Labview Built Executable - Long Runtime Startup Time

Hi All,
I have a LV 2011 SP1 application that has been built (executable) on a development machine running Windows 7 Professional. The application is copied to the target runtime machine. This machine has the LV 2011 runtime plus other DAQmx pre-requisites. The target machine is also Windows 7 Professional, an quad core @ 3.3GHz Xeon machine that, on paper, is significantly faster than the development machine.
I run the built application on the development machine. It takes around 1-2 seconds for the Startup VI Front panel to show. The application loads and runs. So far so good.
I run the built application on the runtime machine. It takes just over 90 seconds for the Startup VI Front panel to show. The exe process during this time is showing 0% CPU usage and a very small memory footprint (around 32MB). Eventually the Startup VI is shown and CPU usage and Memory consumption climb almost immediately to around 2% and 80MB. This is normal. From this point on the application runs as it should.
My question - why does the application startup time so dramatically different on the target machine? Is there some other startup process inherent in the runtime engine that is taking longer? I have tried loading the evaulation version of Labview 2011 SP1 on the target machine but this appears to make no difference. I know that this delay is more an annoyance than a show-stopper but my clients are asking questions and it would be good to provide some answers.
Some basic web searches have revealed others having similar problems and often the problem is related to some Windows service or other. I have also disabled the firewall on the target PC (though it is not connected to the internet, just a small IO network with ethernet chassis CompactDAQ modules) with no apparent difference. Unfortunately I cannot disable the virus scanner due to company policies.
Thanks for your help all.

I have been having this problem and it is very annoying. I am unable to figure out what exactly is slowing load time of an exe in a target machine. My target machines (3 of them) are not connected to the network. I have LabVIEW 2012 and am pretty sure all drivers daqmx,VISA, and Runtime have been installed correctly.
I have noticed this issue isn't there when the entire development environment is installed. To troubleshoot, I am using my personal laptop as test site (because I can't travel to other cities to fix it without knowing the solution), and my laptop has no previous installations of LabVIEW. I install the application and drivers using the installer I build, but it is exhibiting the same behavior. I must note here that I did not see this problem for LabVIEW 2010 that I was previously using, but my application design has changed. Nonetheless, I have checked the functionality of my application and am absolutely sure it has nothing to do with slow load times.
I am beginning to suspect some component has a bug in it for LabVIEW 2012 but, I am in no position to validate that. Is there anyone that has found a concrete solution that has made their application open instantly and run?
Thanks a bunch!
V
I may not be perfect, but I'm all I got!

Similar Messages

(My Labview built executable) has encountered a problem and needs to close.

All,
I've built a labview executable that interfaces with GPIB and the Texas Instruments EV2300 via USB.
The VI runs beautifully on the development machine, and I built the VI into an executable and it runs fine on the development machine. So I built an installer that installs the Labview 2010 runtime environment on the target computer. I ran the installer on a production line computer that I know can run GPIB and the EV2300, but when I try to start the executable I get an error that says "(your application) has encountered an error and needs to close."
I can get labview executables that don't talk to GPIB or USB to run on the target machine, so it's not the runtime environment. And I have VB6 applications that can run the GPIB and EV2300 interfaces without a hitch.
I'm not doing anything weird with the file paths in my program, just creating paths from strings using the canned VI for converting strings to paths. In the course of the program, I read a few text files and write one.
Is there anything I need to know about how to build an application with an installer? I need to get this up and running so the test program can run on a production line.
Ro ma wa ichi ni chi ni shi te na ra zu
Solved!
Go to Solution.

RTSLVU wrote:
I can get labview executables that don't talk to GPIB or USB to run on the target machine, so it's not the runtime environment. And I have VB6 applications that can run the GPIB and EV2300 interfaces without a hitch.
Sounds like a VISA problem. Download and install the latest VISA runtime on the target machine.
Ditto that! At least One of the installed drivers on the target does not have LabVIEW 2010 support. Check MAX and NI.com to resolve all the drivers on the target that have no support for 2010.
And yes, you may need to re-qualify the pre-existing exe's- if their code changes to use the new drivers If you are in a heavilly regulated industry. If so, It might be easier to build in an older LabVIEW version. Very sad- but it might even be simpler to incorporate the Unit Test Framework to handle regession testing of older code with newer drivers.
Worse- What if the exe's were built with a legacy version of LabVIEW that is no longer supported by the latest Drivers?
Time to start thinking of life cycle maintenance plans- with a 5 year upgrade required!
Jeff

Create an API to Launch an LabVIEW Built Executable and Pass it Input Parameters

Hello,
I'm looking for a way to create an API to Launch/Close an executable, created with LabVIEW, which in additional to Launching/Closing tht executable, will also allow me to pass input parameters.
To give you some background, I'm working on a logging utility, basically a background dameon, which I currently have implemented as a LabVIEW packed library and my API is a few VIs to launch that daemon and pass it a filename and a logging rate. Functionally it works just fine however is executes within LabVIEW not as an independent process. So instead of using a packed library, I would like to compile my logging daemon down to an executable but I still need a way to launch it and pass it parameters from an external application (such as Teststand).
I know you can launch executables and pass parameters using windows command lines, but I'm wondering if there is a more direct method such as a DLL that I could call in Teststand? Thanks.
Post CLD and when I'm a CLA when someone asks who I am, I can spin around in my chair and say "I am... the architect."

When Teststand Launches the Logger, it does so by opening a reference to the logger daemon using the "Open VI Reference" primitive and then it launches an instance of the dameon using the "Start Asynchronous Call" node.
This currently, launches the logger within labview not teststand. If I were to directly call the logger daemon VI itself as a step in TestStand, then it could run in a new teststand thread. At that point I would need a way to stop that logger which I should be able to do by storing a reference to its control queue within the teststand thread that it is running in. Since teststand let's you specify VI execution in the runtime engine instead of LabVIEW that might do the job.
The one catch is once the sequence completes, the logger does some cleanup, post processing, etc that depending on the amount of data captured can take some time so if a set of sequences needs to be executed, this could hang up teststand until that post processing is completed. That is one reason why I wanted it to execute outside of testtand so that additonal sequences could continue to run while the daemon finishes up in the background.
But, it's something I'll have to look into.
Post CLD and when I'm a CLA when someone asks who I am, I can spin around in my chair and say "I am... the architect."

Installing NI-DAQmx Base using a LabVIEW built installer

I am using a PDA, LabVIEW Mobile Module and the CF-6004 to perform instrument control and data acquistion for a handheld instrument I am developing. Because this instrument is going to be used by another party outside my organization, I am also supplying support software for a companion PC. The support software includes ActiveSync to connect the PC and the PDA, a LabVIEW built application for viewing the data collected by the handheld instrument, a LabVIEW built application for installing/updating the LabVIEW (Mobile Module) built PDA applications and NI-DAQmx Base to install the drivers on the PDA. Ni-DAQmx Base needs to be included because if the PDA battery runs down completely, programs/drivers I installed are lost and the other party needs to have the ability to reinstall the necessary files on the PDA.
The problem is that I cannot find a way to include NI-DAQmx Base in the installer I build to install my LabVIEW built applications onto the PC. It is not listed under the Additional Installers catagory of the installer properties. I cannot run the NI-DAQmx Base Setup.exe with the "Run executable at end of installation" option because I cannot have two LabVIEW installers running simultaneously.
Right now my work around is to use a batch file to install each component sequentially.
Is there anyway to include my my LabVIEW built executables, the Run-Time Engine and NI-DAQmx Base in the same installer package?
Thanks,
DAJone

Hello, It is necessary to install Daqmx Base on the machine connected to the PDA and then use the Utility to install it on the PDA. See page 4 of the Mobile Module Manual:
http://www.ni.com/pdf/manuals/371296e.pdf
National Instruments

