Labview developers at YODAVI India

Required Skills:
•Candidate should have 0-10 years of experience in LabVIEW. Should be familiar with various NI toolkits and add-on modules.
•Candidate should have implemented various protocols such as RS-232, GPIB, MODBUS, Ethernet, Device net using LabVIEW language.
•Should be familiar with functional test development experience using various NI hardware modules (PCI, PXI, DAQ, cDAQ etc)
•Must be able to work with onsite/online clients.
•Ability to work independently with our clients
•Should be good in debugging exciting code.
•Candidate should have good communication skills, presentation skills and interpersonal skills.
Niche Skills:
•Knowledge of Project Development Life Cycle
•Successfully completed various NI Certification exams (CLAD / CLD / CLA)
If you think you meet these requirements, please drop me an email with your resume,Current CTC, Expected CTC and Notice Period and contact information to:
[email protected]
Thanks,
YODAVI HR

bump.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Similar Messages

Job oppurunities for Labview developers in India

How is job oppurunities for Labview developers in India?

There are two job boards available. This forum is explicitely for help when programming Labview.
If you are posting (offering) a job, visit this forum: http://forums.ni.com/ni/board?board.id=JobPost
If you are looking for a job, then visit this forum: http://forums.ni.com/ni/board?board.id=JobSearch

Labview developers job

Iam m.tech computer science 2014 pass
I have 10 months experience in labview coding .
can i find a suitable job profile for me suggest me the companies i can apply for
email id : [email protected]

Hey,
I think you are on a wrong forum.Please apply here
forums.ni.com/t5/LabVIEW-Developers-Seeking/bd-p/JobSearch
Also there are lot more companies in india which works in Labview domain.
Please go to the list of NI Alliance Partners in India and apply separatly on there company websites
=========================================
Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
Mangesh D.
CLAD | Project Engineer
==
VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera....

I would like to attain sample Labview Developers exams.

I was hoping to download sample exams to study for the Labview Developers Exam. I also want to know if the preperation course offered by NI for the exam is worth pursuing.

There is not a sample test, but you can download a pdf of the Tasks and Objectives that might covered on the test here. Look for the "Certified LabVIEW Developer" heading, then click the Tasks and Objectives link. There is also other information available on that page.
I didn't take the prep course, but a co-worker did and he did pass the test after taking it.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

LabVIEW Developers for Permanent Positions at Gurgaon, INDIA

HI,
We are looking for a few Labview software developers that will work as part of the R&D team in developing software and integrating the hardware and automating, testing etc. An experience in Robotics, Machine Vision, and motion control, sensor networks, environmental control would be an advantage.This is a fulltime position. Certification with NI is a must. The job is based in Gurgaon, India. If interested, please feel free to get in touch at [email protected] or [email protected]
Kind Regards,
DebRonjon.

Hi,
I have 2 years experiance in Lab VIEW automation. I have send cv to factory automation mail id. I did'nt get any message reply.
Here i have attached my resume to your reference.Please check it. I am waiting for your reply.
Thanks
Siva
Attachments:
Sivaramkumar LabVIEW.doc ‏68 KB

Required LabVIEW Developers (Bangalore, India)

Profile: Labview Engineers
Location: Bangalore.
Desired Candidature
• B.E / B.Tech in Electronics / EEE / E&C / E& Instrumentation.
• 1-2 Years of experience in LabVIEW.
• CLAD, CLD or CLA from National Instruments preferred.
• Excellent written and verbal communication skills.
• Experience in programming language C/C++/VB is an added advantage.
There are 4 openings.
send your resume to [email protected]
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Well this opening is for "Captronic Systems Pvt. Ltd.", Bangalore.
and we're one of the 17 "Alliance Partner" of NI.
We have specialisation in "Industrial Automation, Automated Testing, Validation Testing, Data Loggers and Automated Test Equipment".
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

