Labview/ATE Eng

I have an opening in the Central PA area for an ATE Engineer with Labview. It is a direct Hire Position. If you are interested please forward your resume to me at
[email protected] Thank you for your time.

Is this position still open?

Similar Messages

LabVIEW /ATE Engineer

I have an opening for
an ATE Engineer with Labview. If you
are interested please forward your resume to me at [email protected] . Thank you for your time.
CLA 2014
CCVID 2014

Hi ,
Punit
I am Brijesh patel.
I am CLAD, I am Working With Nutron Systems(Ahmedabad).
We have developed custumise SCADA application using Labview (We didnt Used DSC module) But we developed Such kind
of Scada. Which can aquire data using serial , TCP/IP protocol. As back hand we used Exel as well as sql.
Brijesh Patel
Brijesh Patel
Application Engineer,
Nutron Systems,
Ahmedabad

LabView ATE Test Developer

Required:
* Labview experience (3 year minimum)
* ATE experince
* Working experience from a test group (5 year minimum)
* M.Sc.EE or similar.
Preferred/strong plus:
* Experience designing tests from a datasheet
* Experince with statistical analysis of test results (yield analysis)
* Background in chip testing
* HP/Agiline Smartest knowledge/experience
Start: ASAP (Jan/Feb-06).
Duration: 12-18 mo. Full-time on-site.
Location: Denmark.
Hourly rates: EUR 50-70.
I need CV asap. Direct contact: ro (at) axcon.dk.
Read more about Axcon on www.axcon.dk
BTW: Also looking for HP/Agilent Vee programmers.

Mit CV for stilling er her.
Med Hilsen

Multiple LabVIEW Test Eng Positions-Contract and Direct: NJ with Clearance (Need is IMMEDIATE)

Symtx Inc, a custom system company is looking to fill multiple roles on site in NJ.
Requirements:
Current Security Clearance (active or inactive)
3-10 years LabVIEW experience
Strong HW background as well-debug, integration
Strong Communication skills and a go getter with an established track record of rapid development.
Positions: Contracting in NJ at appropriate rate for duration of job
or Direct Hire to Symtx. Individuals considered for this would be interviewed in Austin and NJ. After the time in NJ, transition to Austin would be arranged for qualified candidates.
Need up to four positions filled by Feb 15.
To Apply go to:
http://www.symtx.com/ to apply for positions. Detailed job descriptions available end.

Edit
Jeff

3 years exp. in LabVIEW,ATE....looking for job.

thats it for now....
Attachments:
vivek's resume.pdf ‏44 KB

我们现有一项目需聘兼職LabVIEW工程師，有意请电邮：[email protected]

Driver install don't detect Labview 2013

Hello,
After installing Labview 2013 (32bits) , installing driver (Daqmx,etc...) (DVD feb.2013) , application driver don't detect labview 2013, and doesn't want install anything.
Do you know this problem ? and how can i fix ?
Thanks.
Ludovic
Windows 7 32bits
Labview 2013 Eng 32bits
Devices drivers DVD4 feb.13 (also try with Aug12 version)

Hello,
Thanks for answer,
I can't find link for download devices drivers August2013... Exist ?
(@Julien..) Your download link is Labview 2013 download application, but don't contain drivers (i.e. DaqMx)
In other link for download Labview (2013), ( https://lumen.ni.com/nicif/confirmation.xhtml ) recommended download devices drivers is August 2012 ... (http://joule.ni.com/nidu/cds/view/p/id/3145)
Best regards
Ludovic

ATE Engineer with LabVIEW Position Open

Moog Aircraft Group Salt Lake Operations has several immediate openings for Test Engineers with the following experience:
6+ years ATE experience, including real-time technologies, as applied to complex component simulation and control solutions.
Working knowledge of National Instruments LabVIEW™.
BSEE or BSCS required.
Previous exp with avionic systems and the various interfaceBSEE, BSCS s between aircraft electronics and actuation hardware (i.e. electro-hydraulic and electro-mechanical actuation systems).
Possess a working knowledge of industrial and avionics bus architectures (e.g. ARINC-429, MIL-1553, RS-422/485, RS-232, USB, IEEE-1394, etc.). Work skillfully with various sensors and transducer signal conditioning (e.g. LVDTs, RVDTs, resolvers, pressure sensors, potentiometers, etc.).
If you are interested in this position, please send resume to [email protected]

