any time reading the forum how-to (and I write user docs). -
OCCI 10.2.0.3.0 Patch 13 cause crash ntdll.dll on vista 32bit
hi,
I ceated an application using VC++ 2005 and OCCI 10.2.0.3.0 (update patch 13). the application run smoothly on 2000/XP. But if it is run on vista (32bit, tested on several computer), it ocassionally creates crash (not always) when trying to connect to oracle server (also when trying to connect to non existance server, sometimes crash and sometimes successfully displaying time out message),
The crash message is as follows:
Problem Event Name: APPCRASH
Application Name: myapp.exe
Application Version: 0.0.0.0
Application Timestamp: 473ad65c
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000005
Exception Offset: 0006278d
OS Version: 6.0.6000.2.0.0.256.6
Locale ID: 1041
Additional Information 1: 97d2
Additional Information 2: aae4dc92551b959656fcd53b4bc6e928
Additional Information 3: 0701
Additional Information 4: 257a6a00f5b8f65db312588a0172a174
here's the code snippet:
try
Environment* m_occiEnv;
Connection* m_occiCon;
m_occiEnv = Environment::createEnvironment();
if (m_occiEnv != NULL)
m_occiCon = m_occiEnv->createConnection(user, pass, constr);
if (m_occiCon != NULL) return SUCCESS;
catch (SQLException ea)
m_strLastErr = _T(ea.what());
return FAILED;
I then tried to upgrade the OCCI using OCCI 11.1.0.7.0 (using the same source code). It also creates random crash but on OraOCIEI11.dll (not ntdll.dll) as follows:
Problem Event Name: APPCRASH
Application Name: myapp.exe
Application Version: 0.0.0.0
Application Timestamp: 494c1430
Fault Module Name: OraOCIEI11.dll
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 48e3389a
Exception Code: c0000005
Exception Offset: 00103991
OS Version: 6.0.6000.2.0.0.256.6
Locale ID: 1041
Additional Information 1: 298d
Additional Information 2: d9ff73d6b133e41e5ad025e8ab5a02eb
Additional Information 3: 3eb8
Additional Information 4: aa3992fb7f26e9ad1e018c76d9dcdb5a
any suggestion?
thank you
Edited by: chn on Dec 19, 2008 3:19 AMhi again,
I tried to change the createEnvironment into the following:
m_occiEnv = Environment::createEnvironment(Environment::THREADED_MUTEXED);
and somehow, using the latest OCCI 11.1.0.7.0 with the above code, the application seems running well. Tested around 40 times, haven't got any crashed.
When using the OCCI 10.2.0.30 patch 13 with the above code, the application occasionally is still crashed. -
Itunes crashing on startup - Fault Module Name: KERNELBASE.dll
Itunes keeps crashing 3 seconds after i open it and displays this message.
I use windows seven and did not have this problem until 15 minutes ago. Any idea on how to fix this? i have updated to the latest itunes and no fix.
thank you!!
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.4.1.10
Application Timestamp: 4e4e1904
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7600.16850
Fault Module Timestamp: 4e21132b
Exception Code: 80000003
Exception Offset: 00031f66
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789I'm researching this now. I have the same problem. Here is what I'm comming up with. Is that there is a corruptioin in the registry (I know... big surprise with WIndows). And/or/related is that there is some corruption with the user profile. I'm not an IT guy so take my assesment with a grain of salt but this is how it's looking to me.
Solution that might work:
Launch into the command prompt as an administrator and run "sfc /scannow". for windows 8
Russ -
IE crash on start (Fault Module Name: DefaultTabWrap.dll)
IE crash on start with the following error even after I have reset IE in save mode.
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 11.0.9600.17041
Application Timestamp: 531807e4
Fault Module Name: DefaultTabWrap.dll
Fault Module Version: 1.8.0.1
Fault Module Timestamp: 52e17091
Exception Code: c0000005
Exception Offset: 000012e8
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789Full Windows version is...?
Start here: http://malwaretips.com/blogs/trojan-bho-virus-removal/
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft -
Adobe Audition App Crash on Startup (windows) ImageRenderer.dll Fault Module
I just installed Audition and when I try to open it I receive an error message that it has stopped working and my options are to close the program or check online for a solution. I checked online and nothing came up. I checked my account and everything is up-to-date. I've uninstalled and reinstalled the app but it comes up with the same error code. Can someone please help me to figure this out?
