Labview Discussion Forum Promotions

Hey everybody! Just trying to figure out how many replies I need before I can level up from Proven Member to Proven Regular? How many experience points do I get for one reply or for one new thread? Also, once I finally level up does this give me any new powers or abilities? For instance, when I do finally level up do I get the special ability to be able to write a .VI in a single try without errors? 'Cause that'd be kinda cool...
Trying to figure out the quickest way to labview stardom,
Jonathan

You might want to look at the two forums, Breakpoint, and Feedback on NI Forums, under the Special Interest Boards section. There have been a number of discussions about the rating system and the link to a FAQ (which I don't remember at the time). Roughly it is 50 replies to reach the first transition, 2000 to become an "Enthusiast", but I don't remember the other levels at the moment. You do get community accolades when you break 1000, and we have one very helpful and prolific submitter that is now 5000+! (I'll let you determine who that is).
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Similar Messages

Can I see Labview discussion Forums in Outlook Express

Hi all,
I want to see the Discussion Forum of Labview through Outlook Express.I have Windows XP as OS.
plz help
Thanks in advance
--sattu

Procedures vary depending on OE version, but here are the general instructions. If your computer is not too customized, you can go there directly, just click the following link
-----newsgroups.ni.com -----.
Manual instructions:
Open Outlook Express and go to "tools...accounts".
Click [Add...] --> News...
and finish the wizard with relevenat entries:
Display Name: Your real name or an alias.
e-mail address: your e-mail address (or a fake, ending in .invalid if you want to keep it private or are worried it gets harvested).
News server: newsgroups.ni.com
Finish the wizard.
Now select newsgroups.ni.com and press "Newsgroups..." and subscribe to whatever you desire. You can also
"go to" any newsgroups without subscribing.
LabVIEW Champion . Do more with less code and in less time .

Welcome to the LabVIEW Communications Discussion Forum!

All,
Welcome to the discussion forum for LabVIEW Communications System Design Suite! This is an open forum for users of LabVIEW Communications to share their product related questions and knowledge with each other. Like our other NI discussion forums, NI engineers will be active in helping to resolve questions and provide feedback.
For getting started materials, tutorials and example code, try visiting the SDR Community.
Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

You are still posting in the wrong forum and in an unrelated thread. This forum here is about software defined radio (SDR).
LabVIEW Champion . Do more with less code and in less time .

Multi-Process Engine Discussion Forums

This is a discussion forum for the Multi-Process Engine (MPE) Reference Component and A Multi-Process Engine in LabVIEW.
Note: Both articles should be live by 1/13/09
Brian K.

Hello Gerardo,
I was not aware that you work for NI. I have some important questions for you:
Assume we use your trick and wrap a Timed Sequence around the outer Loops of State Diagram Toolkit generated code.
Now the user code runs at a Priority above High Priority, but below Time Critical Priority. Right?
Questions:
1) Which, if any, System (RTOS) processes will Preempt User Code running at this Priority Level ?
(Probably the Memory Manager / Garbage Collector, but we are not doing any operations which should make GC kick in)
2) If the User Code still can be preempted by System Processes, what is timewise the upper bound (apart from GC) of these processes?
i) The System Processes may run for a long time, so the Time Slice of 10 ms will be the upper bound ?
ii) The time is much shorter, shorter than X ms, where X is ?
Please, knowing this will give us more peace of mind !
And, if you may, which processes may Preempt High Priority?
We have run our endurance test now for 39 hours and it has performed 150.000 Relay Operations as described in the White Paper. It has met the expected Min / Max response time perfectly every time.
It has 24 processes running at High Priority and one Communication Process using Shared variables running at Normal Priority. So the system seems to work, but we must know before deploying the system at the customer site!
Geir Ove

Welcome to the NI VeriStand Discussion Forum

Welcome to the National Instruments NI VeriStand discussion forum. This group is intended to provide a discussion forum for developers and engineers
using National Instruments NI VeriStand. Through the ni.com support site, this forum and other online tools, you have the opportunity to obtain
information and examples about NI VeriStand and to ask question to help you in creating Real-Time test applications using NI VeriStand.
In addition to answering current questions it provides a mechanism for recording this information and allowing new developers to browse the history
of the group for information that has already been discussed.
While this is not a direct support channel administrated by the NI Applications Engineering group, it gives you the tools to help and support each other (with some assistance from NI Applications Engineers if needed). You may also use this forum to provide feedback and information to NI about the needs for support and for new features.
Regards,
Angela M
Product Support Engineer

Hello Ravens Fan,
I would definitely encourage you and others interested to check out ni.com/veristand which has some more detailed explanation, as this software does many things that are difficult to cover in a short post.
NI VeriStand is a software which helps users to configure and run a Real-Time test application. This includes Hardware-in-the-Loop testing and model based control in a more configuration based environment than if you were to program this directly, in LabVIEW for instance. It has many built in features to control timing, data communication, setup your Real-Time target configuration and more. It is a standalone application, but has many ways to be customized to extend the software capabilities.
The Getting Started with NI VeriStand page has some demonstration videos which are a great way to get some more insight into this product.
I hope this helps, feel free to try it out as that really is the best way to better understand the software.
Regards,
Angela M

Thanks NI/Discussion Forum

I just want to start a post where anyone can say thanks to all the people who are part of NI and this discussion board.
I sometimes asked elementary questions to some really savvy experts, but patience and a committement to helping me out was the only type of response I received.
So thank you very much to all the people in this discussion forum, employees and common folks, who make NI and LabVIEW seem approachable to naive users.
Thanks a bunch.

