LabVIEW Developer/Programmer I

FreedomCommunication Technologies designs and manufactures the world's only fully portable communication system analyzer. Visit us at www.freedomcte.com
We are looking for a LabVIEW developer with a minimum of 2 years experience. See more details in the job description attached.
Attachments:
FCT-LabVIEWProgrammerI.docx ‏40 KB

I have 3.5 years experience in LabVIEW developing. For Further details, you can refer my resume.
Thank You
SIBIN K MATHEW
+919844901717
Attachments:
SIBIN_K_MATHEW_resume .doc ‏131 KB

Similar Messages

DeTect, Inc., Longmont, CO. LabVIEW / C programmer position

Hello,
Below and attached is a open job position for our Longmont, Colorado office.
Regards,
Scott
LabVIEW® and C Programmer for Radar Applications
DeTect, Inc. is a provider of radar systems for meteorological applications and bird detection. The Meteorological Systems Division in Longmont, Colorado designs and manufactures radar wind profiling systems for use throughout the world. The Meteorological Systems Division has an opening for a full-time, in-house LabVIEW and C programmer to maintain and improve current code, and develop new code for instrument control, data acquisition, signal processing, database management, and remote control and display.
General Description
Program using LabVIEW and C to maintain (debug, modify) code for radar wind profilers
Use software design principals, software configuration management practices, software documentation, and signal processing knowledge to design and develop new code for radar wind profiler products
Work independently and with project team members to maintain and develop radar wind profiler software and related documentation
Confer with technical specialists and engineers to identify, develop, prototype, document, and deploy operational software for radar systems and components
Collaborate with technical specialists and engineers using RF/microwave and other electronics test equipment to integrate and test application software with hardware
Opportunity for advancement and upward career mobility
Required Experience
5+ years LabVIEW programming in practical applications
3+ years C programming in practical applications
Interfacing LabVIEW with instrumentation
Practical applications in manufacturing environment
Use of source code control
Database use and management
Software documentation
Formal testing of application software
Hardware interfacing with software
Signal processing fundamentals or direct experience
GUI development
Required Skills
Ability to understand and analyze complex software systems such as that used for real-time control of instrumentation like a radar system
Familiarity with best practices in LabVIEW and C software development
Ability to design and create moderately complex LabVIEW and C applications
Understanding of state machines and advanced user interface techniques
Self-starter comfortable working in small entrepreneurial environment with diverse team of engineers, technicians, manufacturing experts, and scientists
Ability to work with Linux and Windows operating systems
Desired Experience and Skills
Familiarity with LabVIEW Realtime FPGA
Experience in meteorology
Experience with radar systems
Experience with Microsoft Office, SVN
Ability to travel domestically and internationally
Certified LabVIEW Developer
Education
B.S. in Electrical Engineering and/or Computer Science (or related discipline) preferred.
Location:                                Longmont, Colorado
Employee Type:                      Full-time, but contract may be acceptable
Relocation Covered:             Negotiable
Contact:                                 [email protected]    (no calls please)
Website:                                www.detect-inc.com
File: 2012-08_LabVIEW-C_programmer_ad_v06.docx
Attachments:
2012-12_LabVIEW-C_programmer_ad_v06.pdf ‏131 KB

Dear Mr.Scott
I am a Master’s graduate in Electrical Engineering and I am glad to inform you that I posses 8+ years of constant exposure to LabVIEW and TestStand and I am Certified LabVIEW Associate Developer (CLAD). I am writing to see if this position is still available. I am working on H1B and I would like to know, if the H1B candidate will be considered for this position. Thanking you,

LabVIEW Developer + Software/Mechanical Engineer

Hello,
I am a LabVIEW developer with 3 plus years of experience in developing software applications for data acquisition, instrument control, motion control and image acquisition. I have a ME in Mechanical Engineering(control systems) from Texas A&M University. I am a Certified LabVIEW Associate Developer and currently working towards CLD status. I am located in TX and looking for fulltime opportunties as a Software Engineer/LV Engineer/Test Engiener. Willing to relocate, if the job is challenging and the offer is right.In addition to LV programming skills, I am experienced in J2EE,C++, object oriented methodology, UML and Visual Basic. If you are interested in my profile, send me an email and I will reply back with a full resume.Message Edited by marooner on 04-15-2005 01:30 PM

