Labview application crashes with a Dr Watson Access violation c0000005 in win2K service pack 2 and 3

The application was developed on a Dell Optiplex PIV 2GHz, 512 MB Ram using LabVIEW 6.1 Profesional Control Development Suite. The exe runs for between 10 minutes and 21 days before exiting with a Dr Watson Access Violation error 0xc0000005. The basic stack dump info is as follows:
Application exception occurred:
App: (pid=312)
When: 2/4/2003 @ 20:54:51.843
Exception number: c0000005 (access violation)
*----> System Information <----*
Computer Name: NO1
User Name: No1
Number of Processors: 1
Processor Type: x86 Family 15 Model 2 Stepping 4
Windows 2000 Version: 5.0
Current Build: 2195
Service Pack: 2
Current Type: Uniprocessor Free
Registered Organization: xxxxxxxxxxxx
Registered Owner: xxxxxxxxxx
*----> Task List <----* edited for brevity
312 xxxxxxx.exe
1056 drwtsn32.exe
0 _Total.exe
State Dump for Thread Id 0x38c
eax=78e34ff8 ebx=79288ab8 ecx=00000001 edx=78e338cc esi=78e34ffd edi=78e338d1
eip=3027bf0d esp=0012fc70 ebp=0012fc7c iopl=0 nv up ei pl nz na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000202
function: MoveBlock
3027bef7 fc cld
3027bef8 eb15 jmp CheckFPStat+0xe52 (3027ce0f)
3027befa 0fbae100 bt ecx,0x0
3027befe 7301 jnb CheckFPStat+0xa344 (30286301)
3027bf00 a4 movsb ds:78e34ffd=32 es:78e338d1=00
3027bf01 d1f9 sar ecx,1
3027bf03 0fbae100 bt ecx,0x0
3027bf07 7302 jnb CheckFPStat+0x654e (3028250b)
3027bf09 66a5 movsw ds:78e34ffd=3532 es:78e338d1=0000
3027bf0b d1f9 sar ecx,1
FAULT ->3027bf0d f3a5 rep movsd ds:78e34ffd=???????? es:78e338d1=00000000
3027bf0f 5e pop esi
3027bf10 5f pop edi
3027bf11 59 pop ecx
3027bf12 8be5 mov esp,ebp
3027bf14 5d pop ebp
3027bf15 c3 ret
The error is always "move block" and leads me to believe that it is a windows memory manager issue but I cannot resolve it. The application connects to an ethernet GPIB interface and to 10 Opto22 Ethernet brains via activeX. The processor runs about 25%, there are no apparent memory leaks, and there is at least 300Mb of free ram when the crashes occur. Any suggestions?
Thanks,
Ian

I am having the same issue with LabVIEW 7.1
From Dr. Watson:
Microsoft (R) Windows 2000 (TM) Version 5.00 DrWtsn32
Copyright (C) 1985-1999 Microsoft Corp. All rights reserved.
Application exception occurred:
App: (pid=2208)
When: 10/21/2005 @ 13:09:12.530
Exception number: c0000005 (access violation)
*----> System Information <----*
Computer Name: WEESUSCILPCWRM0
User Name: RDL
Number of Processors: 2
Processor Type: x86 Family 15 Model 4 Stepping 1
Windows 2000 Version: 5.0
Current Build: 2195
Service Pack: 4
Current Type: Multiprocessor Free
Registered Organization:
Registered Owner: Administrator
*----> Task List <----*
0 Idle.exe
8 System.exe
168 SMSS.exe
192 CSRSS.exe
188 WINLOGON.exe
240 SERVICES.exe
252 LSASS.exe
396 scardsvr.exe
472 svchost.exe
500 spoolsv.exe
568 dklog.exe
592 svchost.exe
616 FrameworkServic.exe
688 mcshield.exe
708 vstskmgr.exe
728 naPrdMgr.exe
844 regsvc.exe
860 mstask.exe
900 Smc.exe
1020 WinMgmt.exe
1048 Wuser32.exe
1076 CcmExec.exe
1188 dkcktkn.exe
1876 svchost.exe
916 explorer.exe
2172 shstat.exe
1988 tbmon.exe
1200 UpdaterUI.exe
2012 dkAutoReg.exe
2072 ERClient7.exe
1916 LabVIEW.exe
2288 notepad.exe
2284 notepad.exe
2208 WINWORD.exe
2424 agentsvr.exe
1900 DRWTSN32.exe