Thank you! Every new post provides help to others who are part of the discussion forums. We appreciate the knowledge passed on by users of Measurement Studio and other NI products.
Thanks!
Tyler Tigue
Applications Engineer
National Instruments

Welcome to the Cisco CSR (Cloud Service Router) Discussion Forum

Welcome to the Cisco CSR (Cloud Service Router) Discussion Forum!
This forum helps CSR users interact, share knowledge and build communities with one another.
We hope you enjoy participating in the CSR discussion forum!
Best Regards,
Cisco CSR Product Team

hi,I have a question on sql database high availability. I have tried using database mirroring, where I am using sql standard edition, in this database mirroring of synchronous mode is the only option available, and it is giving problem, like sql time out errors on my applicatons since i had put in the database mirroring, as asynchronous is only available on enterprise version, is there any suggestions on this. thanks ---vijay

How Can I Delete my DIscussion Forum Account?

I would like to delete my discussion forum account. I cannot seem to find a method to do this.
Is there a way? Thanks.

Not as far as I know. Just don't use it.

Slow to a crawl in the Discussions Forum

Today has been maddeningly slow . It was taking a few minutes to just open a subject , a couple times I timed out and/or the site appeared to actually go down . I am finding it strange that I don't see much mention of this . At first I thought it was my eMac but the Powerbook was also slow and when I tried the PC , it to was slow . This is just in the Apple Discussions Forum everything else is fine so it's not AT&T
A search for "slow" showed up some problems in Nov. that were blamed on "code tweaking" so I assume this may be the same problem . Is there someplace that tells about current issues or problems ? Ebay mentions in advance when they will be doing maintenance .

Hi Kady
Thank you for the info . I thought it was my computer because I was having other troubles .
Was it memory leaks ? It would be nice if something could be posted when things slow down. Hear is some info I found ;
Well, I’m sure you guys and gals know this already, but spend half an hour on the Apple discussion boards at http://discussions.info.apple.com/webx?[email protected]@ , preferably accessing things like “my posts” or other search related activity and you will very soon find some nasty memory leaks.
Most people find that the ‘Real RAM” consumption of Safari goes up from a a few megabytes to over 200MB within 20 minutes or so., at which time very nasty slowdowns occur (40 secs to a minute to open a link on the pages, despite my 1500 ADSL link and an iMac G5 2 GHz with 2 gig of RAM. The problem causes these slowdowns even when I have more than a Gig of RAM completely free.)
A number of Apple Discussion Board Level 4’s have been discussing this problem and reporting exactly the same experience. We have been wondering whether to blame you, Apple , Javascript, or Web Crossing. Many people who use this board regularly are simply shifting to other browsers to avoid the problem.
The leak can be overcome to a large extent by disabling javascript, but this is a very annoying way to have to deal with the issue. Spend half an hour on these boards and I’m sure you will soon get some relevant information!
Cheers
Rod

Login issue in Apple Discussion Forum - Safari Only

I can no longer log into my Discussions Forum account using Safari (3.1.2). When I log in I am taken to the Create New User page, where I get stuck in a loop. I can log into my account just fine using Firefox 3, which is what I'm using to write this.
Please do not offer generic suggestions if you are not familiar with this specific issue. I don't want to hear advice about clearing my cache and cookies, etc. This issue has been reported several times in these forums and nobody has offered a viable solution.

Hi Walter
Forum software is not very multi-user friendly, nor (for sanity sake) encouraged. As you've discovered, switching from one user account to another requires deleting forum related cookies before logging in.
Curious why you have more than one user account?

Special Character in Subject Field of Discussion Forum

I am creating a new discussion, in the subject when i enter "Portal Discussion?" then it gives error that special character is not allowed. But i want to use the "?" in the subject at the time of creation.
After creating the discussion i can edit the same thing with special characters, then why SharePoint is not allowing to enter special character at the time of creation.