Adecco Technical is the leading provider of contract personnel and related staffing services. As a division of Adecco, the world's largest staffing company, ($13 Billion in sales), Adecco Technical has more than 100 offices in the U.S. alone.
Job Title: Labview Programmer
Labview Programmer with experience in motion control and high speed data acquisition.
RESPONSIBILITIES
The work incorporates the design and programming of specialty software for the motion control of high speed linear motors for the positioning and scanning of inline production parts.
Other projects include controls for process equipment.
This position requires a person who is well organized and can self manage a project from start to completion.
High degree of detail and the desire for perfection in the final product.
Perseverance to complete, detail, document and deploy the software.
REQUIREMENTS
A four year degree in Engineering is preferred.
Five years experience in Labview with at least three years in associating Labview in manufacturing automation and control.
The drive to accomplish projects and the need to get it right.
Thanks!
Elise Reisinger
Sr. Technical Recruiter
Adecco Technical
6081 E 82nd St., Suite 403
Indianapolis, IN 46250
317-842-2870
800-346-1203
[email protected]

LabVIEW Software Programmer and Project Lead in Overland Park, KS

JET Engineering Inc. is a System Integrator for test measurement and control. Corporate office located in Cedar Rapids, IA with branches in KS, MO, NE. Looking to expand into the Overland Park, KS area. ISO 9001:2008 certified.
Job Summary:
Customer on-site LabVIEW programmer on various projects. Responsible for assembling project requirements, accepting assigned responsibilities, working with other JET team members, and maintaining schedule to ensure timely completion of project. Must manage project scope, cost, schedule, and risk to achieve project objectives. Effectively coordinate and manage activities with other JET and customer team members. Track and communicate status of projects.
Job Responsibilities:
Designing and implementing LabVIEW solutions for customers with guidance from JET LabVIEW Architects
Understanding of National Instruments (NI) hardware capabilities integrate them into customer solutions
Troubleshooting hardware, wiring, and interfaces
Planning and Executing comprehensive software validation tests
Understanding and/or discovering how software, hardware and customer systems interact
Receiving and following general instructions on routine work, detailed instructions on new projects or assignments; work will be reviewed for soundness of judgment and overall adequacy and accuracy.
Building productive working relationships internally and externally.
Frequent internal company and external status reporting.
Developing solutions to a variety of problems of moderate scope and complexity.
Referring to policies and practices for guidance.
Working on problems of moderate scope where an analysis of situations or data requires a review of a variety of factors.
Exercising judgment within defined procedures and practices to determine appropriate action.
Contributing to the completion of organizational projects and goals.
Frequent use of general / technical knowledge and industry/functional practices, techniques, and standards.
General application of sound engineering process concepts and principles.
Developing professional expertise.
Job Skills:
Certified LabVIEW Developer level programing skills
Working knowledge of most NI hardware platforms
Prefer experience with NI TestStand
Prefer experience with NI VeriStand
Prefer experience with LabVIEW classes and object oriented programming
Job Attributes:
Analysis – understands elementary problem- solving techniques.
Cooperation – understands the value of cooperating with co-workers.
Coordinating – understands how to disseminate internal information.
Innovation – recognizes the benefits of change and experimentation.
Judgment –base decisions on factual information and sound logic.
Relationships –compassionate and empathetic when dealing with the problems of others.
Minimum Requirements:
Bachelor’s degree in appropriate discipline, or in the absence of a bachelor’s degree, six years of related experience, or NI CLD certification with demonstrated project experience.
Compensations:
Depends on Experience Level

Bill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim

LabView Software Programmer Job Opening - Seattle

LabView Software Programmer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an opening for Software Programmer. Seattle Safety designs, manufactures, and installs advanced crash test sled systems that are used in automotive and aeronautical industries. The duties of the Software Programmer include:
Work with current team members with varying levels of LabView to restructure existing crash test software and to do so in such a manner as to ensure each are able understand and work with code.
Supports all aspects of software application design, development, testing, deployment, and support.
Analyze the current and future needs of the software in order to properly select the type of architecture and structure best suited for the new application.
Perform software testing at a unit and integration level to ensure expected behavior.
Comments code clearly and consistently throughout the development process.
Prepare and maintain software flowcharts, layouts, and diagrams as needed to demonstrate solutions to outside staff.
Troubleshoot and repair any functional software bugs that may arise.
Investigate opportunities for system improvement through new software approaches.
Furthermore, the ideal candidate would possess the following skills:
Expert knowledge of LabVIEW.
Passing understanding of industrial controls.
Familiarity with a minimum one low-level programming language (C, C#, VB, Ladder, etc)
Familiarity with data acquisition concepts and hardware.
Discipline and organization with respect to software maintenance and version management. Experience with source configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated feedback control systems.
Experience with LabVIEW RTOS and PC Real Time Computers
BSCS, BSEE, or BSCmpE are preferred but not required depending on experience.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Porsche ServoSled facility near Stutgart Germany

Job is open again, see updated description here.
Please note at this time we are NOT accepting applications from outside the US.