Really long startup times

Does anyone else experience very long startup times with imq? If so, do you know the cause and how to reduce it?
We're seeing startup times of up to an hour with the 3.6 Enterprise version. Stopping the broker doesn't take very long, but restarting is a different story. The log doesn't seem to show anything unusual, but there are long periods where it just sits there doing nothing. Here's an example:
================================================================================
Java Runtime: 1.5.0_01 Sun Microsystems Inc. /usr/jdk/instances/jdk1.5.0/jre
[10/Dec/2005:16:23:57 EST] License: Sun Java(tm) System Message Queue 3.6 Enterprise Edition
[10/Dec/2005:16:23:57 EST] IMQ_HOME=/
[10/Dec/2005:16:23:57 EST] IMQ_VARHOME=/var/imq
[10/Dec/2005:16:23:57 EST] SunOS 5.10 sparc jmsdev03 (1 cpu) emb
[10/Dec/2005:16:23:57 EST] Max file descriptors: 65536 (65536)
[10/Dec/2005:16:23:57 EST] Java Heap Size: max=194688k, current=32448k
[10/Dec/2005:16:23:57 EST] Arguments: -name JMSDEV -port 8001 -license unl
[10/Dec/2005:16:23:57 EST] [B1004]: Starting the portmapper service using tcp [ 8001, 50, * ] with min threads 1 and max threads of 1
[10/Dec/2005:16:23:57 EST] [B1060]: Loading persistent data...
[10/Dec/2005:16:23:57 EST] Using plugged in persistent store:
database connection url=jdbc:oracle:thin:@dbdev:1521:jmsdevdb
brokerid=JMSDEV
[10/Dec/2005:16:24:10 EST] [B1041]: Cluster initialization successful.
[10/Dec/2005:16:24:10 EST] [B1136]: Processing stored transactions
[10/Dec/2005:16:24:10 EST] [B1013]: Auto Creation of Queues is Enabled
[10/Dec/2005:17:05:19 EST] [B1151]: Loading destination mq.sys.dmq [Queue] with 0 messages
[10/Dec/2005:17:05:52 EST] [B1152]: Loading of destination mq.sys.dmq [Queue] complete
[10/Dec/2005:17:05:52 EST] [B3138]: Unable to parse property imq.protocol.tcp.inbufsz:
java.lang.NumberFormatException: For input string: "128k"
[10/Dec/2005:17:05:52 EST] [B3138]: Unable to parse property imq.protocol.tcp.outbufsz:
java.lang.NumberFormatException: For input string: "128k"
[10/Dec/2005:17:05:53 EST] [B3138]: Unable to parse property imq.protocol.tcp.inbufsz:
java.lang.NumberFormatException: For input string: "128k"
[10/Dec/2005:17:05:53 EST] [B3138]: Unable to parse property imq.protocol.tcp.outbufsz:
java.lang.NumberFormatException: For input string: "128k"
[10/Dec/2005:17:05:53 EST] [B1004]: Starting the admin service using tcp(host = *, port=0, mode=dedicated) with min threads 4 and max thread
s of 10
[10/Dec/2005:17:05:53 EST] [B1004]: Starting the jms service using tcp(host = *, port=0, mode=dedicated) with min threads 10 and max threads
of 1000
[10/Dec/2005:17:05:53 EST] [B1004]: Starting the cluster service using tcp [ 0 ] with min threads 1 and max threads of 1
[10/Dec/2005:17:05:53 EST] [B1039]: Broker "JMSDEV@jmsdev03:8001" ready.
========================
As you can see, startup takes roughly 35 mins and between the messages "Auto Creation of Queues is Enabled" and "Loading destination mq.sys.dmq" there's no indication of what's happening.
Any clues?

You may be running into Message Queue bug
6155089 JDBC: JDBCStore.getMessageCount() takes a long time with large messages and Oracle
I imagine this could also happen if you have a lot of messages or destinations.
A fix is being worked on . In the meantime you can work around this by adding
an index to MQ's message table. Details will be posted shortly...
Joe

Runtime error(Time limit exceeds)after executing select query

Dear experts, whenever i executing the select query in this zprogram i am getting runtime error that time limit exceeds.i am using inner join and into table.after that also i am geetting error. how can i resolve it??
SELECT LIKP~VBELN LIKP~WADAT_IST LIKP~VEHICLE_NO LIKP~TRNAME
          LIKP~VEHI_TYPE LIKP~LR_NO LIKP~ANZPK LIKP~W_BILL_NO
          LIKP~SEALNO1                                       " Seal NO1
          LIKP~SEALNO2                                       " Seal NO2
          LIPS~LFIMG
          VBRP~VBELN VBRP~VGBEL VBRP~MATNR VBRP~AUBEL VBRP~FKIMG
          VBAK~AUART
          VBRK~FKART VBRK~KNUMV VBRK~FKSTO
          FROM LIKP INNER JOIN LIPS ON LIKP~VBELN EQ LIPS~VBELN
                    INNER JOIN VBRP ON LIKP~VBELN EQ VBRP~VGBEL
                    INNER JOIN VBAK ON VBRP~AUBEL EQ VBAK~VBELN
                    INNER JOIN VBRK ON VBRP~VBELN EQ VBRK~VBELN
          INTO TABLE I_FINAL_TEMP
          WHERE LIKP~VSTEL = '5100' AND
             LIKP~WADAT_IST IN S_WADAT AND
                VBRP~AUBEL IN S_AUBEL AND
                VBAK~AUART IN ('ZJOB','ZOR') AND
                VBRK~FKART IN S_FKART AND
*               VBRK~FKART IN ('ZF8','ZF2','ZS1') AND
                VBRK~FKSTO NE 'X'.
When I am debugging the select query.the cursor will not go to next step.after 15-20 minutes i am getting runtime error(time limit exceeds).
how can i resolve it for that scenario??

Looks like whole SD flow you trying to fetch in single query
First you check the database statistic of these table are upto date in system ( Check with basis team )
if this query was working fine earlier.
Most of table involved are huge volume tables which queried with any primary key
Any secondary index on created for LIKP on VSTEL WADET ?
My suggestion would be split the selection queries and make use of primary or existing secondary index to fetch the desired result if possible. For testing purpose split the queries and find which is taking more time and which needs index by taking squel trace in ST05.
Also take ST05 trace of this query in debugger ( New debugger -> special tool -> trace > ST05/SE30)

SQL Query Executing longer time

Hi , The below SQL query executing longer time . Please help to Improve the query performance. The query continuously running for more than 24 hours and failing with roolback segment error. Not getting the final output. Most of the tables are having milions of records.
Select distinct
IBS.ADSL_ACCESS_INFO,
IBS.LIJ ,
regexp_substr(OBVS.REFERENTIE_A,'[[:digit:]]+') as O_NUMBER,
DBS.CKR_NUMMER_CONTRACTANT,
DBS.DNUMBER
FROM CD.IBS,
CD.OIBL,
CD.IH,
CD.ODL,
CD.OH,
CD.DBS,
CD.OBVS
Where IBS.END_DT = To_Date('31129999', 'ddmmyyyy')
AND OIBL.END_DT = to_date('31129999', 'ddmmyyyy')
AND DBS.END_DT = to_date('31129999', 'ddmmyyyy')
AND OBVS.END_DT = to_date('31129999', 'ddmmyyyy')
AND OBVS.REFERENTIE_A LIKE 'OFM%'
AND OIBL.INFRA_KEY = IH.INFRA_KEY
AND OIBL.ORDERS_KEY = OH.ORDERS_KEY
AND IBS.INFH_ID = IH.INFH_ID
AND ODL.ORDH_ID = OH.ORDH_ID
AND DBS.DEBH_ID = ODL.DEBH_ID
AND OBVS.ORDH_ID = ODL.ORDH_ID
Order By IBS.LIJ
All the columns which are present in the where condition are having either Index/key (Primary/unique) except END_DT column.
Please Advise

Predicate pushing can help when it greatlly restricts the number of rows - you must experiment - might not work with all predicates pushed (as shown here)
select distinct
       ibs.adsl_access_info,
       ibs.lij,
       obvs.o_number,
       dbs.ckr_nummer_contractant,
       dbs.dnumber
from (select infh_id,adsl_access_info,lij
          from cd.ibs
         where end_dt = to_date('31129999','ddmmyyyy')
       ) ibs,
       (select infra_key,orders_key
          from cd.oibl
         where end_dt = to_date('31129999','ddmmyyyy')
       ) oibl,
       (select ordh_id,regexp_substr(obvs.referentie_a,'[[:digit:]]+') as o_number
          from cd.obvs
         where end_dt = to_date('31129999','ddmmyyyy')
           and referentie_a like 'OFM%'
       ) obvs,
       (select debh_id,ckr_nummer_contractant,dnumber
          from cd.dbs
         where end_dt = to_date('31129999','ddmmyyyy')
       ) dbs,
       cd.ih,
       cd.odl,
       cd.oh
where oibl.infra_key = ih.infra_key
   and oibl.orders_key = oh.orders_key
   and ibs.infh_id = ih.infh_id
   and odl.ordh_id = oh.ordh_id
   and dbs.debh_id = odl.debh_id
   and obvs.ordh_id = odl.ordh_id
order by ibs.lijRegards
Etbin