Similar Messages

  • Java.exe crashing with Dr Watson access violation at address 500bf974

    We have been sucessfully runing an application delveloped with JDK 1.2.2 on a Pentium III machine with Windows NT 4 SP5 (384Mb RAM). I have replaced the Pentium III machine with a pentium 4 with 1Gb RAM (still running NT4 SP5). In fact, I simply took the HDD out of the PIII and installed it in the P4.
    All applications work correctly (Sybiz Vision, MS Office 97 suite), however, when I go to run the java application is crashes and a Dr Watson Access Violation in java.exe error is generated.
    I have:
    1. Reinstalled the JDK 1.2.2.
    2. Confirmed that all hardware drivers (new NIC, Video and Sound Card) were updated with the appropriate versions from the hardware suppliers web pages.
    3. Read thru previous posts on this site (and others) for similar errors, but have only been able to find similar questions.
    4. Lowered the video card display colours to 256 rather than 65,536.
    None of the above have made any difference.
    I hope this question will prompt the java/Dr Watson gurus out there to help me resolve this frustrating problem.
    Thanks in anticipation.
    Greg

    Consider getting 1.2.2_014, or whatever is the latest version of 1.2.2. I think there were some issues with Pentium IV processors which were fixed in one of the later incarnations of the JDK.
    You can get the latest version of 1.2.2 from the following url:
    http://java.sun.com/products/jdk/1.2/download.html

  • Urgent problem: JRE Crashes with Access violation (c0000005)