Seeking Labview Developer in Nothern Illinois

LabVIEW Developer
Company: Tecnova
Description
Tecnova is a National Instruments Alliance Member with a growing LabVIEW Department.
Come join our expert team!
We are looking for a self motivated LabVIEW Developer who will own their projects, complete tasks on schedule and on budget while building a relationship with the customer.
Must have broad experience in the following areas:
* Program and document robust LabVIEW applications which include user Interface, database, test sequencing, instrument communication, data acquisition and PID control
* Design and execute software test plans
* Prepare end user documentation and help file content
* Develop automated test, data acquisition, and control systems
* Contribute to multiple projects, and help develop pushing-the-envelope technology
* National Instruments hardware (PXI, cRIO, Field Point, etc.) experience desired
* Contribute to system design and specifications
* Involves extensive customer contact and moderate travel within Chicagoland area
* Must be intelligent, creative, and self-motivated
Requirements
* BS in Computer Sciences, Physical Sciences or Engineering
* 3 years of practical experience in LabVIEW programming
* High comfort level with scientific and technical terminology and the willingness to learn
* Test and measurement experience
* Must be self directed and able to meet objectives as directed
* The ability to effectively work independently in a fast paced environment, with experience adapting to changing requirements and to rapidly absorb new concepts and apply them effectively is essential.
* You must also have good communications skills. Presentation and communication skills, as well as being able to work in a team, are crucial.
Preference will be given to applicants with the following skills:
* Certified LabVIEW Associate Developer (or better)
* National Instruments hardware (PXI, cRIO, Field Point, etc.)
* Communication protocol (RS-232, GPIB, TCP I/P, USB, Bluetooth, etc.)
* Motion control
* Vision control
* PLC (Allen-Bradley, Honeywell, Modicon, Siemens, etc.)
* Schematic capture (OrCAD, AutoCAD, etc.)
* Database connectivity
* Application and instrument driver layers
* Experience with National Instruments PC based DAQ devices
* Experience with various sensors and transducer signal conditioning (microphones, accelerometers, temperature sensors, etc.)
* Actively involved in the LabVIEW community
Additional Requirements:
* Local Candidates Only
* Location: Gurnee, Illinois (Northern Chicago Suburb)
* No 3rd party resumes accepted. Principals only, no agencies or contractors
* Must be a Citizen or Permanent US resident, authorized to work in this country for any employer
* Because of the immediacy of this position, we are unable to sponsor people at this time.
About Tecnova:
Tecnova is a leading electronic product development and engineering firm that provides custom electronic hardware, mechanical, and software solutions. We offer exciting professional challenges, variety, and plenty of opportunity to roll up your sleeves and make a difference. Located far north of Chicago in Gurnee, Illinois, we offer excellent salary/benefit package with 401K. We are looking for innovative, creative, results-oriented people that desire a wide variety of projects in a challenging, fast-paced environment.
For more information about Tecnova see our website at www.tecnova.com.
Contacting Tecnova:
For immediate consideration, please send resumes to [email protected]

I am writing to put myself forward. As you can see from my CV, I have many skills pertinent to this role gained for less than 1 year as a successful Research Assistant. I am having very good knowledge in mathematics.I wish to move into this sector because it is a fast-moving environment and I am also interested in new technology. The skills that I have and believe to be highly relevant to this job and your company which include: Analytical thinking, Self motivated, Fast learner and staying calm under pressure. Additionally, I have undertaken CLAD course and qualified with 80% and believe my unique blend of skills can offer a great deal.I am confident that I possess the attributes you’re looking for and that my experiences gained in Research Assistant would provide invaluable insight and capability to your organization. I would welcome the opportunity to discuss my application in person.
Attachments:
Resume.doc ‏44 KB

LabVIEW Developer Opportunity in San Jose

CTG has been asked to assist our client in staffing a LabVIEW Developer opportunity. This is a 200 hour, short term project on-site in San Jose, CA. This quick job will entail very little new development and will consist primarily of enhancements and modifications to existing code. If you are interested, please forward a copy of your resume (.doc or .txt) to the e-mail address listed below. I will contact you directly upon receipt of that information.
Please note that we can only consider W-2 applicants at this time; no third party, independent or corp-to-corp vendors, please.
Thanks for your consideration!
Regards,
Jessica Owens, Sr. Recruiter
ctg Computer Task Group, Inc
phone: 800-992-5350
[email protected]
www.ctg.com
Backed by 39 years' experience, CTG provides IT staffing, application management, and consulting solutions to help Global 2000 clients focus on their core businesses and use IT as a competitive advantage to excel in their markets. CTG combines in-depth understanding of our clients' businesses with a full range of integrated services, proprietary service methodologies, and a proven track record of delivering solutions that work. More information about CTG is available on the Web at http://www.ctg.com.