LabVIEW Position in Bangalore, India

We Are going through the second round of hiring to add to our existing team of LabVIEW Engineers who are based in Bangalore.
The Job Details are as follows:
Job Title: Systems Engineer (Test Software and Integration Group) or Senior Systems Engineer (Test Software and Integration Group)
Locations: Bangalore, India
Salary/Wage: Industry standard
Status: Full Time, Employee
Relevant Work Experience: 2 to 5+ Years
Career Level: Intermediate to Experienced (Non-Manager)
Education Level: Bachelor's Degree
Required
Proficiency in LabVIEW 8.X
Familiarity with NI TestStand
Familiarity with National Instruments Hardware interfacing (NI DAQ – IMAQ etc)
Experience in Design and Implementation of Test Software including integration
Experience in ATE usage and development
Requirements generation and review experience
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills In English
Desired
LabVIEW-based Object Orientated Programming
MS Project
UML
Experience executing verification and validation for projects
Experience generating and/or reviewing cost proposals
The Contact information is as follows:
Sri Ranjini
C V HR /FACILITY ASSISSTANT VI Engineering Solutions Pvt Ltd V A L U E I N T E G R I T Y
No. 16 , Curve Road, Tasker Town,
Bangalore - Ph: 080 - 41132277 / 76.
E-mail : - [email protected]: [email protected]
Website : - [email protected]
Note: If you have already been interviewd recently (in last 6 months) for a similar position at VIE-Bangalore office, please do not respond to this post.
Thanks.

Dear Sir/Madam,
I saw the opening for this job position in your website. I am highly interested in this project. I am perusing Master in Technology in electronics and communication (Optoelectronics and Optical Communication) from the University of Kerala, Thiruvanthapuram, India and currently doing a project “ Automation of laser cooling set up towards precision experiment with the help of labview” at Raman Research Institute, Bangalore, India (Jan – Nov 2009). In this project I used DAQ card and IMAQ. I have completed my B.Tech Degee in Electronics and communication in 2007,Cusat university, Kerala, India.
             I look forward to hear from you soon. I am attaching my resume with this cover letter..Thank you ahead of time for your kind attention.
                                                                                                                      With Regards,
                                                                                                                      Umadevi.P.C
                                                                                                                      [email protected]
Attachments:
NIJILA-4.doc ‏49 KB

Part Time, Contract Based, and Full Time Positions available for LabVIEW Developers

Mindready (www.mindready.com) is looking for flexible, hard working individuals to fill part time, contract based, and full-time/permanent jobs in LabVIEW development positions. We have immediate needs for contract labor in Dallas, TX; NY; Huntsville, AL and Austin, TX, as well as other locations. US Citizen and Security Clearance required on some projects. Mindready is a certified National Instruments Alliance Partner with facilities in Montreal, Austin, TX and (Radical Systems, Inc. – a mindready company) Huntsville, AL (www.radicalsystems.com).
The duties of the positions include:
• On and off-site LabVIEW development work. May involve TestStand, instrumentation such as PXI and stand alone instruments, DAQ, Motion, Vision, etc.)
• Willingness to travel for periods as short as 2-3 days, to as long as 6 months. (Ideal candidate would be local to any long assignment)
• Integrate into customer’s development team to design and modify new/existing LabVIEW applications.
The ideal candidate would possess the following skills & qualifications:
• Intermediate-to-advanced knowledge of LabVIEW (a pre-employment test is required)
• Broad technical knowledge is a plus, we serve a wide range of application areas
• Excellent writing, communication (English), time-management, and interpersonal skills.
• Ability to travel for on-site work at customer facilities for jobs as short as 1 week, possibly as long as 6 months.
• Discipline and organization with respect to software development and maintenance.
• Engineering, Technical or Computer Science degree or appropriate experience
• Certification is not required but would be beneficial
Pay is commensurate with skills and qualifications of the applicant. Compensation will include a competitive hourly rate.