Macbook Pro: long startup time / very slow in general

Hello everyone,
I purchased a Macbook Pro 15” in the summer of 2010 before going to university.
The startup time has become ridiculously slow. Even opening a web browser is stressful.
I have now completed my studies and I am pretty sure I have uninstalled all the large software I had installed for my degree and deleted majority of my
document/files however the startup time has not improved.
I have been looking through threads discussing Factory resets?
My Mac did not come with a disk (Snow Leopard originally installed). I simply turned the thing on and it was ready to go.
If I was to reset my Mac to factory settings would I need to purchase a disk? Is there something else that I could do instead?
The problem seemed to materialise when I upgraded to “OS X Mavericks”.
The only software I want to keep on my Mac is Pages, Numbers and Keynote.
I have transferred all the documents I wish to keep to another computer so I do not mind losing everything currently on my Mac.
Any help would be appreciated.
Thanks

Do you know what the original disks were? Were they snow Leopard, higher than 10.6.3, they are most likely builld specific.
I can not guarantee that it will speed it up, but if your HD was pretty full 50%+ as well as your caches, it should clear a lot of stuff off the machine that can slow it down. It will probably take a couple hours to go thru this, give or take.
How much of your HD is used, I keep mine at about 20% to help keep it faster, (less stuff to search)
If it is just the speed you are concerned with I will send you some links in regards to that. I answered that you wanted to go back to "New machine" settings, hence my reply.
Slow Mac:
https://discussions.apple.com/docs/DOC-3521
http://www.macworld.com/article/2026650/mac-troubleshooting-what-to-do-when-your -computer-is-too-slow.html
https://discussions.apple.com/docs/DOC-3353
http://www.reedcorner.net/mpg/
Maybe something here will offer help. The reason for repairing the disk and permissions, etc... is that smetimes the disk gets errors, which the mackine hen has to work around, if it can. Hvaeing your disk much past 50% will slow it down, having caches that have not been emptied and are full of junk can slow it down. Try going to Safari menu clicking reset Safari, empty cache, also go to Safari Preferences/Privacy tab click "remove all website data.
This would be a start. read thru the links, or do a tottal wipe and install.
I hope this has helped you in some way.

Matlab script of labview keeps executing multiple times,

i have some code for serial communication in matlab , i want to use it in labview for easier and better gui design. for that i have used matlab script node in labview. it seems that labview keep executing the matlab script but i want labview to execute it only once.is there any way to do it?
Solved!
Go to Solution.

i am attaching a vi file. this vi sends 'h' to the com1 continuously but i waant it to send only once.
Attachments:
forum.vi ‏7 KB