    I have a problem where the JRE crashes with an Access violation (c0000005) at address (6d4218ce).
    The JVM is:
    java version "1.3.1_01"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_01)
    Java HotSpot(TM) Client VM (build 1.3.1_01, mixed mode)The application is swing based, and I have my suspicions that the problem occurs when exec'ing (Runtime.exec()) a script file (deletes data files and FTP's data files around an internal network), but I cannot categorically prove it as yet.
    The lack of a .map file does not help in analysing the Dr Watson log file. Does anyone know if a map file is available for 1.3.1?
    I have tried to raise this as a bug but as we cannot reproduce it on demand, I cannot get Sun to look into it.
    The Dr Watson log file shows:
    State Dump for Thread Id 0x13e
    eax=bf800000 ebx=0336b770 ecx=02b72168 edx=bf800008 esi=02b72168 edi=06ffd12c
    eip=6d4218ce esp=08d0fdbc ebp=08d0fddc iopl=0         nv up ei ng nz na pe nc
    cs=001b  ss=0023  ds=0023  es=0023  fs=0038  gs=0000             efl=00000282
    function: <nosymbols>
            6d4218b9 8d4df0           lea     ecx,[ebp-0x10]         ss:09c0e7e2=00000000
            6d4218bc e875000000       call    6d421936
            6d4218c1 5f               pop     edi
            6d4218c2 5e               pop     esi
            6d4218c3 c9               leave
            6d4218c4 c3               ret
            6d4218c5 56               push    esi
            6d4218c6 8bf1             mov     esi,ecx
            6d4218c8 8b5604           mov     edx,[esi+0x4]          ds:03a70b6e=????????
            6d4218cb 83c208           add     edx,0x8
    FAULT ->6d4218ce 8b4210           mov     eax,[edx+0x10]         ds:c06fea0e=????????
            6d4218d1 85c0             test    eax,eax
            6d4218d3 7f25             jg      6d4218fa
            6d4218d5 7d1b             jge     6d4218f2
            6d4218d7 83c9ff           or      ecx,0xff
            6d4218da 6a04             push    0x4
            6d4218dc 2bc8             sub     ecx,eax
            6d4218de 8b4608           mov     eax,[esi+0x8]          ds:03a70b6e=????????
            6d4218e1 d3e0             shl     eax,cl
            6d4218e3 8b4a44           mov     ecx,[edx+0x44]         ds:c06fea0e=????????
            6d4218e6 8d440807         lea     eax,[eax+ecx+0x7]      ds:03a70b6f=????????
            6d4218ea 59               pop     ecx
    *----> Stack Back Trace <----*
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    08d0fddc 6d4710ee 0336b734 0336b734 6d4381b7 0336b734 <nosymbols>
    State Dump for Thread Id 0x140
    eax=06a82398 ebx=00000000 ecx=06ab34f0 edx=00000000 esi=0000017c edi=00000000
    eip=77f682db esp=08d4fc24 ebp=08d4fc48 iopl=0         nv up ei pl zr na po nc
    cs=001b  ss=0023  ds=0023  es=0023  fs=0038  gs=0000             efl=00000246
    function: NtWaitForSingleObject
            77f682d0 b8c5000000       mov     eax,0xc5
            77f682d5 8d542404         lea     edx,[esp+0x4]          ss:09c4e62b=00000000
            77f682d9 cd2e             int     2e
            77f682db c20c00           ret     0xc
            77f682de 8bc0             mov     eax,eax
    *----> Stack Back Trace <----*
    FramePtr ReturnAd Param#1  Param#2  Param#3  Param#4  Function Name
    08d4fc48 77f04f37 0000017c ffffffff 00000000 6d466097 ntdll!NtWaitForSingleObject
    08d4fc90 6d476550 00000000 00000000 00000001 00765d80 kernel32!WaitForSingleObject Any help would be much appreciated.
    Regards,
    Dave Jackson

    Probably nothing to do with it but I had some dodgy memory, and windows would complain that there was an error to do with that exact memory location: c0000005

  • Application crash with error ntdll.dll 00018fea

    Hi,
    I have a problem with my app.exe build.
    I attach a simple code; the Vi open and close a TDM file.
    If I run this Vi in Labview works fine.
    If I build the application.exe on a notebook and I run it I got "Application crash with error ntdll.dll 00018fea".
    I've tried to build the Vi on another Pc Desktop with Labview and here if I run the exe it works fine.
    On the two PC I have LV8.5; the build options are the same.
    On the notebook I've try also to reinstall LV8.5 but I got the same error.
    Can you help me?
    Thanks a lot
    Attachments:
    open tdm.vi ‏33 KB

    MicheleS wrote:
    This morning I've try to put the ntdll.dll of the other PC in the notebook but the problem remain.
    Never ever do that! You were very lucky that both ntdll.dll files were probably the same version so the exchange didn't do much but ntdll.dll is one of the core Windows DLLs were everything goes through that normal applications may access in Windows. A mixup in such a part because of incompatitible ntdll.dll with other system API DLLs might prevent your computer entirely from starting up even in safe mode.
    You should not attempt to ever switch system DLLs between different computers. In such behaviour lays insanity. If you expect a system DLL to be corrupt attempt to do a repair installation instead. Also Windows nowadays has techniques to detect if a system DLL got corrupt and will attempt to repair it, though I guess if ntdll.dll would go belly up it's likely your computer won't even start up.
    Rolf Kalbermatter
    Message Edited by rolfk on 01-14-2008 08:05 AM
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Application crashes with timesten database  over  OCI connection