Hi
Refer this link
http://social.technet.microsoft.com/Forums/office/en-US/6e7a7eae-26fc-467f-bfdc-7c5d5ff49a95/discussion-forum-storing-special-character-in-title-differently?forum=sharepointdevelopmentlegacy
It seems that SharePoint will allow the Title of the discussion board to remain with the special characters, but the actual URL will not be allowed and will strip them from the final URL. SharePoint Manager easily shows this, btw.
So, there are probably many different ways to get what you are looking for, but one way could be to have a Linq query look for all Discussion Boards on a given site and then return the Title and the DefaultViewUrl, which the latter could then be prefixed by
the SPWeb.Url to give you something like "Testing? , /" for the title and http://mysite/Lists/Testing/AllItems.aspx (assuming
that is the actual default view) which you could then use as the final URL for your hyperlink in your web part.
In the code snippet below you can see the Linq query (which I assumed from your post that you need to query to find the Discussion Boards) and a simple DataTable that you could then use to populate a repeater or you just omit the DataTable and
enumerate the results from the query yourself:
var linqResults
= from list in oSPWeb.Lists.Cast<SPList>() where list.BaseTemplate
== SPListTemplateType.DiscussionBoardselect list;
DataTable oDataTable
= new DataTable();
DataColumn oDataColumn_Title
= new DataColumn("Title", typeof(string));
oDataTable.Columns.Add(oDataColumn_Title);
DataColumn oDataColumn_URL
= new DataColumn("URL", typeof(string));
oDataTable.Columns.Add(oDataColumn_URL);
foreach (SPList oSPList in linqResults)
DataRow oDataRow
= oDataTable.NewRow();
oDataRow[
"Title"]
= oSPList.Title.ToString();
oDataRow[
"URL"]
= oSPWeb.Url + oSPList.DefaultViewUrl.ToString();
oDataTable.Rows.Add(oDataRow);
oDataTable.AcceptChanges();
Please remember to click 'Mark as Answer' on the answer if it helps you

Error JBO-26080 with Discussion Forum portlet

Hi,
I'm getting an error with the discussion forum portlet.
This is one way I found to reproduce this problem:
- reply to a post in a forum
- do a search that should include the post added before in the result
- you should get this error
Unable to perform the operation: JBO-26080: Error while selecting entity for ThreadSearchEntityObject
Is this a known problem? Does anybody knows a fix/workaround?
Thanks in advance
Bye
Lorenzo

Hi Pedro,
I found the portlet on this page
http://www.oracle.com/technology/products/ias/portal/point_downloads.html
the one called "OracleAS Discussion Forum Portlet".
On this same page this forum is suggested to report problems.
I think this problem is due to some BC4J error, maybe a quick fix/workaround is possible, but I do not know this technology.
In the next day I'll try anyway to check the source, but I was also interested to know if somebody else has the same problem so to exclude the option of some installation/configuration problem of my deploy.
Thanks again
Bye
Lorenzo

What is the significance of the new feature in discussion forum as Kudos, solved and other which has been started?

hi,
I just want to know what to do with kudos and other features which has been started recently on discussion forums.
Why they have been started and how it helps in getting the solution of that query with which someone starts the post.
Thanks & Regards,
Samriddh Sarbalhi
Solved!
Go to Solution.

Duplicate Post

Issue in incoming email settings in discussion forum

hi,
I have enbaled incoming email settings in my discussion forum list.
i have sent a email with a subject, sent to the targeted-emailid to the discussion forum and its sent successfully.
But the users whom i want to share this discussion thread were not able to receive the email in return when someone posted a reply on this forum.
Pls let me know how to resolve this if its possible OOB. any settings / config changes i need to make it on the exchaneg server or SP Central Admin ?
also how to attach a file / [ attachments ] as a reply to this discussion forum thread.

If users want alerts email for some users, you need to set alerts or ask someone to set alerts
You can set alerts in behalf of other users as the administrator for list and inidividual items. Just set up an alert like you are setting it up for yourself...Use the drop-down menu to select "Alert Me", delete your name and enter in someone else's. If
the username textbox is greyed out, you don't have the proper permissions. I think you need to have the "Manage Permission" rights of the site which is included in the Manage Hierachy and Full Control permission levels.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0dba8b5f-11ec-4717-96df-8bb317db43ff/discussion-board-alert-me-need-only-about-new-threadsnot-messages
you can also try IAlertNotificationHandler interface to customize alert. If you don’t want to write code, you may consider using 3<sup>rd</sup> party tool about SharePoint
alert which you can find on the internet.
For more information, please refer to:
http://support.microsoft.com/kb/948321/en-us
http://blogs.msdn.com/sharepointdeveloperdocs/archive/2007/12/14/how-to-customizing-alert-emails-using-ialertnotificationhandler.aspx
If this helped you resolve your issue, please mark it Answered

Is there any way to programmatically get the discussion forum Id using API

Hi,
Can any one let me know how to get and set the Discussion service forum Id / category Id to the discussion task flow programmatically using services API's. Here I am using Web center groupspace API's to create and add members to group space from my fusion app. Added the discussion task flow to my fusion app and need to set the category Id / forum Id assigned to that groupspace and display the corresponding discussions. The test connections to discussion forum is success. I am getting all the forums corresponding to that user in my ui. But I want to get the forum that is associated with my groupspace.
thanks.

Never mind. Got the solution, can get this through servicesMetaData api.

Labview Discussion Forum Promotions

Similar Messages

Maybe you are looking for