Slow startup time

Hi,
my macBook pro is taking a lot of time ( used to be 10-15 sec now 50 sec ) to boot (while in kernel boot mode). These are my logs after the "BOOT_TIME" message:
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
10/13/14 12:30:01.000 AM kernel[0]: Longterm timer threshold: 1000 ms
10/13/14 12:30:01.000 AM kernel[0]: PMAP: PCID enabled
10/13/14 12:30:01.000 AM kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
10/13/14 12:30:01.000 AM kernel[0]: Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
10/13/14 12:30:01.000 AM kernel[0]: vm_page_bootstrap: 1963324 free pages and 117444 wired pages
10/13/14 12:30:01.000 AM kernel[0]: kext submap [0xffffff7f807a9000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a9000]
10/13/14 12:30:01.000 AM kernel[0]: zone leak detection enabled
10/13/14 12:30:01.000 AM kernel[0]: "vm_compressor_mode" is 4
10/13/14 12:30:01.000 AM kernel[0]: standard timeslicing quantum is 10000 us
10/13/14 12:30:01.000 AM kernel[0]: standard background quantum is 2500 us
10/13/14 12:30:01.000 AM kernel[0]: mig_table_max_displ = 74
10/13/14 12:30:01.000 AM kernel[0]: TSC Deadline Timer supported and enabled
10/13/14 12:30:01.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
10/13/14 12:30:01.000 AM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
10/13/14 12:30:01.000 AM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
10/13/14 12:30:01.000 AM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
10/13/14 12:30:01.000 AM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
10/13/14 12:30:01.000 AM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
10/13/14 12:30:01.000 AM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
10/13/14 12:30:01.000 AM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
10/13/14 12:30:01.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
10/13/14 12:30:01.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
10/13/14 12:30:01.000 AM kernel[0]: calling mpo_policy_init for Sandbox
10/13/14 12:30:01.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
10/13/14 12:30:01.000 AM kernel[0]: calling mpo_policy_init for Quarantine
10/13/14 12:30:01.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
10/13/14 12:30:01.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
10/13/14 12:30:01.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
10/13/14 12:30:01.000 AM kernel[0]: MAC Framework successfully initialized
10/13/14 12:30:01.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
10/13/14 12:30:01.000 AM kernel[0]: AppleKeyStore starting (BUILT: Aug 17 2014 20:21:39)
10/13/14 12:30:01.000 AM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
10/13/14 12:30:01.000 AM kernel[0]: ACPI: sleep states S3 S4 S5
10/13/14 12:30:01.000 AM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0057
10/13/14 12:30:01.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 20:17:40 Aug 17 2014) initialization complete
10/13/14 12:30:01.000 AM kernel[0]: pci (build 20:04:33 Aug 17 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
10/13/14 12:30:01.000 AM kernel[0]: [ PCI configuration begin ]
10/13/14 12:30:01.000 AM kernel[0]: console relocated to 0xf80000000
10/13/14 12:30:01.000 AM kernel[0]: [ PCI configuration end, bridges 11, devices 15 ]
10/13/14 12:30:01.000 AM kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
10/13/14 12:30:01.000 AM kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
10/13/14 12:30:01.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
10/13/14 12:30:01.000 AM kernel[0]: rooting via boot-uuid from /chosen: 100BC880-E9C9-3232-A4B0-C221E0D1ECA6
10/13/14 12:30:01.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
10/13/14 12:30:01.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
10/13/14 12:30:01.000 AM kernel[0]: com.apple.AppleFSCompressionTypeLZVN kmod start
10/13/14 12:30:01.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
10/13/14 12:30:01.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
10/13/14 12:30:01.000 AM kernel[0]: com.apple.AppleFSCompressionTypeLZVN load succeeded
10/13/14 12:30:01.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
10/13/14 12:30:01.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
10/13/14 12:30:01.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartitionScheme/Customer@2
10/13/14 12:30:01.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
10/13/14 12:30:01.000 AM kernel[0]: BTCOEXIST off
10/13/14 12:30:01.000 AM kernel[0]: BRCM tunables:
10/13/14 12:30:01.000 AM kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
10/13/14 12:30:01.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 003ee1fffe354d36; max speed s800.
10/13/14 12:30:01.000 AM kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
10/13/14 12:30:01.000 AM kernel[0]: hfs: mounted Macintosh HD on device root_device
10/13/14 12:30:01.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
10/13/14 12:29:44.577 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
10/13/14 12:29:44.577 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
10/13/14 12:29:55.817 AM com.apple.SecurityServer[15]: Session 100000 created
10/13/14 12:30:02.775 AM distnoted[21]: assertion failed: 13F34: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
10/13/14 12:30:02.793 AM hidd[52]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
10/13/14 12:30:02.793 AM hidd[52]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
10/13/14 12:30:03.000 AM kernel[0]: Waiting for DSMOS...
10/13/14 12:30:03.000 AM kernel[0]: VM Swap Subsystem is ON
10/13/14 12:30:04.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
10/13/14 12:30:04.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
10/13/14 12:30:04.816 AM kdc[50]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
10/13/14 12:30:04.817 AM com.apple.launchd[1]: (com.apple.Kerberos.kdc[50]) Exited with code: 1
10/13/14 12:30:04.817 AM com.apple.launchd[1]: (com.apple.Kerberos.kdc) Throttling respawn: Will start in 6 seconds
10/13/14 12:30:04.892 AM com.apple.usbmuxd[26]: usbmuxd-344 on Jul 29 2014 at 13:52:57, running 64 bit
10/13/14 12:30:04.000 AM kernel[0]: IOBluetoothUSBDFU::probe
10/13/14 12:30:04.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821D FirmwareVersion - 0x0131
10/13/14 12:30:04.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x6000 ****
10/13/14 12:30:04.000 AM kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0x6000 ****
10/13/14 12:30:04.000 AM kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
10/13/14 12:30:04.000 AM kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
10/13/14 12:30:04.000 AM kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
10/13/14 12:30:04.000 AM kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
10/13/14 12:30:04.000 AM kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
10/13/14 12:30:04.000 AM kernel[0]: Previous Shutdown Cause: 5
10/13/14 12:30:04.000 AM kernel[0]: init
10/13/14 12:30:04.000 AM kernel[0]: probe
10/13/14 12:30:04.000 AM kernel[0]: start
10/13/14 12:30:04.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x6000
10/13/14 12:30:04.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
10/13/14 12:30:05.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
10/13/14 12:30:05.000 AM kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x5d80 -- 0x6000 -- 0x6000 ****
10/13/14 12:30:05.000 AM kernel[0]: DSMOS has arrived
10/13/14 12:30:05.111 AM mds[42]: (Normal) FMW: FMW 0 0
10/13/14 12:30:05.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x6000 ****
10/13/14 12:30:05.000 AM kernel[0]: m_tail has not been written to hardware: m_tail = 0x00000000, hardare tail register = 0x00000060
10/13/14 12:30:05.190 AM mds[42]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/13/14 12:30:05.203 AM mds[42]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/13/14 12:30:05.206 AM com.apple.SecurityServer[15]: Entering service
10/13/14 12:30:05.311 AM UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
10/13/14 12:30:05.337 AM digest-service[75]: label: default
10/13/14 12:30:05.337 AM digest-service[75]: dbname: od:/Local/Default
10/13/14 12:30:05.337 AM digest-service[75]: mkey_file: /var/db/krb5kdc/m-key
10/13/14 12:30:05.337 AM digest-service[75]: acl_file: /var/db/krb5kdc/kadmind.acl
10/13/14 12:30:05.339 AM digest-service[75]: digest-request: uid=0
10/13/14 12:30:05.343 AM loginwindow[46]: Login Window Application Started
10/13/14 12:30:05.347 AM mDNSResponder[43]: mDNSResponder mDNSResponder-522.92.1 (Jul 27 2014 17:31:49) starting OSXVers 13
10/13/14 12:30:05.352 AM awacsd[65]: Starting awacsd connectivity_executables-97.1 (Jul 27 2014 17:02:42)
10/13/14 12:30:05.364 AM UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
10/13/14 12:30:05.365 AM awacsd[65]: InnerStore CopyAllZones: no info in Dynamic Store
10/13/14 12:30:05.402 AM digest-service[75]: digest-request: netr probe 0
10/13/14 12:30:05.416 AM digest-service[75]: digest-request: init request
10/13/14 12:30:05.424 AM digest-service[75]: digest-request: init return domain: BUILTIN server: LOCALHOST indomain was: <NULL>
10/13/14 12:30:05.470 AM WindowServer[88]: Server is starting up
10/13/14 12:30:05.486 AM mDNSResponder[43]: D2D_IPC: Loaded
10/13/14 12:30:05.486 AM mDNSResponder[43]: D2DInitialize succeeded
10/13/14 12:30:05.489 AM mDNSResponder[43]:   4: Listening for incoming Unix Domain Socket client requests
10/13/14 12:30:05.000 AM kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
10/13/14 12:30:05.522 AM networkd[109]: networkd.109 built Aug 24 2013 22:08:46
10/13/14 12:30:05.558 AM mds[42]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/13/14 12:30:05.625 AM mDNSResponder[43]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FD44380AD60 juros-MacBook-Pro.local. (Addr) that's already in the list
10/13/14 12:30:05.625 AM mDNSResponder[43]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FD44380B1F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
10/13/14 12:30:05.625 AM mDNSResponder[43]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FD444801360 juros-MacBook-Pro.local. (AAAA) that's already in the list
10/13/14 12:30:05.625 AM mDNSResponder[43]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FD4448017F0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
10/13/14 12:30:05.634 AM com.apple.launchd[1]: (com.apple.Kerberos.kdc) Throttling respawn: Will start in 6 seconds
10/13/14 12:30:05.648 AM systemkeychain[91]: done file: /var/run/systemkeychaincheck.done
10/13/14 12:30:05.000 AM kernel[0]: nspace-handler-set-snapshot-time: 1413153007
10/13/14 12:30:05.657 AM com.apple.mtmd[41]: Set snapshot time: 2014-10-13 00:30:07 +0200 (current time: 2014-10-13 00:30:05 +0200)
10/13/14 12:30:05.741 AM locationd[48]: NBB-Could not get UDID for stable refill timing, falling back on random
10/13/14 12:30:05.795 AM airportd[69]: airportdProcessDLILEvent: en1 attached (down)
10/13/14 12:30:05.000 AM kernel[0]: createVirtIf(): ifRole = 1
10/13/14 12:30:05.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
10/13/14 12:30:05.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
10/13/14 12:30:05.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
10/13/14 12:30:05.000 AM kernel[0]: Created virtif 0xffffff801d4f8c00 p2p0
10/13/14 12:30:05.918 AM locationd[48]: Location icon should now be in state 'Inactive'
10/13/14 12:30:06.000 AM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
10/13/14 12:30:06.751 AM mdmclient[44]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
10/13/14 12:30:07.834 AM mdmclient[44]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
10/13/14 12:30:08.341 AM configd[18]: dhcp_arp_router: en1 SSID unavailable
10/13/14 12:30:08.341 AM com.apple.launchd[1]: (com.apple.Kerberos.kdc) Throttling respawn: Will start in 3 seconds
10/13/14 12:30:08.354 AM configd[18]: network changed: DNS*
10/13/14 12:30:08.355 AM configd[18]: setting hostname to "juros-MacBook-Pro.local"
10/13/14 12:30:08.742 AM mds_stores[86]: (Error) Permissions: Failed stat on perm journal with error 9
10/13/14 12:30:08.922 AM mdmclient[44]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
10/13/14 12:30:09.377 AM com.apple.launchd[1]: (com.apple.Kerberos.kdc) Throttling respawn: Will start in 2 seconds
10/13/14 12:30:10.012 AM mdmclient[44]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
10/13/14 12:30:10.565 AM apsd[67]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
10/13/14 12:30:11.386 AM kdc[119]: label: default
10/13/14 12:30:11.386 AM kdc[119]: dbname: od:/Local/Default
10/13/14 12:30:11.386 AM kdc[119]: mkey_file: /var/db/krb5kdc/m-key
10/13/14 12:30:11.386 AM kdc[119]: acl_file: /var/db/krb5kdc/kadmind.acl
10/13/14 12:30:11.395 AM kdc[119]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
10/13/14 12:30:11.432 AM kdc[119]: KDC started
10/13/14 12:30:11.579 AM mtmfs[40]: mount succeeded for /Volumes/MobileBackups
10/13/14 12:30:11.583 AM mds[42]: (Normal) Volume: volume:0x7fb5e301f000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/MobileBackups
10/13/14 12:30:11.583 AM mds[42]: (Normal) Volume: volume:0x7fb5e301f000 ********** Created snapshot backup index
10/13/14 12:30:11.000 AM kernel[0]: pci pause: SDXC
10/13/14 12:30:14.798 AM stackshot[29]: Timed out waiting for IOKit to finish matching.
10/13/14 12:30:18.000 AM kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode
10/13/14 12:30:18.000 AM kernel[0]: fGPUIdleIntervalMS = 0
10/13/14 12:30:19.000 AM kernel[0]: en4: promiscuous mode enable succeeded
10/13/14 12:30:19.206 AM WindowServer[88]: Session 256 retained (2 references)
10/13/14 12:30:19.206 AM WindowServer[88]: Session 256 released (1 references)
10/13/14 12:30:19.223 AM WindowServer[88]: Session 256 retained (2 references)
10/13/14 12:30:19.225 AM WindowServer[88]: init_page_flip: page flip mode is on
10/13/14 12:30:19.477 AM WindowServer[88]: Found 15 modes for display 0x00000000 [15, 0]
10/13/14 12:30:19.524 AM WindowServer[88]: Found 1 modes for display 0x00000000 [1, 0]
10/13/14 12:30:19.575 AM WindowServer[88]: Found 1 modes for display 0x00000000 [1, 0]
10/13/14 12:30:19.625 AM WindowServer[88]: Found 1 modes for display 0x00000000 [1, 0]
10/13/14 12:30:19.626 AM WindowServer[88]: mux_initialize: Couldn't find any matches
10/13/14 12:30:19.628 AM WindowServer[88]: Found 15 modes for display 0x00000000 [15, 0]
10/13/14 12:30:19.631 AM WindowServer[88]: Found 1 modes for display 0x00000000 [1, 0]
10/13/14 12:30:19.631 AM WindowServer[88]: Found 1 modes for display 0x00000000 [1, 0]
10/13/14 12:30:19.631 AM WindowServer[88]: Found 1 modes for display 0x00000000 [1, 0]
10/13/14 12:30:19.653 AM WindowServer[88]: WSMachineUsesNewStyleMirroring: true
10/13/14 12:30:19.654 AM WindowServer[88]: Display 0x042731c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 15 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc7, S/N 0, Unit 0, Rotation 0
UUID 0xcb5a19e16c20c98ebb2d70fc3bb550b4
10/13/14 12:30:19.654 AM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[4096 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
10/13/14 12:30:19.654 AM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
10/13/14 12:30:19.654 AM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
10/13/14 12:30:19.654 AM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
10/13/14 12:30:19.655 AM WindowServer[88]: WSSetWindowTransform: Singular matrix
10/13/14 12:30:19.655 AM WindowServer[88]: WSSetWindowTransform: Singular matrix
10/13/14 12:30:19.655 AM WindowServer[88]: WSSetWindowTransform: Singular matrix
10/13/14 12:30:19.670 AM WindowServer[88]: Display 0x042731c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 15 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc7, S/N 0, Unit 0, Rotation 0
UUID 0xcb5a19e16c20c98ebb2d70fc3bb550b4
10/13/14 12:30:19.670 AM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (2304, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
10/13/14 12:30:19.670 AM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (2305, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
10/13/14 12:30:19.670 AM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (2306, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
10/13/14 12:30:19.670 AM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (2307, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
10/13/14 12:30:19.670 AM WindowServer[88]: CGXPerformInitialDisplayConfiguration
10/13/14 12:30:19.671 AM WindowServer[88]:   Display 0x042731c0: Unit 0; Vendor 0x610 Model 0x9cc7 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
10/13/14 12:30:19.671 AM WindowServer[88]:   Display 0x003f0040: Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
10/13/14 12:30:19.671 AM WindowServer[88]:   Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2305,0)[1 x 1], Rotation 0, Resolution 1
10/13/14 12:30:19.671 AM WindowServer[88]:   Display 0x003f003e: Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2306,0)[1 x 1], Rotation 0, Resolution 1
10/13/14 12:30:19.671 AM WindowServer[88]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2307,0)[1 x 1], Rotation 0, Resolution 1
10/13/14 12:30:19.686 AM WindowServer[88]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000001f, accelerator 0x000034af, unit 0, caps QEX|MIPMAP, vram 1024 MB
10/13/14 12:30:19.686 AM WindowServer[88]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000001f, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
10/13/14 12:30:19.686 AM WindowServer[88]: GLCompositor enabled for tile size [256 x 256]
10/13/14 12:30:19.686 AM WindowServer[88]: CGXGLInitMipMap: mip map mode is on
10/13/14 12:30:19.692 AM loginwindow[46]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
10/13/14 12:30:20.373 AM awacsd[65]: Exiting
10/13/14 12:30:21.000 AM kernel[0]: MacAuthEvent en1   Auth result for: f8:d1:11:39:16:a0 MAC AUTH succeeded
10/13/14 12:30:21.000 AM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
10/13/14 12:30:21.000 AM kernel[0]: AirPort: Link Up on en1
10/13/14 12:30:21.000 AM kernel[0]: en1: BSSID changed to f8:d1:11:39:16:a0
10/13/14 12:30:21.442 AM WindowServer[88]: Display 0x042731c0: Unit 0; ColorProfile { 1, "Default(sRGB IEC61966-2.1)"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/13/14 12:30:21.467 AM launchctl[127]: com.apple.findmymacmessenger: Already loaded
10/13/14 12:30:21.503 AM com.apple.SecurityServer[15]: Session 100005 created
10/13/14 12:30:21.000 AM kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
10/13/14 12:30:21.569 AM loginwindow[46]: Setting the initial value of the magsave brightness level 2
10/13/14 12:30:21.569 AM UserEventAgent[128]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
10/13/14 12:30:21.594 AM loginwindow[46]: Login Window Started Security Agent
10/13/14 12:30:21.656 AM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
10/13/14 12:30:22.642 AM WindowServer[88]: Display 0x042731c0: Unit 0; ColorProfile { 1, "Default(sRGB IEC61966-2.1)"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/13/14 12:30:22.681 AM WindowServer[88]: Display 0x042731c0: Unit 0; ColorProfile { 1, "Default(sRGB IEC61966-2.1)"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/13/14 12:30:22.729 AM WindowServer[88]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042731c0 device: 0x7fc520c14550 isBackBuffered: 1 numComp: 3 numDisp: 3
10/13/14 12:30:22.729 AM WindowServer[88]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fc520c14550) - enabling OpenGL
10/13/14 12:30:23.284 AM SecurityAgent[136]: This is the first run
10/13/14 12:30:23.284 AM SecurityAgent[136]: MacBuddy was run = 0
10/13/14 12:30:23.819 AM parentalcontrolsd[148]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
10/13/14 12:30:23.850 AM configd[18]: network changed: DNS* Proxy
10/13/14 12:30:23.853 AM UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'SPARROW_TP_LINK' not making interface primary (no cache entry)
10/13/14 12:30:23.855 AM UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
10/13/14 12:30:23.857 AM UserEventAgent[11]: Captive: en1: Probing 'SPARROW_TP_LINK'
10/13/14 12:30:23.950 AM UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
10/13/14 12:30:23.954 AM configd[18]: network changed: v4(en1!:192.168.1.21) DNS+ Proxy+ SMB
10/13/14 12:30:24.995 AM ntpd[112]: proto: precision = 1.000 usec
10/13/14 12:30:26.713 AM apsd[67]: Unrecognized leaf certificate
can you help me please?