    Application crashes with timesten database over OCI connection
    #0 0x405e09f8 in kpudsany () from /home/oracle/TimesTen/ratingtt1121/ttoracle_home/instantclient_11_1/libclntsh.so.10.1
    #1 0x405728d0 in OCIDescribeAny () from /home/oracle/TimesTen/ratingtt1121/ttoracle_home/instantclient_11_1/libclntsh.so.10.1
    #2 0x43748a5a in GDBociDriver::StoredProcArgumentList () from /home/omni/library/libgfr_dboci.so
    #3 0x4374e865 in GDBociDriver::StoredProcCallFormat () from /home/omni/library/libgfr_dboci.so
    #4 0x4376ec9a in GDBociDriver::ExecuteStmtBind () from /home/omni/library/libgfr_dboci.so
    #5 0x4376fc69 in GDBociDriver::Execute () from /home/omni/library/libgfr_dboci.so
    #6 0x436ba240 in GDBstatement::Execute () from /home/omni/library/libgfr_dblayer.so
    #7 0x43736106 in GDBociDriver::SetModule () from /home/omni/library/libgfr_dboci.so
    #8 0x4366cb22 in GDBconnectionPool::GetConnection () from /home/omni/library/libgfr_dblayer.so
    #9 0x4367a9db in GDBdriver::LoginConnectionGet () from /home/omni/library/libgfr_dblayer.so
    #10 0x4373dbaa in GDBociDriver::Login () from /home/omni/library/libgfr_dboci.so
    #11 0x4377380f in CreateOCIDriver () from /home/omni/library/libgfr_dboci.so
    #12 0x4367bb2a in GDBdriverLoader::CreateDriver () from /home/omni/library/libgfr_dblayer.so
    #13 0x436d423d in IGDBdriverMgr::GetDriverAndLogin () from /home/omni/library/libgfr_dblayer.so
    #14 0x436d4da1 in IGDBdriverMgr::GetDriver () from /home/omni/library/libgfr_dblayer.so
    #15 0x436a5071 in GDBserverDef::InitialLogin () from /home/omni/library/libgfr_dblayer.so
    #16 0x433247cc in CcapAdbAccess::Init (this=0x9e85a88) at CcapAdbAccess.C:161
    #17 0x43331c44 in CcapMain::Run (this=0x434eeb80, sdpId=2, processName=0x9dae29c "URE61_O2") at CcapMain.C:132
    #18 0x080947d1 in ccap_thread (arg=0x0) at main.C:1588
    #19 0x080e7bd2 in ThreadManager::WrapperRoutine (ipArg=0x9e84fc0) at ThreadManager.C:176
    #20 0x0035f44a in start_thread () from /lib/libpthread.so.0
    Timesten has some limitations and it says:
    Describing objects with OCIDescribeAny() is supported only by name. Describing PL/SQL objects is not supported.
    home/omni/library/libgfr_dblayer.so
    Cloud you please tell us whit might be the reason for this

    Are you able to provide exact details of the OCIDescribeAny call being made by the application (including parameter values)?
    Chris

  • Applications crashing with dyld error messages: CFURLStorageSessionGetDefault

    All was working fine (been told to hold off on updates so have not installed them, yet I am running 10.6.8 [10K549]).  Suddenly after a reboot applications crash with the same error:
    Dyld Error Message:
      Symbol not found: __CFURLStorageSessionGetDefault
      Referenced from: /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
      Expected in: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
    Can not open Terminal.  Can not open Skype (removed 2.x version, downloaded latest 5.3.59 and installed), can not run Evolution (starts, but when clicking a message same error).  Attempted to install 10.6.8 bundled update (manual download), but when selected to open get yet again - the same crash error.
    Was able to create a new user and same issues with that account.  Any help?!

    My system has a PGP encrypted disk (so no booting from CD to fix).  It appears that one of Apple's AUTO updates (though I have them manually turned off!!) has screwed my system to the point of making the OS show up as a version that is not running.  Due to the versioning not being right the applications crash.  The verdict: rebuild.
    So yeah, this *****.

