LabVIEW Consulting Company Searching for Resumes
EvaluMation, LLC is currently accepting resumes and searching for engineering talent. We are especially interested in candidates with a solid electrical/programming background and a strong work ethic. Experience with National Instruments products is always a plus!
Some desirable skill sets include
LabVIEW/TestStand Certifications
C/C++/Matlab Programming
Object Oriented Design Experience
Automation/Instrumentation
RF Test Experience
Interfaces Well With Customers
Engineering Degree
Security Clearance/Ability to Obtain Clearance
This positon is located in sunny Albuquerque,NM and relocation may be available
Please email your resumes to me at [email protected]
Thanks
Matthew Dubuque
EE/CLA/CTD
www.evalumation.com
You can use wireshark to do the investigation.
http://www.wireshark.org/
Tim
Johnson Controls
Holland Michigan
Similar Messages
-
Consulting Company Searching for Resumes
EvaluMation, LLC is currently accepting resumes and searching for engineering talent. We are especially interested in candidates with a solid electrical/programming background and a strong work ethic. Experience with National Instruments products is always a plus!
Some desirable skill sets include
LabVIEW/TestStand Certifications
C/C++/Matlab Programming
Object Oriented Design Experience
Automation/Instrumentation
RF Test Experience
Interfaces Well With Customers
Engineering Degree
Security Clearance/Ability to Obtain Clearance
This positon is located in sunny Albuquerque,NM and relocation may be available
Please email your resumes to me at [email protected]
Thanks
Matthew Dubuque
EE/CLA/CTD
www.evalumation.comI went back in and on the 4th try it did finally download for me. I was getting a time out problem. The link is active.
Thank you for checking on this link also. Now hopefully I will have it up and running this weekend. This is a very informative forum, I look forward to reading the posts.
Everyone have a great weekend!!
Molly :) -
Small Company looking for a LabVIEW consultant (remote consultant welcome)
Hello,
We are a small company looking for a LabVIEW consultant. This is about a 3-6 month project. The consultant must be familiar with NI hardware product as well. Please send me your resume/CV. In your email please state the following: years of experience, educational background, your hourly requirements, your location, and the amount of time you will be able to provide.
Please removes spaces on the email below.
int e g r at e d devi c e s @ yah oo. c o mI'm not sure if this is frequent on the NI forums, since I believe NI validates user information prior to issuing an account that allows them to post to the forum. But usernames (like mine) don't provide immediate identifications; you have to ask for it.
Apparently Job Scams have become more frequent. See the list of tips on the following site, (I have no relationship with this site. It just came up in a google search).
http://www.identityhawk.com/IdentityProtectionTips-inHonorof-LaborDay
5 Steps to Take Before Applying for a Job
1. Email - the company to get information about the job. Do not provide any personal information to them upfront.
2. Phone - speak to an official at the company and ask about the job. Be assured that it is legitimate.
3. Meet - at the company site to assure it is a real company. If you cannot meet, and the company is in your town, drive by to see the facility, (possibly using google maps to view the site).
4. Verify - see if you can find a person who has worked at the company or call a Chamber of Commerce of Better Business Bureau to assure the legitimacy of the company. Search online for legitimate information about the company, search online for any complaints of non-legitimacy. State Entity sites typically have the name of the company and how long they have been in business.
5. Apply - once you are assured the company is legitimate, it is safe to apply; but you should still not supply highly personal information like bank accounts until you are officially hired. -
Labview developer-search for remote work
I have 3 year experience as Labview developer. I have good skils in controling devices using different interfaces and automated tests.
I'm searching for some small projects which can be resolved using remote work. If necessary I can travel several time (in Europe).
Also I can aproach any specific project if initial data & rquirement are very clear defined and is no time presure.
If interresed e-mail to [email protected] .
Thank you!Hi there,
Sorry but I have already taken on a new contract. If you send me your email address I can pass your request to some people who could help you.
Best regards
Neil
nrp
CLA -
BP search for General and Company Code roles
Hi
On the modify Money Market Transactions (TM_52) (and some similar to it for other products TS02, TM32, TO02), if i go to the Partner Assignment Tab and I try to assign a bp for the General or the Company Code roles, the bp search program give me no results.
If i try to do the search for the Counterparty role it gives me the results I expect.
Is there any reason for do not give any result when these roles are the primary roles that, of course, the bp I choose has? Is it a program problem (this program has returned me some dumps and I implemented some Notes on it before)? If so, is there any solution?