It seems, that all Windows machines develop this type of long startup-times over time. Conclusion: Bad quality operating system . There are a few things you may try: Disk cleanup, disk defragmentation and avoiding non-neccesary start-up programs running msconfig. My experience is, that all of these have limited impact, so the ultimate solution is a clean re-install of Windows. To do this, back-up all user data and use recovery disks as available.
Hans-Henrik
T440 20B7-S0HN00 replacing T60 2007-VPX CoreDuo T2400 1,83GHz, ATI x1300 SXGA+, Win8.1 Pro, 4Gb RAM (=3), Kingston SSDNow V200 128GB, MS Office 2007, OpenOffice. 3 more T60 in family!

Hide the Deployment window in a built executable

My LabVIEW application uses Shared Variables to pass data around, and therefore my built executable needs to deploy the shared variables at launch. This is all handled automatically it seems by the builder/executable, but it results in a Deployment Window appearing when I launch the executable. It takes a good few seconds to deploy all my variables, and until it's done my application panel doesn't appear.
Personally I think this looks ugly and quite unusual for an application, I'm sure there will be questions asked by the customer, so I was hoping there might be some way to suppress or hide the deployment window?
This is a snapshot of the window about half way through deployment:
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Hi Thoric,
Unfortunately, it is not currently possible to hide the Deployment Progress dialog box when deploying Shared Variables in and executable. This is confirmed in the Knowledge Base article below.
Can You Hide the Deploy... Dialog Box that Displays when Downloading to Real-Time Targets Or Buildin...
I certainly agree with you however that this is a great recommendation for a future feature in LabVIEW and as such I recommend that you post it as a suggestion on the Product Suggestion Center which I have also linked below for your convenience.
Product Suggestion Center
Best Regards,
Christian Hartshorne
NIUK