Thank you for your interest in CTG; this position is now closed. If you would like to forward a copy of your resume, it will be entered into our database and you will be contacted as appropriate opportunities become available. In the meantime, thanks again and have a great day!
Regards,
Jessica Owens, Sr. Recruiter
ctg Computer Task Group, Inc
phone: 800-992-5350
[email protected]
www.ctg.com
Backed by 39 years' experience, CTG provides IT staffing, application management, and consulting solutions to help Global 2000 clients focus on their core businesses and use IT as a competitive advantage to excel in their markets. CTG combines in-depth understanding of our clients' businesses with a full range of integrated services, proprietary service methodologies, and a proven track record of delivering solutions that work. More information about CTG is available on the Web at http://www.ctg.com.

Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
ErrorCode: -17600,
Failed to load a required step's associated module.
LabVIEW Run-Time Engine version 9.0.1f3.
When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
My TestStand Engine Version is 2012 f1 (5.0.0.262).
I'd appreciate any help on this issue.
Roman

Hi Roman,
There are a couple of things you can try:
1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
Check if the simple VI is loadable and runs without errors in TestStand.
If the step generates the same error, you should try a re-install of the LabVIEW development system.
If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
    Right-click "Build Specifications" and choose "New->Application(EXE)".
    In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
    Save the properties.
    Right-click on the newly created build specification and choose Build.
Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
Regards,
TRJ

How do I determine if a VI is running in the runtime engine or LabView Development Environment?

Is there a function or VI that I can call that will tell me if the program is running in the LabVIEW Runtime Engine or if it is running in the LabVIEW developement Environment? I am using LabView 8.5.
I have a menu item, File/Exit, and I would like to call the Exit LabVIEW vi if running in the runtime engine when that item is selected. However, in development, I don't want to shut down LabVIEW when I select that menu item.
Maybe there is a more appropriate way to exit the program. However, I am looking for something elegant. I'm sure I could find some other way to accomplish the same thing, but I'm looking for a clean way to do it.
Thanks

Here is a small VI with this exact function.
Attachments:
Is EXE.vi ‏9 KB

Labview developer-search for remote work

I have 3 year experience as Labview developer. I have good skils in controling devices using different interfaces and automated tests.
I'm searching for some small projects which can be resolved using remote work. If necessary I can travel several time (in Europe).
Also I can aproach any specific project if initial data & rquirement are very clear defined and is no time presure.
If interresed e-mail to [email protected] .
Thank you!

Hi there,
Sorry but I have already taken on a new contract. If you send me your email address I can pass your request to some people who could help you.
Best regards
Neil
nrp
CLA

Hi, I upgraded my iphone 4 to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tels that this device is not registered as part of the iphone developer programme. How could I fix this problem? Please..?

Hi, I upgraded my iphone 4 (4.3.3) to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tells that "this device is not registered as part of the iphone developer programme." How could I fix this problem? Please help me...,

I had a similar occurrence with my just activated iPhone 4.
I had been using the phone for three days when an odd occurrence with voice mail caused me to call tech support. After some discussion they decided to push the activation to my phone (even though I had been using it for three days). When I went to power it back up again I repeatedly got the "no service" notification. I got tech support on a land line and we tried hard reboots and so on. No joy. They told me to take it in to the point of sale and either the SIM card or the phone needed (or both) needed replacing.
I tried one last hard reboot after dinner and the phone came up with service, but I took it in to the point of sale in the morning and they swapped the SIM card out and I went to a Genius Bar appointment to get the phone checked out. It is supposedly OK, but I am still having some problems when syncing it so I will have to visit the Genius Bar again tomorrow about that. At least I have not experienced the "no service" problem in the roughly 24 hours since the SIM card was replaced. (Fingers crossed)

Technical competition team needs Labview Developer

The KC Space Pirates are a team in NASAs Beamed power competition.
We are looking into using Labview to automate aiming a high power laser.
I am looking for an experienced Labview developer to help with the project.
There is no pay if we don't win. If we do win the pay will be generous.
So if you are something of a gambler and want some aerospace experience we should talk.
Brian