I want to assign these roles because I hope that these assignments with these roles modify the payment data or the master data of the transaction.
ThanksHi
This is a very common topic.
look at this thread:
Authorization in reports
Here's a starting point ...
http://help.sap.com/saphelp_bw33/helpdata/en/72/eeb23b94c6e54be10000000a11402f/frameset.htm
Outline steps...
In RSSM:
Create authorization object
Make authorization object applicable to relevant InfoProviders
In PFCG:
Add authorization object to new or existing Roles with appropriate field assignments
Make User/Role assignments
Reg's
Edan -
How to search for a text node with a particular value in an xml document with labview
supposing i have the following xml document:
<head>
<book>
<bookname>zio</bookname>
<author>dan</author>
</book>
<book>
<bookname>the spear warrior</bookname>
<author>britney</author>
</book>
<book>
<bookname>the beard</bookname>
<author>derrick</author>
</book>
</head>
i want to search for the author of the book "the beard" using for example the V.I Get first match of labview to access the the node with value "the beard" and then use Get next sibling V.I and Get node text content to get get the author of this book..so my question is how do i write the xpath expression for Get first match so as to access the node with bookname "the beard" instantyly? am trying to minimise the use of loops because they increase the time duration,..thank you (NB:i dont want to use Get all Matched V.I because it obliges me to use a loop in order to access the name derrick and this increases the time duration for my v.i)
Solved!
Go to Solution.Since it's all text, why not use a real quick Match Pattern (or Regular Expression, but you don't need that much power here), see attached.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ
Attachments:
Two-stage match demo.vi 8 KB -
Vi will not open, instead Labview opens a search window for the vi
I have a vi in 7.1 that, while running, locked the PC. After rebooting, Labview could no longer open the code. Instead it acts as if searching for a sub-vi it cannot find.....itself. I've seen similar questions posted from years ago with the rare and only solution from an NI engineer using LabView development utilities.
Hi Freestream
What information were you able to find? Do you receive an error when you try to open this file? You can access the labview error log from C:\Documents and Settings\(User Name)\Local Settings\Temp for Windows 2000 or XP and C:\users\(User Name)\Documents\LabVIEW Data\lvfailure log for Windows Vista. There is a second log file for the previous time LabVIEW was run LabVIEW_versionsusername_log.txt. Also try opening the VI in a later version of LabVIEW. Let us know if you get a specific error message or .cpp error. Since the VI crashed in the middle of operation its also entirely possible that it has become corrupted and this error will not be reproducible.
Thank You
Eric Reid
National Instruments
Motion R&D -
When I pause a rented movie and then try and finish watching it, I am told that I have already rented this movie and it has not been downloaded. I am instructed to go to iTunes on the AppleTv menu, but there is no download section on any menu and search for rentals only gives me a continuous spinning wheel?
The time it takes to load is dependent on your network. Rentals made on ATV won't be available on any other device.
What is your current connection. Use speedtest.net
Make sure DNS is set to automatic (settings - general - network)
If on wifi try Ethernet
Go to istumbler (Mac) or netstumbler (PC) to get a report of the network, look for signal strength and noise -
Hello,
Labcode is a software consulting company. Our main services include designing, development, optimizing and problem solving by using LabVIEW and/or Teststand. Our Designers are well trained (by National Instruments) and have been designing large LabVIEW projects for years. We are using Coding Style Guidelines and Code Reviews to obtain best possible code quality and performance to our customers!
Best regards,
Labcode
info(at)labcode.fi
www.labcode.fiDear Sir, I am sure you are looking for somebody, who is a resident of USA and having experience in LabView Programming. I am attaching herewith my resume, should you find in it a suitable candidate for your project I will be glade to share my experience, knowledge and experience which I have acquired since last 12 years. I statarted LabView Programming with ver 2.00 for Mac and I have programmed my last programs in ver 7.1 for Windows . Most of my work was interfacing testing and measuring instruments (both mechanical and electrical) with PC and using LabView for data acquisition, analysis and presentation. I do have an exposure to Allen Bradly PLC. Thanking you and hoping to have an encouraging response.- Sincerely Arvind Engineer
Attachments:
AMERESUME.doc 29 KB -
When in sleep mode iPhone 4 loses signal but as soon as its on again it searches and finds signal easily but because of this not getting calls or text msges and because it's searching for signal all the time battery not lasting
Here are some observations and a suggestion.