  • I have ios7 on my iphfone 4 I now have a iphone5 with ios8 I cannot access the cloud to download my contacts and apps.  the error is both phones need to be ios8,  my iphone4 will not allow changing to ios8.  can anyone help.  Thanks

    i have ios7 on my iphone 4 I now have a iphone5 with ios8 I cannot access the cloud to download my contacts and apps.  the error is both phones need to be ios8,  my iphone4 will not allow changing to ios8.  can anyone help.  Thanks

    Contact Apple and speak to someone in account security.

  • Firefox crashes with error msg: plug-in container exe has encountered a problem and needs to close. Mod name: Mozallac.dl

    Firefox crashes with error messages: plug-in container exe has encountered a problem and needs to close. Details: Mod User 32.0.3.5379 Mod Name: mozallac.dl
    Why does this constantly occur?

    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences'''<Enter> in the address bar
    Select '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • Hi, I download the latest version of itunes and i have problem now to sync my iphone with my computer, I have windows 7 home premium service pack 1, can somebody tell me how to fix it. thanks

    Hi, I download the latest version of itunes and i have problem now to sync my iphone with my computer, I have windows 7 home premium service pack 1, can somebody tell me how to fix it. thanks

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
    Regards.

  • Office 2013 SP1 is here - when will Access 2013 Runtime get the service pack?

    Office 2013 SP1 is here - when will Access 2013 Runtime get the service pack? ie. When will we see Access 2013 Runtime Service Pack 1?

    Hi,
    There has no exact information about the Access 2013 Runtime Service Pack 1 now. We can continue to pay attention about it in the Microsoft Official website.
    Regards,
    George Zhao
    TechNet Community Support

  • Please guide the path in Service Market Place to find CR2008 latest Service Pack and CR2013 latest Service pack with Visual Studio integration

    Please guide the path in Service Market Place to find CR2008 latest Service Pack and CR2013 latest Service pack with Visual Studio integration for CR2013; I have S userID  and log in; but could not locate the place to download

    Hi,
    I believe you are right!, The support portal is Showing Crystal Report for VS not the other one; 
    Our S User ID is out dated might be; It was created when CR 2008 was purchased. But we bought CR2011 license recently  as mentioned below.
    Below is the product purchased by our organization
    CR 2011 INTL UPGR WIN NUL LICENSE - 1 to 2 Licenses, mix and match.
    Does this version have maintenance rights?
    I tried registering at Service MarketPlace hoping to get new S-User ID; Am i right path to get the new S- USerID ?
    During registering it asked for "Customer or Installation Number (1) *" ; Where can i get this info or number; Kindly suggest

  • Santa Rosa MBP Application Crashes with EXC_BAD_ACCESS (0x0001)

    I am having Application crashing problems with my brand new Santa Rosa MBP that arrived today. This machine is a 2.4 GHz 17" MBP with Hi-Res Glossy display and it came with 2 GB of RAM. I upgraded it to 4 GB but this problem occurs with the original chips or the new 2 x 2 GB chips.
    So far the applications that crash are Pages, Keynote, Aperture, Parallels Desktop, and iWeb. Other things I have tried are all right for now. Excerpts from the CrashReporter log of Aperture are below. All applications are crashing with an identical EXCBADACCESS (0x0001) and KERNPROTECTIONFAILURE (0x0002) at ... (this number differs for individual applications). Any ideas?
    Bryan
    Host Name: brycv
    Date/Time: 2007-07-05 20:49:02.460 -0700
    OS Version: 10.4.10 (Build 8R2232)
    Report Version: 4
    Command: Aperture
    Path: /Applications/Aperture.app/Contents/MacOS/Aperture
    Parent: WindowServer [82]
    Version: 1.5.3 (1.5.3)
    PID: 1196
    Thread: 0
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
    Thread 0 Crashed:
    0 <<00000000>> 0x00000000 0 + 0
    1 com.apple.Aperture 0x00003149 0x1000 + 8521
    2 com.apple.Aperture 0x0000323e 0x1000 + 8766
    3 com.apple.Aperture 0x0000336e 0x1000 + 9070
    4 com.apple.Aperture 0x0000294e 0x1000 + 6478
    5 com.apple.Aperture 0x00002875 0x1000 + 6261
    Thread 1:
    0 libSystem.B.dylib 0x900248c7 semaphorewait_signaltrap + 7
    1 com.apple.ColorSync 0x915a86cf pthreadSemaphoreWait(t_pthreadSemaphore*) + 35
    2 com.apple.ColorSync 0x915c2de0 CMMConvTask(void*) + 60
    3 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 2:
    0 libSystem.B.dylib 0x900248c7 semaphorewait_signaltrap + 7
    1 libGLProgrammability.dylib 0x9418afdb glvmDoWork + 150
    2 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 0 crashed with X86 Thread State (32-bit):
    eax: 0x010f7020 ebx: 0x92b217da ecx: 0x01872000 edx: 0x00000011
    edi: 0xbffffbd8 esi: 0x01872000 ebp: 0xbffffc08 esp: 0xbffffbdc
    ss: 0x0000001f efl: 0x00010246 eip: 0x00000000 cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    MacBook Pro 17" 2.4 GHz   Mac OS X (10.4.10)  
    MacBook Pro 17" 2.4 GHz   Mac OS X (10.4.10)  
    MacBook Pro 17" 2.4 GHz   Mac OS X (10.4.10)  