Attachments:
CV_Giridhar Rajan.doc ‏50 KB

Driver for Labview for ATE-100 pressure calibrator from Ashcroft Inc

Guys,
I need a subVI to communicate a pressure calibrator model ATE-100 from
Ashcroft (http://www.ashcroft.com/products.cfm?doc_id=348) with a
Labview application. The equipment has been originally shipped with and
old exe file supposed to do the job, nut I could not manage to make it
run. So I was searching for a way to exchange data it reads with the
Labview application I am writing. It seems to be standard RS-232
protocol.
Can anyone help or give me some hints?
Thnaks a lot,
Pixinguinha

The NI Instrument Driver Network doesn't have an instrument driver for this unit, so it looks like you're going to have to write your own drivers. You will, of course, need the programming manual from the manufacturer. This isn't all that difficult as there are tons of examples. You can just pull down, say, an instrument driver for a multimeter with a serial interface to see how it's done. To just try out serial communication you can use the "Basic Serial Write and Read" available in the LabVIEW examples. From the LabVIEW menu select Help->Find Examples. Change to the "Search" tab and enter "serial" in the search box. You'll get several examples.

Convert these VIs ZLibInflate,ZLibDeflate of LabVIEW version 5.0 into LabVIEW 2009

Convert these VIs ZLibInflate.vi,ZLibDeflate.vi of LabVIEW version 5.0 into LabVIEW 2009

Hi priyash,
you should be able to download them with the VIPM.
Mike

LabView 5.1 support of non-English languages

I need to display the User Interface VIs in 5 European languages: French, Italian, Spanish, German and Portuguese. The problem is with the special characters of these languages.
When I tried to copy a string containing a special character from a normal Word document to a Label in VI, the special character was displayed as ? (question mark)
The same happened when I tried to use import string mechanism. The special characters in the imported strings were displayed as ?.
Doesn't LabView support other languages?
I saw that fonts has style (Such as Times New Roman) size and script which specifies the language.
Maybe I can use fonts which are single language? If this is the solution, can you tell me where I
can find such fonts.
Thanks a lot!!!

See yesterday's discussion for an answer.
You are most likely copying unicode (M$ sence of it) characters from Word. Try to see it using HEX display option of the string control. If it has 2 bytes per symbol, so this is unicode I think.
Next open exported strings file and check font names in it. Then check fonts actually set for the wrong label. Don't use label, use Caption instead, BTW.
Discover which fonts you are using in Word document(unicode or not). Then you can try to export/save text as an ASCII file. I don't remember which is an exact file type for it in MS Word, Don't using it at all. Then open it in ,say notepad
and try again.
Another way to try is to use non unicode font to format your text and then try to copy it again (depends on Windows)
As a quick workaround you can see if the first byte of symbol is 0 or not. If so, just remove it and you'll get normal english text. If not, you can use divisor number, which will be different for the each language. This is clear from the unicode table (2 bytes). If you'll reach this place, let me know I'll try to help how to calculate it.
Hope that unicode is a reason of this behaviour.
P.S. You can determine unicode by open fonts folder and double klicking to fonts. If you see boxes instead of some groups of symbols, so this is most likely unicode (I don't insist on correctness of this way. On my WinNT box this works).
Sergey

LabView, Storing in array some dynamics variables (ENG - FR)

(Version française plus bas)
Hello,
I have made a tiny .vi for using DAQ USB in analog acquisition of sine.
I want to store each step of test in one array. But when I start a new measure , it erase the old one.
Sorry for my bad english
Bonjour,
Je suis actuellement entrain de mesurer des dephasages grâce au DAQ de LabView. J'aimerai sauver mes différentses phases de test dans un tableau mais à chaque nouveau test les valeurs sont écrasées.
Merci d'avance pour vos conseils
Solved!
Go to Solution.
Attachments:
Aquis_boucle_liught.vi ‏142 KB

The stop button does not work because you have a dataflow problem. The stop button gets read exactly once at the start of the program, and then never again because the inner loops never stop. Once the inner loop starts, the outermost loop does not iterate until all inner loops have completed. This also means that the stop button will not get read. If you want a button to get the updated value inside an inner loop, the terminal needs to be inside the inner loop.
If all three of your buttons are off, you have three inner loops that execute empty cases, each as fast as the computer allows, consuming all available CPU. The loops need a small wait. See also.
You really need to learn about dataflow and design patterns. You code could be simplified dramatically. It is way to chopped up and inside out.
LabVIEW Champion . Do more with less code and in less time .