Okay I give up - wicked slow startup time

I've been reading every post I could find related to slow startup times, and trying every conceivable solution others have thought of and that I could think of, and I'm still plagued by a slow startup time!
Last week it was not a problem. I had just created a 10GB partition and installed Windows XP on it. Things were running smoothly. My startup times weren't like 20 seconds, but they weren't as bad as they are now (a consistent 3.5-4 minutes). Maybe it would take a minute to a minute and a half to start. Then suddenly over the weekend, it started taking 5+ minutes to boot! What could have happened?
I panicked and erased the Windows partition, backed up to Time Machine (suspecting possible disk failure in my future), and started doing every maintenance thing I know to do (fsck-which returned no errors, permissions repair, reset nv-ram and p-ram, OnyX maintenance scripts). This got it back down to where it is now, a consistent 3.5 minutes. That's still much slower than it should be.
Below is everything the Console says immediately after booting. Thanks so much for anything anyone can do to help!
6/24/08 8:09:50 AM kernel npvhash=4095
6/24/08 8:09:50 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
6/24/08 8:09:50 AM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
6/24/08 8:09:50 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
6/24/08 8:09:50 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
6/24/08 8:09:50 AM DirectoryService[11] Launched version 5.3 (v514.19)
6/24/08 8:09:50 AM kernel hi mem tramps at 0xffe00000
6/24/08 8:09:50 AM kernel PAE enabled
6/24/08 8:09:50 AM kernel 64 bit mode enabled
6/24/08 8:09:50 AM kernel Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
6/24/08 8:09:50 AM kernel standard timeslicing quantum is 10000 us
6/24/08 8:09:50 AM kernel vmpagebootstrap: 972093 free pages and 76483 wired pages
6/24/08 8:09:50 AM kernel migtable_maxdispl = 79
6/24/08 8:09:50 AM kernel 98 prelinked modules
6/24/08 8:09:50 AM kernel AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
6/24/08 8:09:50 AM kernel AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
6/24/08 8:09:50 AM kernel Loading security extension com.apple.security.TMSafetyNet
6/24/08 8:09:50 AM kernel calling mpopolicyinit for TMSafetyNet
6/24/08 8:09:50 AM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
6/24/08 8:09:50 AM kernel Loading security extension com.apple.nke.applicationfirewall
6/24/08 8:09:50 AM kernel Loading security extension com.apple.security.seatbelt
6/24/08 8:09:50 AM kernel calling mpopolicyinit for mb
6/24/08 8:09:50 AM kernel Seatbelt MACF policy initialized
6/24/08 8:09:50 AM kernel Security policy loaded: Seatbelt Policy (mb)
6/24/08 8:09:50 AM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
6/24/08 8:09:50 AM kernel The Regents of the University of California. All rights reserved.
6/24/08 8:09:50 AM kernel MAC Framework successfully initialized
6/24/08 8:09:50 AM kernel using 16384 buffer headers and 4096 cluster IO buffer headers
6/24/08 8:09:50 AM kernel devfsmakenode: not ready for devices!
6/24/08 8:09:50 AM kernel IOAPIC: Version 0x20 Vectors 64:87
6/24/08 8:09:50 AM kernel ACPI: System State [S0 S3 S4 S5] (S3)
6/24/08 8:09:50 AM kernel mbinit: done
6/24/08 8:09:50 AM kernel Security auditing service present
6/24/08 8:09:50 AM kernel BSM auditing present
6/24/08 8:09:50 AM kernel rooting via boot-uuid from /chosen: 0DBAAC14-6DD7-3E77-B71F-F1A915C2BCED
6/24/08 8:09:50 AM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
6/24/08 8:09:50 AM kernel FireWire (OHCI) TI ID 8025 built-in now active, GUID 001cb3fffe865bee; max speed s800.
6/24/08 8:09:50 AM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/FUJITSU MHW2160BHPL Media/IOGUIDPartitionScheme/Customer@2
6/24/08 8:09:50 AM kernel BSD root: disk0s2, major 14, minor 2
6/24/08 8:09:50 AM kernel CSRHIDTransitionDriver::start []
6/24/08 8:09:50 AM kernel CSRHIDTransitionDriver::switchToHCIMode legacy
6/24/08 8:09:50 AM kernel Jettisoning kernel linker.
6/24/08 8:09:50 AM kernel Resetting IOCatalogue.
6/24/08 8:09:50 AM kernel GFX0: family specific matching fails
6/24/08 8:09:50 AM kernel Matching service count = 1
6/24/08 8:09:50 AM kernel Matching service count = 2
6/24/08 8:09:50 AM kernel Matching service count = 2
6/24/08 8:09:50 AM kernel Matching service count = 2
6/24/08 8:09:50 AM kernel Matching service count = 2
6/24/08 8:09:50 AM kernel Matching service count = 2
6/24/08 8:09:50 AM mDNSResponder mDNSResponder-171.4 (Apr 20 2008 11:59:52)[16] starting
6/24/08 8:09:51 AM kextd[10] 407 cached, 0 uncached personalities to catalog
6/24/08 8:09:51 AM kernel Previous Shutdown Cause: 5
6/24/08 8:09:51 AM com.apple.SecurityServer[21] Entering service
6/24/08 8:09:51 AM kernel NVDANV50HAL loaded and registered.
6/24/08 8:09:51 AM kernel ath_attach: devid 0x24
6/24/08 8:09:51 AM kernel GFX0: family specific matching fails
6/24/08 8:09:51 AM kernel Override HT40 CTL Powers. EEPROM Version is 14.4, Device Type 5
6/24/08 8:09:53 AM kernel mac 12.10 phy 8.1 radio 12.0
6/24/08 8:09:55 AM kernel USBF: 11.738 AppleUSBHubPort: Port 1 of Hub at 0x1a000000 about to terminate a busy device (IOUSBCompositeDevice) after waiting 10 seconds
6/24/08 8:09:55 AM rpc.statd[29] statd.notify - no notifications needed
6/24/08 8:09:55 AM kernel USBF: 12. 39 CSRHIDTransitionDriver[0x6e4c080](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
6/24/08 8:09:55 AM fseventsd[37] bumping event counter to: 0x406dfc (current 0x0) from log file '00000000003faded'
6/24/08 8:09:56 AM kernel CSRHIDTransitionDriver... done
6/24/08 8:09:57 AM kernel IPv6 packet filtering initialized, default to accept, logging disabled
6/24/08 8:09:57 AM kernel yukon: Ethernet address 00:1b:63:96:ae:8a
6/24/08 8:09:57 AM kernel AirPort_Athr5424ab: Ethernet address 00:1c:b3:b2:f9:eb
6/24/08 8:09:57 AM bootlog[44] BOOT_TIME: 1214309384 0
6/24/08 8:09:58 AM /usr/sbin/ocspd[58] starting
6/24/08 8:09:58 AM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[32] Login Window Application Started
6/24/08 8:09:59 AM configd[14] AppleTalk startup
6/24/08 8:09:59 AM configd[14] setting hostname to "mitch-macbook.local"
6/24/08 8:10:01 AM kernel AppleYukon2 - en0 link active, 100-Mbit, full duplex, flow control disabled port 0
6/24/08 8:10:01 AM kernel AirPort: Link Up on en1
6/24/08 8:10:02 AM ntpdate[71] can't find host time.apple.com
6/24/08 8:10:02 AM org.ntp.ntpd[25] Error : nodename nor servname provided, or not known
6/24/08 8:10:02 AM ntpdate[71] no servers can be used, exiting
6/24/08 8:10:02 AM com.apple.SystemStarter[27] Initializing tap devices
6/24/08 8:10:02 AM com.apple.SystemStarter[27] Initializing tun devices
6/24/08 8:10:02 AM com.apple.SystemStarter[27] Starting FTDI ReEnumerate
6/24/08 8:10:02 AM com.apple.SystemStarter[27] Starting Cisco Systems VPN Driver
6/24/08 8:10:02 AM com.apple.SystemStarter[27] kextload serialization lock busy; sleeping (89 retries left)
6/24/08 8:10:02 AM com.apple.SystemStarter[27] kextload serialization lock busy; sleeping (89 retries left)
6/24/08 8:10:03 AM kernel CiscoVPN : attempting to attach to all available ethernet interfaces.
6/24/08 8:10:02 AM com.apple.SystemStarter[27] kextload: extension /System/Library/Extensions/CiscoVPN.kext is already loaded
6/24/08 8:10:03 AM kernel CiscoVPN : checking if we are already attached to interface: en1
6/24/08 8:10:03 AM kernel CiscoVPN : no, not yet attached to interface: en1
6/24/08 8:10:03 AM kernel CiscoVPN : interface: en1, filter attached.
6/24/08 8:10:03 AM kernel CiscoVPN : current MTU for en1 is 1500, saving it.
6/24/08 8:10:03 AM com.apple.SystemStarter[27] kextload serialization lock busy; sleeping (88 retries left)
6/24/08 8:10:03 AM com.apple.SystemStarter[27] kextload: /Library/Extensions/tun.kext loaded successfully
6/24/08 8:10:02 AM ntpd[25] bind() fd 25, family 30, port 123, scope 4, addr fe80::21b:63ff:fe96:ae8a, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
6/24/08 8:10:03 AM kernel CiscoVPN : checking if we are already attached to interface: en0
6/24/08 8:10:02 AM ntpd[25] bind() fd 25, family 30, port 123, scope 6, addr fe80::21c:b3ff:feb2:f9eb, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
6/24/08 8:10:04 AM kernel CiscoVPN : no, not yet attached to interface: en0
6/24/08 8:10:03 AM configd[14] AppleTalk startup complete
6/24/08 8:10:03 AM configd[14] AppleTalk shutdown
6/24/08 8:10:27 AM kernel CiscoVPN : interface: en0, filter attached.
6/24/08 8:10:04 AM configd[14] AppleTalk shutdown complete
6/24/08 8:10:27 AM kernel CiscoVPN : current MTU for en0 is 1500, saving it.
6/24/08 8:10:04 AM configd[14] AppleTalk startup
6/24/08 8:10:28 AM com.apple.SystemStarter[27] kextload: /Library/Extensions/tap.kext loaded successfully
6/24/08 8:10:28 AM kernel CiscoVPN : loading cisco ipsec kernel module.
6/24/08 8:10:28 AM kernel tun kernel extension version 20080121 <[email protected]>
6/24/08 8:10:28 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 8:10:05 AM kextd[10] writing kernel link data to /var/run/mach.sym
6/24/08 8:10:29 AM kernel tap kernel extension version 20080121 <[email protected]>
6/24/08 8:10:27 AM configd[14] AppleTalk startup failed, status = 92 (retrying)
6/24/08 8:10:29 AM configd[14] AppleTalk startup
6/24/08 8:10:58 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 8:10:58 AM configd[14] AppleTalk startup failed, status = 92 (retrying)
6/24/08 8:10:58 AM loginwindow[32] Login Window Started Security Agent
6/24/08 8:10:59 AM SecurityAgent[96] User info context values set
6/24/08 8:11:00 AM configd[14] AppleTalk startup
6/24/08 8:11:22 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 8:11:22 AM configd[14] AppleTalk startup failed, status = 92 (retrying)
6/24/08 8:11:24 AM configd[14] AppleTalk startup
6/24/08 8:11:45 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 8:11:46 AM SecurityAgent[96] Login Window done
6/24/08 8:11:46 AM loginwindow[32] Login Window - Returned from Security Agent
6/24/08 8:11:46 AM loginwindow[32] USER_PROCESS: 32 console
6/24/08 8:11:46 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[91]) Exited: Terminated
6/24/08 8:11:47 AM configd[14] AppleTalk startup failed, status = 92 (retrying)
6/24/08 8:11:49 AM configd[14] AppleTalk startup
6/24/08 8:12:11 AM configd[14] AppleTalk startup failed, status = 92
6/24/08 8:12:17 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 8:12:14 AM /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer[110] ATSResolveAliasWithMountFlags timeout. (ATSServer pid:110)
6/24/08 8:12:40 AM /System/Library/CoreServices/coreservicesd[48] SFLSharePointsEntry::InitializeSPNode: dsOpenRecord returned -14136
6/24/08 8:12:40 AM /System/Library/CoreServices/coreservicesd[48] SFLSharePointsEntry::InitializeSPNode: dsCreateRecordAndOpen returned -14135
6/24/08 8:12:40 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 8:12:54 AM Dock[108] [QL ERROR] Generator database update takes too long... we will use what we currently have
6/24/08 8:13:45 AM configd[14] AppleTalk startup
6/24/08 8:13:48 AM configd[14] AppleTalk startup complete
6/24/08 8:13:49 AM SCHelper[145] no command
6/24/08 8:13:49 AM SCHelper[141] no command
6/24/08 8:13:49 AM com.apple.launchd[66] ([0x0-0x12012].com.apple.systempreferences[137]) Stray process with PGID equal to this dead job: PID 145 PPID 1 SCHelper

