LabVIEW can't find NI-DAQ driver (error 10240).

NI-DAQ is installed, and all the tests in the configuration utility work
fine with the PCI 1200 card. I can see a sine wave from a function
generator, so NI-DAQ works. But no DAQ VIs run, neither the examples
included with LabVIEW nor test programs I've written myself. Error message
10240 is always displayed: "NI-DAQ: LV can't find NI-DAQ driver."
I am working with an older setup, trying to recover an experiment from years
ago. It's a Power Macintosh 7500 with a 100MHz 601 processor and a PCI 1200
DAQ card. LabVIEW 4.0 installed. I've tried downloading several versions
of NI-DAQ from the NI site, but I can't find any support for LabVIEW 4.0.
Currently NI-DAQ 6.6.1 is installed, the version recommen
ded on the site for
Power Macs.
Does this version of NI-DAQ not work with LabVIEW 4.0? If not, what version
of NI-DAQ will work? Is there some way to tell LabVIEW where the NI-DAQ
driver is?
Upgrading LabVIEW or the hardware is a last resort. I just want to get this
experiment running as soon as possible.
My email address is [email protected]

Thanks. But the version of NI-DAQ that was installed when I wrote the email
was NI-DAQ 6.6, and still the error message appeared. I've since pulled the
card and put it into a PC with a more recent version of Lab VIEW and it
works.
"Ryan M" wrote in message
news:[email protected]..
> The latest version of NI-DAQ supporting LabVIEW 4.0 is NI-DAQ 6.6.
> More information regarding this can be found in National Instrument's
> Knowledge Base at:
>
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/d8d43c0b1b
881101862569eb005cda39?OpenDocument
>
> Ryan Mosley
> National Instruments, Applications Engineer
> http://www.ni.com/exchange

Similar Messages

  • How do I get past "can't find valid dvd player" error?

    This is regarding a G4 powermac running Tiger 10.4.3
    My Sony dual layer DRX-720UL/T seems to work fine with DVD-ROM content. My kids use it for DVD-ROM games and I had no problem installing Tiger. Problem comes in when I open "DVD player" and get a "Can't find valid dvd player," error. They're connected via Firewire 400, and I've tried the USB link, just to see, but the same error comes up. I'm fairly certain that I viewed a DVD before upgrading to Tiger. The Sony is supposed to be fully mac compatiable, and even comes with Toast light 6. Again all seems to be well except for the fact that DVD player won't allow me to view a NTSC DVD. No matter how many I try.

    What drive was in this G4 prior?
    If you did not have a DVD drive, you need to use Pacifist to extract & install DVD Player.app; downloading or drag&drop won't work.
    Also, Sony drives are probably the worst when it comes to compatability; one specific model may work fine, and others not. This should be less of an issue in Tiger, but only if the problem is other than the optical drive firmware, about which you can do nothing (on a Mac), unlike Pioneer & NEC drives that have mac-based flashers available.
    If DVD Player was installed previously, based on having a DVD drive prior to Tiger install, you may want to try running the 10.4.3 Combo updater over your existing install.

  • Windows 7 Install - Can't find my hard-drive!

    Hi guys, i'm hoping someone can help. I've recently bought a brand new Toshiba Satellite pro L650 (PSK1KA-02D01E) running Windows 7 After a few weeks, things started to get really slow. Then I woke up one morning to discover it stuck on the first screen when I turn it on.
    I thought I had a virus, so then decided to do a full re-format and re-install windows. After I formatted the correct partition, I went to install Windows 7 again Only for it to say "windows could not detect a disc drive" it asks me to install drivers for the hard-drive, which I can't seem to find.
    it's a sata hard-drive (TOSHIBA MK6465GSX) I think is the model number. I can not find the hard-drive drivers anywhere. The other strange thing, is every now and then, it finds the hard-drive, but states that windows can not install onto that drive (even when I format it, try to add a partition and so forth) I have been into bios, I don't really know a great deal of what I am looking at, but it sometimes states my hard-drive is there, and other times it does not.
    I am so desperate to get this fixed. Does anyone have any ideas? I live pretty remotely so taking it back and getting it fixed is not ideal.. but maybe necessary.
    Thanks in anticipation..
    - Gavin.

    It sounds like the hard drive is dying.  The Win7 install shouldn't need a driver for the drive.

  • Where can I find a print driver for my e-mac running os9.2

    Where can I find a print driver for my e-mac running os9.2

    Actually the best place is the web site for the printer. You'll also need the model, but there are still some OS9 drivers out there.
    You must supply the printer make and model for people here to help further.

  • I can't find the yosemite driver for my epson r3000 printer.

    I can't find the yosemite driver for my new epson r3000 printer. I am using 10.10.1. The Epson website says to find the driver by going to the App store and looking for updates. I did that and didn't find any.  In "Printers and Scanners" in System Preferences I notice that the computer is aware that I am connected to the printer (via USB) but a message  at the bottom of the window says that "Software for this printer isn't available from Apple. Contact the printer's manufacturer...".  What to do?

    See -> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 173163&prodoid=63090295&infoType=Downloads&platform=All.
    It looks as though Epson has a driver compatible with Yosemite.
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10.1, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • How can I find the JDBC Driver version

    Hi,
    How can I find the JDBC Driver version installed on my Sun Solaris machine which
    has Weblogic Server 7.0 installed on it. Is there some kind of tool/command to
    do so or does Weblogic console say something about it
    Thanks
    Parikshit Khanna

    Parikshit Khanna wrote:
    Hi,
    How can I find the JDBC Driver version installed on my Sun Solaris machine which
    has Weblogic Server 7.0 installed on it. Is there some kind of tool/command to
    do so or does Weblogic console say something about it
    Thanks
    Parikshit KhannaThere is a jdbc DatabaseMetaData call getDriverVersion().
    The best thing to do is to download Oracle's latest appropriate
    driver from their site, and edit the start-weblogic script to
    make sure the downloaded driver is ahead of any weblogic stuff in
    the server's classpath. We do ship a driver, but Oracle usually
    has a newer better one very soon after that...
    Joe

  • HT3669 I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS.  Is it possible to connect these directly without networking?  Where can I find the printer driver?

