Labview crashes when selecting simulate signal

Each time labview 8.6 crashes after I selected the simulate signal function. I get an error message about ivanlyss.dll. The message is in Dutch and it's hard for me to translate but there seems to be a problem initializing the dll file.
I asked a collegue to send me a vi containing simulate signal and the same thing happened: labview crashed.

Hi Stefan,
I can't post a vi with the simalute signal since labview always crashes as soon as I select this function. I guess you are right and the best thing I can do is reinstall labview.
Ronald

Similar Messages

LabVIEW crashes when you run a VI that contains a mixed signal graph with a multi-plot cursor.

Hello, LV 8.2.1 notes indicates the following bug fix:
43SAIR2A Fixed an issue where LabVIEW crashes when you run a VI that contains a mixed signal graph with a multi-plot cursor.
I am running this version, and still have this behavior. Is there anything I may be missing, and/or certain circumstances that may still be causing this?
thanks in advance,
Darren

Darren:
I looked at the CAR ID that you mentioned and the issue has been resolved in LabVIEW 8.2.1. To verify something similar, I ran the attached VI and things worked just fine. Please feel free to send me the steps to follow to reproduce the issue you are running into in 8.2.1.
Regards,
Rudi N.
Attachments:
MixedGraphs.vi ‏15 KB

Photoshop CS6 crashes when selecting tools

Hi, I'm having the same problem as a few other members (Photoshop CS6 occasionally crashes when selecting tools) and have updated the driver on my HD5770 card to the latest version (8.961.0.0) as this is the recommended fix. Unfortunately this hasn't fixed the problem.
Here is the error report from the most recent crash.
This is very irritating as I inevitably lose some of my work when the application crashes.
What else do you suggest as a fix?
Steve

I installed 12.3 and restarted my computer. This did not solve the problem.
I've reinstalled Photoshop twice as well with no developments.
Then, I found this thread: http://forums.adobe.com/message/4289204
My card (Radeon X 1300 / X 1550) is not listed in the "Tested video cards for Photoshop CS6" section.
If I go to Edit->Preferences->Performance, and mouse-over the "Graphics Processor Settings" section, it says "Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry".
Is there any way around this?

LabView crash when intensity graph is in P6 of tab control

Any available fixes for LabView crash when intensity graph is put on page 6 of tab control and right-clicked??

Michael,
This has been fixed in LabVIEW 6.1.
Regards,
Cyril Bouton
Applications Engineer
National Instruments
Cyril Bouton
Active LabVIEW Developper

InDesign CC crashes when selecting text

Hello folks!
I have a serious issue here on my Windows 7 64bit notebook:
InDesign CC (and also CS6 before) keep crashing when selecting text.
I was still on CS6 when this failure appeared first. The strange thing is, it happens not always. When InDesign is opened new it will not crash instantly (most times). After some selecting random text a few times InDesign will crash with the well known "InDesign doesn't work anymore" message. There seems no pattern while selecting text (like special characters, certain fonts, whatever).
Tried to use CC – no luck! still crashing.
After some research in the forum I read, that this is very rare issue only occuring if there are more than 1 Windows accounts with both InDesign running. Indeed I made new account shortly before the first time this happened.
But sadly even after I completely wiped the second account, all my InDesigns (CS5, CS6, CC), all prefs, and also all fonts (as recommend in a thread with people havong trouble with just the type-tool itself) and all registry thingies the problem remains. Why?
Please help, it really kills the productivity.
Thanks in advance for everything!

Well, wonky extension seems like a good idea, but can be withdrawed because I haven't installed one.
The font issue is also equally probable. As already mentioned: The interesting aspect here is, that both InDesign CS6 and CC will crash. It happened the first time when Windows decided to blue screen and f*** up my account (I wasn't able to log in anymore, I had to made a new one). I once read in another thread that there is a problem occuring when having multiple Windows accounts with InDesign running. Re-installing InDesign didn't help. Font problem after all?
I have installed at the moment:
MainType
NexusFont
Typograf
and some small others, like: dp4 Font Viewer or FontViewOk

JVM crashes when selecting non-default printer in ReportViewer in NATIVE dialog.

On ReportViewer frame i have the print button active. If i click the print button (Native dialog) and select a printer other than default printer, the JVM crashes. Any idea how to fix it?
Thanks

I wanted to provide little history of what I am trying to achieve. Currently, I have the following code:
PrinterJob printJob = PrinterJob.getPrinterJob();
        if (printJob.printDialog()) {
            String printerName = printJob.getPrintService().getName();
            String printJobName = printJob.getJobName();
            PrintReportOptions printOptions = redirectPrinter(printerName, printJobName);
            sendReportOutputAndClose(reportClientDoc, printOptions);
I want to capture the number of copies user selects from the dialog. When I do printJob.getCopies(), it always returns 1. Not sure how to get that # of copies user selected. I also wanted to the dialog to be in Native mode because I don't want to give access to modify Margins and other page properties which are part of COMMON dialog mode. If I create the dialog printJobAttribute.setDialog(JobAttributes.DialogType.NATIVE); then VM crashes when selecting a non-default printer but I am able to get the number of copies. The key is I need to use NATIVE dialog and get the number of copies. One option is to display in COMMON dialog mode and then hide the "Page Setup" and "Appearance" tabs. Can this be done ? I am new to Java and Crystal so any suggestions would help.