    I am also having this problem with Adobe Bridge CS3, and QuickTime but only if I try to open a video file. It seems to be a problem when I access anything that wants to deal with the video hardware in the machine. I am planning on calling Apple tomorrow but any help would be appreciated.

  • Labview application crash

    Hi
    I have a labview application which generates an Access violation (0xc0000005).
    Unfortunately it appears to crash at different points in the program execution.
    The program is running an ESS task and has usually run serveral temperature cycle before it crashes. Other times it runs fine.
    Looking at task manager, its not running out of memory.
    Its not accessing any network location. 
    Everything is contained within the EXE except for some VIs which are called dynamically and these VIs are contained in a LabVIEW packed library and installed on the same drive as the application.
    I was hoping the log file would provide some useful information that would point to the problem
    see attached
    #Date: 07 Aug 2015 15:56:41
    #OSName: Microsoft Windows XP Service Pack 3
    #OSVers: 5.1
    #OSBuild: 2600
    #AppName: ???_Test_Suite <<<<<removed filename details
    #Version: 11.0.1f1 32-bit
    #AppKind: AppLib
    #AppModDate: 07/08/2015 14:59 GMT
    #LabVIEW Base Address: 0x30000000
    07/08/2015 16:56:23.134
    Crash 0x0: Crash caught by NIER
    File Unknown(0) : Crash: Crash caught by NIER
    minidump id: 1b0d01ab-3630-4f28-957d-758aaf53e606
    &#25;ExceptionCode: 0xC0000005§&#7;N
    0x3072D954 - lvrt <unknown> + 0
    0x3072DD08 - lvrt <unknown> + 0
    0x7C37FDB4 - MSVCR71 <unknown> + 0
    0x7C843E82 - kernel32 <unknown> + 0
    0x00000000 - ???_Test_Suite <unknown> + 0  <<<<<removed filename details
    *** Dumping Bread Crumb Stack ***
    *** LabVIEW Base Address: 0x30000000 ***
    #** DisposeInstrument: "C:\####\common\Instruments.lvlibp\Public\cal 8722.vi\9"   <<<<<removed path details
    #** VILinkObjRemoveCore: "C:\####\common\Instruments.lvlibp\Public\cal 8722.vi\9"  <<<<<removed path details
    *** End Dump ***
    The reference to the lvlibp vi in the lvlog file make no sense as 'cal 8722.vi' wouldn't have been loaded during the ESS routines.
    Are there any tools available that would make the dmp file a bit more readable?
    Any sensable suggests welcome.
    Regards
    Ray Farmer
     