1) I mentioned before, that the number of views of this discussion forum is fast approaching 100,000. I suppose relative to all iPhones sold that is not a great percentage, but 100,000 still sounds pretty impressive to me. Consider also that many people probably have this same Sim problem and are not viewing this discussion forum because thay do not know it exists. How many people are REALLY experiencing this problem? Who knows. But I suspect it is more that 100,000.
2) To the best of my knowledge, Apple does not consult these forums as a guide to awareness of product performance. It may be company policy, but most of the time when I speak to an Apple employee they seem remarkably unaware of the "Top Stories" in the Apple Discussion Forum. This, despite the fact that my personal experience with customer service at Apple is excellent. So, as much as we of this discussion forum are confident SOMEONE important at Apple is reading all our posts and taking them to heart...I am not so sure.
3) I have been told over and over that the best way to gain Apple's attention regarding a problem is to post a comment on their Feedback Site. One comment about a problem is pretty worthless. 100,000 comments on the same issue, I'm guessing, will really get their attention.
4) Some folks have mentioned a recall to address this problem. Although such a thing is always a possibility, I don't see it happening. Why? When the brakes on a Toyota don't work, or that Toyata starts to accelerate without driver intention...well, that involves human life and the stakes are quite high. For many reasons you would see the automotive industry eventually be forced into a recall program under such a situation. But, a phone APPEARS to not nearly be such a life and death device. Or is it? My daughter's iPhone 4S developed a "SIM FAILURE" on the same day her car broke down in the middle of the very rural area we live at around 10:00 pm. She is 17 years old and was coming home from high school play practice. You can imagine the anxiety I and her mother felt when she did not arrive home on time. She eventually walked about a quarter mile to a house of a stranger and had to ask to use their phone to call us. Now, I am not saying that strangers where I live are not to be trusted. But, in addition to being worried out of my mind, I was not happy that an inoperative iPhone 4S caused my daughter to be put in this situation. My biggest concern now is...when will my daughter's iPhone become inoperative again due to SIM FAILURE?
5) The more folks in this discussion forum who post a comment about this issue in Apple's feedback site the more pressing this issue is going to be perceived by Apple. So, I like others, encourage all of you to do so. If this seems like a lot of effort, I offer you these few sentences below that you could just copy and paste into the feedback site.
The link to feedback site is: http://www.apple.com/feedback/
Feel free to use copy/amend/whatever the following as you wish:
Dear Apple,
I wish to register a strong concern about my iPhone's unpredictable inoperability due to failures somehow associated with it's SIM technology. For me, I do not consider this just a significant lack of convenience, but a significant safety issue. Should I need my phone in an emergency situation where it is experiencing a SIM FAILURE, I believe the iPhone will have put me at risk. I would ask you to please give fixing this problem your greatest priority and effort.
Sincerely, XXXX -
Searching for missing column names in a single database.
I have a database with about 100 tables, database gets generated using entity framework. The application has been enhanced so users deployed with older version of the application need to upgrade to newer version. The database generated is both versions
is same name.
Now, the older version is missing some tables and column names that are in new database.
Is there a script that can search for missing fields in a single database as described in this situation?
Below is my script. Basically, nameofdatabase would the database generated and that already existing. If you install the application and database already exits no new database will be created.
SELECT * FROM (Select TABLE_CATALOG, Table_name,COLUMN_NAME FROM nameofdatabase.INFORMATION_SCHEMA.COLUMNS) a FULL OUTER JOIN (SELECT TABLE_CATALOG, Table_name,COLUMN_NAME FROM nameofdatabase.INFORMATION_SCHEMA.COLUMNS) b ON b.COLUMN_NAME=a.COLUMN_NAME and
a.TABLE_NAME=b.TABLE_NAME WHERE b.COLUMN_NAME is null or a.COLUMN_NAME is null ;There is a great tool called SQLCompare provide by www.red-gate.com
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do?
Yes, that kind of tallies with my experience ... after 3 days of useless iPhone 3G (BTW, killing 3G on the phone and relying on acquiring AT&T 2G didn't help, it still locked onto T-Mobile with the result that it was draining battery and rebooting frequently!), I ended up visiting the local Apple Store.
Although the visit was not to resolve the iPhone problem, whilst there I happened to cycle the phone and due to the store having a local AT&T cell, the strength of the local signal meant that I finally re-acquired a AT&T 3G signal ... once locked on again the phone was fine for the next day.