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam

LabVIEW & Vision Position, Pune, India

VI Automation, Pune is looking for a LabVIEW (6+ months) and Vision (6+ months) programmer.
The right individual will be responsible for the following:
- Design and develop LabVIEW and Vision programs
- Adding to a library of reusable modules
- Be a diligent user and promoter of Source Code Control
- Assist troubleshooting HW/SW interaction
- Be an integral part of the team but work with minimal supervision.
The Job Details are as follows:
Job Title: Labview and Vision Programmer
Locations: Pune, India
Salary/Wage: Industry standard
Status: Full Time, Employee
Relevant Work Experience: 6+ Months
Career Level: Intermediate to Experienced (Non-Manager)
Education Level: Bachelor's Degree
Required
Proficiency in LabVIEW 8.X and above
Familiarity with NI Vision
Familiarity with National Instruments Hardware interfacing (NI DAQ – IMAQ etc)
Experience in Design and Implementation of Test Software including integration
Experience in ATE usage and development
Requirements generation and review experience
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills In English Desired
Experience executing verification and validation for projects
If interested please send your resume and contact information to:
[email protected]
www.viapl.com

Hi,
My name is Dinesh; I am a B.E Graduate in
Electronics and Communication working in Labview platform
      My current profile includes
overall 18 months experience in Labview+ MATLAB.
      I have 15 Months of
experience in Labview using various National Instruments Hardware such as SCXI,
DAQ cards & software such Labview 8.2/8.5&8.6, Measurement &
Automation Studio, NI Vision Assistant, Labview Report Generating Toolkit etc.
      Please go through my resume as in attached
file and kindly revert back if my profile matches with your requirements.
     Please contact me at [email protected] or 9941537378 for further details.
Thanks
Regards,
Dinesh
Mobile: 9941537378
Mail: [email protected]
Attachments:
Dinesh Resume.doc ‏74 KB

LabVIEW Openings in Bangalore, India

Captronic System Pvt. Ltd., a Select Alliance Partner of National Instruments, specializes in the design and development of custom automated test, control and acquisition systems for R&D, design validation and production testing.
Captronic Systems is looking Electrical/Electronics/Instrumentation Engineers with LabVIEW experience. In addition to excellent package, we also sponsor our employees for certifications from National Instruments.
Please visit the careers section of our website for more details and send your resumes to [email protected] or [email protected] .

Dear madam.
This is sivaramkumar from Bangalore....i have Completed B.E in Electronics & Instrumentation eng....and i have 1 year Experiance in Automation Projects..Now i am Working under Lab VIEW develobment Data Acquistion from NI cards..I am suite for your recruit..i have enclose my resume in this forum..you can reach me as soon as....
Attachments:
Sivaramkumar LabVIEW.doc ‏59 KB

LabVIEW Developers-0-1 Yrs Experience, VI automation, Pune

VI Automation Pvt. Ltd., a Alliance Partner of National Instruments, specializes in the design and development of custom automated test, control and acquisition systems for R&D, design validation and production testing.
VIAPL is looking Electrical/Electronics/Instrumentation Engineers with LabVIEW experience 0-1 Yrs. In addition to excellent package, we also sponsor our employees for certifications and training from National Instruments.
Please visit the careers section of our website www.viapl.com for more details and send your resumes to [email protected]

Hello,
I am Shubhlaxmi
Chandrikapure working in CC Engineer Private Limited,Pune.I have total
1 year and 7 months of experience in Labview.Knowledge of PC based
Data Aquisition,Rs232 Communication.I have done 3 projects.
Currently working On "ABSOLUTE BLOCK SYSTEM" Project which is design
for railway signals.Application describes how to change aspect of
signals with the help of excel sheet through Rs232 communication which
has 104 inputs and 600 outputs.The whole track is of 40fit with 6
stations.
Attachments:
Latest Resume.doc ‏79 KB

Want to form a oracle developers community in India

Dear friends...
I am doing my 3 rd year engineering in Madurai,Tamil nadu,INDIA. Many of my friends in and around my city studying in engineering colleges are unaware of what oracle is and its technologies are.I Thought of educating them and to create a awareness about ORACLE s latest technologies. I am working with oracle products for more than 5 years. i want to share my knowledge with these guys.I want the support of ORACLE to implement my vision. I have no idea of how to contact ORACLE for this specific purpose. Friends...show me a way so that i could help others...
Khalil Rehman Aziz .S
[email protected]

"to get discounts for Education, call Sales on 1800 425 4646 (toll free) or 080 2574 4646, SMS "SALES" to 54646 or email [email protected]"
In the USA the education discount on Macs is $100.