Elements 13 crashes when selecting Print

Elements13 crashes when selecting Print from the File menu.
Rebuilding the Preferences file will bring the Print menus back, but only temporarily.
No error message, Windows advises the program must be shut down.
Win 7, 16GB RAM, Elements 6 on the same computer works fine.

Hi ,
You are going through File menu > Print or File menu > Order Prints .
Meanwhile go to Edit menu > Preferences >> Adobe partner services .
Click "Refresh Button"
Click "Reset Account"
and "Clear On-line Serves data" also.

JVM crashes when selecting a CLOB in a OracleCallableStatement

Hi all:
We have a lot of places in our codebase where we "batch" a no. of
selects using the OracleCallableStatement for better performance (i.e.
save multiple roundtrips to the db). Recently we upgraded to Oracle
8.1.7 and converted the LONG column in one of our tables to CLOB. Once
we did that, every place in the system where we use a "batch" select
(using refcursor) the JVM crashes (no stack trace, just the infamous Dr.
Watson on NT and SIGBUS SEGV on Solaris)
We are running wl510 sp10 , driver is weblogic oci (oci817_8).
Here is a sample code
cstmt = (OracleCallableStatement)con.prepareCall(
"BEGIN \n"
+ " OPEN ? FOR SELECT A, B, C FROM TAB1 where ..;\n"
+ " OPEN ? FOR SELECT X, Y, Z FROM TAB2 where ..;\n"
+ " END;");
cstmt.registerOutParameter(1, Types.OTHER);
cstmt.registerOutParameter(2, Types.OTHER);
cstmt.execute();
rs = cstmt.getResultSet(1);
Is there an update or patch for the driver which resolves this issue?
thanks much,
mohan

I wanted to provide little history of what I am trying to achieve. Currently, I have the following code:
PrinterJob printJob = PrinterJob.getPrinterJob();
        if (printJob.printDialog()) {
            String printerName = printJob.getPrintService().getName();
            String printJobName = printJob.getJobName();
            PrintReportOptions printOptions = redirectPrinter(printerName, printJobName);
            sendReportOutputAndClose(reportClientDoc, printOptions);
I want to capture the number of copies user selects from the dialog. When I do printJob.getCopies(), it always returns 1. Not sure how to get that # of copies user selected. I also wanted to the dialog to be in Native mode because I don't want to give access to modify Margins and other page properties which are part of COMMON dialog mode. If I create the dialog printJobAttribute.setDialog(JobAttributes.DialogType.NATIVE); then VM crashes when selecting a non-default printer but I am able to get the number of copies. The key is I need to use NATIVE dialog and get the number of copies. One option is to display in COMMON dialog mode and then hide the "Page Setup" and "Appearance" tabs. Can this be done ? I am new to Java and Crystal so any suggestions would help.

LabVIEW Crashes when Opening Project

Hey Guys,
I'm running into an interesting issue where LabVIEW crashes when opening a project. This is the second time I've run into this issue, on the same project. To get around it the first time I simply deleted and re-made my project, but since it's happened again, I need to figure out how to debug it. The symptom is that LabVIEW will crash when opening the project (sometimes I can see the "vi loading" screen) without any indication that crash has occured. It doesn't even launch the error reporter, the process just dies. Anyone know how I can go about debugging this?
Solved!
Go to Solution.

xkenneth86,
What version of LabVIEW? Have you ever had previous versions of LabVIEW on your computer? Can you attach a screenshot of the crash?
David H.
National Instruments

Labview crashes when creating large image files

I have a problem with Labview 6.0.2( I've tested evaluation version 7.0 too).
I'm constructing a very large image, for example: 4500x4500 pixels. Labview crashes when converting the pixture to a pixmap. The image is fully constructed on my screen (in a picture control), but when converting it to a pixmap (for saving the image in a known format (bmp, jpg, tiff)), Labview crashes.
I did some testing and when the number of pixels exceeded the limit of 2^24(16777216), the file 'image.cpp' crashes on line 1570. The vi to convert it to a pixmap is: P'icture to pixmap.vi'
Does someone know a workaround for this problem? Or is there a fix for it?
Thank you!