    It seems to me that the issue is coming from some sort of memory violation. It's possible that a certain process is running out of virtual memory. Have you also tried checking the cal 8722.vi to ensure that it works correctly? I know that it's not being called but if it is mentioned in the error report then it's definitely worth making sure it works.
    Additionally, make sure all of your references are being closed properly. It could be that if the program is (or was) stopped suddenly, perhaps using the abort button instead o the stop button, that the references are still open and that is causign the issue.
    What does your program look like? If you attach the code I may be able to more easily determine the cause of the error.
    Regards,

  • Application Crashes with Problem Event Name:BEX64 and Fault Module Name:MSVCR110.dll

    After building my application in VS2012 Update 4 ,application started crashing with the below mentioned problem signature.
    Problem signature:
      Problem Event Name: BEX64
      Application Name: App.exe
      Application Version: 1.0.0.1
      Application Timestamp: 52fdbd9d
      Fault Module Name: MSVCR110.dll
      Fault Module Version: 11.0.51106.1
      Fault Module Timestamp: 5098826e
      Exception Offset: 000000000006d4f9
      Exception Code: c0000417
      Exception Data: 0000000000000000
      OS Version: 6.1.7601.2.1.0.274.10
      Locale ID: 1033
      Additional Information 1: 1032
      Additional Information 2: 103247eabca85d12954263c679d66e19
      Additional Information 3: 7fa2
      Additional Information 4: 7fa2470b0fea6279055c0db583abca71
    Any help is appreciated.

    Hi,
    To debug this kind of issue, we recommend you to post in MSDN forum because they are more familiar with developing and debugging app:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

  • Application crash with message "Hidden Wnd that Fires connection points"

    Our Swing application regularly crashes with a Windows error message popup.
    Title: "Hidden Wnd that Fires connection points: javaw.exe - Application Error"
    Message: The instruction at "0x7c912905" referenced memory at "0xfffffff8". The memory could not be "read". Click on OK to terminate the program. Click on CANCEL to debug the program."
    Our logfile contains SystemOut, SystemErr and log4j entries and shows nothing. Also no hs_err_pid is written to the file system. Google did not find anything when searching for the message box title.
    Environment:
    Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
    Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode)
    Microsoft Windows XP [Version 5.1.2600]
    Does anyone have an idea what could cause such a problem?

    How do I check if NIO is running non-blocking mode ? I am reusing a tcp/ip basic class (provided with my embedded interface chip) which does not mention it being either way.
    I only tried in browser. I have to add code to handle the applet viewer case. it crashes in every browser I tried and has no console dump in any. I put it together quickly for a customer and did not add debugging messages in the code since it was provided and working...
    Gotta go do that now.
    Thanks

Maybe you are looking for

  • I want to add image name with the extension to db after upload, Can any body help?

    Hello there, Earlier in the week I created PHP photo/image upload form so clients will be able to upload to my site, it worked very well uploading image to designated directory to the C:/path/ but there is more that I would like to do with the form,

  • Can't sign into Folio Builder CS6.

    Hi. I have been strugling with this issue all day. I am currently on Adobe Indesign CS6 (Not the cloud version) and I installed Adobe Folio Builder successfully. Everything works fine except that I cannot sign into folio builder. When I click on the

  • IDOC and BD87

    Hello everybody Is it possible to delete whole IDOC segment in DB87? I can't find such possibility... Ore maybe someone know different transaction, which allow to delete segment and read IDOC again, but not create new IDOC number (similar to WE19, bu

  • Material ledger period-end closing - material selection based period status

    Dear SAP Experts, The OSS note 980475 describes functionality of excluding materials without inventory and postings from the period-end closing of the material ledger. The system assigns a new period status for materials without inventory and posting

  • Expression language problem

    <c:set var="test" value="${20+1}"/> <c:if test = '�{param.page = 21}'> </c:if>hi i have to do some calculations when param.page equals 21. but it never reaches the code inside teh if condition although the parameter im using is 21 but still not worki