What type of component do Labview developers prefer? COM/ActiveX, C++ DLL, C DLL?

The last time I used Labview was about 5 years ago and I have not kept
up with the changes.
I assume Labview can use COM components, ActiveX (COM with a GUI), C
DLL's, and possibly C++ DLLs. Of these types, which do Labview users
prefer?
Background
I need to develop a component that can be used by both VB and Labview
users.

Ed,
LaBVIEW can use COM/ActiveX components, C dll's and C++ dll provided that the c++ dll has direct function calls(you can always use a wrapper dll to call functions inside a class)
As far as what labVIEW users prefer, this is kind of a difficult question to answer since it is mostly dependant on the users knowledge of each of those components.here are a few links that may interests you.
http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/5401be584fbaeece862567c2006d36c7?OpenDocument
http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/7f41004ee990d4da86256a9d0064d522?OpenDocument
http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/3a1f4b7cbc68b636862567cc004d5cca?OpenDocument
and more gener
ally
http://zone.ni.com/devzone/devzone.nsf/webcategories/4161F118BF99CCE686256AB7006A68EB?opendocument&node=DZ53001_US
Regards,
Cyril Bouton
Applications Engineer
National Instruments
Cyril Bouton
Active LabVIEW Developper

Common behaviors among LabVIEW Developers

Hello friends,
Well, I'm sorry if I should start this thread in another section, but I think this is a pertinent discussion about LabVIEW development practices.
Today I'm celebrating my first year working with LabVIEW. Before that, I had never heard about it (I think that's because I'm an IT Technician and I'm only 18).
Anyway, the point is: Am I the only one that freaks out because of the block diagram neatness?
I've just finished one medium project (5 VI's, VISA based) and I noticed that I've spent much more time working in details than in the whole architecture or code. I simply don't stand unecessary bended wires, lots of free spaces and everything that makes the code look a real mess.
Is this actually good or I'm wasting my time?
I'd like to post my VI here, but I'm not allowed to this. The fact is, my first medium project started from zero has a modularity index of about 4.5% and no warnings about Node Density (25%) or Diagram Size (1280x800, my current resolution). I know they aren't impressive numbers, but I'm satisfied with them.
I would like to know your opinion about how worthy is the neatness of the code and what aspects should I give more attention when "cleaning up" the whole diagram in my next project.
Thank you all
Regards
Mondoni

crossrulz wrote:
My block diagrams tend to very clean. My cleanup is typically done when I'm going back through my code as a personal code review. I have heard from the LabVIEW R&D guys that they just use the Diagram Cleanup tool (CRTL+U or the broom button in the block diagram tool bar). I know there's plenty of guys here that absolutely hate the Diagram Cleanup tool. I rarely like its results.
To help myself, I actualy made a quick drop plugin to do various clean up processes for me. That has save me a ton of time.
Yes, clean diagrams are important. But the important thing is the readability, not necessarily how clean the diagram actually is. If you can't read the code, it is next to worthless. And you would be surprised how much simple documentation can help in that.
That being said, a clean BD goes a long way towards readability. There actually can be too much of a good thing, though. I see some people who will make wires go behind sub-VIs just because they can't stand bent wires. Then it looks like the wires go into/out of the subVI, which makes troubleshooting orders of magnitude more difficult. Other times they hide code in stacked sequences to save space, when really they should be thinking about sub-VIs. Sometimes they will use local variables with impunity because it "cleans up those messy wires." (I paraphrase that from an actual post here.)
I think a neat BD in itself means that you pay attention to detail, and that's a good habit to have if you're a developer.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Filemaker pro developers in Chennai india

We run a hospital in chennai supported by filemaker pro. Are there any developers in Chennai to support this. Thanks
Macbook1.1 Mac OS X (10.4.6) CPU Type:Intel Core Duo

In fact, Filemaker isn't even made by Apple.
The Filemaker support page can be found here:
http://www.filemaker.com/support/index.html?source=home

Labview developers at YODAVI India

Similar Messages

Maybe you are looking for