I've tested the 6i version of my VI in Labview 7.0 evalutation version. It raised an error but not the same error:
d:\lvworm\src\lvsource\compatexport.cpp(37) : DAbort: Called a routine not in the compatibility LVRT table
$Id: //labview/branches/Wormhole/dev/lvsource/compatexport.cpp#11 $
0x004BD4CB - LabVIEW_Eval + 0
0x0EB710D9 - lvs248 + 0
0x094C87A0 - + 0
So i replaced the picture VI's with the 7.0 evalutation version VI's, and it worked. It is now possible for me to construct very large image files!
I see no attached VI to test. But i guess it is also solved in Labview 7.0
I used this file to convert the picture to image data:
C:\Program Files\National Instruments\LabVIEW 7.0 Evaluation\vi.lib
\picture\pictutil.llb\Picture to Pixmap.vi
And this file to convert image data to bmp:
C:\Program Files\National Instruments\LabVIEW 7.0 Evaluation\vi.lib\picture\bmp.llb\Write BMP File.vi
I guess i have to write a workaround for this problem:
divide the picture in blocks of 4096 x 4096 and then merge the image data arrays of the bloks together.

LabVIEW crashes when I save changes to a particular VI.

LabVIEW crashes when it tries to compile a particular VI. I have managed to get it to work a couple of times by changing a few things and making some subVIs, but the problem keeps returning.
Is there some way to fix this or clean the VI of whatever corruption keeps occurring?
Thank you,
David R. Asher

I can think of address/hardware conflicts or something that LabVIEW cannot provide an error message. I would go with hardware/address conflicts.
Try renaming the file and executing it stand-alone. also try making it as a subvi and run the toplevel code.
Kudos always welcome for helpful posts

Why does LabView crash when unloading my DLL (reentrant calls)?

I have written a DLL in Borland Delphi using multiple threads that exports several functions (stdcall). I am using LabVIEW 6i on a WinXP machine. All functions in the DLL work as expected and return correct values. Everything works fine if I set all Call Library Function Nodes to 'UI-Thread', but as soon as I set one Function Node to 'Reentrant', LabView crashes when I close the VI after it has been executed. I assume the error is caused by the DLL unloading mechanism of LabView. Other C++/Delphi programs using the DLL reentrantly work fine, this only occurs in LabView. In which thread does LabView call FreeLibrary/DLL_PROCESS_DETACH? Has anyone experienced similar problems?

I have never run into this situation myself, but I do know that calling a multi-threaded DLL or CIN from LabVIEW does depend upon the following criteria:
If your CIN/DLL doesn't have any global data storage (global variables, files on disk, etc.), AND it doesn't access any hardware (register-level programming) AND it doesn't call any functions/DLLs/Drivers that are thread-unsafe.
OR
Your CIN/DLL protects (with semaphores or mutex's) access to those global resources.
OR
Your DLL is only called from one, non-reentrant VI
OR
Your CIN is only called from one, non-reentrant VI AND you don't access any global resources from CINInit, CINAbort, CINDispose, etc. procedures.
Hopefully this information can help you out in some way.
J.R. Allen

Labview crashes when using NX client

I can use Labview from the Linux console, but when using Nomachine NX to connect, I get the following error & crash when trying to launch Labview:
LabVIEW caught fatal signal
12.0 - Received SEGSEGV
Reason: address not mapped to object
Attempt to reference address: 0x0x72657375
No extra hardware is attached.
Platform: RedHat Linux 5.9 64bit
Product: Labview base package

Hello,
Related with your issue,I have found the following KB that talks about it:
http://digital.ni.com/public.nsf/allkb/A2D53C8E0D88380B86256EBD005B31D2

LabView crashes when writting file

Hello,
I have a big problem with LabView. In my Vi I capture 6 waveforms from a
DAQ Card with a SCC Module. When combining the 6 signals to an array and
write them to an file there is no problem but there is also no time
information. When merging the 6 signals and trying to write this to a
file, Lab View crashes without any error code or something. Perhaps
anybody knows a solution for this problem.
Thanks
Achim Kanert

Hello,
LabView crashes without any ErrorCode. A Popupwindows appears that says
LabView.exe occured an error. And then the LabView process is killed
automatically.
Because of other problems with the same machine I decided to reinstall
the hole system new (OS and LabView). So i hope it will be function
after this.
Otherwise I will try to send you a part of the vi, which causes the
error. I only know that it dependce on the integrated Vi to write
LabView Measerument Files, because when I take it out the System runs.
Thank you for your answer and I will tell you if the reinstall of the
system has solved the problems.
Achim Kanert

Why does LabView crash when I run it in parallel with a temp/ RH logging probe?

I am running LabView 6.1 on windows 95. Up till now I have had no problems. However, we recently acquired a Temperature / Humidity probe which plugs into the Com1 port of the computer and logs the data using it's own software. Since then, when the two programs are used together, eventually LabView crashes with the following error message: Failure, 'image.cpp, line 5793.
Can you tell me why this occurs and what the solution is?

Taking a shot at this. It could be because the two programs are trying to access the same type of logging program(excel??). Only one link can be active at a time or they crash. Try running it without saving the data and see if it crashes.

Labview crashes when selecting simulate signal

Similar Messages

Maybe you are looking for