Nett outcome of this is that I would prefer to lay most of the blame for this debacle on the poor state of 3G support both by AT&T (and US carriers in general), maybe exacerbated in my case by two related events (the local DNC in Denver, which saturated local AT&T cells including 3G and a proliferation of v2.0.0 and v2.0.1 firmwares on iPhones in town, which dragged cell coverage into the weeds).
It would be nice for future sanity if AT&T and T-Mobile could at least resolve the ability to acquire/release the iPhone gracefully, otherwise I'll be very sceptical of travelling back to the US with only my iPhone, as a self-employeed consultant I can't afford to be out of touch for three days again! -
I've been trying to find more information on this and I apologies if this has already been answered. I just don't know the correct way to ask this. We have a SharePoint List at the company that we have people input information into different columns. The
problem is most of those information are very repetitive. Is there a way for me to search more then one field text in the column and just input that same information in?
ex:
Column 1
Column 2
Date:
883851
MidWest
User input
8831518
MidWest
User input
On the search field in the SharePoint List, I would need to search for 883851, 8831518 etc, would view those requested numbers, then I would click edit and change dates to those rows. Does that make sense? I'm sorry I'm fairly new at sharepoint.I think what you're asking is about having repetitive options in a list, show up easily for new items being created.
This can be done by setting the columns that contain repetitive information to Choice fields. In the configuration of the Choice field, check the box for "Allow custom values". Now as users are entering data into the list, the dropdown of options
for a given field grows and users can quickly see and select previously entered and thus repetitive values for the given fields.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint -
Searching for the fields of a table(very very urgent)
Hi all,
i am in graet trouble now.i am searching for the fields like
1)country of origin where the finished good is created.
2) customer sales order number
3)customer sales order line number
i am writing a report for delivery order.in this report i have to refer customer PO & customer SO .
i mean, my company has a customer ( seagate) & seagate has a customer (let maxtor).initially maxtor will give a PO to seagate then seagate will raise a SO againest maxtor.
Then seagate will send PO number(of maxtor), PO line number,SO number(seagate), SO line number(seagate) to our company.
Then i have to write a report for sales order & delivery order.in these reports i have to refer seagate PO number & seagate SO number for reference.
i got PO number as vbkd-bstkd but not getting any field for reference Sales order.plz advice me on this. it is very very urgent.
ur idea is highly appreaciated.
Thank u very much.
Regards
pabitracheck out tables VBAK(sales order header), VBAP(sales items)
-
Searching for Data in the Report for a non-selected column in display.
Hello,
I have an interactive report as given below:
select user, dept_name, sal, description, title from hr;
Now, in the report display options I remove the title and description from the display as you know title and description are 2000 characters each.
If I show then it takes the whole page to display one record and with this option I can search any text in the Title or Description columns.
Now, I have hidden these two columns and when I search I do not see any records.
Can any one tell me how to achieve this behaviour.
What I am looking is, I do not show the column 'TITLE' or 'DESCRIPTION' and user show be able to search for any important data inside these columns.
Please let me know how can we do this.
Please point me to an already published article or solution or any help on this type.
Appreciate your help on this.
thanks
Edited by: user648778 on Sep 18, 2008 6:13 PMAs far as I can see this will not work. You could use a trick and make a query like this:
SELECT USER, dept_name, sal,
apex_item.hidden (10, mgrdescription || title)
|| '<img src="#IMAGE_PREFIX#some_nice_icon.gif">' title_description
FROM hrThis would not display the title and description but an image and it would give you a possibility to filter on those.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------
Maybe you are looking for
-
Can we use mutltiple Apple ID's on the same iPad to download apps?
I am trying to navigate the use of the volume purchase program at our school for purchasing apps on our iPad's. I also wondered if a person could download free apps using one Apple ID, then login out and log back in using our common Apple ID we use f
-
Additional Excise duty not posting to G/L account
Hello, While capturing excise invoice in J1IEX, i am entering following value as: Basic Excise duty: Rs.140 Additional Excise duty: Rs.40 Education Cess: Rs.7 Sec.Edu Cess: Rs.1.4 After posting follwoing accounting entries occuring: Basic Excise duty
-
Corrupted Template Folder In Mail
In attempting to create a custom stationery template, I apparently corrupted one of the template folders. The folder is resident, but when I open it within Mail, and select Stationery, all templates in that folder simply have a frame around each on
-
Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?
-
Freeze from Song Start instead of Meas 0?
I recorded a concert into Logic, 38 channels, 24 bit, 44.1k. I'm breaking the individual songs out that I want to fix & mix. I'm editing out the regions of each song, then turning those regions into optimized audio files to make it more manageable. W