Mr. Turner,
You have my curiosity. I used to work for United Space Alliance on KSC. My wife and I still live near Cocoa, so I'm not far away. She still works on Cape Canaveral. I have had a good bit of experience with version 7.1 and I have the CLAD certification. I was very close to being ready to test for the CLD certification, but unfortunately, I changed jobs to where I am now and I don't use LabVIEW at work any more. I'm still going to study for and get the CLD since I really like LabVIEW and have a few ideas for a few of my own projects. I have a couple NI PCI DAQ cards I can play around with at home.
Anyway, I'm very curious about your project and am willing to consider joining you.
Thanks,
Brad

Looking for a LabVIEW developer / Test Engineer in Atlanta

Averna at a glance
Averna delivers industry-leading test solutions and services for communications and electronics device makers worldwide, accelerating product development, quality and innovation:
Dynamic: The Averna team thrives on challenges and change, consistently making the prestigious Deloitte Technology Fast 50 list and winning Best in Test and other awards.
Young: The majority of our 300 employees are under 35 years old, and our high-achieving CEO was named to Canada’s Top 40 Under 40.
International: We have offices in Canada, the United States, Mexico, Japan and Hungary, with headquarters in Montreal.
Innovative: We were recently recognized as a Canadian Innovation Leader by the National Research Council Canada (NRC).
Instrumental: Our technology, expertise and drive help our global customers produce market-leading high-tech products in the telecom, transportation, electronics and multimedia sectors.
The challenge of the LabVIEW developer / Test Engineer
As part of the Engineering team, you will be involved in the development and integration of various software programs for validation systems. These systems are renowned for providing fast data throughput and extreme data integrity, while accelerating design cycles and reducing prototyping costs. The Engineering team develops a range of custom data acquisition systems to help our customers obtain accurate measurements and results.
Requirements:
Bachelors degree or college diploma in electrical engineering, software engineering or physics, Masters degree (asset);
3 to 5 years experience in software development with LabVIEW (preferably CLD);
Knowledge of NI TestStand is an asset (Preferably CTD);
Knowledge of video or RF test engineering
Knowledge of FPGA design (either VHDL or LabVIEW FPGA)
Available to travel regularly;
Professionalism, strong communication skills and interpersonal skills;
Team-player, autonomous, self-starter;
Please send your resume to [email protected] and mention the title of the position.

Is this position still opened?

LabVIEW Developer, Full Time, ISRAEL

QualiSystems (www.qualisystems.com) is looking for great people who love LabVIEW. We take pride in our code and by taking LabVIEW to its limits we have a need for only the best in the field. Here are the details:
LabVIEW Developer - Position #4038
Requirements:
4 years (or more) of experience in LabVIEW
Advantages:
Experience in Hardware QA.
Experience in the following fields: Communication, RF, Power, Digital
Experience with C/C++/C#
Experience with Scripting Languages
Experience with Communication Protocols
Experience with Databases
LabVIEW certification
A little bit about the company:
QualiSystems is a pioneer in the field of Functional Test Automation (FTA).
The FTA world is evolving from a collection of various tools to an enterprise quality management platform. QualiSystems' mission is to be the leading software company in the new FTA era.
QualiSystems' TestShell™ unique solutions consist of a suite of integrated applications that enables our customers to test, manage and optimize quality throughout the entire product lifecycle. These solutions enable the creation of complex high quality products, shorten time-to-market and significantly reduce costs. TestShell applications turn the functional testing process into a complete quality optimization solution.
QualiSystems' TestShell is used by leaders in industries ranging from telecommunications, cellular, aerospace and defense, consumer electronics, medical devices and semiconductors.
The company headquarters and expert R&D team are located in Israel. QualiSystems growing global presence includes representatives in Northern and Central Europe and North America.
Please visit our website (www.qualisystems.com) for more information.
Please send your resumes to: careers (at) qualisystems (dot) com

Hello Amiram,
if the position is not yet filled, pm me at coldchemist(at)gmail.com.
Thanks.
... And here's where I keep assorted lengths of wires...

Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company

Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
This position is located at Lokhandwala, Andheri West, Mumbai.
Requirements:
Applicant must meet the following criteria:
2+ years of LabVIEW experience.
Should be from Engineering background.
Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
Knowledge of NI DAQ hardware boards.
Automated test, measurement, data acquisition, and/or control experience.
Good at documentation.
Knowledge of Software Development Cycle
Must be able to meet objectives as directed.
Ability to effectively work independently.
Ability to contribute and work in a team environment.
Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
Good communication skills.
CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
E-Mail: [email protected]
Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.

Kindly send me your resumes on [email protected]

LabVIEW Developer/Programmer I

Similar Messages

Maybe you are looking for