    I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS.  Is it possible to connect these directly without networking?  Where can I find the printer driver?

    It turned out that WD is the big bad guy in this game.
    According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
    So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
    Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
    On the other hand, with WD GP 1Tb there is no problems at all for ages.
    thanks guys, thread is closed

  • Where can i find the sound driver for my Toshiba Satellite U505-S2970 ?

    Where can i find the sound driver for my Toshiba Satellite U505-S2970 ?
    Please help me. 
    Thanks

    If "Realtek High Definition Audio" is listed under the "Sound, video and game controllers" in the Device Manager then that is your sound driver. Some people have had luck with uninstalling the Realtek HD audio driver from their computer via the Device Manager (be sure to check the "Delete driver software for this "), and then reinstalling it. You can get the latest version of the Realtek HD audio driver from the Realtek download site.
    Many of us who have the Realtek HD sound driver have had to make several tweaks to improve the sound. Opening the Realtek HD Manager and enabling Loudness Equalization and setting the equalizer to Powerful helps with some of the low audio issues some of us have experienced with the Realtek HD sound drivers.

  • I had to get a new ipod....they said I just needed to plug it in and sync to my itunes.. I get an error 1413 when I try to follow the instructions to restore.  I can't find any information on error 1413, what does this mean?

    I had to get a new ipod....they said I just needed to plug it in and sync to my itunes.. I get an error 1413 when I try to follow the instructions to restore.  I can't find any information on error 1413, what does this mean?

    Now it keeps saying that it is restored but there is still no music or video on it. And a new error is coming up that says "We could not complete your iTunes store request.The iTunes Store is temporarily unavailable. Please try again later."

  • I can't find my printer driver on my macbook pro with mavericks......

    I can't find my printer driver on my macbook pro with mavericks......

    Hello kenhale26,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/HT3669
    Apple delivers third-party software for scanners and printers using Software Update.
    Best of luck,
    Mario

  • Can't find my external drives in Lion.  Where did they go in Finder when I upgraded?

    Can't find my external drives in Lion.  Where did they go in Finder when I upgraded?

    Check the settings in the General and Sidebar tabs of the FInder's preferences.
    (66775)

  • I can not find a suitable driver for my hp deskjet 1280 for OS X 10.7 Lion (macbook) Please help.

    I can not find a suitable driver for my hp deskjet 1280 for os x 10.7.  Since updating my software the printer will only use basic functions and prints only black and white, how do I enable the printers full capabilities? Thanks!

    Hi,Officially the printer no longer supported on OS X 10.6 or above, therefore the reduced quality due the Generic driver usage:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&task Id=120&prodSeriesId=439162&prodTypeId=18972&prodSeriesId=439162&objectID=c018563 59
    However, you may try the 3rd party HPIJS print drivers which list your printer as supported and will more likely provide you a better qualiity then a Generic driver.
    Be sure to install any of the 3 required downloads and follow the steps to Set Up the printer:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
    Shlomi

  • HT4790 I can not find my hard drive after encryption

    I have a macbook pro I upgraded to Mountian lion from 10.6.8.
    Went through the encryption process. Now my user can not find his hard drive after a re boot
    Steve

    Uninstall the program. It should have come with an uninstaller. If not, contact the developer for instructions.

  • Flashing file folder - can't find the hard drive-imacG3 - 9.1

    When I attempted to start up I got a flashing "?" in a folder. I loaded the hardware test CD and everthing tested fine but no hard drive was listed. I loaded the software install CD and got the message"disk is unreadable. Do you want to inintialize". Options were Standard 9.5 GB or extended. Is there anything I can do other than initialize and lose everything? If I do initialize should it be standard or extended? If the hardware test can't find the hard drive how did the software install disk recognize it. Any ideas? Thanks
    imac G3   Mac OS 9.1.x   ibook G4 OS10.3.9

    jalacqua...
    Unfortunately both of those must run from a bootable CD or bootable device that isn't the startup volume. And, by the way, both of those applications do cost money.
    TechTool Pro comes from Micromat and you would need version 3.0.9 (final for Mac OS9) from them.
    DiskWarrior is a bit tricky as the CD is bootable only in Mac OS 10 and can cripple an iMac Slot Loading machine that hasn't had the Firmware update. They include an older Mac OS 9 version on that CD however you would have to install it into something that is bootable.
    ...Ron

  • Itunes 10.4.1 64bit for Win 7 can't find quicktime, QTCF.dll error -- HELP PLEASE!

    Every time I install itunes 10.4.1 64bit for Win 7, it says it is unable to find quicktime, then instructs me to uninstall itunes then install it again. I've done this several times but still have the same problem. There is also another promt that says quicktime can't find the entry point and there's an error having to do with QTCF.dll ... what is this and how can I get my iTunes to work? Help please!

    hi guys i found the solution from a wizard of the community and it works, so u may try as follows:-
    Correct Answer by b noir on Aug 24, 2011 8:13 PM
    Let's try a standalone QuickTime.msi update. It may not install correctly either, but fingers crossed at least the error messages we get from that install may better indicate the nature of the trouble with the QuickTime install.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the QuickTime.msi to do a standalone QuickTime.msi install.
    Does it install properly for you? If so, does iTunes install properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for