When I view the problem details it says:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Audition CC.exe
Application Version: 7.1.0.119
Application Timestamp: 5421531b
Fault Module Name: ImageRenderer.dll
Fault Module Version: 7.1.0.119
Fault Module Timestamp: 54213727
Exception Code: c000001d
Exception Offset: 00000000001f5342
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: cfa6
Additional Information 2: cfa6395cfc11b929d4cc83f7fcd45588
Additional Information 3: 4285
Additional Information 4: 42859895e7fdc411ae9c413f0642b513
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtINZ123....
Actually Adobe looked into this very thoroughly for me. I was in contact with Durin who passed all of the information I gave them over to their programming department. They then asked for additional information via Email, which is why it's not on this thread. After several back and forth messages they didn't know why it was happening. One thing that they did point out, which I wasn't aware of, is that Audition is one of few Adobe products that requires the SP1 pack for Windows 7. I had just installed 7 on a new system so I hadn't updated to SP1 yet. However, even after I upgraded to SP1 it didn't work. I would recommend checking to be sure you are up to date with Windows, which is why I mentioned this. Maybe it will help you. I know it helped others who had the same issue as we have. I knew that Adobe was working on an update to address so other issues and I was hoping they could figure it out with the update. I installed the update and after that I WAS able to run Audition 2014 after that. So make sure that you do run the update.
I was always able to get Audition CS6 to work without any issues so while Adobe was trying to figure out why it wasn't working for me I just used CS6. If you have the subscription then you can install CS6 via the Creative Center by going to the Apps and down to the Find New Apps section. Just make sure that you have the versions turned on. You will find that you can download and install CS6 from there.
Hope that helps.... -
Hello everybody> my itunes has stopped working and the problem report stated the following:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.3.3
Application Timestamp: 4f14cc3d
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7b8f0
Exception Code: 80000003
Exception Offset: 0003381b
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
can anybody help me?Are you seeing a similar message when launching QuickTime Player?
What security software is installed on the computer? Have you tried testing in an admin account or after uninstalling tthe security software?
Use one of the following articles to guide you through removing iTunes and the related QuickTime files.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Hi Michael,
I am using WINDOWS XP with SP2 ; I am facing a problem after installing Sp6 for VC++
First Chance exception in build.exe(NTDLL.DLL);0xC0000008:Invalid Handle
Please Help me out for this Michael.
Thanks & Regards,
Rakesh
RakeshHowdy Rakesh,
I'm not sure who Michael is, but you might want to try the MSDN or the MSDN forum for general VC++ help.
Warm regards,
pBerg -
LabVIEW application builder - Deep start menus
Hi, is it possible using the labVIEW application builder to create start
menu program groups that are more than one level deep, i.e.
Start\Programs\My App\ToolsJust for you to compare I have attached some screenshots of my setup. Maybe you find a difference.
Attachments:
App_Builder_Setup.gif 152 KB
App_Builder_Menu_example.gif 83 KB -
Is LabVIEW application builder needed for TS deployment?
Does the LabVIEW application builder need to be installed for TS deployment of a project containing LabVIEW VI's?
LabVIEW Application Builder is only necessary if you are deploying LabVIEW files, even then you can use the flag "Include without Processing Item or Dependencies" in all your LabVIEW files to create an image and optionally an installer without requiring LabVIEW (or app builder) at all; however, using this flag is not recommended becuase if you use it you would have to include all the files and their dependencies in your deployment manually (either by including the root directory of your test system or by adding all the files to your workspace) and you would have to make sure that they are not broken and can be called from the run-time engines you are including in your installer.