For further clarification, here is what the console says under "All messages" immediately after my last reboot (which took 3 min 55 sec) going back to when I clicked "Restart".
6/24/08 11:53:22 AM shutdown[190] reboot by mitchmoss:
6/24/08 11:53:22 AM shutdown[190] SHUTDOWN_TIME: 1214322802 148280
6/24/08 11:53:22 AM com.apple.loginwindow[32] Shutdown NOW!
6/24/08 11:53:22 AM com.apple.loginwindow[32] System shutdown time has arrived
6/24/08 11:53:22 AM mDNSResponder mDNSResponder-171.4 (Apr 20 2008 11:59:52)[16] stopping
6/24/08 11:53:22 AM com.apple.SystemStarter[27] Starting FTDI ReEnumerate
6/24/08 11:53:22 AM /usr/sbin/kdcmond[34] dnssd_clientstub read_all(3) failed 0/28 0
6/24/08 11:53:23 AM com.apple.SystemStarter[27] kextunload: unload kext /Library/Extensions/tun.kext succeeded
6/24/08 11:53:24 AM com.apple.SystemStarter[27] kextunload: unload kext /Library/Extensions/tap.kext succeeded
6/24/08 11:53:45 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
6/24/08 11:53:45 AM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
6/24/08 11:53:45 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
6/24/08 11:53:45 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
6/24/08 11:53:45 AM kernel npvhash=4095
6/24/08 11:53:45 AM DirectoryService[11] Launched version 5.3 (v514.19)
6/24/08 11:53:45 AM kernel hi mem tramps at 0xffe00000
6/24/08 11:53:45 AM kernel PAE enabled
6/24/08 11:53:45 AM kernel 64 bit mode enabled
6/24/08 11:53:45 AM kernel Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
6/24/08 11:53:45 AM kernel standard timeslicing quantum is 10000 us
6/24/08 11:53:45 AM kernel vmpagebootstrap: 972204 free pages and 76372 wired pages
6/24/08 11:53:45 AM kernel migtable_maxdispl = 79
6/24/08 11:53:45 AM kernel 97 prelinked modules
6/24/08 11:53:45 AM kernel AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
6/24/08 11:53:45 AM kernel AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
6/24/08 11:53:45 AM kernel Loading security extension com.apple.security.TMSafetyNet
6/24/08 11:53:45 AM kernel calling mpopolicyinit for TMSafetyNet
6/24/08 11:53:45 AM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
6/24/08 11:53:45 AM kernel Loading security extension com.apple.nke.applicationfirewall
6/24/08 11:53:45 AM kernel Loading security extension com.apple.security.seatbelt
6/24/08 11:53:45 AM kernel calling mpopolicyinit for mb
6/24/08 11:53:45 AM kernel Seatbelt MACF policy initialized
6/24/08 11:53:45 AM kernel Security policy loaded: Seatbelt Policy (mb)
6/24/08 11:53:45 AM mDNSResponder mDNSResponder-171.4 (Apr 20 2008 11:59:52)[16] starting
6/24/08 11:53:45 AM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
6/24/08 11:53:45 AM kernel The Regents of the University of California. All rights reserved.
6/24/08 11:53:45 AM kernel MAC Framework successfully initialized
6/24/08 11:53:45 AM kernel using 16384 buffer headers and 4096 cluster IO buffer headers
6/24/08 11:53:45 AM kernel devfsmakenode: not ready for devices!
6/24/08 11:53:45 AM kernel IOAPIC: Version 0x20 Vectors 64:87
6/24/08 11:53:45 AM kernel ACPI: System State [S0 S3 S4 S5] (S3)
6/24/08 11:53:45 AM kernel mbinit: done
6/24/08 11:53:45 AM kernel Security auditing service present
6/24/08 11:53:45 AM kernel BSM auditing present
6/24/08 11:53:45 AM kernel rooting via boot-uuid from /chosen: 0DBAAC14-6DD7-3E77-B71F-F1A915C2BCED
6/24/08 11:53:45 AM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
6/24/08 11:53:45 AM kernel FireWire (OHCI) TI ID 8025 built-in now active, GUID 001cb3fffe865bee; max speed s800.
6/24/08 11:53:45 AM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/FUJITSU MHW2160BHPL Media/IOGUIDPartitionScheme/Customer@2
6/24/08 11:53:45 AM kernel BSD root: disk0s2, major 14, minor 2
6/24/08 11:53:45 AM kernel CSRHIDTransitionDriver::start []
6/24/08 11:53:45 AM kernel CSRHIDTransitionDriver::switchToHCIMode legacy
6/24/08 11:53:45 AM kernel Jettisoning kernel linker.
6/24/08 11:53:45 AM kernel Resetting IOCatalogue.
6/24/08 11:53:45 AM kernel GFX0: family specific matching fails
6/24/08 11:53:45 AM kernel Matching service count = 1
6/24/08 11:53:45 AM kernel Matching service count = 2
6/24/08 11:53:45 AM kernel Matching service count = 2
6/24/08 11:53:45 AM kernel Matching service count = 2
6/24/08 11:53:45 AM kernel Matching service count = 2
6/24/08 11:53:45 AM kernel Matching service count = 2
6/24/08 11:53:45 AM com.apple.SecurityServer[21] Entering service
6/24/08 11:53:46 AM kextd[10] 406 cached, 0 uncached personalities to catalog
6/24/08 11:53:47 AM kernel Previous Shutdown Cause: 5
6/24/08 11:53:47 AM kernel NVDANV50HAL loaded and registered.
6/24/08 11:53:47 AM kernel GFX0: family specific matching fails
6/24/08 11:53:47 AM kernel ath_attach: devid 0x24
6/24/08 11:53:47 AM kernel Override HT40 CTL Powers. EEPROM Version is 14.4, Device Type 5
6/24/08 11:53:48 AM kernel mac 12.10 phy 8.1 radio 12.0
6/24/08 11:53:51 AM kernel USBF: 11.869 AppleUSBHubPort: Port 1 of Hub at 0x1a000000 about to terminate a busy device (IOUSBCompositeDevice) after waiting 10 seconds
6/24/08 11:53:51 AM kernel yukon: Ethernet address 00:1b:63:96:ae:8a
6/24/08 11:53:51 AM kernel AirPort_Athr5424ab: Ethernet address 00:1c:b3:b2:f9:eb
6/24/08 11:53:51 AM kernel USBF: 12.170 CSRHIDTransitionDriver[0x6def780](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
6/24/08 11:53:51 AM kernel CSRHIDTransitionDriver... done
6/24/08 11:53:51 AM rpc.statd[29] statd.notify - no notifications needed
6/24/08 11:53:51 AM bootlog[44] BOOT_TIME: 1214322819 0
6/24/08 11:53:51 AM kernel IPv6 packet filtering initialized, default to accept, logging disabled
6/24/08 11:53:51 AM fseventsd[37] bumping event counter to: 0xbc886b (current 0x0) from log file '0000000000bc6398'
6/24/08 11:53:51 AM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[32] Login Window Application Started
6/24/08 11:53:51 AM /usr/sbin/ocspd[58] starting
6/24/08 11:53:57 AM com.apple.SystemStarter[27] Starting FTDI ReEnumerate
6/24/08 11:54:22 AM kernel AppleYukon2 - en0 link active, 100-Mbit, full duplex, flow control disabled port 0
6/24/08 11:53:57 AM com.apple.SystemStarter[27] Initializing tun devices
6/24/08 11:53:57 AM com.apple.SystemStarter[27] Initializing tap devices
6/24/08 11:53:57 AM com.apple.SystemStarter[27] kextload serialization lock busy; sleeping (89 retries left)
6/24/08 11:53:57 AM com.apple.SystemStarter[27] kextload: /Library/Extensions/tap.kext loaded successfully
6/24/08 11:53:58 AM com.apple.SystemStarter[27] kextload: /Library/Extensions/tun.kext loaded successfully
6/24/08 11:54:22 AM kernel tap kernel extension version 20080121 <[email protected]>
6/24/08 11:54:22 AM kernel tun kernel extension version 20080121 <[email protected]>
6/24/08 11:53:53 AM configd[14] setting hostname to "mitch-macbook.local"
6/24/08 11:54:22 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 11:54:02 AM kextd[10] writing kernel link data to /var/run/mach.sym
6/24/08 11:54:47 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 11:54:48 AM loginwindow[32] Login Window Started Security Agent
6/24/08 11:54:49 AM SecurityAgent[87] User info context values set
6/24/08 11:55:12 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 11:55:36 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 11:55:36 AM SecurityAgent[87] Login Window done
6/24/08 11:55:36 AM loginwindow[32] Login Window - Returned from Security Agent
6/24/08 11:55:36 AM loginwindow[32] USER_PROCESS: 32 console
6/24/08 11:55:36 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[81]) Exited: Terminated
6/24/08 11:56:08 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 11:56:30 AM /System/Library/CoreServices/coreservicesd[53] SFLSharePointsEntry::InitializeSPNode: dsOpenRecord returned -14136
6/24/08 11:56:30 AM /System/Library/CoreServices/coreservicesd[53] SFLSharePointsEntry::InitializeSPNode: dsCreateRecordAndOpen returned -14135
6/24/08 11:56:31 AM kernel disk0s2: 0xe0030005 (UNDEFINED).
6/24/08 11:56:35 AM com.apple.ATSServer[100] FODBError: FODBReconcileWithAuxFile called: kAuxFileHeadersDontMatchErr
6/24/08 11:56:50 AM /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer[100] FODBReconcileWithAuxFile - font/annex_aux failed with -3129 at line 2233
6/24/08 11:56:50 AM com.apple.ATSServer[100] FODBCheck: New annex file created
6/24/08 11:57:17 AM Dock[101] [QL ERROR] Generator database update takes too long... we will use what we currently have