Conection between Measuremet Automation Explorer and Labview (eng)

hello to all
I built a test stand with three "card's" with the assistance of MAX (Measure & automation Explorer) virtual,
Now I want to make the following.
I want to write in Labview the name of some of cards. Of such form that soon Labview says to me. In where is this card and his data (information, chanel number, card number etc).
As I can make the inquiry, between Labview and max. It is possible using of Labview?.
Can I get these data with Labview without inquiry on MAX?
The goal of this program, it is to be able to identify the cards that are had installed, without having to use MAX.
can be solved to this problem using activex or Visa?. I believe that Visa requires of a hardware,but I am working with simulations ( I don't have a hardware).
[email protected]

Depending on what kind of "cards" you are using the ModInst vi's my do what you want. They work with NI-SCOPE, NI-FGEN, NI-HSDIO, NI-DMM, NI-RFSG, and NI-SWITCH cards and will tell you the what of these devices you have installed, their name and attributes. If your cards use different drives you will need another solution.
Brian

HCL America Needs: ATE, Labview/Teststand Engineer: Lake Forest, CA

Domain: RF/Communication/SATCOM (Aerospace industry)
Required Skills:
- Labview
- Teststand
- SQL
- MS Access
- RF / Antenna knowledge
Forwared responses to: jc[dot]hcltech[at]gmail[dot]com.

Dear Sir/ Madam,
I am writing in response to your job notification for Embedded Testing.
I am a B.E ECE with an aggregate of 7.73% marks.
- I have good knowledge of programming languages like C, C++, Embedded C,Assembly and Basics of LABVIEW.
- I’m compatible on working various operating systems like Linux, windows, etc.
- I have also done 6 months internship from Electro System Associates(ESA) Bangalore.
Also I have an Experience in the Field of Testing and Measuring Instruments.
I am from Electronics background .Please provide me an opportunity .
Some of my personal qualities which you may find useful for this role are:
- Ability to learn quickly coupled with innovative ideas for problem solving
- Ability to work in a team with strong communication skills
- Hardworking and sincere towards work with an ability to take directions
Please find my detailed CV for your consideration. If you need any more details, please let me know.
Thanking you for your time and looking forward to hear from you.
Sincerely
Gopinath.s
Ph:9535569115

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

LabVIEW Position in Bangalore, India

We Are going through the second round of hiring to add to our existing team of LabVIEW Engineers who are based in Bangalore.
The Job Details are as follows:
Job Title: Systems Engineer (Test Software and Integration Group) or Senior Systems Engineer (Test Software and Integration Group)
Locations: Bangalore, India
Salary/Wage: Industry standard
Status: Full Time, Employee
Relevant Work Experience: 2 to 5+ Years
Career Level: Intermediate to Experienced (Non-Manager)
Education Level: Bachelor's Degree
Required
Proficiency in LabVIEW 8.X
Familiarity with NI TestStand
Familiarity with National Instruments Hardware interfacing (NI DAQ – IMAQ etc)
Experience in Design and Implementation of Test Software including integration
Experience in ATE usage and development
Requirements generation and review experience
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills In English
Desired
LabVIEW-based Object Orientated Programming
MS Project
UML
Experience executing verification and validation for projects
Experience generating and/or reviewing cost proposals
The Contact information is as follows:
Sri Ranjini
C V HR /FACILITY ASSISSTANT VI Engineering Solutions Pvt Ltd V A L U E I N T E G R I T Y
No. 16 , Curve Road, Tasker Town,
Bangalore - Ph: 080 - 41132277 / 76.
E-mail : - [email protected]: [email protected]
Website : - [email protected]
Note: If you have already been interviewd recently (in last 6 months) for a similar position at VIE-Bangalore office, please do not respond to this post.
Thanks.

Dear Sir/Madam,
I saw the opening for this job position in your website. I am highly interested in this project. I am perusing Master in Technology in electronics and communication (Optoelectronics and Optical Communication) from the University of Kerala, Thiruvanthapuram, India and currently doing a project “ Automation of laser cooling set up towards precision experiment with the help of labview” at Raman Research Institute, Bangalore, India (Jan – Nov 2009). In this project I used DAQ card and IMAQ. I have completed my B.Tech Degee in Electronics and communication in 2007,Cusat university, Kerala, India.
             I look forward to hear from you soon. I am attaching my resume with this cover letter..Thank you ahead of time for your kind attention.
                                                                                                                      With Regards,
                                                                                                                      Umadevi.P.C
                                                                                                                      [email protected]
Attachments:
NIJILA-4.doc ‏49 KB

Labview/ATE Eng

Similar Messages

Maybe you are looking for