-
Windows Forms Application Crashes Out with "Faulting module name: clr.dll"
OS: Windows 7
Framework: 4.5
Windows Form Application crashes while invoking printer settings method "printersettings.sethdevmode()"
Application: DHSDEVASystem.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
Stack:
at System.Runtime.InteropServices.Marshal.CopyToManaged(IntPtr, System.Object, Int32, Int32)
at System.Runtime.InteropServices.Marshal.Copy(IntPtr, Byte[], Int32, Int32)
at System.Drawing.Printing.PrinterSettings.SetHdevmode(IntPtr)
at DHSPresentationLayer.Logic.PrinterAPI.OpenPrinterPropertiesDialog(System.Drawing.Printing.PrinterSettings, System.Windows.Forms.Form)
at DHSPresentationLayer.Logic.PrinterAPI.SendFileToPrinter(DHSPresentationLayer.Logic.PrinterInfo, System.String, System.Windows.Forms.Form)
at DHSPresentationLayer.Logic.PrinterAPI.PrintLabel(System.String, System.String, System.Data.DataTable, System.Func`2<System.String,System.String>, System.String, System.String, Int32, System.Windows.Forms.Form)
at DHSPresentationLayer.MRPFR130.showSSReport()
at DHSPresentationLayer.MRPFR130.confirmCancelCloseButton_Confirm()
at MINDBaseFormLibrary.BaseScreenReports.confirmCancelCloseControl1_EventButtonClicked(System.Object, DHSControlLibrary.MyEventArgs)
at DHSControlLibrary.ConfirmCancelCloseControl.OnEventButtonClicked(DHSControlLibrary.MyEventArgs)
at DHSControlLibrary.ConfirmCancelCloseControl.cmdConfirm_Click(System.Object, System.EventArgs)
at System.Windows.Forms.Control.OnClick(System.EventArgs)
at Infragistics.Win.Misc.UltraButtonBase.OnClick(System.EventArgs)
at Infragistics.Win.Misc.UltraButton.OnMouseUp(System.Windows.Forms.MouseEventArgs)
at System.Windows.Forms.Control.WmMouseUp(System.Windows.Forms.Message ByRef, System.Windows.Forms.MouseButtons, Int32)
at System.Windows.Forms.Control.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.Control+ControlNativeWindow.OnMessage(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.Control+ControlNativeWindow.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.NativeWindow.DefWndProc(System.Windows.Forms.Message ByRef)
at Infragistics.Win.UIAutomation.UiaProviderControlNativeWindow.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application.Run(System.Windows.Forms.Form)
at DHSPresentationLayer.Program.Main()
then 1 second after :
Faulting application name: DHSDEVASystem.exe, version: 7.8.0.4, time stamp: 0x54c8f680
Faulting module name: MSVCR110_CLR0400.dll, version: 11.0.50709.17929, time stamp: 0x4ffa580c
Exception code: 0xc0000005
Fault offset: 0x0000156e
Faulting process id: 0x8ec
Faulting application start time: 0x01d046916142e1e3
Faulting application path: C:\Users\savaa\AppData\Local\Apps\2.0\DR9VMJ96.MZ3\DP07HVCX.MDB\dhsd..tion_0000000000000000_0007.0008_cfa90b0813b3f063\DHSDEVASystem.exe
Faulting module path: C:\Windows\system32\MSVCR110_CLR0400.dll
Report Id: 38cf9363-b285-11e4-b29f-0023242a2561
The PC is on windows 7 32 bits with .net 4.5 installed.Hello,
Based on the exception message, I found that your project is build with .NET 4.0, you could consider changing it to .NET 4.5.
If you want to keep it built with .NET 4.0, then you could consider the following fix.
FIX: "Faulting module name: clr.dll" error message when you run a Microsoft .NET Framework 4-based application
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
EdgeAnimateCC2014 crash on win7 (faulting module libcef.dll)
Hi,
i'm just wondering if the win8(Edge animate cc crashes at startup on win 8.1) problem and remedy applies to win7?
Edge started crashing minutes after opening and working on a project, notably after i updated my nvidia driver because PhotoshopCC2014 wouldn't run unless i did.