Startup time for ipod

Hi
What would you say is a normal startup time for the built in ipod app? Mine take 8 seconds to start if it isn't present in memory.

Yesterday, some podcast appeared in my playlist which I had deleted a long time ago. We're talking weeks here.
It was podcasts I had downloaded to the phone through wifi, and never synced to itunes.
I'm starting to suspect that there may be references to podcasts which no longer exists, or do exist but that the ipod app for some reason can't access them. I believe that the ipod app halts for 20 seconds because it's trying to locate/read these files but can't access them for some reason, then it times out.
I'm going to do a complete delete of all the contents on the phone this evening, the delete process which the phone states may take up to 2 hours, and then resync the phone and see if that solves the problem.

Bring LabVIEW built exe to front on subsequent launch attempts

I'm using LV 2012 on Windows 7. I have a LV built executable whose window is commonly minimized by users. Since there can only be one instance of the exe, if a user attempts to click the shortcut while the exe is already running, nothing happens. I'd prefer that my app window instead open and move to the front. I'd swear that LV executables used to do this all on their own, though I don't know if that is due to a change in LV or to Windows. I'm willing to do it programmatically, but no event seems to get triggerend when you "re-launch" the exe. Anybody know a trick for doing this?

There may be an easier way, but...
You could modify your INI file to allow multiple instances of the program. Then in the program you can set it so it does NOT show the front panel at startup and add a check at startup using "Find Window" from the windows API to determine if the window already exists. If it does (i.e. you get a valid handle) you can use that handle to move the already running window to the front (also using the windows API as was suggested above) and quit the program, because another instance is already running. If it does not exist, then use a property node to show the front panel.
The only possible issue here is, you will always get a valid handle to the window since yoru program will be running because you just opened it, whether it is the first or second instance. I am not a windows API wiz by any means, but you may be able to determine if you get multiple handles vs. if you just get one valid handle for a window name, and use that logic to your advantage. This is just a stab in the dark.
CLA, LabVIEW Versions 2010-2013

Query0;Runtime error time limit exceeded,with parallel processing via RFC

Dear experts,
I have created a report on 0cca_c11 cube and while running my report when i give cost center group which contains many cost centers , my report executes for long time and at last gives message
"Error while reading data;navigation is possible" and
"Query0;Runtime error time limit exceeded,with parallel processing via RFC"
please tell me what is the problem and how can i solve this
Regards
Shweta

hI,
Execute the Query in RSRT with Execute and Debug option.
Select SQL statements toknow where exactly it's taking time.
Let us know the details once you done.
Reg
Pra

Labview Built Executable - Long Runtime Startup Time

Similar Messages

Maybe you are looking for