My event log reads:
Faulting application name: AdobeEdgeAnimateCC2014Helper.exe, version: 0.0.0.0, time stamp: 0x5295bbb9
Faulting module name: libcef.dll, version: 3.1364.1130.0, time stamp: 0x5295b9b5
Exception code: 0xc0000005
Fault offset: 0x0003d7db
Faulting process id: 0xcd8
Faulting application start time: 0x01cfa0b37a2ae41d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Edge Animate CC 2014\cef\AdobeEdgeAnimateCC2014Helper.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe Edge Animate CC 2014\cef\libcef.dll
Report Id: cd6674e6-0ca6-11e4-9e8c-00268339bfef
System info:
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 08/03/12 14:55:01 Ver: 21.04
Processor: Intel(R) Core(TM) i7-3970X CPU @ 3.50GHz (12 CPUs), ~3.5GHz
Memory: 65536MB RAM
Available OS Memory: 65486MB RAM
Page File: 4816MB used, 126153MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Display info:
Card name: NVIDIA GeForce GTX 580
Manufacturer: NVIDIA
Chip type: GeForce GTX 580
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_1080&SUBSYS_00000000&REV_A1
Display Memory: 4047 MB
Dedicated Memory: 1487 MB
Shared Memory: 2559 MB
Any suggestions?
thx!
ianHi ,
To generate the crash dump on windows follow the steps :
01)Type regedit in command run to open the registry entries.
02)Add a new entry to computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Windows Error Reporting\Local Dumps\EdgeAnimate.exe
If any of the sun category doesn't exist , please create it.
03)Now add "DumpFolder" , "DumpCount" , DumpType" as mentioned in the link shared by Sujai - http://msdn.microsoft.com/en-us/library/windows/desktop/bb787181%28v=vs.85%29.aspx
i.e create DumpFolder entry of type REG_EXPAND_SZ and default value say c:\crashDumps where you have this folder crashDumps in the c directory
Take a look at the snapshot below :
After making these settings , relaunch Edge Animate and try to crash. This should generate the crash dump in the c:\crashDumps folder. Send that log file to us via dropbox.
Do let me know if you need any other help!
Thanks and Regards,
Sudeshna Sarkar -
8.02 POA crashes w/ntdll.dll fault after power loss
Hi,
Running GW 8.0.2 on Windows 2003 server (POA, MTA and GWIA). After power loss on Friday, POA will not stay up for long - crashes with:
"Faulting application gwpoa.exe, version 8.0.2.10840, faulting module ntdll.dll version 5.2.3790.4455" error.
MTA and GWIA are not crashing.
I thought maybe it could be a corrupt message but the only messages in the queues are dated today and not Friday (\PO\wpcsout\ofs\4 - wpcsin queues are empty). I am currently running gwcheck.exe against the message databases but that is going to take a couple hours. Any thoughts? Thanks.Originally Posted by DJMUGI
Hi, I'm reaching out to DJHess (and other forum members) - we are having nearly exactly the same issue (same version of GW, gwpoa.exe and ntdll.dll), POA does not stay up long (crashes after just a few hours) - but we did not have a power loss (that I am aware of). Was a solution ever determined for this issue? Did gwcheck.exe help (it does not for us)?
I am having the exact same problem. Below are the specs of my GroupWise servers:
GroupWise 8.0.2 (POA and MTA)
Server OS: 2008 R2 x64
The POA will randomly shut down with an ntdll.dll error fault. I have migrated this server to new hardware and a new OS (user to be on a 2003 R2 SP2 server and half the RAM). Same issue. Anyone have a fix for this?
Maybe you are looking for
-
I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a n
-
FLow of Purchase order TO Mail
Respected Members, I have a small requirement and i have to work on it. Please help me out. I will explain you the scenario. Right now what is happening that when i am creating a purchase order ,as soon as i click on Save button in Me21n tcode then a
-
Problem in Jdbc connectivity with Oracle8i!!
can you tell me, how can i connect jdbc with oracle 8i. i written a connectivity code with oci8. here is that two lines. Class.forName("oracle.jdbc.driver.OracleDriver"); m_conn = DriverManager.getConnection("jdbc:oracle:oci8:@qit-uq-cbiw_orcl","scot
-
GoldenGate - Oracle to MSSQL - handling DDL replication abends on replicat
Sorry for the cross-post. I clearly failed to actually read the "there's a GoldenGate forum" sticky... Hello - Very much a GoldenGate noob here, so please excuse me if I fumble on the terms / explanations - still learning. We've recently been lucky e
-
SAP BW Bookmarks - Metadata question
Hi, Our users save query views as bookmarks on the portal. Now , If we change the query defination , we would like to know following: 1. Bookmarks created against queries ( I found tables RSWR_DATA_XREF and RSWR_DATA . These tables give me list